Okna Aluminij nakup rabljenega (2.597)

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine! The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Equipment: - Large worktable, powerful drive motor - Two-button control for initiating the cutting process (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material support jaw can be moved backwards to increase cutting capacity - Large safety hood fully covers the working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable blade/feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Ljdpfx Acopa Nxde Ueaf Operation Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring the clamping cylinders up to 20 mm near the material 5. Clamp the material 6. Press the start button; the machine is ready for operation 7. Press and hold both SAW buttons; the material will be cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Technical data such as cutting range, output, etc. (see data sheet in email attachment). We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 650 HA, Semi-automatic The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 650 HA features a continuously adjustable miter range to the left and right up to 20° (pivoting range twice 70°). The saw feed operates automatically at the press of a button, while material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, optional accessories include a digital miter angle display, a marking laser, and a pneumatic device for lifting the safety hood. Equipment: - Double miter 20° – 90° – 20°, large support table - High-performance main drive motor - Two-button control for initiating the sawing cycle (optional one-button control available) - Clearly arranged control panel - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator Lasdsidun Dopfx Ac Usf - Fixed material fence can be repositioned to the rear to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. By pressing the start button, the machine is ready for operation. 7. Press and hold both SAW buttons; the material will be cut. 8. Upon cycle completion, release both SAW buttons and press the STOP button 9. Open the clamping vise and remove or advance the material You are welcome to visit and view the desired system in our manufacturing/demo hall at any time. Please feel free to contact us regarding this matter. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 352 P, manual The semi-automatic circular saw UK 352 P is an "upcut" machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials only to a limited extent). The machine is characterized by its ease of use, quick and convenient material change, and simple mitre angle adjustment. The UK 352 P features a continuously adjustable mitre range—up to 45° to the left and up to 0° to the right. The saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical clamping cylinders. The standard scope of delivery includes a minimum quantity lubrication system and an air blow gun for cleaning the machine. The machine is equipped with connections for a chip extraction system. Features: - Manual guidance of the saw blade - Double mitre 30° – 90° – 0°, large support plate - High-performance drive motor - Clearly structured control panel - Two vertical pneumatic clamping cylinders - Fixed material stop, can be moved back to increase cutting capacity - Large protective cover, fully shields the working area - Minimum quantity lubrication system Lajdpfeidunvsx Ac Usf - Air blow gun for cleaning the machine - Saw blade Ø 350 mm Work Process: 1) Set the cutting angle 2) Insert the material 3) Position the clamping cylinders up to 20 mm from the material 4) Pneumatically clamp the material 5) Press the start button to activate the saw blade 6) The cutting operation must be carried out manually using the hand lever 7) After completing the cut, switch off the machine! You are welcome to inspect the desired machine in our production/demo hall at any time. Please feel free to contact us regarding this. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for cutting profile materials made from cast aluminum, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its user-friendly operation, quick and convenient material changes, and easy miter adjustment. The UK 352 HA features a stepless miter range adjustable from left up to 45° and right up to 0°. Saw feed is automatic at the press of a button, while material clamping is provided by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum-quantity lubrication system and an air spray gun for machine cleaning! Connections for a chip extraction system are provided as standard. Equipment • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Includes 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device • Mist lubrication system for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 125 mm Ljdpfx Acegwt Rrs Ujaf • Saw blade: 350 mm • Saw blade not included in the scope of delivery! You are welcome to inspect the desired machine in our production/demonstration hall at any time. Please do not hesitate to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 352 M, manual The manual circular saw UK 352 M is an "upcut" machine, primarily used for single cuts on aluminum and copper profiles as well as hard plastics (solid materials only to a certain extent). The machine stands out thanks to its easy operation, quick and convenient material changeovers, and simple miter angle adjustment. The UK 352 M offers a continuously adjustable miter range of up to 45° to the left and up to 0° to the right. The saw feed is manual via a hand lever, and material clamping is also done manually. Equipment - Double miter 45° – 90° – 0° - Large support table - Powerful drive motor - Clearly arranged control panel - One manual clamping cylinder - Fixed material stop jaw can be shifted backwards to increase cutting capacity - Large protective hood covering the entire working area - Saw blade diameter: 350 mm Working process 1) Set the cutting angle 2) Insert the material 3) Manually clamp the material 4) Press the start button to power up the saw blade 5) Perform the cut manually using the hand lever 6) After finishing the cut, switch off the machine! Lodpfx Aeidunnsc Ueaf You are always welcome to view the desired machine in our production or demonstration hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profiles made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by its intuitive operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-400 A features a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed is automatic and activated by pressing a button, while the material is secured by two pneumatically operated vertical and horizontal clamping cylinders each. The standard configuration for this machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic device for lifting the protective hood! Equipment • Precision under-table circular saw • Continuously adjustable mitre angles: 0º/45º/90º/-45º/-60º • including 2 pneumatic clamps (vertical) • Infinitely variable saw blade feed • Two-hand safety operation • Adjustable rear material stop • Chip extraction device for chip extraction system Laodpfx Aegwt Rnsc Uof • Mist spraying unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included! You are welcome to inspect the desired unit at any time in our production/showroom facility. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for separating profile materials made of cast aluminum, copper, and hard plastics (to a limited extent, solid materials). The machine is distinguished by its user-friendly operation, rapid and convenient material change capability, and easy mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. The saw feed is automatically driven at the push of a button, and material clamping is performed by two pneumatically operated vertical clamping cylinders. As standard, this machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. The machine is prepared for connection to a chip extraction system. Features • Precision under-table circular saw • Mitre adjustment: left 45°, 90°, right -45° • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control system • Adjustable rear material stop • Extraction system for chip extraction unit • Mist spray system for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade Ø 350 mm • Saw blade not included! Lasdpfx Asgwt Ryoc Uof We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, pritisk: 6 letvica, The semi-automatic circular saw UK-600-A is an “upcut” machine, primarily used for cutting profile materials made of aluminum casting, copper, and hard plastics (to a limited extent, also solid material). This machine is characterized by its ease of operation, quick and convenient material change, and straightforward miter angle adjustment. The UK-600 A features a continuously adjustable miter range of up to 20° to the left and right (swivel range of two times 70°). Saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine comes equipped with a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are also provided. Additionally, this machine can optionally be equipped with a digital miter angle display, a line laser, and pneumatic hood lifting. Features: • Precision underfloor circular saw • Stepless miter adjustment 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Continuously adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction system—chip extraction connection • Mist spray device for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Maximum cutting height 230 mm • Saw blade 600 mm • Saw blade not included! Lodpfx Acogcbwgj Uoaf You are welcome to view the desired unit at any time in our production/showroom. Please contact us for an appointment. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 500 HA is an “upcut” machine, predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (suitable for solid material to a certain extent). The machine stands out for its ease of use, fast and convenient material change, and simple mitre angle adjustment. The UK 500 HA offers a continuously adjustable mitre range from 30° to the left up to 0° to the right. The saw feed is automatically operated by pressing a button, while material clamping is achieved with two pneumatically controlled vertical and horizontal clamping cylinders each. The standard configuration of this machine includes a minimal lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are provided on this machine. Features • Precision underfloor circular saw • Continuously adjustable mitre adjustment at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device for suction unit • Air-oil mist lubrication unit • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 180 mm • Saw blade 500 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our manufacturing/demonstration hall. Please feel free to contact us. Lodpegwt R Djfx Ac Usaf We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw BC 450 HA, Semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swiveling range of 45° to the left and 22.5° to the right and automatic miter adjustment via stop functions. The saw feed operates automatically, and the material is clamped pneumatically. The saw blade (450 x 30 mm) operates horizontally. Additionally, this machine can optionally be equipped with a digital miter angle display, a marking laser, and a pneumatic safety guard lifting system! Features - Double miter saw with a powerful drive motor - Two-button control for triggering the sawing cycle (optionally also available as a single-button control) - Large miter range from -22.5° to +45°, swivel range 67.5° – 0° – 45° - Automatic miter adjustment, fixed stop functions at -45° / 90° / +45°, plus two variable stop functions adjustable to the desired angle! - Two horizontal pneumatic clamping cylinders Lasdpfopa Nxajx Ac Usf - Clear and accessible control panel - Large safety guard covering the entire working area, lifted pneumatically - Adjustable blade feed rate - Connections for extraction system - Minimum quantity lubrication system - Air gun for machine cleaning - Saw blade diameter 450 mm Operating Process 1. Set the cutting angle 2. Insert the material 3. Adjust the feed rate 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button 7. Press and hold both SAW buttons to cut the material 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 800 HA, Semi-Automatic The semi-automatic circular saw UK 800 HA is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (limited suitability for solid materials). The machine is characterized by its easy operation, quick and convenient material change, and simple mitre angle adjustment. The UK 800 HA offers a continuously adjustable mitre range to the left and right up to 20° (swivel range of two times 70°). The saw feed is actuated automatically at the press of a button; material clamping is provided by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum quantity lubrication system and an air blow gun for machine cleaning come as standard equipment! The machine is also equipped with connections for a chip extraction system. Additionally, optional features include a digital mitre angle display, a laser marking system, and pneumatic lifting for the safety hood. Equipment - Double mitre 20° – 90° – 20°, large support table - High-performance drive motor - Two-button control for saw activation (optional one-button control available) - Clear control panel - Adjustable blade feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material stop can be moved backward to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade diameter: 800 mm Lajdpfxoidun Io Ac Uof Workflow 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Move the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the START button to ready the machine 7. Press and hold both SAWING buttons to initiate cutting 8. After the cycle, release both SAWING buttons and press the STOP button 9. Open the clamping vice and remove or advance the material You are welcome to inspect the desired equipment at any time in our production/showroom. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material possible to a limited extent). The machine stands out due to its user-friendly operation, quick and convenient material change, as well as easy mitre angle adjustment. The UK 352 HA offers an infinitely adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the press of a button, and material clamping is provided by two pneumatically operated vertical clamping cylinders. As standard, the machine comes equipped with a minimum-quantity lubrication system and an air blow gun for machine cleaning! Connections for a chip extraction system are also available on this machine. Equipment • Precision under-table circular saw • Mitre adjustment: 45º left / 90º / 45º right • Incl. 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device interface • Mist spraying system for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm Lodpfegwt Rvex Ac Usaf • Saw blade not included! You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us. Plantec Maschinen GmbH

Stanje: novo, Comparable to Emmegi, Elumatec, Pressta-Eisele, Pertici, Fom, etc. 3 NC axes for length as well as electronic tilting of the saw blades outward 22.5° and inward 135° Cutting length: 5000mm Processing of single cuts Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB drive or network Automatic mitre function / incremental cutting Processing excess-length cuts Short cuts from 5mm cutting length Cross cuts Manages printing of labels with data or barcodes Hydropneumatic saw blade feed, infinitely adjustable Pneumatic safety covers Traveling roller conveyor at the right saw unit with additional clamping cylinder Length positioning taking saw angles and profile height into account Profile height measurement with length compensation incl. horizontal clamping cylinder Each saw unit with one horizontal and one vertical clamping cylinder Additional horizontal clamping cylinder on the fixed left saw unit, to the left of the saw blade 1 piece profile support between saw units, pneumatically swiveling With two-hand operation IPC with Windows Embedded and HMI 15.0" touchscreen Lasdownfvtspfx Ac Ujf Including the following options: Minimal quantity spray devices Label printer Network connection for teleservice, 1-year subscription We always have compatible extraction systems in stock—also for existing aluminium saws!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.900 kg, skupna višina: 25.000 mm, skupna dolžina: 2.710 mm, skupna širina: 1.040 mm, vhodna napetost: 400 V, We offer a powerful, slow-speed twin-shaft shredder specifically designed for the efficient and precise processing of aluminium, including: 🔹 Rods 🔹 Stranded wires 🔹 Wires 🔹 Flat stock 🔹 Cables The specially engineered shredding system prevents material from being pulled or crushed—aluminium is efficiently cut, not compressed. The knife system ensures clean and precise cuts, preventing vertically fed material from passing through the chamber unprocessed. The blades are manufactured from certified, wear-resistant steel. The shredder is equipped with geared motors from a renowned manufacturer. Lajdpfx Ajtvdcyoc Usf Available motor options: 2 × 18.5 kW or 2 × 22 kW. Fraction size – configurable to customer requirements. Model RS8: working shaft length 600 mm – identical construction to the RS800 and RS1200 models. Made in Poland.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, - Double miter circular saw ADS Type M - 2 saw heads - Max. cutting length 5000 mm Lajdpfx Aoucuhdoc Uof

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 5.000 mm, dolžina podajanja os X: 500 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.800 obr/min, priključek za stisnjen zrak: 7 letvica, Brez najnižje cene – zagotovljen prodaja po najvišji ponudbi! TEHNIČNE PODROBNOSTI Premer žage: 500 mm Število vrtljajev: 2.800 vrt/min Dolžina podajanja na cikel: 5.600 mm Kot reza: 90° Funkcija nagiba glede na konfiguracijo stroja PODROBNOSTI O STROJU Primerni materiali: aluminijasti profili, tankostenični profili iz lahke kovine, profili za okna in vrata Napajanje: 230/400 V, 3~ Ljdpfjzqbltox Ac Usaf Frekvenca: 50 Hz Priključek za stisnjeni zrak: 7 bar OPREMA Odsesavanje žagovine

Stanje: novo, Leto izdelave: 2026, Nadgradite svojo proizvodnjo aluminija z žago za hitro, varno in skladno rezanje, ki izpolnjuje zahteve za varnost in zdravje pri delu (OHS). A420 je enostavna žaga za razrez aluminijastih profilov manjših dimenzij, bodisi naravnost ali pod kotom (do ±75°). Zagotavlja izjemno varnost z dvoročnim vodenjem reza in popolno zaščito žaginega lista (vključno z varnostnimi tuneli dolžine 900 mm na vsaki strani), ki preprečujejo dostop do žage in nenadzorovano izmetavanje odrezkov. Pnevmatsko dvigovanje in spuščanje zaščitnega pokrova zgolj s pritiskom na gumb. Varnostno stikalo preprečuje delovanje žage pri dvignjenem pokrovu. • Žagina plošča Ø420 mm iz trde kovine (TCT) z 2,2 kW pogonskim motorjem • Skladnost z varnostnim standardom AS / NZS 4024:2014, delo z dvoročnim upravljanjem • Zgornji varnostni pokrovi s tuneli, vsak 900 mm na svoji strani • Dvigovanje zaščite s pritiskom na gumb za nemoten dostop do delovne mize • Varnostno stikalo izklopi žago ob dvignjenem pokrovu • 2× vertikalna in 2× horizontalna prijemala z nastavljivim pritiskom Ljdpemb U Tbsfx Ac Ueaf • Nastavljiv kot rezanja (mitra) do ±75° • Premična zadnja ograja za povečano kapaciteto rezanja • Sistem pršenja-meglice za mazanje žaginega lista • Pnevmatska pištola za čiščenje in notranja LED osvetlitev • Priključek Ø100 mm za odvod ostružkov • Opcijsko: 2,2 kW ektraktor za odsesavanje ostružkov Idealen za: • Proizvodnjo oken in vrat • Proizvodnjo pisarniške opreme • Sestavljanje podatkovnih centrov • Proizvodnjo linearne razsvetljave • Proizvodnjo senčil in zaves • Predelavo kompozitnih materialov

Stanje: novo, Leto izdelave: 2026, Steigern Sie Ihre Produktivität beim Aluminiumsägen mit einer der flexibelsten und leistungsstärksten Sägen auf dem Markt. Die A550 ist speziell für Gehrungsschnitte mit großem Winkelbereich konzipiert und bietet Ihnen einen enormen Säge-Gehrungsbereich von ±75°. Unterstützt durch ein großdimensioniertes Sägeblatt erhalten Sie echte Hochwinkel-Kapazität – ohne Kompromisse bei der Schnittgröße Ihres Aluminiums. Ideal für das Bündigschneiden mehrerer Profile gleichzeitig und für höchste Präzision ausgelegt. Hochgeschwindigkeits-Aluminiumbearbeitung mit präziser, SPS-gesteuerter Bewegungsführung. Pneumatisch betätigte Sicherheitsabdeckung: Öffnen und Schließen per Knopfdruck für vollständigen, ungehinderten Zugang zum Sägetisch. Sicherheitsschalter deaktiviert die Säge bei geöffneter Schutzhaube. Optional: CNC-gesteuerte Gehrungswinkelverstellung mit Touchscreen-Bedienfeld. • Ø550 mm Hartmetall-Sägeblatt mit 4 kW Antriebsmotor • AS / NZS 4024:2014 Sicherheitsstandard, Zweihand-Bedienung für den Schnittvorgang • Überkopf-Sicherheitsabdeckung mit Schutztunneln, je 900 mm beidseitig der Säge • Sicherheitsabdeckung pneumatisch anhebbar per Knopfdruck • Sicherheitsschalter deaktiviert Sägefunktion bei angehobener Abdeckung • 2x vertikale und optional 2x horizontale Spannzangen mit einstellbarem Spanndruck • Gehrungsbereich ±75° mit Rastpunkten bei 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Sprühnebel-Kühl-/Schmiersystem für das Sägeblatt • Druckluftpistole und LED-Innenbeleuchtung • 2× Ø100 mm Anschluss für Späneabsaugung • Optional: 2,2 kW Späneabsauger • Optional: Automatisches Gehrungseinstellungssystem Hervorragend geeignet für: • Fenster- und Türenherstellung • Herstellung von gehrungsverschraubten Aluminiumkonstruktionen • Fertigung von Aluminium-Strukturen Lajdpfx Aomb U Tfsc Ujf • Verbundwerkstoffbearbeitung • Produktion von Jalousien, Sonnenschutz und Möbeln • Aluminiumeinzelhandel

Stanje: novo, Leto izdelave: 2026, Ne glede na delo, ki ga morate opraviti, je A700 edina žaga, ki jo boste kdaj potrebovali. Z največjo zmogljivostjo v svojem razredu in izjemnim razponom kotov zamika ±75º je zasnovana za pravo rezanje pod visokimi koti brez kompromisov glede velikosti aluminijastih profilov, ki jih je treba rezati. Primerna je za rezanje več profilov hkrati v snopu z visoko natančnostjo. Laedpemb U Tusfx Ac Uof Hitro obdelovanje aluminija z natančnim PLC krmiljenjem gibanja. Pnevmatsko vodena varnostna zaščita se odpira in zapira s pritiskom na gumb ter omogoča popoln in neoviran dostop do žagalne mize. Varnostno stikalo onemogoči delovanje žage ob dvigu zaščite. Izbirno CNC-krmiljeno pozicioniranje kota zamika žage z nadzorno ploščo na dotik. • Ø700 mm TCT žagin list s 4 kW pogonskim motorjem • AS / NZS 4024:2014 varnostni standard, dvoročno rezanje • Nadglavna varnostna zaščita z varnostnimi tuneli po 900 mm na vsaki strani žage • Varnostna zaščita se pnevmatsko dvigne s pritiskom na gumb • Varnostno stikalo onemogoči delovanje žage pri dvignjeni zaščiti • 2x vertikalna in opcijsko 2x horizontalna vpenjala z nastavljivim pritiskom • Kot zamika ±75° s fiksnimi pozicijami na 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Sistem za brizgalno mazanje žaginega lista • Pihalna pištola za zrak in notranja LED osvetlitev • 2 × Ø100 mm priključka za odvod ostružkov • Opcijski 2,2 kW odsesovalnik ostružkov • Opcijski avtomatiziran sistem za krmiljenje zamika Izjemno primerna za: • Serijsko proizvodnjo aluminija • Proizvodnjo aluminijastih konstrukcij pod kotom • Proizvodnjo oken in vrat • Proizvodnjo žaluzij, senčil in pohištva • Proizvodnjo varjenih aluminijastih konstrukcij • Proizvodnjo aluminijastih fasad

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length Laedpfx Aceuiy Hrj Uef - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Year of overhaul: 2024 Maximum saw blade diameter, carbide-tipped: 500/550 mm Saw motor power: 6 kW Saw motor speed, 6 steps: 2400–3200 rpm Saw blade cutting speed (500–550mm): 3800–5500 m/min Saw blade feed, stepless adjustment: 0–40 mm/s Saw height adjustment, stepless and fully electronic Working range, square material at 90° max.: 160 x 160 mm Laedpfouiy Rqsx Ac Uef Working range, flat material at 90° max.: 380 x 60 mm Working range, round material at 90° max.: 165 mm Feed length: 10–9999 mm Feed speed, AC servo max.: 400 mm/s Compressed air supply required: 6 bar Weight (saw): approx. 2850 kg Dimensions LxWxH (saw): approx. 2900 mm x 1725 mm x 2200 mm Required floor space LxW: 2900 mm x 1725 mm Following a completed retrofit, the machine is in like-new technical and optical condition. Thanks to its features and robust design, the machine is highly versatile and can be used efficiently across a wide range of applications. The positioning system ensures easy and highly cost-effective operation of the unit. The powerful drive motor enables short cycle times, even when sawing thick-walled profiles or solid materials. The sound enclosure minimizes operational noise emissions to an absolute minimum. The machine will be fully overhauled in our facility according to customer requirements. The following work has been carried out, among others: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator panel - Replacement of ball screw spindle - Replacement of servomotor and servo drive - Replacement of the main drive frequency inverter (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve manifolds - Overhaul of extraction system - Overhaul of minimum-quantity lubrication system - Replacement of general wear parts - Overhaul of noise enclosure Additional features: - Sound enclosure - Mechanical zero-point adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Chain magazine for 4/6m materials - Saw kerf extension (for a high-quality cut surface without return marks) - Horizontal clamping for the saw line - Squaring stop in the material feed unit - Reinforced motor, 11 kW - Roller conveyors - Delivery and installation at your premises - Staff training

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Manufacturer: Elumatec Type SA / SAS 142 Year of Retrofit: 2024 Max. Carbide Saw Blade Diameter: 500 mm Saw Motor Power: 4 kW Saw Motor Speed: 2800 rpm Saw Blade Cutting Speed (500 mm): 4400 m/min Saw Height Adjustment: Infinitely variable, fully electronic Working Area Square 90° max.: 130 x 130 mm Working Area Flat 90° max.: 190 x 130 mm Working Area Round 90° max.: 150 mm Pneumatic Feed Length: 5–560, 10–1120 mm Compressed Air Connection Required: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900 mm x 1400 mm x 1500 mm Footprint LxW: 2900 mm x 1400 mm Additional Description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics Following the completed retrofit, the machine is in as-new condition both technically and visually. The machine is completely overhauled at our facility to customer specifications. Among other upgrades, the following components have been renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve assemblies - Maintenance of minimum lubrication system - Replacement of general wear parts Lajdpjuiy Nysfx Ac Uof - Refurbishment of the safety enclosure Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and wear parts are excluded from the warranty. Optional: - Extension of the cutting range for flats at 90° max.: 300 x 120 mm - Spacer extension (for a premium cut surface without drag marks) - Servo-driven material feed - Servo-driven saw blade feed - Heavy-duty clamping device for material feed pusher - Delivery and installation at your facility - Operator training for your staff

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, Oprema: dokumentacija / priročnik, Tehnične podatke in rezalni diagram lahko prenesete ob strani. 730 mm na hod, omejeno na 3 ponovitve. Žagine liste Ø 500 x 4,4 x 30 mm. Rezanje le pod kotom 90°. Maksimalna dolžina reza pri 3 ponovitvah: 2180 mm. Lodpfxoy D Sywo Ac Uoaf

Leto izdelave: 2017, stanje: rabljeno, Pneumatic material feed Feed length: 800 mm (multiple strokes possible, max. 2,400 mm) Ljdekrgiujpfx Ac Ujaf Max. saw blade diameter: 500 mm Cuts possible between 45° and 90° Saw blade speed: 2,850 rpm Infinitely variable saw feed Minimum quantity lubrication system Piece counter with automatic shut-off Weight: 600 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm - Max. profile width up to 530 mm, profile height up to 270 mm Ledpfjx Eb Anex Ac Ujaf - Saw blade feed hydro-pneumatically adjustable from the outside - Feed movement radial from bottom to top - Saw motor drive power 7.5 kW - Infinitely variable saw blade speed - Metered spray unit - 2 vertical and horizontal clamping units, each with clamping pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually opening safety guard Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with hood open: 2450 mm PD200-E-7 length measuring system - Usable as a stop or as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target size, actual size and piece count - Positioning accuracy 0.1 mm/m - Piece counter for number of completed parts/cuts