Odrezovalno Glavo nakup rabljenega (697)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Mayer FH2-3120 Veneer Saw, precision fine-cut saw with jointing unit (planing unit) and veneer alignment table Robust Mayer industrial construction A video of the machine in operation can be provided upon request. For splinter-free and joint-tight cutting of veneer, including thick-cut veneer Max. cutting length 3100 mm Saw unit and jointing unit are combined in a single module, so only one unit needs to be moved. Easy-to-handle saw unit, running on linear guides. Rear support table with through-type finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital readout Pneumatic workpiece clamping Saw drive motor 1.8 kW, jointing/planing unit 1.0 kW Hnjdpfx Aoyug Hredkoi Motors can conveniently be switched on at the hand grip, so they only run when required Fine-cut blade equipped with carbide tips, sharpened Planing head Z4, fitted with new carbide reversible inserts Practical front veneer tray, extendable for planing unit 100 mm extraction port with extraction duct Extraction hoses and V-belts replaced Pneumatic maintenance unit replaced CE marking Operating manual On-board tools Original paintwork, only minor touch-ups Approx. dimensions: 4350 x 1700 x 1400 mm (LxWxH). Weight approx. 800 kg. The machine can gladly be demonstrated at our facility by appointment. We only offer machines that are ready for demonstration in our warehouse. See “more offers from this supplier” for additional machines.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Leto: 2006 - tehnično učinkovit, pripravljen za delo – po celovitem servisu Hsdpfjyu R Elsx Adkeni - omejitev zareza: 0,2–2 mm - največja dolžina varjenja: 2600 mm - podporne roke - PLC krmilnik

Stanje: zelo dobro (rabljeno), Prodajam profesionalni nosilec orodja SK40 (oznaka: 83 814 114, SK-40 Ø14x80, št. 12409096) z nameščenim valjasto-čelnim rezkarjem VHM Ø14 mm. Nosilec je ventiliran, kar zagotavlja učinkovito hlajenje in daljšo življenjsko dobo orodja. Karbidni večrezni rezkar v zelo dobrem stanju – idealen za obdelavo jekla, litega železa, nerjavnega jekla in drugih trdih materialov. Stanje: rabljen, popolnoma delujoč. Hnsdpfxow Rrxxj Adkoi

Stanje: dober (rabljeno), Drilling machine, pillar drilling machine, column drilling machine, multi-spindle head, multi-spindle drill head, drilling gearbox -with two-spindle drill head, manufacturer: Sigloch Schrieder, type: V602 Hnsdec Rpnnspfx Adkei -Drive power: 1.02/0.88 kW -Drill spacing adjustable: 18–110 mm -Max. drill diameter: 2x Ø 6 mm -Table size: 275 mm -Spindle taper: MK3 -Throat depth: 220 mm -Speeds: 100–2900 rpm -Column diameter: Ø 100 mm -Spindle stroke: 75 mm -Gearbox -Dimensions: 900/400/H1910 mm -Weight: 230 kg

Stanje: rabljeno, 4-axis CNC drilling and milling machine IXION type 30 CNC W VMC, machining center Year of manufacture approx. 1997, machine overhauled in 2020 Travels: X: 600 mm, Y: 350 mm, Z: 600 mm Table size: 800 x 400 mm T-slot spacing: 75 mm Table load capacity: 300 kg Spindle taper: SK 40 (drawbar DIN 69872 A) Spindle speed: 20–5000 rpm Max. spindle torque: 150 Nm Max. spindle nose to table distance: 660 mm Feed rate X, Y, and Z: 0 – 5000 mm/min, stepless Rapid traverse X, Y, and Z: 15,000 mm/min Tool change time: approx. 5 sec Chip-to-chip tool change time: approx. 7.5 sec Milling capacity in St 60: 150 ccm/min Drilling capacity in St 60: 35 mm Thread cutting capacity in St 60: M24 Spindle motor power: 5 kW (10 kW at 25% duty cycle) Power supply: 400 Volt, 50 Hz - CNC control: Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - Hydro-mechanical tool clamping - Rotary axis as dividing attachment on the table = 4th axis, MECATECNICA type DCN 250-8, 3-jaw chuck Ø 200 mm Rotation speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump Hnodpfx Aeu Tln Njdksi - Control cabinet fixed to the machine Transport dimensions: Length 320 cm x Width 230 cm x Height 300 cm Machine footprint with chip conveyor (L x W x H): 3200 x 3100 x 3000 mm Machine weight: 3,100 kg Chip conveyor weight: approx. 200 kg Good condition

Stanje: rabljeno, Leto izdelave: 1986, številka stroja/vozila: 104, 1-spindle paper drilling machine by Foellmer, year of manufacture 1986, serial number 104 4. Online video inspection available via Skype. We would be pleased to welcome you for an on-site visit—additional machines in stock. Immediately available—can be inspected and tested at our location in Emskirchen / Nuremberg. Hedpfx Adsh Aw Unjkeni

Stanje: rabljeno, številka stroja/vozila: 13164, 1-spindle paper drilling machine - 1-head spindle paper drilling Nagel Citiborma 150, Serial-No. 7404 Online video inspection via Skype possible. We would be pleased to welcome you for a visit – more machines in stock. Hsdpfx Aoh Aw Ugedksni Available immediately – machine can be inspected. Located in Emskirchen / Nuremberg – testing on site possible.

Stanje: rabljeno, Leto izdelave: 1996, 1-head drilling machine Serial No. KSE124 Online video inspection via Skype We would be pleased to welcome your visit – more machines available in stock Hjdpetzc Hmjfx Adkjni Available immediately – Machine can be inspected In stock at Emskirchen / Nuremberg – Can be tested on site

Stanje: rabljeno, številka stroja/vozila: 13270, 1-Kopf Papierbohrmaschine Nagel Citiborma Baujahr - Seriennummer S129 Online-Video-Inspektion per Skype-Video möglich Hodpsh Aw Uksfx Adksni Wir freuen uns sehr auf Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – kann besichtigt werden Lagerort: Emskirchen / Nürnberg – Vorführung/Test vor Ort möglich

Stanje: rabljeno, številka stroja/vozila: 304486, 1-spindle paper drilling machine / 1-head spindle paper drill LIHIT MC 1015 Online video inspection via Skype video We would be very pleased to welcome you for a visit – more machines available from stock Hjdpfxjh Axxqs Adkeni Immediately available – Can be inspected In stock in Emskirchen / Nuremberg – Can be tested

Stanje: zelo dobro (rabljeno), Max. turning diameter: 20 mm Max. turning length: 320 mm Spindle bore: 24 mm Spindle speeds: 200–10,000 rpm Turret with 10 positions, all driven LNS bar feeder Hodpfommdacsx Adksni Various accessories MARCELS MASCHINEN AG

Stanje: rabljeno, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary Table with SIEMENS Control Machine No. P 81 – 5458 Year of manufacture: 1982 / 2009 Maximum rivet shank diameter: 12 mm Hsdpfx Adsdzp T Nskoni Tool shank diameter: 16 mm Throat depth: 190 mm Rivet head stroke per riveting unit: approx. 60 mm Rivet spindle speed: approx. 1400 rpm Maximum installation height (tool to counter-tool): 80 mm Compressed air requirement: 6 bar Motor output per riveting unit: 1.1 kW Electrical connection: 380 Volt, 50 Hz - Rotary indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit adjustable in the machine frame relative to the rotary table - Table size: Ø 295 mm for mounting round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with leadscrew, positioning via adjustable microswitch - Modernized control and conversion to servo drive on the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel – built 2009 - Riveting time infinitely programmable - Riveting pressure continuously adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space requirement (L x W x H): 3200 x 1250 x 2400 mm Weight: approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. Segments were manually positioned onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically indexes to the next working position. Ideal for saw blade manufacturers and repair shops. Also suitable as a basis for building a special-purpose machine.

Leto izdelave: 1993, stanje: dober (rabljeno), BFM underwater pelletizer head for granulating PE, PS, PA, etc. Hjdpfsipyh Iox Adkeni

Stanje: dober (rabljeno), Vijaki, šestrobni vijaki, cilindrični vijaki z notranjim šestrobom, imbusi vijaki Hnedpfeiqpyfsx Adksi - Šestrobni vijaki: M20 700 kg - Velikosti/količina: M20 x 65 do M20 x 160, glejte seznam kosov na fotografiji - Kakovost: 8.8 črni oz. pocinkani - Proizvajalec: različni - Cena: komplet - Skupna teža: 700 kg

Stanje: rabljeno, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S, 25 mm stroke with Heidenhain measuring system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50/60 Hz Connected load: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (stand-alone, detachable control device) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault control and process monitoring - Monitoring of current, voltage, power, and energy - Test impulse for part recognition - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated capacity: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force initiation from 1.2 to 550 N - Heidenhain displacement measuring system Welding unit with 5 pneumatic cylinders and Festo valve manifold Type CPX Welding head mounted on horizontal guide rail and can be shifted 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 with 46 mm stroke, 1 with 20 mm stroke). Projection distance of welding tip: 300 mm Welding tip height above floor: 315 mm Hsdpfxspy Uzyo Adksni Welding unit dimensions W x H x D: 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 almost identical units available, price per complete unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Prodajam drobno-rezno mini žago NEVA TR88 Orbit plus, letnik 2005. Konfiguracija z rezkalnimi glavami zgoraj + spodaj 1,5 + 1,5 kW, primerna tudi za kasnejšo proizvodnjo lepljenih lamel. Glavni motor 15 kW Delovna višina 255 mm Digitalno nastavljanje delovne višine z ELGO električnim pozicionerjem. Digitalno nastavljanje podajalne hitrosti z MKS. Skupna teža 2800 kg. Hsdsiuc Scjpfx Adkeni Veliko dodatne opreme, žagine liste in nastavitvene elemente z nastavitveno napravo vključno. Stanje zelo dobro. Popolnoma delujoč stroj. Izdelano na Češkem.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 300 mm, Naprodaj je začetni elektroerozijski vrtalni stroj bes S 43-3 Lastnosti - visoka hitrost vrtanja - majhna obraba elektrod Velikost mize (širina x globina): 450 x 210 mm Hodi X/Y/Z: 290 x 190 x 350 mm Motorizirana groba nastavitev Z: 250 mm Največja višina obdelovanca: 245 mm Največja teža obdelovanca: 200 kg Nastavitev vodila elektrode: 150 mm Premer elektrode: 0,3 – 10 mm Zunanje mere stroja: 1030 x 800 x 2100 mm Neto teža stroja: 600 kg Filtracija: kanister 20 l (standard) Hnjdpfx Adjir Eadeksi Programabilna Z-os standard Več strojev takoj na voljo.

Stanje: dober (rabljeno), SAIMP high-speed head milling machine Digital readout included Hjdpfx Aoimq Eqjdkoni Complete with vise

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, število vreten: 35, Večvretenski vrtalni stroj z 1 glavo MAGGI model BORING SYSTEM 35 - 35 vreten s fiksnim medosnim razmakom 32 mm - Leto izdelave: 2018 Hsdpfx Adjx Rcqgekjni

Leto izdelave: 2013, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6310, CNC - mostna žaga z rotacijsko glavo SPRINT 456 Vakuumski manipulator 500 kg X-os: 4.150 mm Y-os: 4.550 mm Z-os: 600 mm Pogonski motor vretena: 18,5 kW Vrtalna enota z levim navojem 1/2'' Programska oprema EasyCut / EasyStone Premium Delovna miza: 4.140 mm x 2.000 mm (nagibna miza) Dodatna razširitev mize: 4.140 mm x 1.200 mm Podtalna žaga Hnodpfxeyhlc Ss Adksi Jekleni temelji Enota za merjenje debeline plošče Merjenje rezila žage Klimatska naprava Sistem digitalizacije plošč Pršilna letev

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Diameter x width: 750 x 1,500 mm Max. operating pressure: 300 bar Hsdpfx Adjqnvtzskoni Cutting force: 60 kN Weight: approx. 2,800 kg 76 chisels

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Max. output capacity: 1,400 bottles/hour, format set for PET can lids: 100/127 mm, can diameter: 147.4/182 mm, pitch circle diameter: 530 mm, operating hours: approx. 500 h, with documentation. Hnodpfx Adsi A Iykekei

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Dust Extractor for Blast Cabinet Sandblasters – Complete Unit with Motor and Filter This dust collector is a comprehensive extraction solution equipped with a motor and filter, ensuring efficient removal of dust and particles generated during blasting operations. It significantly improves visibility inside the blast cabinet and eliminates dust leakage, creating safer and more hygienic working conditions. Particularly suitable for large-volume blast cabinets, this unit ensures a clean environment and optimal operational safety. Device Description The dust extractor designed for blast cabinet sandblasters is a fully integrated solution featuring a powerful motor and high-efficiency filter. It is ideal for a wide range of blasting applications, especially in large-scale enclosures where dust management is crucial. The advanced design efficiently draws dust directly from the sandblaster, resulting in improved visibility during operation and preventing dust from escaping the working area. This enhances workplace hygiene and safety by providing a cleaner and healthier atmosphere for operators. The built-in motor delivers robust suction performance, ensuring reliable and effective extraction of media dust, while the filter retains fine particles to prevent their recirculation into the cabin’s air. This offers superior protection for operators against inhalation of hazardous substances and maintains high air quality within the blasting area. Hnodpfx Adorh E Azskoi The dust collector is not only a highly effective cleaning solution, but it also enhances occupational safety and increases both the efficiency and precision of blasting operations. Technical Data Extraction Power: 1100W Airflow Capacity: 3 m³/min Power Supply: 230 V / 50 Hz Noise Level: 85 dB Inlet Diameter: 52 mm Handle Length: 280 mm Collector Dimensions (H x D): 730 x 260 mm Filter Dimensions (H x D): 310 x 170 mm Weight: 9.5 kg Please note: The price stated is net (excl. VAT) and does not include shipping costs. For more information, please contact us via phone or email. Visit our website to view the full product range.

Stanje: rabljeno, Leto izdelave: 2018, Tornos CT20-5 CNC stružnica z gibljivo glavo. Serijska št.: 2470010007 (2018) Država izvora: Švica s krmilnikom Fanuc Series Oi-TD, podajalcem palic Robobar SBF 326-3.2m, sistemom za gašenje požara Kraft & Bauer, transporterjem za odrezke LNS Turbo HB. Serijska št.: 1757000525 (2014) Država izvora: Kitajska, enota za filtracijo olja SEI CMC 400J-S2. Država izvora: Italija, komplet za konverzijo brez vodilne puše, 4893 delovnih ur. Lokacija: Ta lot se nahaja v Birminghamu, VB. Strošek 450 £ za razstavljanje in nakladanje na ustrezni transport bo samodejno dodan na vaš račun. Hsdoyucmnepfx Adksni

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Frezalna odstranjevalka skorje z reduktorjem korenin: Proizvajalec: Stoiber GmbH Model: StoMill 3000 Letnik: 2026 Stanje: Novo Cena & Lokacija: Cena na zahtevo AT – 4122 Arnreit Opis: Za popolnoma avtomatsko odstranjevanje skorje in zmanjševanje korenin listavcev in iglavcev. Prednosti naprave: • Odstranjevanje skorje s frezalno glavo in redukcija korenin v eni napravi • Patentirana varnostna nožna os • Popolnoma avtomatsko delovanje • Upravljanje z radijskim daljincem • Nizka poraba energije Tehnični podatki: • Os za odstranjevanje skorje z 22 kW ali 30 kW pogonske moči • Reduktorska os z 15 kW – 45 kW pogonske moči • Za vse hlode dolžine od 2 metrov • Premer hloda: 20 – 120 cm Opcije: Hodpfx Adjrk Nk Eskjni • Škatla za sekance • Strgalo z verižnim transporterjem za odstranjevanje sekancev • Izmetalnik hlodov / lovilna kad za hlode