Notranji Sonda nakup rabljenega (10.282)

Leto izdelave: 1989, Stanje: dober (rabljeno), številka stroja/vozila: TH2000/9953, DEMAG KBK crane runway system with approx. 9x4m dimensions (4m bridge) Multiple units of this crane are available! Load capacity / lifting capacity: 500 kg (0.5 t) Technical data of the system: Crane runway made of Demag KBK2 rails The system is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers, etc. Including 500 kg steel chain hoist – lifting height approx. 3.5 m Nwodpfx Ajv Iakasg Tsc Crane is dismantled and immediately available Used condition, see photos Item location: 75053 Gondelsheim Shipping by freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are available in stock! Other KBK systems in stock as well. Load capacities 125 kg – 1600 kg Please inquire about your crane runway with desired load capacity and dimensions without obligation.

Leto izdelave: 1985, Stanje: zelo dobro (rabljeno), številka stroja/vozila: (20020324 EG) - VK-RES, DEMAG KBK Crane Ceiling & Crane Runway, approx. dimensions 16.5 x 7 m (7 m bridge – double-girder crane) Load capacity / lifting capacity: 500 kg – 0.5 t Technical details of the system: Crane runway made from Demag KBK2 profiles The system is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable drag chain, supports/hangers, etc. Incl. Demag PK2 500 kg electric chain hoist – lifting height approx. 4.5 m Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 profiles are in stock! Nwodpjty S I Eefx Ag Tjc Other KBK systems also available, with capacities from 125 kg up to 1600 kg. Please feel free to inquire for your required crane runway with load capacity and dimensions.

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), številka stroja/vozila: WD700/10, Technical Data: 1 Vetter / Demag Pillar Swivel Jib Crane SWL 500KG with Demag Chain Hoist Type AS5-4.0 Rated capacity at full outreach: 500 KG / 0.5 t Height: approx. 3.75 m Underside of jib: approx. 3.42 m Outreach: approx. 3.5 m Hook height: approx. 2.85 m Total weight: approx. 800 kg incl. anchor plate 1050 mm With Demag chain hoist 500 kg (older model) Slewing range 270°, connection 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Nedpsv Hv Edofx Ag Towc Additional cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping via freight forwarder or collection by appointment only

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, številka stroja/vozila: F32/16, ABUS EHB overhead travelling crane track with cantilever supports Approximate dimensions: 8.2 m x 4.8 m, load capacity / lifting capacity: 1x 250 kg (0.25 t) Technical data of the unit: Crane track made from ABUS HB180 rails Approximate dimensions as follows: External dimensions / required space: approx. 8.2 m x 4.8 m With 1 bridge, 250 kg capacity Top edge of supports: 4.05 m Top edge of runway rail: 3.88 m Bottom edge of runway rail: 3.70 m Top edge of bridge: 3.62 m Bottom edge of bridge: 3.46 m Hook height: 3.05 m Track gauge: 3.8 m Clear distance between supports: 4.46 m Nedpjmi S A Asfx Ag Tswc Runway rail length: 8.2 m Bridge length: 4.4 m Base plate of the support: 50 x 50 cm Support type: HEA180 Support spacing: 7.88 m All supports can be positioned flexibly. System delivered complete, including: ABUS HB rails, trolleys, end plates, cable festoon system, mounting brackets/hangers, chain hoist with pendant control, 4 supports, etc. The crane is dismantled and available immediately. Item location: 75053 Gondelsheim Very good condition, see photos. Shipping by freight forwarder or collection only by prior arrangement.

Stanje: rabljeno, Touch probe for coordinate measuring machine, probe head, stylus RENISHAW Probe Kit - TP20 System Included in delivery: 1x star stylus with M2 thread (5x M2 styli with ruby ball Ø 2mm; length 15mm; star Ø 38mm) 1x 6-way probe head = TP20 probe module (6-way) Nedotpkybjpfx Ag Tswc 1x 50mm extension, Probe Extension NVMS-50 (with 2x mounting keys) in original plastic storage box used, in good condition

Stanje: rabljeno, Probe head (CMM) rigid probe RENISHAW type PH5 + TP20 + PEL1-50 Probe for coordinate measuring machine Njdpfx Aornagpjg Tjwc Serial: 77501 - A Probe holder: TP20 probe body for interchangeable modules (probe modules) Extension - type PEL 1, length 50 mm Probe mounting: M8 thread Head mounting with MS shank Ø 9.5 mm - Status display with 2 LEDs - Cable connection via 5-pin DIN 180° socket - 5 thread connections M8 for probes (4 blind plugs included) Total weight: 280g Used, in good condition

Leto izdelave: 2014, Stanje: dober (rabljeno), številka stroja/vozila: 2014-1313, Offer 22651 Technical Data: - Mobile design with motorized forward and reverse travel, including steering - Motorized sanding stroke, forward and reverse, with adjustable speed Nwedpji Apb Nofx Ag Tjc - Longitudinal sanding stroke, forward and back - Motorized contact pressure – adjustable sanding pressure - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel: width 60 mm / diameter 300 mm - Pneumatic connection: 6 bar - Drive: 400 V / 2880 rpm / 7 kW - Space requirement approx.: W 5700 x H 1200 x D 1400 mm - Weight approx.: 800 kg

Stanje: rabljeno, TECHNICAL DATA - Grinding length: 120 mm - Centre height: 102 mm - Travel paths (X/Z): 450 x 200 mm Njdpeuhbmqsfx Ag Tjwc - Rapid traverse speeds (X/Z): 12 m/min SPINDLE SUPPORT - Number of spindles: 2 WORKPIECE SPINDLE HEADSTOCK - Max. speed of workpiece spindle headstock: 1500 rpm - Spindle bore: 28.6 mm - Power: 1.4 kW - Taper: A2.4/CM5 - Torque: 150 Nm - Manual B-axis angle: +/- 2° - C-axis: 0.0001° SUPPLY - Installed power: 34 kVA DIMENSIONS - Footprint: 3600 x 2800 mm - Weight: 2600 kg MACHINE HOURS - Power-on hours: 26,781 h ACCESSORIES - Fanuc Oi-TD control - Coolant supply through the spindle centre - Cooling unit for spindle cooling - Workpiece loading robot - 2 spindles available: 59,600 - 41,600 rpm - Dressing turbine

Stanje: novo, a complete range of DEMAG control switches for sale as a lot, mostly new Nsdpev T U Scofx Ag Tjwc

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, DEMAG hoist motor ZBR132 B12/2 B140 Nsdpfev Uhwzsx Ag Towc for hoist DR10 in very good condition Also, take a look at my other listings.

Stanje: dober (rabljeno), Made in Germany Smallest economically grindable bore: 6 mm Largest grindable bore: 50 mm Maximum grinding length: 80 mm Maximum clamping diameter: 235 mm Distance from workpiece spindle axis to table center: 145 mm Workpiece spindle speeds: 640 and 1000 rpm Swivel angle of the workpiece spindle casing to one side: 10 degrees Maximum table feed speed, hydraulically infinitely variable: 12 m/min Maximum distance between workpiece spindle flange and grinding support: 550 mm Power requirement: approx. 8 kW Net weight of the machine: 2,000 kg Nwjdpfx Agjda A Eio Toc

Stanje: zelo dobro (rabljeno), Innenmeßschraube Inside Micrometer Nwsdpfxown E Nys Ag Toc (28638) Messbereich: 50–1000 mm

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical Specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Nodpfxjlpadys Ag Tjwc Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Leto izdelave: 1980, Stanje: rabljeno, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 units weight: 4.8 t automatic tool feeder hydraulic clamping system for pull head and end-piece holder Nwodpfx Ascdtpljg Tjc automatic loading device for workpiece diameters up to 100 mm magnetic chip conveyor

Leto izdelave: 1960, Stanje: rabljeno, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Broaching positions: 2 stations The machine is equipped with a 2-position rotary indexing table. It features an automatic tool feeder and is designed for manual series production. Tool locking in both the pull bridge and the tool feeder is mechanical spring-actuated (draw head DIN 1417). Nedpjui Sbsfx Ag Tjwc

Leto izdelave: 1959, Stanje: rabljeno, max. pressing force: 16 t max. stroke: 1250 mm Nwjdps Rwa Uofx Ag Tsc cutting speed: 5.6 m/min return speed: 30 m/min

Leto izdelave: 1956, Stanje: rabljeno, številka stroja/vozila: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine number: 1413 General / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition. Tensile force: 13,000 kg (max.) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Pull head chuck diameter: Ø 85 mm Clear gap between cylinders: max. 390 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1150 x 1500 x 3725 mm (with tool feeder extended) Power supply / Connected load: 380 Volt 50 Hz / 7.5 kW Njdodbmgmopfx Ag Tjwc Accessories / Special Equipment: The machine’s traverse beam has 3 broaching tool holders; the workpiece table has 1 broaching station (modifiable). The tool clamping system and the tool feeder are designed for spring-actuated locking (DIN 1415). The machine is equipped with an automatic tool feeder; the existing tool feeder mount accommodates only 1 tool (central broaching station). An integrated coolant system for cutting oil is included. Remarks: The machine is in good condition considering its age and is immediately ready for operation. It is designed for manually operated production runs with medium batch sizes. The machine features an automatic cycle. For use, ideally a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools are available on request. The machine is available for viewing under power at our warehouse.

Leto izdelave: 1951, Stanje: dober (rabljeno), številka stroja/vozila: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-to-use condition Broaching stroke: 1500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: universal pull head for flat shanks up to 26 mm wide Clear bore in clamping table: Ø 105 mm Nodpfedcdrpsx Ag Towc Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: hydraulically, steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant-lubricant system • The machine is fitted with an oil and chip tray featuring a tool feeder carriage Remarks: The machine is ideal for manufacturing keyways and profiles. It runs smoothly, with clean guides and cylinder. Broaching needles and arbors can be supplied upon request. The machine is available for demonstration under power at our warehouse.

Leto izdelave: 1980, Stanje: dober (rabljeno), številka stroja/vozila: 03.2123, Manufacturer: Arthur Klink Nodpfxodffzfe Ag Tjwc Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition Pulling force: 25,000 kg Broaching length: 2000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping head holder diameter: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Equipment: The machine is currently supplied without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously mounted on the machine (workpiece sliding table is adaptable). The tool clamping system is equipped with hydraulic locking in both the pull bridge and the feed unit. The machine features a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production, and for optimal performance, installation on a dedicated foundation (pit) is ideally required. Pulling heads and ejectors are available on request. The machine can be viewed in our warehouse.

Leto izdelave: 1962, Stanje: rabljeno, številka stroja/vozila: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine no.: 1790 General / Technical Data: Hydraulic horizontal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal draw head for flat shanks Through-bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by the oil and chip tray) Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without work area) Power supply: 380 Volt / 50 Hz / 15A Hydraulic motor: 4 kW Accessories / Special equipment: • The machine is equipped with a universal draw head for flat shank tools Nwedpfx Asdl Uzkjg Toc • Coolant/lubrication system • No automatic tool loader included • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for producing keyways. Broaching needles and broaching arbors can be supplied on request. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1958, Stanje: rabljeno, številka stroja/vozila: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of Manufacture: 1958 Weight: 2,500 kg General Information / Technical Data: Nsdpfx Agjda Ugio Towc Used vertical hydraulic internal broaching machine with one broaching station, in operational condition Pulling force: 6,000 kg Broaching length: 1,000 mm Chuck diameter: Ø 85 mm Maximum gap between cylinders: 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / connected load: 380V, 50 Hz / 4 kW Accessories / Special Features: Machine is equipped with a workpiece table for one broaching station. The tool clamping system is designed for spring-actuated locking (DIN 1415). The machine has an integrated coolant system. A double pull-head for two flat broaching tools with workpiece support plate is included. Remarks: The machine is in a good condition considering its age and is ready for immediate use. It is designed for manual operation in medium batch production. For optimal use, a machine pit or alternatively a platform is recommended. Draw heads can be supplied on request. The machine does not include an automatic tool feeder. The machine can be inspected under power in our warehouse.

Leto izdelave: 1993, Stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: Nsdpocc D Ddefx Ag Tjwc The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8151, premer vrtljive mize: 800 mm, višina brušenja: 750 mm, teža obdelovanca (maks.): 800 kg, skupna višina: 4.100 mm, skupna širina: 26.650 mm, skupna dolžina: 44.000 mm, dolžina pomika po osi Y: 750 mm, dolžina podajanja os Z: 550 mm, skupna masa: 13.000 kg, premer brusilnega koluta: 400 mm, premer diska: 400 mm, hitrost vretena za brušenje: 1.460 obr/min, premer brušenja: 800 mm, širina krmilne omare: 650 mm, vrsta vhodnega toka: Enosmerni tok, višina krmilne omare: 1.900 mm, dolžina elektro omare: 1.800 mm, največja hitrost vretena: 1.800 obr/min, hitrost vretena (min.): 1.460 obr/min, obremenitev mize: 900 kg, premer obdelovanca (maks.): 850 mm, širina brusilnega kolesa: 60 mm, širina mize: 1.240 mm, moč: 35 kW (47,59 KM), hitro pomikanje X-os: 2 m/min, hitri pomik os Y: 100 m/min, hitri pomik na osi Z: 2 m/min, potrebna višina: 4.100 mm, zahteva za prostor dolžina: 5.100 mm, potrebna širina: 2.655 mm, Good day, For sale is a well-maintained and fully functional Sielemann cylindrical grinding machine suitable for surface grinding, internal grinding, and external grinding applications. The machine features a swiveling column with three different grinding heads, each designed for specific applications. Complete machine documentation is available and will be presented during inspection. The Sielemann offered here has been regularly serviced and maintained. The following components were recently replaced: Njdorntirepfx Ag Tswc - 3x New counterbalance cylinders - 1x New complete hydraulic power unit - New guideway covers - Rotary table group overhauled Technical Data: Machine length: 4,400 mm Machine width: 2,655 mm Machine height: 4,100 mm Machine weight: 13,000 kg Control cabinet width: 650 mm Control cabinet height: 1,900 mm Control cabinet length: 1,800 mm Grinding table diameter: 800 mm Grinding table load capacity: 800 kg Grinding table drive power: 0.21 - 14.5 kW Grinding table speed: 100 rpm (bidirectional) Grinding table workpiece clamping: Magnetic chuck incl. T-slots Z-axis travel (grinding table): 550 mm Maximum grinding height (Y): 750 mm Lubrication pump machine bed: 0.18 kW Lubrication pump machine column: 0.1 kW Leakage oil pump: 0.065 kW Hydraulic pump: 1.5 kW 1) External Cylindrical Grinding Head Spindle drive power: 11 kW Spindle speed: 1,450 rpm Grinding wheel: 400x50 mm Taper grinding spindle mount: D=65 mm Taper slope: 1:5 Feed rate (Y): 100 mm/min 2) Internal Cylindrical Grinding Head Spindle drive power: 5.5 kW Grinding wheel: variable Feed rate (Y): 100 mm/min 3) Surface/Flat Grinding Head Spindle drive power: 11 kW Spindle speed: 1,800 rpm Grinding wheel: 400x50 mm Taper grinding spindle mount: D=65 mm Taper slope: 1:5 Feed rate (Y): 100 mm/min Viewing appointments can be arranged at short notice by prior agreement! Best regards, R. Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte-Stukenbrock Görlitzerstraße 9

Leto izdelave: 1972, Stanje: rabljeno, Max. pulling force: 10 t Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 25 m/min Broaching stations: 3 units Passage width: 470 mm Nwsdpfx Aocdtnhsg Tjc Distance between broaching stations: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via permanent magnet chip conveyor 1 hydraulic system, 1 work platform, electric-hydraulic shank and end-piece holder confirmation, automatic loading device

Stanje: dober (rabljeno), Leto izdelave: 2012, DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Rail System (2x3m) The Manulift DCM-Pro was developed for safe and fast load handling with one-handed operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. The control unit is rigidly connected to the load handling attachment, enabling the operator to handle both the hoist and the load with just one hand. Manufacturer: DEMAG Type: Crane Chain Hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Njdpfx Aohwd E Neg Tewc Control: GSA Type 4 Travel range: lateral 3 meters and longitudinal 2 meters Steel girder: included in the offer Condition: used Complete factory closure, large selection of mezzanines, pallet racks, shelving racks, vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. Further items – new and used – can be found in our shop! International shipping costs on request!