Notranji Reflektorji nakup rabljenega (9.792)

Leto izdelave: 2013, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: TH2000Messraum, DEMAG KBK overhead crane rail 9.3 x 5.3 m (bridge travel distance approx. 5 m) The crane is also available in various other dimensions, several units in stock with raised traveling gear. Load capacity / lifting capacity: 500 kg Technical data of the system: - Crane track made of Demag KBK2 rails - With raised wheel blocks – crane girder is positioned between the two running rails for maximum hook path - With integrated power supply system!! System is delivered complete: KBK rails, rail connectors, travel units, end plates, cable drag chain, brackets/suspension devices, etc. Incl. Demag DK chain hoist 500 kg (older model) Crane is dismantled and immediately available Various cranes available Very good condition, see pictures Item location: 75053 Gondelsheim Shipment via freight carrier or self-collection by appointment only Demag KBK1, KBK2, and KBK3 rails are kept in stock! Other KBK systems also available. Load capacities from 125 kg to 1600 kg. Gedjv Iai Nspfx Afqstt Please inquire about your crane track with required capacity and dimensions without obligation.

Stanje: dober (rabljeno), JUNG D22 / Notranja okrogla brusilni stroj -Stroj primeren za notranje in čelno brušenje -Najmanjša brusna izvrtina 14 mm -Največja brusna izvrtina 150 mm -Brusna dolžina brez čelne brusilne enote 250 mm -Brusna dolžina s čelno brusilno enoto -6x obratov obdelovanca 46-270 obr/min Gedpfx Ajw Sv Dhefqjtt -Vreteno možno zavrteti levo/desno 30 stopinj -Razdalja med osjo vretena in središčem mize 250 mm -Največja razdalja med obdelovalnim vretenom/brusilnim suportom 935 mm -Vreteno / naklon vsak po 30 stopinj -Delovna miza / naklon naprej/nazaj po 5 stopinj -Ročno / avtomatsko delovanje -Konična brusilna enota -Luneta -Tročeljustna vpenjalna glava -Rezervna brusilna vretena Dimenzije: D׊×V 2,8×1,5×1,8 metra / Teža 3500 kg Pridržujemo si pravico do napak in sprememb.

Stanje: dober (rabljeno), Made in Germany Gjdpfoda A Eisx Afqett Smallest economically grindable bore: 6 mm Largest grindable bore: 50 mm Maximum grinding length: 80 mm Maximum clamping diameter: 235 mm Distance from workpiece spindle axis to table center: 145 mm Workpiece spindle speeds: 640 and 1000 rpm Swivel angle of the workpiece spindle casing to one side: 10 degrees Maximum table feed speed, hydraulically infinitely variable: 12 m/min Maximum distance between workpiece spindle flange and grinding support: 550 mm Power requirement: approx. 8 kW Net weight of the machine: 2,000 kg

Stanje: rabljeno, TECHNICAL DATA - Grinding length: 120 mm - Centre height: 102 mm - Travel paths (X/Z): 450 x 200 mm - Rapid traverse speeds (X/Z): 12 m/min SPINDLE SUPPORT - Number of spindles: 2 WORKPIECE SPINDLE HEADSTOCK - Max. speed of workpiece spindle headstock: 1500 rpm - Spindle bore: 28.6 mm Gedpeuhbmqjfx Afqott - Power: 1.4 kW - Taper: A2.4/CM5 - Torque: 150 Nm - Manual B-axis angle: +/- 2° - C-axis: 0.0001° SUPPLY - Installed power: 34 kVA DIMENSIONS - Footprint: 3600 x 2800 mm - Weight: 2600 kg MACHINE HOURS - Power-on hours: 26,781 h ACCESSORIES - Fanuc Oi-TD control - Coolant supply through the spindle centre - Cooling unit for spindle cooling - Workpiece loading robot - 2 spindles available: 59,600 - 41,600 rpm - Dressing turbine

Leto izdelave: 1993, Stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Gtsdpfxjcc D Dds Afqst Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, DEMAG hoist motor ZBR132 B12/2 B140 for hoist DR10 in very good condition Also, take a look at my other listings. Gtjdpfxjv Uhwzs Afqst

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), številka stroja/vozila: WD700/10, Technical Data: 1 Vetter / Demag Pillar Swivel Jib Crane SWL 500KG with Demag Chain Hoist Type AS5-4.0 Rated capacity at full outreach: 500 KG / 0.5 t Height: approx. 3.75 m Underside of jib: approx. 3.42 m Outreach: approx. 3.5 m Hook height: approx. 2.85 m Total weight: approx. 800 kg incl. anchor plate 1050 mm With Demag chain hoist 500 kg (older model) Slewing range 270°, connection 400V 16A Crane is dismantled and immediately available Gtjdpfxev Hv Edo Afqot Item location: 75053 Gondelsheim Additional cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping via freight forwarder or collection by appointment only

Leto izdelave: 1969, Stanje: pripravljen za uporabo (rabljen), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, with documentation, on-site inspection possible. Gtedpfeqzkdmsx Afqot

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8151, premer vrtljive mize: 800 mm, višina brušenja: 750 mm, teža obdelovanca (maks.): 800 kg, skupna višina: 4.100 mm, skupna širina: 26.650 mm, skupna dolžina: 44.000 mm, dolžina pomika po osi Y: 750 mm, dolžina podajanja os Z: 550 mm, skupna masa: 13.000 kg, premer brusilnega koluta: 400 mm, premer diska: 400 mm, hitrost vretena za brušenje: 1.460 obr/min, premer brušenja: 800 mm, širina krmilne omare: 650 mm, vrsta vhodnega toka: Enosmerni tok, višina krmilne omare: 1.900 mm, dolžina elektro omare: 1.800 mm, največja hitrost vretena: 1.800 obr/min, hitrost vretena (min.): 1.460 obr/min, obremenitev mize: 900 kg, premer obdelovanca (maks.): 850 mm, širina brusilnega kolesa: 60 mm, širina mize: 1.240 mm, moč: 35 kW (47,59 KM), hitro pomikanje X-os: 2 m/min, hitri pomik os Y: 100 m/min, hitri pomik na osi Z: 2 m/min, potrebna višina: 4.100 mm, zahteva za prostor dolžina: 5.100 mm, potrebna širina: 2.655 mm, Good day, For sale is a well-maintained and fully functional Sielemann cylindrical grinding machine suitable for surface grinding, internal grinding, and external grinding applications. The machine features a swiveling column with three different grinding heads, each designed for specific applications. Complete machine documentation is available and will be presented during inspection. The Sielemann offered here has been regularly serviced and maintained. The following components were recently replaced: - 3x New counterbalance cylinders - 1x New complete hydraulic power unit - New guideway covers - Rotary table group overhauled Technical Data: Machine length: 4,400 mm Machine width: 2,655 mm Machine height: 4,100 mm Machine weight: 13,000 kg Control cabinet width: 650 mm Control cabinet height: 1,900 mm Control cabinet length: 1,800 mm Grinding table diameter: 800 mm Grinding table load capacity: 800 kg Grinding table drive power: 0.21 - 14.5 kW Grinding table speed: 100 rpm (bidirectional) Grinding table workpiece clamping: Magnetic chuck incl. T-slots Z-axis travel (grinding table): 550 mm Maximum grinding height (Y): 750 mm Lubrication pump machine bed: 0.18 kW Lubrication pump machine column: 0.1 kW Leakage oil pump: 0.065 kW Hydraulic pump: 1.5 kW Gtsdpfx Aferntireqot 1) External Cylindrical Grinding Head Spindle drive power: 11 kW Spindle speed: 1,450 rpm Grinding wheel: 400x50 mm Taper grinding spindle mount: D=65 mm Taper slope: 1:5 Feed rate (Y): 100 mm/min 2) Internal Cylindrical Grinding Head Spindle drive power: 5.5 kW Grinding wheel: variable Feed rate (Y): 100 mm/min 3) Surface/Flat Grinding Head Spindle drive power: 11 kW Spindle speed: 1,800 rpm Grinding wheel: 400x50 mm Taper grinding spindle mount: D=65 mm Taper slope: 1:5 Feed rate (Y): 100 mm/min Viewing appointments can be arranged at short notice by prior agreement! Best regards, R. Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte-Stukenbrock Görlitzerstraße 9

Leto izdelave: 2002, Stanje: generalkompletno obnovljen (rabljeno), On behalf of a customer and for their account, I am offering a VOUMARD 150 CNC L 1300 The machine is equipped with: - 4-position turret: 3 x internal, 1 slot free for external use - Pneumatically swiveling dresser Gjdpfx Asgigv Dofqott - Maximum diameter: 350 mm - Maximum length: 1,300 mm - CNC Fanuc 32i control - Extensive accessories, including several hydraulic steady rests, power chucks, etc. For a full overview, see "Documents." The machine can be inspected under power at the owner's facility. The machine underwent a complete overhaul in 2016. Additionally, I offer 2 Voumard VMX 90 A grinding spindles—one new, one completely overhauled—which can also be purchased separately.

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Gsdpfx Aolpadyefqstt Technical Specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Stanje: novo, a complete range of DEMAG control switches for sale as a lot, mostly new Gsdpfx Afev T U Sceqstt

Stanje: rabljeno, Area lighting, floodlight, workshop lamp, luminaire, high bay light, hall lighting, pendant light, industrial lamp - Power rating: 150 watts Gedpfx Aed N Ddpsfqett - Quantity: 13 units available - Price: per unit - Dimensions: 390 x 320 x H310 mm - Weight: 7.1 kg per unit

Leto izdelave: 1988, Stanje: pripravljen za uporabo (rabljen), Rated power: 9.5 kVA, equipped with automation, regularly serviced, inspection possible. Gtsdpfx Aenk Uxvjfqot

Leto izdelave: 1955, Stanje: rabljeno, številka stroja/vozila: 1331, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1955 Weight: approx. 2,950 kg Gsdpfxjdbr H Te Afqstt Machine No.: 1331 General / Technical data: Hydraulic horizontal broaching machine in good, ready-to-use condition Broaching length: 1,500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shafts up to 26 mm width Through bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (restricted by oil and chip tray) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shafts • The machine features a movable coolant and cutting fluid system for 2 media • The machine comes with an oil and chip tray and a tool feed carriage Remarks: The machine is ideal for producing keyways and profiles. The machine runs smoothly and is very clean in the guideway and cylinder areas. Broaching tools and arbors can be supplied upon request. The machine is available for viewing and demonstration, powered up in our warehouse.

Stanje: rabljeno, Ball valve with internal thread - Internal thread: 2 (likely refers to size, e.g., 2 inches; clarify if needed) - Design: Full bore, solid ball - Quantity: 10 units available - Price: Per piece - Weight: 0.2 kg Gtedeb A Sa Sjpfx Afqot

Leto izdelave: 1958, Stanje: rabljeno, številka stroja/vozila: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of Manufacture: 1958 Weight: 2,500 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with one broaching station, in operational condition Pulling force: 6,000 kg Broaching length: 1,000 mm Chuck diameter: Ø 85 mm Maximum gap between cylinders: 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Gtjdeda Ugijpfx Afqjt Power supply / connected load: 380V, 50 Hz / 4 kW Accessories / Special Features: Machine is equipped with a workpiece table for one broaching station. The tool clamping system is designed for spring-actuated locking (DIN 1415). The machine has an integrated coolant system. A double pull-head for two flat broaching tools with workpiece support plate is included. Remarks: The machine is in a good condition considering its age and is ready for immediate use. It is designed for manual operation in medium batch production. For optimal use, a machine pit or alternatively a platform is recommended. Draw heads can be supplied on request. The machine does not include an automatic tool feeder. The machine can be inspected under power in our warehouse.

Leto izdelave: 1962, Stanje: rabljeno, številka stroja/vozila: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine no.: 1790 General / Technical Data: Hydraulic horizontal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal draw head for flat shanks Through-bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by the oil and chip tray) Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without work area) Gtsdpfx Aedl Uzkjfqjt Power supply: 380 Volt / 50 Hz / 15A Hydraulic motor: 4 kW Accessories / Special equipment: • The machine is equipped with a universal draw head for flat shank tools • Coolant/lubrication system • No automatic tool loader included • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for producing keyways. Broaching needles and broaching arbors can be supplied on request. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1980, Stanje: dober (rabljeno), številka stroja/vozila: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition Pulling force: 25,000 kg Broaching length: 2000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping head holder diameter: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 22 kW Gtodpfsdffzfsx Afqjt Accessories / Special Equipment: The machine is currently supplied without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously mounted on the machine (workpiece sliding table is adaptable). The tool clamping system is equipped with hydraulic locking in both the pull bridge and the feed unit. The machine features a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production, and for optimal performance, installation on a dedicated foundation (pit) is ideally required. Pulling heads and ejectors are available on request. The machine can be viewed in our warehouse.

Leto izdelave: 1951, Stanje: dober (rabljeno), številka stroja/vozila: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-to-use condition Broaching stroke: 1500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: universal pull head for flat shanks up to 26 mm wide Clear bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: hydraulically, steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant-lubricant system • The machine is fitted with an oil and chip tray featuring a tool feeder carriage Gedpfx Afodcdrpeqjtt Remarks: The machine is ideal for manufacturing keyways and profiles. It runs smoothly, with clean guides and cylinder. Broaching needles and arbors can be supplied upon request. The machine is available for demonstration under power at our warehouse.

Leto izdelave: 1956, Stanje: rabljeno, številka stroja/vozila: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine number: 1413 General / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition. Tensile force: 13,000 kg (max.) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Pull head chuck diameter: Ø 85 mm Clear gap between cylinders: max. 390 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1150 x 1500 x 3725 mm (with tool feeder extended) Gtsdodbmgmspfx Afqjt Power supply / Connected load: 380 Volt 50 Hz / 7.5 kW Accessories / Special Equipment: The machine’s traverse beam has 3 broaching tool holders; the workpiece table has 1 broaching station (modifiable). The tool clamping system and the tool feeder are designed for spring-actuated locking (DIN 1415). The machine is equipped with an automatic tool feeder; the existing tool feeder mount accommodates only 1 tool (central broaching station). An integrated coolant system for cutting oil is included. Remarks: The machine is in good condition considering its age and is immediately ready for operation. It is designed for manually operated production runs with medium batch sizes. The machine features an automatic cycle. For use, ideally a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools are available on request. The machine is available for viewing under power at our warehouse.

Leto izdelave: 1959, Stanje: rabljeno, max. pressing force: 16 t max. stroke: 1250 mm cutting speed: 5.6 m/min Gtodpfx Afe Rwa Usqst return speed: 30 m/min

Leto izdelave: 1960, Stanje: rabljeno, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Gtodpfx Afeui Sbjqet Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Broaching positions: 2 stations The machine is equipped with a 2-position rotary indexing table. It features an automatic tool feeder and is designed for manual series production. Tool locking in both the pull bridge and the tool feeder is mechanical spring-actuated (draw head DIN 1417).

Leto izdelave: 1980, Stanje: rabljeno, max. pulling force: 10 t max. stroke: 1250 mm Gedpfecdtplox Afqett max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 units weight: 4.8 t automatic tool feeder hydraulic clamping system for pull head and end-piece holder automatic loading device for workpiece diameters up to 100 mm magnetic chip conveyor

Leto izdelave: 1972, Stanje: rabljeno, Max. pulling force: 10 t Max. stroke: 1250 mm Gtedpfscdtnhox Afqot Max. cutting speed: 10 m/min Max. return speed: 25 m/min Broaching stations: 3 units Passage width: 470 mm Distance between broaching stations: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via permanent magnet chip conveyor 1 hydraulic system, 1 work platform, electric-hydraulic shank and end-piece holder confirmation, automatic loading device