Nef 280 nakup rabljenega (2.780)

Stanje: rabljeno, prevoženi kilometri: 29.800 km, moč: 115 kW (156,36 KM), vrsta goriva: bencin, vrsta prenosa: mehanski, prva registracija: 07/1981, naslednji pregled (TÜV): 09/2027, barva: rdeča, število sedežev: 2, Oprema: pogon na vsa štiri kolesa, Original early second-hand fire department G-Class, which has never been used for civil purposes to date. TÜV and historic registration certificate (according to §23 StVZO) passed in September 2025. General inspection (HU) valid until 09/2027 ("no defects found" undertaken by DEKRA). Year of manufacture: 1981 / First registration: 07-1981. Original mileage is only 29,800 km. Used solely by the fire brigade up to now. Advance Rescue Vehicle (VRW) with ZIEGLER bodywork and Knurz-Kirsch generator with 5 kVA output. German garage vehicle, continuously registered with the original registration document (only 2 previous owners) until autumn 2025. The original documents still list the manufacturer as GFG "Geländefahrzeug-Gesellschaft," which was a joint venture between Daimler-Benz and Steyr-Daimler-Puch in Austria at the time. This is one of the last vehicles to bear this manufacturer’s name in the papers; shortly after, "Daimler-Benz" became the officially listed manufacturer in the registration documents. In 1991, a complete MATTER roll bar was installed in the vehicle (duly documented in the registration papers). Comes with a small roof rack system for transporting long equipment. The long-wheelbase 280 GE is the largest and most powerful model from the first G-Class production series that could be ordered ex-factory as a Mercedes G-Class during the early years. The straight-six petrol engine M110 with 2717 cc and 115 kW/156 hp starts and runs well. 4-speed manual gearbox with differential locks. Power steering. 155 km/h registered as top speed. A power take-off for operating the generator is also present. The vehicle was last used mainly to transport a portable fire pump (TS) with suction hoses and accessories. Therefore, there are no rear seats, providing a load area similar to that of a truck. No additional seats beyond the two front seats remain. According to original papers, it is classified as a “3-seater” and the registration type is “Other vehicle: fire brigade advance rescue vehicle (VRW).” Empty weight: 2360 kg. Iajdpfjxthdzex Abxsu Gross vehicle weight (originally 2900 kg) was upgraded in 1991 to 3030 kg as per documentation. This gives the 280 GE a current payload capacity of 670 kg. Vehicle dimensions: Length 4395 mm / Width 1700 mm / Height 2150 mm. Tyres 205/80R16 in good condition. Currently fitted with winter tyres bearing the snowflake symbol as required by current legislation (DOT 2018). Although the G does not have a towbar, the necessary main traverse is installed. It is not possible to state the retrofitting/towing capacity since the corresponding fields in the original registration document are marked as “not applicable.” According to the last owner (verbal report), the Mercedes is accident-free; however, there is no written proof, so this is passed on strictly as an oral history to the buyer. The 280 GE was recently driven a long distance on the motorway to us, which it completed without any issues. A new battery has just been installed. This off-road vehicle is immediately available here and ready for new assignments. This offer applies only to businesses, professionals, public authorities, emergency services, agriculture and forestry sectors, and similar self-employed persons. Sale to private end consumers is unfortunately not possible. Subject to prior sale and errors in description.

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 24.276 h, Gildemeister Lathe NEF 600 Year of manufacture: 2007 Control: Heidenhain Plus Max. turning diameter: 600 mm Distance between centers: 1,250 mm Swing diameter over bed: 600 mm Cross travel: 320 mm Main spindle: Speed range – main spindle: max. 3,000 rpm Spindle bore: 90 mm Chuck diameter: 320 mm Tool turret: Number of tool positions: 8 stations Total connected load: 42 kVA Machine weight: approx. 5.0 t Space requirements: approx. 3.6 x 2.14 x 1.95 m Iedpfx Ajykbk Rsbxjau Accessories: coolant gun, Schunk chuck 315 mm, tailstock MK 5

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €9,420 Leasing rate: €181.81 Saw frame: Swivelling frame Saw blade dimensions: 2450 x 27 x 0.9 mm Blade speed: 35/70 m/min Isdpsynm R Dofx Abxeau Cutting capacity at 0° (round): 220 mm Cutting capacity at 0° (square): 200 mm Cutting capacity at 0° (flat): 250 x 150 mm Cutting capacity at 45° (round): 160 mm, (square): 140 mm Cutting capacity at 60° (round): 90 mm, (square): 90 mm Working height: 800 mm Motor: 0.7 kW Length: 1330 mm Width: 1300 mm Height: 1880 mm Weight: 350 kg Hydraulic vice Lowering and raising of the saw frame by means of hydraulic cylinder Fast lowering Automatic rapid lowering and raising controlled by sensor pin Adjustable cutting pressure according to material cross-section and quality Double safety pressure buttons for cycle start 2 speeds Coolant system CUTTING CYCLE: Vice closes; rapid hydraulic lowering of the saw frame; blade rotation and coolant pump start; lowering at working speed; end of cut; blade rotation and coolant pump stop; rapid raising of the saw frame; stop raising the saw frame; vice opens OPTIONS: Adjustable clamping pressure of the vice (R1): EUR 403,-- Roller conveyors and saw blades available on request

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2,050 mm Max. bending capacity – mild steel: 20 mm Max. sheet thickness without prebending at D=5x upper roll: 20 mm Max. sheet thickness without prebending at D=1.5x upper roll: 16 mm Max. sheet thickness with prebending at D=5x upper roll: 16 mm Max. sheet thickness with prebending at D=1.5x upper roll: 12 mm Upper roll diameter: 280 mm Lower roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Iajdpfsynmyljx Abxou Length: 4,350 mm Width: 1,700 mm Height: 1,850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive for upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS (PRICES ON REQUEST): Steplessly variable rolling speed Hydraulic side support Hydraulic top support NC control system IMPORTANT NOTES ON CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: rabljeno, Leto izdelave: 2001, Drehdurchmesser . mm Drehlänge . mm Steuerung . Typ . CCUO Drehdurchmesser über Support . mm Planweg . mm Spindeldurchlass . mm Drehzahl . U/min Getriebestufen . Pinolenhub . mm Eilgang . m/min Hauptantriebsmotor . kW Dreibackenfutter Durchmesser . mm Gesamtleistungsbedarf . kW Maschinengewicht ca. . t Raumbedarf ca. . m Iaedsyqwb Ejpfx Abxju Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 303.000 km, prva registracija: 11/2016, vrsta goriva: dizel, lastna masa: 5.000 kg, največja dovoljena obremenitev: 13.000 kg, skupna masa: 18.000 kg, velikost pnevmatike: 315/70 R 22,5, stanje pnevmatik: 90 odstotek, konfiguracija osi: 4x2, medosna razdalja: 5.700 mm, razmak osovin: 5.700 mm, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 3, skupna dolžina: 10.000 mm, skupna širina: 2.550 mm, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 11.500 kg, Leto izdelave: 2016, Oprema: ABS, AdBlue, Tahograf, centralno zaklepanje, električno upravljanje oken, hladilna enota, klimatska naprava, nadzor oprijema, računalnik na krovu, retarder, spojler, tempomat, zapora diferenciala, VOLVO FE 280 šasija s kabino, karoserija in mehanika v odličnem stanju. Iasdpoyxwxbofx Abxeu

Stanje: rabljeno, prevoženi kilometri: 364.000 km, moč: 210 kW (285,52 KM), prva registracija: 09/2022, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 5.260 mm, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, skupna dolžina: 9.550 mm, skupna širina: 2.600 mm, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.400 mm, Leto izdelave: 2022, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, nadzor oprijema, tempomat, Tehnične informacije Število valjev: 6 Prostornina motorja: 7.698 ccm Prednja os: vzmetenje: listnate vzmeti Zadnja os: vzmetenje: zračno vzmetenje Teže Lastna masa: 10.050 kg Nosilnost: 10.450 kg Skupna dovoljena masa: 20.500 kg Funkcionalno Nakladalna ploščad: BAR, 2000 kg Znamka nadgradnje: Carrier Supra Identifikacija Registrska številka: 93-BTR-1 = Dodatne možnosti in oprema = - Prikaz zunanje temperature - Kamerinski sistem Isdpfey Sxbksx Abxeau - Zračno vzmetenje - Radio - Kamera za vzvratno vožnjo - Stranska vrata - Diferencial z zaporo = Opombe = 2 kosa na zalogi Servisirano pri pooblaščenem trgovcu Volvo

Stanje: dober (rabljeno), prevoženi kilometri: 356.163 km, moč: 210 kW (285,52 KM), prva registracija: 05/2017, vrsta goriva: dizel, velikost pnevmatike: 315/80 R22,5, konfiguracija osi: 4x2, gorivo: dizel, zavore: zaviranje z motorjem, barva: rdeča, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 11.500 kg, dolžina tovornega prostora: 7.670 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.470 mm, Leto izdelave: 2017, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, navigacijski sistem, spojler, tempomat, zapora diferenciala, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Roof spoiler - Remote-controlled central locking - Speed limiter - Air suspension - Air horn - Radio/CD player - Spare wheel - Reversing camera - Side door - Sun visor flap - Toolbox = Notes = Fully closing loading flap Reversing camera Fully air-suspended Air conditioning Cruise control Navigation system Roll stops Dhollandia DHLV tail lift 3,000 kg Stainless steel apron L300 x W66 x H80 Internal dimensions of the box: L767 x W247 x H247 Lashing rail heights: 70 cm – 120 cm – 180 cm = Further Information = General Information Model year: 2026 Iasdpfx Aow Nxytobxeu Registration number: 94-BJN-8 Technical Information Number of cylinders: 6 Engine displacement: 7,698 cc Axle Configuration Tire size: 315/80 R22.5 Axle brand: Anders Brakes: disc brakes Suspension: air suspension Front axle: max. axle load: 8,000 kg; steerable; tire tread left: 65%; tire tread right: 65% Rear axle: twin tires; differential lock; max. axle load: 11,500 kg; left tire tread inner: 60%; left tire tread outer: 60%; right tire tread inner: 60%; right tire tread outer: 60% Weights Unladen weight: 10,129 kg Payload: 9,371 kg Gross vehicle weight: 19,500 kg Functional Tail lift: Dhollandia DHLV, tailgate, 3,000 kg Maintenance, History, and Condition APK (Dutch MOT): inspected until 08.2026 Technical condition: good Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Stanje: rabljeno, Leto izdelave: 1995, Premer reza: 280 mm Dolžina žaginega traku: 4200 mm Širina reza: 280 x 280 mm Dimenzije žaginega traku: 4200 x 34 x 1,1 mm Hitrost reza: 18 - 115 m/min Iedpfx Absp Rai Eexsau Večkratni pomik: 0 - 6000 mm Pogonska moč: 3,0 kW Napetost obratovanja: 400 V Skupna potrebna moč: 5,0 kW Teža stroja cca: 2,3 t Potrebni prostor cca: 2,35 x 2,40 x 2,00 m - Tovarniška št.: 6082 - Krmiljenje: SIEMENS COROS - OP 15 - Transporter za ostružke - Večkratni pomik - Vpenjanje snopov - Hladilna naprava - Sistem minimalnega mazanja

Stanje: pripravljen za uporabo (rabljen), - RABLJEN - MOSTNI REZKALNI STROJ S PREMIKAJOČO MIZO IN PREMIKAJOČIM PREČNIM NOSILCEM PODOLŽNI HOD: 9000 mm PREČNI HOD: 2950 mm VERTIKALNI HOD: 1250+2200 mm HITRO POMIK L-T-V: 3 - 3 - 2 m/min VELIKOST MIZE: 2800 x 8000 (5000+3000) mm NAJVEČJA DOVOLJENA OBREMENITEV: 64000 kg Iodjyru Ncspfx Abxsau VRETENO: 20 - 600 min⁻¹; 100 kW; 13000 Nm; ISO 60 RAZDALJA MED STEBRI: 3200 mm RAZDALJA VRETENO/MIZA: 2806 mm SKUPNE DIMENZIJE: 21000 x 7800 x 6650 mm DODATNA OPREMA: MENJALNIK OPOMBA: 1x 90° GLAVA; 1x REDUCIRANA 90° GLAVA; 1x VERTIKALNI PODALJŠEK; 1x NAGIBNA GLAVA; 3-STOPENJSKI MENJALNIK

Stanje: rabljeno, prevoženi kilometri: 356.582 km, moč: 162 kW (220,26 KM), prva registracija: 08/2016, vrsta goriva: dizel, velikost pnevmatike: 285/70R19,5, konfiguracija osi: 4x2, medosna razdalja: 4.750 mm, gorivo: dizel, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2016, Oprema: dvižna zadnja plošča, električno upravljanje oken, klimatska naprava, Prednja os: Dimenzija pnevmatik: 285/70R19,5; Vzmetenje: listnate vzmeti Zadnja os: Dimenzija pnevmatik: 285/70R10,5; Dvojna montaža; Vzmetenje: zračno vzmetenje Pogon: na kolesa Lastna teža: 8.218 kg Nosilnost: 7.782 kg Isdpfx Aboy Tuqqexoau Dovoljena skupna masa (zGG): 16.000 kg Nakladalna ploščad: D HOLLANDIA, podvozna dvižna vrata

Leto izdelave: 2002, stanje: rabljeno, Ponujamo ta rabljeni MAPLAN MTF 1500/280 tip, letnik 2002. Tip stroja: MTF 1500/280 Serijska številka: 1120157 Leto izdelave: 2002 Priključna moč: 66 kW Tip Krmilnika: B&R - CP260 Tip panela: Maplan PC 4000 - DOS Iasdpfx Aoyf E Naebxeu Leto izdelave: 2002 Stanje: pripravljen za uporabo (rabljen) Obratovalne ure: 86,018h Opis: Zapiralna sila: 2800kN Volumen brizga: 1500ccm Razdalja med vodili prečno: 600mm Razdalja med vodili vzdolžno: 220mm Velikost grelne plošče (š/d): 630 /500mm Razdalja med ploščami odprtega stroja: 500mm Priključna moč: 66kW Napajanje: 3x 400V/ 50Hz Dimenzija stroja (DxŠxV): cca 3,30x3,30x3,20 m Teža stroja: cca 7000kg Vrsta vhodnega toka: standardni industrijska trofazna električna napeljava Oprema: dokumentacija Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 642.989 km, moč: 206 kW (280,08 KM), prva registracija: 11/2008, vrsta goriva: dizel, lastna masa: 8.590 kg, največja dovoljena obremenitev: 7.410 kg, skupna masa: 16.000 kg, velikost pnevmatike: 285/70R19.5, konfiguracija osi: 2 osi, medosna razdalja: 4.700 mm, razmak osovin: 4.700 mm, naslednji pregled (TÜV): 03/2027, gorivo: dizel, zavore: retarder, barva: zelen, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, število sedežev: 2, skupna dolžina: 8.600 mm, skupna širina: 2.600 mm, skupna višina: 3.200 mm, prostornina tovornega prostora: 31 m³, dolžina tovornega prostora: 6.450 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.980 mm, Leto izdelave: 2008, Oprema: ABS, AdBlue, Tahograf, airbag, centralno zaklepanje, dodatne luči, dvižna zadnja plošča, filter saj, greljenje sedeža, klimatska naprava, kompresor, meglenke, parkirni grelec, popolna servisna zgodovina, računalnik na krovu, registracija tovornjaka, retarder, servovolan, tempomat, zapora diferenciala, Model: VOLVO FL-280 4x2 16 Tons EURO 5 Portal Doors Tail Lift: ZEPRO Z 200-136 MA Capacity: 2,000 kg First Registration: 25.11.2008 Mileage: 642,989 km Engine Power: 206 kW Displacement: cm³ Auxiliary Heater Antennae Radio/Cassette/CD/MP3 Air Conditioning Air-suspended, fully adjustable seats with seat heating Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Work lights Fog lights High beam Hazard lights Storage box Aluminium fuel tank Iajdpfxsy Rz Dxj Abxsu Emissions class: EURO 5 AdBlue Retarder/Intarder/Engine brake Axle configuration: 4x2 Differential lock Wheelbase axle 1 and 2: 4,700 mm Tyre size axle 1 (front): 285/70R19.5 Tyre size axle 2 (rear): 285/70R19.5 Leaf/Air suspension Wheel covers Unladen weight: 8,590 kg Payload: 7,410 kg Gross vehicle weight: 16,000 kg Overall vehicle dimensions (L x H x W): 860 cm x 320 cm x 260 cm Body dimensions (external or internal) (L x H x W): 645 cm x 198 cm x 245 cm Cargo volume: 31 m³ Our vehicles are always listed with valid technical inspection and emissions certificates (TÜV/AU). Usually, these are foreign test certificates that are sufficient for export license plates. For a German-standard TÜV and AU inspection, please consult with us individually. Feel free to reach us via WhatsApp, Telegram, Viber, or Signal for more information and pictures. Please call us directly or send a WhatsApp message! Deutsch (German): Wir sprechen Deutsch und Englisch, aber Sie können uns gerne in Ihrer Sprache eine Nachricht schicken! English: We speak German and English, but feel free to send us a message in your language! Español: Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Português: Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! Français: Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italiano: Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Русский: Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! العربية: نحن نتحدث الألمانية والإنجليزية، لكن لا تتردد في إرسال رسالة إلينا بلغتك! دری: ما به آلمانی و انگلیسی صحبت می‌کنیم، اما می‌توانید پیام خود را به زبان خود برای ما ارسال کنید! Trade-in possible! Net price! We can deliver your vehicle directly to the port of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium or Amsterdam. We can arrange worldwide shipping for you! Export license plates available on request! We assist you with export, original data confirmation for country homologation, supplier’s declaration, preparation of export documentation, and customs plates if required. Viewing and test drives are possible at any time, even at weekends, by prior phone arrangement! Disclaimer: The buyer is obliged to independently verify the condition, dimensions, and equipment of the goods/vehicles. All information is without guarantee. Subject to change, prior sale, and errors.

Stanje: zelo dobro (rabljeno), CNC stružnica ROSILIO TBI 280 Numerično krmiljenje: FAGOR 8055TC-A Leto: 2006 Napajanje: 400 V Vgrajena moč: 15 kVA Teža: 2200 kg Iasdpfsy S Axyex Abxou Stroj v splošno dobrem stanju.

Stanje: dober (rabljeno), Leto izdelave: 1996, GALLUS Arsoma EM 280-8 Farben Flexodruckmaschine Modell: EM280 Ijdpoy A Nhiofx Abxoau Baujahr: 1996 Ausstattung: • 8 Flexodruckwerke • Heißlufttrockner (8x) • GEW UV-Trocknungssystem (1x) • Wendestange (Bahnwendevorrichtung) • Bogenauslage • Bahnbeobachtungssystem BST Powerscope 4000 Technische Daten (ca.): • Maximale Bahnbreite: 280 mm • Druckbreite: ca. 260–270 mm • Wiederholbereich: ca. 250–520 mm • Abwickler: max. Rollendurchmesser ca. 800–1000 mm • Aufwickler: max. Rollendurchmesser ca. 800–1000 mm • Mechanische Geschwindigkeit: bis ca. 120 m/min • Materialbereich: Selbstklebeetiketten, Papier, Folien und flexible Verpackungsmaterialien Die Maschine bietet dank der Kombination von konventioneller Heißlufttrocknung und UV-Härtung eine solide und bewährte Lösung für die Etikettenproduktion mit hoher Flexibilität. Dies ermöglicht die Verarbeitung verschiedenster Materialien und Anwendungen. Ein wesentlicher Vorteil dieser Maschine ist das enthaltene Werkzeugpaket, das Zusatzinvestitionen deutlich reduziert und einen sofortigen Produktionsstart ermöglicht. Im Lieferumfang enthalten sind: • Druckzylinder • Rasterwalzen • Magnetzylinder Dieser Mehrwert gewährleistet eine hohe Vielseitigkeit und Kosteneffizienz für zukünftige Produktionsanforderungen.

Stanje: rabljeno, GILDEMEISTER NEF 320 je CNC stružnica za natančno obdelavo, visoko natančnost in zanesljivost. Podatki o obdelavi: največji premer struženja 320 mm, največja dolžina struženja 740 mm, višina konic 160 mm, razdalja med konicami 750 mm, izvrtina vretena 52 mm; pomiki Z 700 mm, X 185 mm. Tehnični podatki: moč vretena 11 kW, največji navor 410 Nm, brezstopenjske vrtljaje 4–4000 min⁻¹, vretenasti konus MK 6; konjiček Morse 5, hod pinole 120 mm, premer 70 mm; hitri pomik X 8 m/min, Z 10 m/min; masa ~2000 kg, mere 2450×1668×1825 mm. Dosega ozke tolerance; značilna za avtomobilsko industrijo, fino mehaniko/urarsko industrijo, orodjarstvo, letalstvo in medicinsko tehniko. Ijdpeyxnugjfx Abxoau

Stanje: rabljeno, Rabljeni stroj Oprema in tehnični podatki: Iajdpfoyq T Nfsx Abxju - z jeklenimi krožnimi lopaticami - neposreden pogon - nazivna velikost 280 mm - motor 5,5 kW - volumski pretok 5750 m³/h - dimenzije ohišja 755 x 660 x 759 mm - z elektro omaro Dostopnost: hitro dobavljivo Skladišče: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2003, Stružnica DMG tip NEF 320 K Stanje: Rabljeno Leto izdelave: 2003 Krmiljenje: SINUMERIK 810DE-L CCUO Cikli za konusno struženje in obdelavo navojev Tehnični podatki Premer nad ležiščem: 320 mm Premer nad prečnim suportom: 150 mm Vpenjalna glava: 200 mm Prečni hod: 150 mm Pogon podajanja AC: 4 m/min Vreteno: Velikost 6 Premer izvrtine vretena: 52 mm Vpenjanje vretena: MK 6 Vreteno v prednjem ležaju: 85 mm Pogonska moč: 7 kW Maks. navor: 320 Nm Iajdpfx Absyrggmjxou Območje vrtljajev: 14 - 3550 min-1 Stopenj prenosa: 2 Nosilec orodja: Multifix velikost B Pinola: 70 mm Hod pinole: 120 mm Vpenjanje pinole: MK5 Mere Dolžina / Širina: 2600 mm / 1440 mm Teža: cca 1440 kg

Stanje: rabljeno, prevoženi kilometri: 641.000 km, moč: 206 kW (280,08 KM), prva registracija: 06/2014, vrsta goriva: dizel, konfiguracija osi: 4x2, gorivo: dizel, barva: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2014, Oprema: ABS, električno nastavljivo ogledalo, električno upravljanje oken, = Dodatne možnosti in oprema = - Radio - Diferencialna zapora = Opombe = Volvo FL280, 2014, 641.000 km Euro 6, Skupna masa: 17.500 kg, D'Hollandia zadnje dvižno dvigalo = Dodatne informacije = Sprednja os: Krmiljena Zadnja os: Dvojna montaža Iedsy Ryd Rspfx Abxjau Skupna dovoljena masa: 17.500 kg = Podatki o podjetju = Bančni podatki: Račun pri Rabobanku: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT koda: RABONL2U - Pred transakcijo vedno preverite naše bančne podatke! - Rezervacija vozil ni možna brez pologa. - Pridržujemo si pravico do napak v tipkanju in besedilu za vsa ponujena vozila.

Stanje: rabljeno, Leto izdelave: 1996, Premer reza 280 mm Rezno območje pri 90 stopinjah: ploščato 280 x 160 mm Rezno območje pri 90 stopinjah: kvadratno 240 x 240 mm Dolžina žaginega lista 425 x 40 mm Rezno območje pri 45 stopinjah: okroglo 180 mm Rezno območje pri 45 stopinjah: ploščato 150 x 250 mm Rezno območje pri 45 stopinjah: kvadratno 170 x 170 mm Skupna potrebna moč 1,8 kW Teža stroja cca 450 kg Potrebni prostor cca 1,4 x 0,8 x 1,0 m Proizvodni obločni žagalni stroj z: Iaodpsy N D H Tsfx Abxou - univerzalno hidravliko - hladilnim sistemom Malo uporabljeno, kot novo.

Stanje: rabljeno, Leto izdelave: 1999, Swing diameter 500 mm Turning length 1500 mm Control system Manual Plus Spindle bore diameter 70 mm Speed range 8 - 2800 rpm Number of gearbox stages 3 Max. swing diameter over cross slide 290 mm Spindle nose DIN 55027 Size 8 Toolholder type C Tailstock quill stroke 180 mm Machine weight approx. 3.2 t Iajdpfeub Amljx Abxsu Dimensions (L x W x H) 3.0 x 1.8 x 1.8 m Machine description: This machine is suitable for turning chuck and shaft workpieces. Standard grades of steel, cast iron, copper, aluminium, brass, gunmetal, and machinable plastics can be machined on this lathe. --> N.E.F. plus concept The machine is supplied as standard with the following equipment: - Cycle control - AC main drive - Compound slide with AC drive and control panel - Tailstock with manual clamping and centering sleeve - Coolant supply - Manual chip guards - Chuck guard - Quick-change toolpost Hahn & Kolb Multifix C - Reduction bush for the spindle Accessories as per images: - 2 steady rests - Various chuck jaws - Hahn & Kolb Multifix type C - Assorted turning tool holders Technical data: Working area: - Swing over bed: 500 mm - Swing over cross slide: 285 mm - Chuck Ø 250 (315) mm - Cross slide: 260 mm - Distance between centers: 1000/1500 mm Spindle: - Spindle nose DIN 55027: size 8 - Spindle bore diameter: 70 mm - Spindle nose hollow taper: 80 metric - Spindle diameter at front bearing:

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.200 mm, skupna širina: 2.500 mm, skupna dolžina: 2.800 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 4.500 kg, vhodna napetost: 380 V, nazivna moč: 38 kW (51,67 KM), We offer this used NOMOCO VSRS-280 CNC 4 centerless cylindrical grinding machine, year of manufacture 1993. Manufacturer: NOMOCO Model: VSRS-280 CNC 4 Year of manufacture: 1993 Condition: used Category ID: 1497 Type ID: 541 Machine type: Centerless cylindrical grinding machine The machine is currently still in ongoing production and can be inspected at any time by prior appointment. The overall condition is rated as very well-maintained, provided regular maintenance. Technical data Control: Siemens Axis configuration: X-axis: Plunge saddle Y-axis: Dressing quill S Z-axis: Dressing traverse S C-axis: Support U-axis: Support R W-axis: Dressing traverse R CNC-controlled axes: X / Y / Z / C Machine dimensions and weight Overall height: approx. 2,200 mm Overall width: approx. 2,500 mm Overall length: approx. 2,800 mm Overall weight: approx. 4,500 kg Ijdoyr Sh Aopfx Abxsau Electrical connection data: Operating voltage: 380 VAC / 50 Hz Rated current: 100 A Connected load: 38 kW If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 3550 x 1450 x 1800 mm Weight: 3500 kg Total Power Requirement: 94.75 kW Twin-shaft saw MULTIMAX DUO-280 XL - Maximum cutting height: 280 mm - Minimum cutting height: 150 mm (100 mm) - Maximum working width: 300 mm - Minimum workpiece length: 800 mm - Feed speed: 3–15 m/min - Saw shaft diameter: 60 mm - Speed: 3,000 rpm - Maximum saw blade diameter: 405 mm - Minimum saw blade diameter: 305 mm - Upper saw shaft motor: 45 kW - Lower saw shaft motor: 45 kW - Feed motor: 4.0 kW - Height adjustment motor: 0.75 kW - Total power: 94.75 kW - Voltage: 400 V / 50 Hz - Feed rollers: Ø 140 x 50 mm - Anti-kickback device - Automatic lubrication system - Automatic star-delta switch - Extraction ports: 4 x 140 mm - Working height: 860 mm Iaodpfx Asvz Hxqobxju - Dimensions: L = 3550, W = 1450, H = 1800 mm - Weight: 3500 kg

Stanje: novo, številka stroja/vozila: 1acf251a278ec5cde4067a7b1, lastna masa: 5.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis: Semi-trailer, fleet use Fine-grain steel welded construction, fifth wheel plate with interchangeable 2'' kingpin Outer frame with slightly sloped design, new version with load-lock profile for attaching tension straps 24 t two-speed landing gear, single-side operation, straight base, without compensating slide Free support foot dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection: aluminium Rear underrun protection: steel Quarter shell mudguards in front of and behind each axle 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 plastic toolbox, with shelf, width=620/height=360/depth=440 mm, lockable with a padlock (padlock not included) Iajdpfx Abskv Uvzexeu Axles & suspension Drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Braking system Two-line compressed air braking system, colour-coded line routing for easy service Spring-loaded parking brake Duomatic connection at the front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise/lower valve Vehicle stability control system Wheels and tyres 235/75 R17.5, make as per manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin socket at the front, without connecting cable Flooring Anti-slip phenolic plywood, approx. 30 mm thick, for high point loading, suitable for forklift axle loads up to max. 5,600 kg Front wall / corner stanchions 25 mm aluminium hollow section, approx. 1,350 mm high, steel corner stanchions in volume version Country of registration / Plates Germany with Dekra inspection and expert report (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paintwork Frame hot-dip galvanized incl. passivation, 15-year warranty against rust-through Front wall aluminium Attention! Archive photos shown!

Stanje: rabljeno, Dimenzije za tovornjake (palete): Od 1 do 4) 140x110 višina 120 cm, teža 600 kg 5) 140x130 višina 40 cm, teža 100 kg 6) 150x100 višina 90 cm, teža 300 kg 7) 320x100 višina 120 cm, teža 800 kg Iodpfxex Tuu No Abxjau 8) 320x90 višina 80 cm, teža 300 kg Inventar delov: št. 69 kosov po 3 metre (skupaj 207 metrov) št. 1 kos 2,80 metra št. 13 kosov po 3 metre (skupaj 39 metrov) št. 6 kosov po 1,80 metra (skupaj 10,8 metrov) št. 2 kosa po 2,40 metra (skupaj 4,8 metrov) št. 1 kos 1,50 metra št. 2 kosa po 0,70 metra (skupaj 1,4 metra) št. 2 kosa po 1 meter (skupaj 2 metra) št. 1 kos 1,50 metra št. 17 zavojev po 1,20 tekočih metrov (skupaj 20,4 tekočih metrov) s korakom (premer) 1,15 metra št. 6 zavojev po 0,3 metra (skupaj 1,8 metra) št. 1 pogon z vodilom 1,50 metra