Mk4 nakup rabljenega (260)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 850 mm, izvrtina vretena: 103 mm, največja hitrost vretena: 3.000 obr/min, premer struženja nad ležiščem sani: 600 mm, model krmilnika: Sinumerik 840 D, TECHNICKÉ PODROBNOSTI Dolžina struženja: 850 mm Premer nad ležiščem: 600 mm Premer struženja z zunanjimi orodji: 290 mm Območje vrtljajev: 30 – 3.000 vrt/min Glava glavnega vretena: velikost A8 po DIN 55026 Premer vretena v prednjem ležaju: 150 mm Vrtina vretena: 103 mm Konjiček (NC-krmiljen) Prisilna sila: prosto programabilna 3.000 – 8.000 N Vpenjanje: MK4 Ijdpfjxt Rkqsx Ah Ajtr Orodni revolver za gnana orodja Vpenjalne glave za cilindrična stebla: 12 kosov po DIN 69880-40x63 Pozicije za gnane nosilce orodij: 12, možno radialno opremljanje Moč: 5 kW pri 100% ED Navor: maks. 20 Nm Območje vrtljajev: 20 – 4.000 vrt/min C-os Območje vrtljajev: 0 – 800 vrt/min Maks. vnosni kot: 9.999,999° Vnosna enota: 0,001 Lunetni voziček Vodilno območje premera: 8 – 101 mm PODROBNOSTI STROJA Krmiljenje: Sinumerik 840 D OPREMA 2 zgornja nosilca orodja 3-čeljustna močnostna vpenjalna glava SMW 225 Transportni trak za odrezke s hladilno enoto Odsesavanje oljne meglice Nalaganje/razkladna loputa za zgornje nakladanje

Stanje: rabljeno, Leto izdelave: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speeds: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev cross: 0.025 - 0.376 mm/rev Spindle bore diameter: Ø 42 mm Tailstock taper (ISO): MK4 Tailstock quill stroke: 180 mm Total connected load: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. (LxWxH): 2.4 x 1.0 x 1.7 m The lathe does not feature rapid traverse. Positioning via 2 axes Display via Pinacho Lathe Controller Itodpsvav Sdsfx Ah Aer Multifix quick-change tool post with turning tool Coolant system Foot switch Thread cutting possible (metric, Whitworth, module, pitch)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, Karstens K11 1000 This cylindrical grinding machine is in absolutely like-new condition and will be available from December 2025. It has extremely low operating hours. Included is accessories worth over 20,000.00 euros. Since we specialize in Karstens cylindrical grinding machines, we can offer you complete service (both electrical and mechanical) for the machine after purchase. Technical data: Centre distance: 1000 mm Centre height: 180 mm Workpiece weight: 70 kg (between centers, unsupported), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, infinitely variable speed 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill stroke 45 mm Tailstock tray next to Z-axis table Quill force: 200-600 N Table swivel: 12.5 degrees Bfo0atkpzs Cross feed travel spindle: 80 mm Rapid traverse travel: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: Net 3500 kg Feed drive via DC motor Air-cushion supported rapid adjustment of grinding spindle head for quick and safe positioning Separate drives for external and internal grinding spindles Fully automatic operating cycle, infeed movement via cam switch: Rapid advance, rapid retraction, grinding mode, infeed stop, mym infeed Automatic longitudinal grinding cycle Central coolant supply for all grinding stations Workpiece headstock with infinitely variable drive for rotating and lockable spindle Itedsh Rit Espfx Ah Asr Infeed control for plunge and traverse grinding, settings for retraction, infeed amounts, feed rates, spark-out times, idle strokes Digital readout for X-axis from Heidenhain Paper band filter system can be optionally offered Comparable to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Stanje: zelo dobro (rabljeno), Stebrni vrtalni stroj znamke WMW, tip BK32AI, letnik cca. 1970. Tip upravljanja: klasičen. Tehnični podatki: Vrtalna zmogljivost v jeklu (premer): 32 mm (litoželezo Ø 50 mm); izhod: 315 mm; hod vrtanja: 200 mm; pritrdišče MK: MK4; število vrtljajev vretena: 30...1000 / 9 stopenj vrt./min; brezstopenjski pomik: 0,8 - 1,25 / fin hod 0,25 - 0,4 mm/obrat; prilagoditev glave vretena: 280 mm; rezanje navojev: max. M 24; razdalja vreteno / miza: max. 710 mm; vpenjalna površina mize D x Š: 450 x 560 mm; razdalja vreteno / osnovna plošča: max. 1180 mm; vpenjalna površina osnovne plošče: 660 x 660 mm; skupna potreba po moči: 3,2 kW; teža stroja cca: 1,0 t; dimenzije stroja cca D x Š x V: 1,1 x 0,7 x 2,6 m. Tehnično brezhiben, možen ogled kadarkoli. Nakladanje in transport nista problem. Isdsxyh Rzopfx Ah Aetr

Stanje: rabljeno, Premer struženja 250 mm Dolžina struženja 610 mm Krmiljenje ARIX CNC Premer izvrtine vretena 54 mm Ijdpexuv Uksfx Ah Aetr Konjiček MK4 Hitrost vrtenja 20 - 6000 vrt/min Teža stroja ca. 3,5 t Po naši oceni je naprava v dobrem rabljenem stanju in jo je možno po predhodnem dogovoru ogledati v delovanju. Priključna oprema, prikazana orodja in vpenjalna sredstva so vključeni v obseg dobave samo, če je to navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih in informacijah ter vmesna prodaja so pridržane!

Stanje: rabljeno, Radialbohrmaschine SCHLUMBERGER Typ RF6 Manuelle Höhenverstellung Kegel: MK4 Spindeldrehzahl: 35 – 1800 U/min Tischgröße: 1000 x 650 mm Säulenschlittenweg entlang dem Bett: 750 mm Maximaler Abstand Spindelnase/Tisch: 700 mm (in oberster Position) Minimaler Abstand Spindelnase/Tisch: 250 mm (in unterster Position) Manuelles Heben/Senken von Tisch und Säule Automatischer Vorschub Ijdpfxsxu Icmo Ah Aotr 360°-Drehung um die Säule Hydraulische Säulenarretierung Bohren / Gewindeschneiden Schmiermittelpumpe Spannung: 380 V Breite: 1400 mm Tiefe: 900 mm Höhe in niedrigster Position: 2650 mm Höhe in höchster Position: 3000 mm Gewicht: ca. 3 t

Stanje: novo, Leto izdelave: 2025, Metal Lathe TYTAN 750 PRO (VARIO) 400V (without base) with variable spindle speed. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking, and reaming holes. Typically used in small industrial workshops, repair shops, garages, etc. This machine version is supplied without a base. The universal TYTAN 750 PRO lathe, thanks to its infinitely variable spindle speed adjustment, is an ergonomic machine that meets user demands. Reduced setup time when processing parts of different sizes translates into improved efficiency and ease of operation. VARIO version – electronic, stepless spindle speed adjustment via DC motor and voltage regulator. This ensures optimal rotational accuracy of the lathe chuck, resulting in high-quality machining of workpieces. Key advantages: - Modern DC motor with infinitely variable spindle speed ensures convenience and reduces calibration times. - LCD screen with spindle speed display allows control and quick adjustment of spindle speed during setting of cutting and threading modes. - Two spindle speed ranges: low (50-1125 rpm) for machining hard steels, and high (100-2250 rpm) for high-speed precision turning. - Thread cutting: metric – 18 pitches (0.2-3.5 mm); imperial – 21 pitches (8-56 TPI). Left- and right-handed thread cutting available. - Automatic longitudinal feed with 6 speed settings (0.07 to 0.40 mm/rev) – significantly reduces processing time without compromising machining quality, especially for long parts. - Fully compliant with EU (CE) directives as well as Polish and DIN standards. Technical specifications: - 3-jaw chuck: 125 mm - Max turning diameter over bed: 250 mm - Turning diameter over cross slide: 150 mm - Turning length between centers: 750 mm Iedpfxjvvlxle Ah Ajtr - Max workpiece length (chuck/center): 700 mm - Bed width: 135 mm - Spindle bore: 27 mm - Spindle taper: MT4 - Tool post dimensions: 65 x 65 x 20 mm - Max tool size: 12 x 12 mm - Compound rest travel: 70 mm - Cross slide travel: 135 mm - Longitudinal travel: 650 mm - Spindle speed regulation: stepless (L/H) - Spindle speeds: L: 50–1125 rpm / H: 100–2250 rpm - Number and range of metric threads: (18) 0.2–3.5 mm/rev - Number and range of imperial threads: (21) 8–56 TPI - Number and range of longitudinal feeds: (6) 0.07–0.4 mm/rev - Tailstock quill diameter: 30 mm - Tailstock quill travel: 60 mm - Tailstock quill taper: MT2 - Motor power S1/S6: 1.1/1.32 kW - Dimensions L/W/H (without base): 1310 x 610 x 480 mm - Weight (without base): 165 kg

Stanje: rabljeno, Leto izdelave: 2000, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm Control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter in front bearing: Ø 80 mm Iodpfxou Ixwio Ah Aetr Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill: ISO MK4 Tailstock quill travel: 500 mm stroke Main spindle power: 7.5 kW (100% duty: 11 kW) Electrical specification – voltage/frequency: 3/PE ~400V and 50/60Hz Total power consumption: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe features a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), max. speed 7,500 rpm Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders installed in the magazine, of which 4 pieces with collet chuck Coolant system, coolant supply via the tool turret Control cabinet with Rittal cooling unit type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool In standard condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Težki stružni stroj, stružnica, stružna klop, stružnica z vodilno in vlečno vreteno -Proizvajalec: Knuth, stružnica z vodilno in vlečno vreteno tip PICATOR 215/1250 -Strojna postelja: kaljena -Dolžina struženja: 1260 mm -Premer struženja nad posteljo: 470 mm -Premer struženja brez mostu postelje: 600 mm -Premer struženja nad suportom: 280 mm -Vrtina vretena: Ø 55 mm -Hitrost vretena: 36 - 2000 min⁻¹ -Tokarska glava: Forkardt Ø 200 mm -Konica konjička: MK4 Itjdpfjwv Uvfjx Ah Ajr -Pogonska moč: 3,6 kW -Pribor: 1x luneta, Multifix nosilec orodja, orodja kot na slikah -Mere: 1020/2210/V1190 mm -Teža: 1200 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Itjdpsthd Shsfx Ah Aer Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: nepreverjeno, številka stroja/vozila: 5012221, premer struženja nad prečnim suportom: 240 mm, izvrtina vretena: 58 mm, premer struženja: 430 mm, stružna dolžina: 760 mm, skupna dolžina: 1.890 mm, skupna širina: 900 mm, skupna višina: 1.800 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, skupna masa: 1.700 kg, - Swing diameter over gap: 690 mm - Bed width: 300 mm - Spindle bore: 58 mm - Longitudinal feeds: 0.05 - 0.82 mm/rev - Cross feeds: 0.02 - 0.4 mm/rev - Threads (metric): 0.5 - 7 mm - Leadscrew diameter: 35 mm - Leadscrew pitch: 6 mm - Tailstock quill diameter: 58 mm - Tailstock quill travel: 150 mm - Quill taper: MT4 Ijdpfx Ajv Iriush Aotr

Stanje: rabljeno, Radialbohrmaschine OTTO MULLER Isdoxu Iarepfx Ah Ajtr Spindel: MK4 Spindeldrehzahl: von 70 bis 1.400 U/min Vorderer Tischausleger: 1350 x 550 mm Hinterer Tischausleger: 1000 x 400 mm Schlittenweg: 1.000 mm Max. Abstand Spindelnase/Vordertisch: 600 mm Motor: 2 Geschwindigkeiten Max. Säulenhub: 400 mm Automatischer Vorschub Bohren/Gewindeschneiden-Funktion Spindeldrehzahl über Riemenscheibenverstellung Hydraulische Klemmung Schmierpumpe Spannung: 380 V Abmessungen in niedrigster Position: B 1.500 x T 2.400 x H 2.300 mm Gewicht: ca. 2 t

Stanje: nepreverjeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Well-maintained radial drilling machine Drilling capacity in steel: 40.0 mm Arm reach: 1300 mm Tool holder: MT4 Max. swivel angle: +/- 180 degrees Quill stroke: 280 mm Min. distance column to drill spindle (X): 593 mm Max. distance column to drill spindle (X): 1473 mm Spindle speed: 52 - 2000 rpm (12 steps) Feed: 0.05-0.1-0.2-0.3 mm/rev (4 steps) Column diameter: 250 mm Spindle diameter: 68 mm Clamping surface: approx. 1445 x 810 mm Operating voltage: 400 V Iedpoirngaofx Ah Aotr Total power requirement: 5.5 kW Machine weight: approx. 2815 kg Space requirements (L x W x H): 2010 x 820 x 2495 mm Features: - Electric height adjustment - Hydraulic clamping of the drilling carriage and column - Cube clamping table with T-slots - Automatic spindle feed - Forward/reverse spindle operation - Electric height adjustment for the boom - Manual speed adjustment - Manual feed adjustment - Handwheel for the movement of the drill carriage We are happy to demonstrate the machine under power at our premises. All information is provided without guarantee. Subject to prior sale. The item is sold to the exclusion of any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of obligations by the seller, as well as for any injury to life, limb, or health.

Stanje: rabljeno, Leto izdelave: 1970, Technical details: x-travel: 1000 mm y-travel: 320 mm z-travel: 350 mm Spindle mount ISO: MK4 / SK50 Spindle head swivels left and right: 90° Isdpfx Aou Ndgfoh Ajtr Distance from rear edge of table to column guide: min. 45 / max. 365 mm Outreach: 270 mm Distance spindle center to table: min. 50 / max. 400 mm Speed range: 31.5 - 1,600 / 18 steps rpm Feed rate: 25 - 1,120 mm/min horizontal and 8.3 - 416 mm/min vertical Rapid traverse speed: 3,000 mm/min horizontal / 1,000 mm/min vertical Clamping surface: 1,340 x 320 mm Machine weight approx.: 3,000 kg Machine dimensions approx. (LxWxH): 2.2 x 2.8 x 1.7 m Coolant system 2x counter bearing arbor mounts Ø 18 / Ø 60 mm and additional accessories in the tool cabinet. i.D.

Stanje: novo, Drilling capacity cast iron / steel ----- 35 / 30 mm Tapping capacity cast iron / steel ----- 22 / 20 mm Motor ----- 1.5 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle taper ----- MT4 Cross table ----- 600 x 190 mm Itsdpfx Ahoq E N Uxe Ajr Base ----- 650 x 450 mm T-slot diameter ----- 12 mm Maximum distance spindle - table ----- 610 mm Maximum distance spindle - base ----- 1180 mm Weight ----- 390 kg INCLUDES * LED work lamp * Coolant system * Digital depth stop * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Toolbox with various tools

Stanje: rabljeno, Description: General: Year of manufacture: 2020 Control system: WEISS CNC Distance between centers: 6 mm Center height: 200 mm Grinding wheel dimensions: 400 x 60 mm + 0 x 60 mm Workpiece spindle head: Rotational speed: 1 rpm Max. workpiece weight: 25 kg Max. grinding diameter: 390 mm Mount: MK4 Grinding spindle head: Peripheral speed: 2 m/s Grinding wheel dimension right: 0 x 60 mm Grinding wheel dimension left: 400 x 60 mm X-axis: 380 mm Z-axis: 1.1 mm B-axis: Torque motor, stepless Tailstock: Quill diameter: mm Quill stroke: 45 mm Mount: MK 4 Micrometer adjustment: +/- 0.04 mm Ijdpfxev Armce Ah Astr Equipment / Accessories: Position measuring systems: Direct (glass scales) Grinding spindles: 2x grinding spindle (left/right) GAP / Crash Control: Structure-borne noise (Sensotronic) Balancing: MPM balancing device Workpiece measurement: Marposs PF ME Automation: Robot interface prepared Setup mode: Electronic handwheel Emulsion mist separator: Mechanical Dresser: For external grinding wheel left/right Accessories: Various grinding wheels + flanges

Stanje: potreben popravila (rabljeno), Leto izdelave: 2017, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 179057653, Caracteristici tehnice: Zonă de lucru # Diametru universal: 600 mm # Diametru/înălțime maximă piesă de prelucrat: 450 / 400 mm # Distanță față de nasul arborelui principal la origine pinolă: 639 mm # Cursă X1/X2 (cursă de lucru): 335/289 mm / Viteză rapidă pe X: 30 m/min # Cursă Z1/Z2: 560/494 mm / Viteză rapidă pe Z: 30 m/min # Carenaj complet cu ușă automată – încărcare manuală sau automată opțională Arbore principal # Arbore principal conform DIN 55026: Mărime A6 # Turație maximă: 4500 rpm # Putere la ciclu de funcționare 100 / 40%: 23 / 18 kW # Cuplu la ciclu de funcționare 100 / 40%: 146 / 115 Nm Isdpfexxinfjx Ah Aetr Pinolă contrapunctor # Interfață: MK4 # Forță de strângere: 850 daN # Cursă de strângere: 200 mm Turelă X1/Z1: Suport scule cu scule acționate # Suporturi cu coadă cilindrică conform DIN 69880: 8 - VDI40 # Lungime maximă sculă: 130 mm # Număr poziții: 1 x 8 # Turație maximă: 4500 rpm # Cuplu maxim la ciclul de lucru 10%: 27 Nm, 100%: 14 Nm Turelă X2/Z2: Suport scule cu scule acționate # Unitate X-HOT pentru prelucrare forme poligonale, excentricitate max. (cursă): 8 mm # Sistem de prindere suport scule X-HOT: HSK 32S Echipament electric # Tensiune de operare: 400 V, 100 A # Putere instalată: 37 kVA Dimensiuni # Dimensiuni totale: Lungime=3000 mm (6477 mm cu evacuator de șpan), Lățime=3000 mm, Înălțime=3650 mm # Greutate: 11000 kg Principale caracteristici și capabilități: # Construcție verticală: Evacuare optimă a șpanului, încărcare/descărcare manuală sau automată. # CNC: Siemens 840D pentru NC1 și NC2 # Precizie înaltă: Precizie de poziționare pe axele X,Z ±0,002 mm cu rigle liniare Heidenhain # Arbore principal: Putere ridicată și interval larg de turații # Scule acționate: Permite operații de frezare și găurire suplimentare # Monitorizare durată de viață scule # Transportor de șpan răcire: Knoll # Unitate de filtrare lichid de răcire max 40bar: Knoll FKA/1400 # Sistem de detecție prezență piesă: cu senzor presiune joasă aer # INFRASTRUCTURĂ AUTOMATIZARE PENTRU INSTALARE ROBOT # Zonă de lucru complet închisă, iluminare în zona de lucru # Documentație: Disponibilă pe suport electronic și tipărit Stare utilaj: Defect # Lipsă valvă pentru circuitul de emulsie și senzori inductivi

Stanje: rabljeno, Lochkreismaschine WMW BKoE 450 x 800 Verfahrweg X: 560 mm Verfahrweg Y: 400 mm Verfahrweg Z: 470 mm Itsdpexuf Utofx Ah Aer Spindel: Ø 90 mm Aufnahme: MK4 Spindelausladung: 150 mm Spindeldrehzahl: 50 – 1600 U/min Tischgröße: 450 x 800 mm Maximale Tischbelastung: 400 kg 3-Achsen-Wegmesssystem HEIDENHAIN Automatischer Vorschub (Absenkung) Spannung: 380 V Breite mit Tischenden: 2900 mm / ohne Tischenden: 1500 mm Tiefe: 2500 mm Gesamthöhe: 2600 mm Gewicht: 4,5 t

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Proizvajalec: TSCHUDIN Tip stroja: SL 105U Letnik izdelave: 2024 Delovni vretenjak: MK6 Itodpfx Ahsd Adfuj Aer Kontra konjiček: MK4 Višina konic: 175 mm Razdalja med konicami: 1000 mm Dolžina brušenja: 1000 mm Krmiljenje: Siemens 840D SL Prostorske potrebe stroja: 4920x3400x2300

Stanje: rabljeno, Leto izdelave: 1976, Technical details: Drilling capacity in steel (diameter): 32 mm Throat depth: approx. 400 / 50 mm Horizontal travel of drilling head: 400 mm Drilling head vertically adjustable: 400 mm Quill stroke: 150 mm Spindle taper: MK4 (Morse taper 4) Grinding spindle speed: 100 - 2000 rpm Throat distance (spindle): min./max.: approx. 400 / 50 mm Vertical arm adjustment: 850 mm Horizontal arm adjustment: 400 mm Arm length: 1360 mm Arm pivot (horizontal): swiveling, mm/min Drill spindle speeds: 100...2 steps rpm Feed rates: 0.1 / 0.2 / - step mm/rev Table size: 00 x 510 mm Distance from table to bottom edge of spindle: min./max.: 350 / 800 mm Total power requirement: 2.4 kW Machine weight approx.: 1.8 t Isdowi Iqvjpfx Ah Ajtr Machine dimensions approx. LxWxH: 1.3 x 1.3 x 2.25 m Equipment: 2x base rails Provision for mounting a vertical table Accessories: Various clamping devices

Stanje: novo, Drilling capacity cast iron / steel ----- 35 / 30 mm Tapping capacity cast iron / steel ----- 22 / 20 mm Motor ----- 1.5 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle taper ----- MT4 Drill table ----- 540 x 470 mm Base ----- 650 x 450 mm T-slot diameter ----- 12 mm Maximum distance spindle - table ----- 610 mm Itodpfoq E N U Hox Ah Aor Maximum distance spindle - base ----- 1180 mm Weight ----- 320 kg INCLUDES * LED work light * Cooling system * Digital depth stop * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Toolbox with various tools

Stanje: dober (rabljeno), – MK4 – Automatic feed – 56/2240 rpm – Right and left rotation – 200 mm throat depth – Lighting – 400V Itodpfx Ahjwmzqkj Aor

Stanje: rabljeno, Leto izdelave: 1970, Technical details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 1000 mm Centre height measured in bed: 250 mm Centre distance: 1000 mm Spindle speeds: 18...1800 / 21 step rpm Spindle bore: 56 mm Tailstock quill stroke: 180 mm Longitudinal feeds: 0.08 - 3.26 mm/rev Cross feeds: 0.04 - 1.63 mm/rev Rapid traverse X-axis: 4.2 m/min Total power requirement: 7.5 kW Machine weight approx.: 2.9 t Machine dimensions approx. LxWxH: 2.6 x 1.1 x 1.3 m 4-jaw chuck Ø 250 mm with internal jaws Live centre in tailstock 4-way quick-change tool post Coolant system Accessories: Itjdovvrpkjpfx Ah Ajr various reduction sleeves MK3-MK5-MK4 Live centre Driving dog 3-jaw chuck Ø 250 mm with internal jaws The machine does not comply with UVV regulations!

Stanje: novo, Centre distance ----- 500 mm Centre height ----- 125 mm Swing over bed ----- 250 mm Swing over cross slide ----- 150 mm Spindle taper ----- MT4 Spindle bore ----- 26 mm Bed width ----- 140 mm Spindle speed ----- 80-1600 rpm Tailstock taper ----- MT3 Motor ----- 750W Itjdpfopz Iy Asx Ah Ajr Lathe equipped with automatic longitudinal and cross feed Including: cabinet base, 3-jaw chuck, 4-jaw chuck, faceplate, fixed steady rest, travelling steady rest, CE guard

Stanje: rabljeno, Technical Details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table speed: 0.05–4.5 m/min, stepless Spindle speed: grinding spindle 1780, 2050 rpm Spindle speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2200x280 mm Table swivel range: 9° forwards / 10° backwards Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDER without internal grinding attachment Isdpou Ng Dgefx Ah Aetr - For precision grinding of external (and internal) as well as tapered surfaces. - Infeed of grinding spindle headstock by hand or hydraulically - Table feed hydraulically infinitely variable - Grinding spindle swivels by 60° - Workpiece headstock swivels by 90°, with MK 4 mounting - Tailstock, MK 3 mounting Equipment: - Wheel dressing device - Coolant tank including pump and supply as per description.