Merilni Stolpec nakup rabljenega (1.984)

Stanje: zelo dobro (rabljeno), Zeiss coordinate measuring machine Type: O-INSPECT 442 Machine designation: Coordinate measuring machine Machine type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or tactile measurement of all features. The CALYPSO software allows for simultaneous display of actual condition, nominal profile, and deviations, making measurement results very easy to recognize and interpret. General data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM: 800 kg Workpiece, max.: 20 kg Noise level of the CMM: < 70 dBA Electrical data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Connection: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Rapid traverse speeds: Creep mode: SLOW function 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement mode Axis (X,Y): max. 200 mm/s Axis (Z): max. 50 mm/s Axis (3D): max. 287 mm/s Ambient conditions: For flawless operation of the coordinate measuring machine, the following conditions must be met. Ambient temperature for operational readiness: +17˚C to +35˚C Relative humidity: 40% to 70% (non-condensing) Kdjdpfx Adsw Titlspow Room temperature for measurement operation: 20˚C ±1 K Altitude above sea level: 100-125 V: max. 3000 m ASL 230-240 V: max. 2000 m ASL Probe system: Probe system: CFS Probe types: Probe type: CFS 2mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface tilt relative to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface tilt relative to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface tilt relative to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflection properties of the workpiece surface. Rotary table: Weight and resolution Rotary table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular velocity, max.: 50˚/s Rotational speed: 8.3 min-1 Scope of delivery: In the standard version, the coordinate measuring machine type O-INSPECT is supplied with the following components: Coordinate measuring machine (CMM) Controller (integrated) Control panel PC with peripherals Software - CALYPSO 5.2 Documentation Probe system Reference stylus Calibration standard Calibration template Scope of delivery: (Zeiss coordinate measuring machine as pictured) Condition: used (Changes and errors in the technical data and information are subject to correction!) Please ask about transport options before purchase. Further questions? We would be glad to answer them for you by phone.

Stanje: rabljeno, Leto izdelave: 2015, Obodni premer 1.500 mm Premer čelne plošče 1.250 mm Krmiljenje Siemens 840 DSL Nosilec orodja 4 kos Višina struženja 1.250 mm Skupna poraba moči / kW Teža stroja pribl. / t Prostorske zahteve (DxŠxV) pribl. / m Enostebrni karuselni stružni stroj | Schiess-Froriep 14 DKE 1250 Stroj je bil leta 2015 obnovljen pri podjetju Matschuk, nedavno očiščen in je v dobrem stanju. Kedpfx Asnp Uhrjdpsdw - Krmiljenje Siemens 840 DSL - Razno pribor Ogled možen kadarkoli po dogovoru. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Oznake: Schiess | Froriep | 14DKE | DKE1250

Stanje: rabljeno, Leto izdelave: 1970, Tlak 30 t Hod nastavljiv Kdsdpfx Adew U Epfopow Teža stroja cca 2 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P130030201, premer obdelovanca (maks.): 130 mm, Stacionarna optična merilna naprava za natančen nadzor dimenzij in oblike cilindričnih in valjastih komponent. Zasnovana za robustnost in prilagodljivost! TEHNIČNE PODROBNOSTI Območje premerov: 130 mm Natančnost pozicioniranja: 0,01 m OPREMA Kdjdpfoxqq Ahox Adpew Optična merilna glava z vertikalnim vozičkom Pogonski jermen z zobatim pasom in protizračnim mehanizmom

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Kaiser stiskalnica KSTU 500-30-75 RK Tlačna sila: 500 ton Nastavitev hoda: 50-250 mm Nastavitev kladiva: 200 mm Število hodov na minuto: 20-80 /min Maks. vgradna višina: 700 mm Dimenzije mize: 2.500 x 1.400 mm Dimenzije kladiva: 2.500 x 1.250 mm Podajalnik Kdjdpfexvpdhsx Adpsw Andritz Kaiser Največja širina traku: 800 mm Največja debelina traku: 5,0 mm Ravnalni stroj FECKER Največja širina traku: 800 mm Največja debelina traku: 6,0 mm Odvijalnik FECKER Širina traku: 800 mm Nosilnost: 8.000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 700 mm, merilno območje osi Y: 900 mm, merilno območje os Z: 500 mm, Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 08/1999 Last calibration: 09/2023 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm Machine features, equipment: C98 control with operator panel RDS sensor technology with RST 5-position probe change magazine RST 5x probing system Reference probe Probe accessories Calibration sphere PC with monitor Software: Calypso Basic 5.4 Loading system Further accessories and options available Ksdpoufgbnsfx Adpsdw Complete retrofit to C99 and latest Calypso version possible Available at short notice

Stanje: dober (rabljeno), Heinzinger We offer you a battery module tester here. Description: High-dynamic test bench energy system Bidirectional DC power supply with active energy recovery, liquid-cooled Voltage [max]: 20 - 600 V adjustable Current [max]: ±500 A adjustable System power [max]: ±160,000 W Mains connection (3/N/PE): 3x400V ±10% 47 ... 63Hz Software: Battery simulation software for load-change-optimized control Kdodpfxoq Nzwae Adpew Dimensions (W/H/D): 1800/2330/800 mm Type: ERS 600-500/160 Condition: used Scope of delivery: (See image) (Technical data subject to modification and errors!) For further inquiries, feel free to contact us by phone.

Stanje: rabljeno, Premer planske plošče 1.200 mm Premer vrtenja 1.500 mm Višina struženja 1.300 mm Bočni suport - horizontalni pomik 550 mm Pomik suporta 800 mm Krmiljenje Heidenhain Positip 855 Skupna priključna moč / kW Teža stroja pribl. / t Prostorska zahteva (DxŠxV) pribl. / m Enostebrični vertikalni stružni stroj | Jungenthal DK 1400 Kodenp Uhcjpfx Adpedw Stroj je bil leta 1996 obnovljen, nedavno očiščen in je v dobrem stanju. - Heidenhain Positip 855 krmiljenje - Nov upravljalni pult - Razni dodatki Ogled možen kadarkoli po dogovoru.

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Machine Details Stock no. 1022-E06322 Kdedpfx Adoxqn Nrepjw Machine type: Vertical Turning Lathe - Double Column Manufacturer: PITTLER Model: PV 4000 / 1-2 Year of manufacture: 2018 Condition: Control type: CNC Control: Siemens 840 D sl Location: Germany Country of origin: Germany Availability: Immediate Delivery terms: Ex foundation Price: Technical Details Faceplate diameter: 3,500 mm Swing diameter: 3,800 mm Turning height: 750 mm Control: Siemens 840 D sl Additional information CNC vertical turning lathe with one turning spindle and two tool turrets on two cross slides. The machine has been regularly serviced by the manufacturer and is in as-new condition. Technical Specifications: Max. Swing diameter: 3,800 mm Max. Working height: 750 mm Slide travel X1-axis: approx. 2,800 mm Slide travel X2-axis: approx. 3,200 mm Slide travel Z-axis: 1,000 mm Rapid traverse X/Z-axis: 32/20 m/min Faceplate (turning spindle unit with motor spindle): Speed: 100 rpm Torque: 67,000 Nm at 40% duty cycle Drive power: 200 kW at 100% duty cycle Load capacity (chuck, jaws, and workpiece): 35,000 kg Tool Turret: Double tool holder, Capto C8 For internal and external machining Speed range up to 6,000 rpm Torque approx. 120 Nm at 100% duty cycle Direct coolant supply to tool holders Double tool holder with swivel axis for turning and drilling operations (MFU) in conjunction with the tool magazine Equipment: CNC control Siemens 840 D sl Chuck: Röhm lever chuck KFG 3500/3/6/12 Tool magazine, 25 positions, left side of working area Tool magazine, 41 positions, right side of working area Maximum tool diameter: 150 mm Maximum tool weight: 20 kg Tool length: 400 mm Tool cleaning with compressed air Chip conveyor Coolant system 6 bar, 80 l/min Paper band filter, manufacturer Knoll High-pressure coolant pump 70 bar

Stanje: dober (rabljeno), For sale: WTW PH96 meter in good condition. Kedpfx Adsvdxu Nopjdw

Stanje: rabljeno, Leto izdelave: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clear space between frame walls: 590 mm Shut height: 690 mm Table size: 1500 x 880 mm Slotted opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement: approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading/unloading and automatic operation according to CE guidelines With steplessly adjustable drive, light barrier (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic die cushion in table (20 t), automatic central lubrication, control panel with two-hand operation Clear distance between tie rods: 940 mm Kdodpjvuun Tsfx Adpow Lateral pass-through: 900 mm

Stanje: dober (rabljeno), Keyence Model: VR-6200 + VR-6000 Technical Data: Measurable XY range: 300 mm × 150 mm *2 Object table XY travel: 278 mm × 134 mm Z travel: 69 mm Load capacity: 4.5 kg Working distance: 75 mm Imaging device: 4-megapixel CMOS, monochrome Macro mode: Magnification (based on a 15-inch monitor): 12× Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25× Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38× Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50× Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode: Magnification (based on a 15-inch monitor): 40× Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80× Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120× Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160× Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Display resolution: 0.1 μm Height measurement range Without image stitching in Z Macro mode: 10 mm Micro mode: 1 mm With image stitching in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 μm *1 With image stitching in Z 1.0 μm *1 Measurement accuracy Without image stitching in Z ±2.5 μm *1 With image stitching in Z ±4.0 μm *1 Only 50 operating hours! Kdodpfxjr Dby Io Adpow Includes software CD, without PC! Condition: (like new!) For further technical information, please refer to the manufacturer. Scope of delivery: (As illustrated!) (Specifications subject to change and errors excepted!) Should you have any questions, we are happy to assist you by phone.

Stanje: rabljeno, Premer Planscheibe 1.400 mm Obodni premer 1.600 mm Višina struženja 1.500 mm Krmiljenje Siemens 840 D Teža obdelovanca 6.500 kg Pomik 3.600 mm/min. Navpični pomik suporta 1.000 mm Kodpfxonp Uhno Adpsdw Hitrost vrtenja 10–315 mm/min. Skupna potrebna moč / kW Teža stroja cca. / t Potrebni prostor (DxŠxV) cca. / m Enostebrični karuselni stružnica | Froriep DS 14 NC Stroj je bil leta 2009 obnovljen, nedavno očiščen in je v dobrem stanju. - Krmiljenje Siemens 840 D - Menjalec orodij - Razni dodatki Ogled je možen kadarkoli po dogovoru.

Stanje: zelo dobro (rabljeno), For sale: EX355 POWER laboratory power supply in very good condition. Kdedpfx Aou Svugjdpew

Stanje: rabljeno, Leto izdelave: 1988, Pressure: 400 t Gap width: 1,100 mm Stroke: 250 mm Kdsdpfx Asvuuknsdpsw Stroke rate: 25 - 75 strokes/min Distance table/ram, max. stroke up, adjustment up: 900 mm Table area: 1,100 x 965 mm Ejector force in table: 30 t Ejector stroke in table: 80 mm Ejector force in ram: 3 t Ejector stroke in ram: 60 / 70 mm Ram area: 980 x 800 mm Side frame passage: 800 mm Ram adjustment: 20 mm Drive power: 80.0 + 5.5 kW Weight: 47.0 t Space requirement (W x D x H): 3.5 x 3.3 x 6.0 m Control cabinet weight: 1.4 t Control cabinet dimensions (W x D x H): 4.9 x 0.5 x 2.6 m Multistage cold forging press with articulated drive with steplessly adjustable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the ram, motorized ram adjustment, pneumatic compensation cylinder in the press frame, table ejector (cam controlled, 30 t / 80 mm), pneumatic ejector in ram (3 t, 60 mm), motorized central lubrication. Can be offered without commissioning, or alternatively complete with new Siemens S7-1500 F control system.

Stanje: rabljeno, Werth Type: Werth SCOPE-CHECK 400 3D Coordinate Measuring Machine Technical Data: Measuring capacity (X x Y x Z): 400 x 200 x 200 [mm] Worktable with integrated electrical cabinet: 1600 x 950 x 780 [mm] Max. table load: 20 [kg] Operating conditions: * Relative humidity, 40 - 70 [%] * Temperature: 10 - 40 [°C] Measuring precision (20°C, 8 kg, magnification 5X, resolution 0.5 micron) On table, E1 = 1.8 + L/120; E2 = 2.0 + L/150 All positions, E1 = 2.5 + L/120; E2 = 2.9 + L/100; E3 = 4.5 + L/75 Incremental scales Ball screw drive with servo motor Optical magnification (video): 0.5X to 5X Ksdpfxju Iub Rs Adpsdw Optical field (video): 13 x 10 [mm] to 1.3 x 1 [mm] Movement on linear guide with balls Combinable illumination: transmitted light, coaxial LED ring light/axial Voltage: 230 [V] Frequency: 50 [Hz] Power: 2 [kW] Weight: 300 [kg] Accessories: CN Lighting control via software Video sensor IP for measurement contour detection (screen display) Electronic control for table movement Manual joystick control for table Prepared for mechanical probe Calibration, 3D measurement, probe communication software Scope of delivery: (Werth coordinate measuring machine with accessories as shown) Condition: used (Technical data and specifications subject to change and error!) Please inquire about transport options before purchase. Further questions can be answered by telephone.

Stanje: rabljeno, Premer planske plošče 1.000 mm Obodni premer 1.400 mm Višina struženja 1.100 mm Število vrtljajev 500 obr/min Krmiljenje Siemens 840 DSL Shop Turn Ksdpenp Uhkefx Adpedw Premik suportov 1.000 mm X-os 2.000 mm Z-os 700 mm Hitri pomik 6.000 mm/min Skupna potrebna moč 62 kW Teža stroja cca / t Potrebni prostor (D x Š x V) cca / m Enostebrni karuselni stružni stroj | Dörries VCE 1400 Stroj je bil leta 2010 generalno obnovljen pri podjetju Hering, pred kratkim očiščen in je v dobrem stanju. - Krmiljenje Siemens 840 DSL Shop Turn - Razno pribor Ogled je možen kadarkoli po dogovoru.

Stanje: rabljeno, Leto izdelave: 1996, Tlak 16 t Hod 4 - 70 mm Število hodov 140 /min Izrast 200 mm Vgradna višina 365 mm Površina mize 420 x 390 mm Prehodna odprtina v mizi 160 x 120 mm Višina mize nad tlemi 650 - 840 mm Nastavljiva miza 190 mm Plošča bata 160 x 125 mm Nastavitev bata 80 mm Pogonska moč 2,2 kW Teža 1,4 t Kjdowc U Iuopfx Adpsdw Potrebni prostor (ŠxDxV) 1,0 x 1,6 x 2,0 m Dovoljeno za ročno vstavljanje po CE standardu Z motorjem, hidravlično kombinacijo sklopke/zavore, mehanskim preobremenitvenim varovanjem v batu, ročnim nastavljanjem hoda, ročnim nastavljanjem bata, nastavljivo mizo, motornim centralnim mazanjem, dvoročnim upravljanjem.

Stanje: rabljeno, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. Kdjdpfx Aoxcwxgedpew The device impresses with its precision, reliability, and versatility in industrial metrology. Features & Specifications: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capability (optical and tactile measurements possible) - Design with Moving-Bridge System (MB/Z) for high stability and flexibility - High precision when measuring complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality assurance, production monitoring, and development areas Additional equipment – Renishaw TP200 probe system The high-precision, tactilely triggered Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It enables quick probe exchange and precise measurements with long styli. Main features: - Strain gauge technology: Minimal deflections are detected with extreme accuracy – typical errors such as “lobing” are eliminated. - High precision: Repeatability up to 0.4 µm, 2D probing uncertainty ±0.8 µm - Fast probe exchange: Automatic probe module change with SCR200 change rack, no recalibration needed - Robust: Probe module life exceeds 10 million touches - Flexibility: Standard (SF) and low-force (LF) modules for sensitive materials - Compatibility: Can be used with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, Interface PI200 - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Probe styli: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of delivery: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probing system incl. probe modules - Accessories as shown in the attached pictures Important note: "The table shown in the photos is not included in the sale." (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Stanje: rabljeno, Leto izdelave: 2007, Pressing force: 63 t Stroke: 8 - 120 mm Strokes per minute: 40 - 120 Throat depth: 280 mm Clearance between frame walls: 325 mm Daylight opening: 440 mm Table size: 820 x 580 mm Through-hole in table: 200 mm Table height above floor: 830 mm Ram area: 470 x 340 mm Ram adjustment: 100 mm Kdodpowc U Inofx Adpsw Drive power: 4.0 kW Weight: 5.2 t Space requirements (W x D x H): 1.3 x 1.8 x 2.8 m Approved for manual loading operations according to CE standards with infinitely variable drive, pneumatic clutch/brake combination, light curtain (Sick), hydraulic overload protection, pneumatic ram weight balancing, manual stroke adjustment, manual ram adjustment, central lubrication, fixed table, two-hand and foot operation

Stanje: dober (rabljeno), Heinzinger Type: ERS 600-500/160 Description: Battery Module Tester High-dynamic Test Bench Power System Kdedpjq Nzwhofx Adpsw Bidirectional DC power supply unit with active energy recovery, liquid-cooled Voltage [max]: 20 - 600 V adjustable Per channel current [max]: ± 500 A adjustable System power [max]: ± 250,000 W Mains connection (3/N/PE): 3x400V ±10% 47 ... 63Hz Software: Battery simulation software for load-change-optimized control Dimensions (W/H/D): 2400/2330/800 mm Condition: used Scope of delivery: (see photo) (Technical data and information subject to change and error!) If you have any further questions, we are happy to answer them by phone.

Stanje: rabljeno, Leto izdelave: 2003, Tlak 63 t Hod 10 - 120 mm Število hodov 40 - 120 /min Izvlek 280 mm Kdjdpfxovzxtts Adpsw Prehod med stenami ohišja 325 mm Vgradna višina 430 mm Velikost mize 820 x 580 mm Prehodna odprtina v mizi 200 mm Višina mize nad tlemi 830 mm Površina bata 470 x 340 mm Nastavitev bata 100 mm Pogonska moč 4,0 kW Teža 5,20 t Prostorske zahteve cca. 1,3 x 1,7 x 3,1 m STISKALNICA JE TAKOJ PRIPRAVLJENA ZA UPORABO! Odobreno za ročno vstavljanje delov v skladu s CE-normo, s tekoče nastavljivim pogonom, pnevmatsko sklopko/zavoro (OBNOVLJENA 2025), svetlobno zaveso (Sick), hidravličnim varovanjem pred preobremenitvijo, pnevmatskim izravnavanjem mase bata, ročno nastavitvijo hoda, ročno nastavitvijo bata, fiksno mizo, dvoročno in nožno upravljanje.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Professional handheld measuring system for precise 3D measurements directly in production environments. Product Description: For sale is a used KEYENCE XM-2000 coordinate measuring system including XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workstation—without the need for a metrology room, elaborate setup, or specialized CMM expertise. This device is ideally suited for manufacturing operations, quality assurance, first article inspection reports (FAIR), in-process controls, as well as for reverse engineering applications. Technical Data – KEYENCE XM-C1000 / XM-H1000 (XM Series) Measuring System (General) Specification: Measuring Range (XYZ): approx. 600 × 300 × 200 mm (depending on setup) Measuring Accuracy: ±(8 + L/80) µm (L = measuring length in mm) Repeatability: ±3 µm (typical) Resolution: 1 µm Measuring Principle: Optical tracking with camera-based acquisition Calibration: User calibration with calibration sphere possible CAD Comparison: Direct on the device (supports STEP, IGES, etc.) Export Formats: PDF, Excel, CSV, DXF Tolerance Evaluation: Automatic with color-coding XM-C1000 – Control and Evaluation Unit (Controller) Component: Display: 15-inch touchscreen Connections: USB, LAN, HDMI, power connection Storage Options: Internal + USB export Software Functions: Measurement, CAD comparison, report generation Operation: Touchscreen + button operation Languages: Multilingual (including German) XM-H1000 – Handheld Measuring Probe Specification: Probe Type: Hand-guided with push button Feedback: LED status indicator, vibration feedback Probe Tip: Interchangeable, various tips available Tracking: Detected by the controller’s camera system System Characteristics Specification: Operating Temperature: 10–35 °C Power Supply: 100–240 V AC, 50/60 Hz System Dimensions (complete): approx. 800 × 600 × 800 mm (depending on setup) Weight (total system): approx. 25–40 kg (depending on configuration) Mounting: On table or optional measuring table Scope of Delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & Delivery: Shipping via freight company Self-collection by appointment possible. International shipping available upon request. Kodpfx Adewxvmdepsdw Should you have any questions, require further information, or wish to arrange an inspection appointment, please do not hesitate to contact us. (Technical data and specifications are subject to change and error!) We would also be happy to answer further questions for you by phone.

Stanje: rabljeno, Leto izdelave: 1987, Pressure: 80 t Throat depth: 380 mm Stroke: 8 - 112 mm Strokes per minute: 60 Kodpfevuk Snjx Adpodw Distance table/ram, largest stroke up, adjustment up: 472 mm Table surface: 840 x 610 mm Table height above floor: 800 mm Clearance between side frames: 520 mm Ram area: 650 x 400 mm Ram adjustment: 70 mm Drive motor power: 7.5 kW Weight: 6.9 t Required floor space (LxWxH): 1.1 x 2.15 x 3.2 m Approved for manual feeding operations according to German accident prevention regulations (UVV) Equipped with electric motor, pneumatic clutch/brake combination, mechanical overload protection in the ram, tie rods for improved frame rigidity, two-hand operation Sold as is, EXCLUDING commissioning, EXCLUDING control cabinet Commissioning (with new control system) available on request

Stanje: dober (rabljeno), Hexagon Type: Hexagon Optiv Performance 442 Product Description: The Optiv Performance 442 is a 3D multi-sensor coordinate measuring machine that combines optical and tactile measurement in a single system. The system supports multi-sensor measurement with vision sensor, tactile probe, TTL laser (Through-The-Lens), as well as the innovative Chromatic White Light Sensor (CWS). The base unit with vision sensor can be modularly upgraded with all available sensors. Applications: - For use on level surfaces - Versatile geometry measurements and GD&T analysis with standard accuracy Construction: • Vibration-dampening granite frame with fixed bridge and movable table • Integrated base with optional vibration dampers Guides: • Precision mechanical linear guides on all axes Ksdsu Szpmopfx Adpodw Drives: • DC servo motors with backlash-free ball screw drives located at the center of gravity Length Measuring System: • Incremental length measuring system Resolution: • 0.1 μm The Hexagon Optiv 442 multi-sensor measuring device is equipped with camera, laser, and Renishaw probing system. • Measuring range per single sensor: 410x410x200 mm • Dimensions: 1232x910x1663 mm • Weight: approx. 940 kg • Max. load (glass plate): 30 kg • Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) • Max. axis travel speed: 200 mm/s • Camera with 2-step zoom • Laser • LED ring light • Renishaw 6-position probe changer • Renishaw TP200 probe system • Monitor operation • Windows 7 Ultimate evaluation station • Measuring machine: HEXAGON Optiv 442 Electrical specs: Voltage: 115/230 V ±10% Frequency: 50/60 Hz ±5% Power consumption: 1000 VA Weight: approx. 1100 kg Condition: used Scope of delivery: (see picture) (Subject to technical data changes and errors!) If you have further questions, please feel free to contact us by phone.