Mazak Quik Turn 10 M nakup rabljenega (300)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, potovalna razdalja osi X: 1.120 mm, pomik osi Y: 510 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: PC-Fusion-CNC 640M, skupna višina: 2.651 mm, skupna širina: 2.825 mm, obremenitev mize: 800 kg, skupna masa: 6.000 kg, največja hitrost vretena: 10.000 obr/min, moč vretenovega motorja: 15.000 W, število mest v zalogovniku orodij: 24, teža orodja: 8.000 g, največja dolžina izdelka: 2.915 mm, število osi: 3, This 3-axis Mazak VTC 200 B was manufactured in 2001. It offers an impressive X-axis travel of 1120 mm, a Y-axis travel of 510 mm, and a Z-axis travel of 510 mm. The machine features a robust table measuring 1460 x 510 mm with a maximum table load of 800 kg. If you are looking for a high-quality milling machine, consider the Mazak VTC 200 B vertical machining center, which we are offering for sale. Contact us for further details. • Machining Capacity: • Milling (S45 JIS): 416 cm³/min • Drilling (S45 JIS): 25 mm • Tapping (S45 JIS): M24 x P3 • Table: • Size: 1460 × 510 mm • T-slots: 5 • T-slot spacing: 100 mm • T-slot width: 18 mm • Table height: 750 mm • Spindle: • Spindle nose to table: Max 690 mm / Min 180 mm • Spindle center to column: 530 mm • Spindle motor: • 10 min: 15 kW • 30 min: 11 kW • Continuous: 7.5 kW • Maximum torque: 98 Nm • Rapid traverse: • X: 30 m/min • Z: 30 m/min • Cutting feed: • X: 8 m/min • Z: 8 m/min • Tool changer: • Tool type: CAT40 • Max. tool diameter with adjacent tool: 80 mm • Max. tool diameter without adjacent tool: 110 mm • Max. tool length: 350 mm • Tool change time (chip-to-chip): 4.7 s • Coolant system: • Tank: 300 L • Pressure: 0.5 kg/cm² • Flow rate: 20 L/min • Electrical Data: • Installed power: 22.7 kVA • Air supply: • Pressure: 5 kg/cm² • Consumption: 140 L/min • Standard Equipment: • Full enclosure • Through-spindle coolant • Automatic tool length measurement • Adaptive feed control • Tool life monitoring • Tool breakage detection • RS-232C interface • PCMCIA interface • 3.5" floppy disk drive • CE-compliant machine • Preparation for side chip conveyor • Note: The machine is prepared for a side chip conveyor (conveyor not included) Gbjdpfjy S Sw Sex Ahmjn Technical Specification Taper Size ISO 40

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 1.889 h, laserska moč: 2.000 W, najv. debelina jeklene pločevine: 15 mm, maks. debelina pločevine iz nerjavečega jekla: 8 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been very well maintained, regularly cleaned and serviced. It is in as-new condition! TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Max. sheet thickness: 15 mm Max. steel thickness: 15 mm Max. stainless steel thickness: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Degree of automation: Automatic Drive type: Electric Input voltage: 380 V Input current type: Three-phase Laser on-time hours: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT Godpfsy Tvzksx Ahmobn CE marking Documentation/manual Safety light barrier Pallet changer Exhaust system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 67 h, moč vretenovega motorja: 22.000 W, največja hitrost vretena: 3.300 obr/min, potovalna razdalja osi X: 615 mm, pomik osi Y: 260 mm, pomik po osi Z: 1.585 mm, skupna masa: 16.600 kg, proizvajalec krmilnikov: MAZATROL, število osi: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features simultaneous 5-axis machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine is equipped with a robust tool magazine holding 72 positions and includes both a main and a second spindle to expand its capabilities. If you are looking for high-quality turning and milling functions, you should consider the Mazak INTEGREX i-200 S turning-milling center. Contact us for further details. • Operating time: approx. 68 hours • Availability: Immediate • Key Features: • Full simultaneous 5-axis machining • Main spindle + sub spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup • Capacity and work area • Maximum swing: Ø658 mm • Swing over cross slide: Ø658 mm • Maximum machining diameter: Ø658 mm • Maximum machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (sub spindle): Ø65 mm • Maximum support weight (main spindle): 650 kg • Maximum support weight (sub spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor power: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blower system: Included • Additional equipment: Heavy-duty spindle HD1; removal of standard spindle cylinder and chuck • Sub spindle (HD2) • Chuck size: 8" • Maximum speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor power: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling spindle • Maximum speed: 12,000 rpm • Motor power: 24 kW • Cooling: oil & air • Tool interface: HSK-A63 (T63) • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travel • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: tool breakage detection in magazine; overload detection • CNC functions and software • 5-axis machining package • 5-axis tool radius compensation • Cylindrical interpolation • Polar coordinate interpolation • Synchronous thread cutting with milling spindle • Cooling and preparation • Coolant through spindle: 7 MPa • Prepared for mist extraction system • Highlights • Practically new condition with only approx. 68 hours operating time • Very extensive factory configuration • Full simultaneous 5-axis machining • Main and sub spindle configuration • 72-tool CAPTO magazine • Production-ready with significant savings compared to new Additional Equipment • Chip and parts handling • Side chip conveyor - Consep type • Belt conveyor for parts • Bar loading and workpiece handling Gedpfx Ahey Sltgomsbn • LNS QLS II bar loader • Interface kit for bar loader • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70-V-I-R-FM • Year: 2018 • Other accessories • Mounting anchors for the machine • 3-color machine status signal light Technical Specification

Stanje: rabljeno, Leto izdelave: 1984, x-travel 1000 mm Godpfotqqk Iex Ahmsbn y-travel 508 mm z-travel 460 mm Pallet size 1240 x 550 mm Number of pallets 2 Workpiece weight 800 kg Spindle taper ISO 40 Spindle drive 5.5 kW Speed range 28 - 4000 rpm Number of tool magazine stations 30 Control MAZATROL M 1 Total power requirement kW Machine weight approx. 5.6 t Space requirements approx. 4.50 x 3.00 x 2.65 m Accessories: chip conveyor

Stanje: rabljeno, Leto izdelave: 1998, Pomik po osi X 1120 mm Gbedpfx Aey Ty Eaohmsn Pomik po osi Y 510 mm Pomik po osi Z 510 mm Krmilnik Mazatrol M Plus Območje vrtljajev vretena 0–7000 min⁻¹ Vpenjalo za orodje Cat 40 Magazin za orodja s 24 mesti Maks. obremenitev mize 500 kg Dimenzije mize (D x Š) 1460 x 510 mm Dimenzije stroja 3600 x 2700 x 2590 mm Teža stroja ca. 5850 kg Oprema/pribor: - 4 primeži - 1 vpenjalna glava - 18 nosilcev orodij z orodji - Transportni varovalni elementi - USB ključek z varnostno kopijo podatkov - Tehnična dokumentacija Cena vključuje varnostno kopiranje podatkov, demontažo in nakladanje.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Opis: Gbjdpfx Aey Rgcyohmon Stroj je v dobrem tehničnem stanju, možnost preizkusa po predhodnem dogovoru. Matrix NEXUS 2 – krmilni sistem. Paleti 2x DA. Transporter za ostružke DA. ATC – DA. Visokotlačno hlajenje 70 bar. Vreteno 10.125 ur. Skupni čas vklopa stroja 32.348 ur. Paleta 630 × 630 mm. Število palet: 2. Največja dimenzija obdelovanca Ø 1050 × 1300 mm. Največja obremenitev palete 1500 kg. Hodi: X 1050 mm, Y 900 mm, Z 980 mm. 4. os DA (NC rotacijska miza). Stožec vretena BT50 / CAT50. Obrati vretena 8000 min⁻¹ (standardno). Opcijsko obrati 10.000 min⁻¹. Moč vretena cca 37 kW. Zaloga orodij 40–120 mest. Krmilni sistem Mazatrol Matrix Nexus 2. Tip proizvodnje: serijska proizvodnja. Tipična uporaba: ohišja, litina, jeklo, avtomobilska industrija. Teža stroja cca 20–22 t. Avtomatska menjava palet DA.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Opis: Gbodsy Rgcmopfx Ahmsn Stroj je v dobrem tehničnem stanju, po predhodnem dogovoru je možen preizkus. Idealna rešitev za popolno obdelavo v eni vpenjalni operaciji (struženje + rezkanje). Oprema in parametri: - glavno vreteno + protivreteno (popolna obdelava z obeh strani) rezkalno vreteno z osjo B krmiljenje Mazatrol SmoothG zalogovnik za orodja s 36 pozicijami Capto C6 / PSC63 notranje hlajenje veliko dodatne opreme (čeljusti, vpenjala, držala ipd.) prodaja vključuje delujoč postprocesor za SolidCAM izrazit prihranek časa in stroškov pri uvedbi stroja v proizvodnjo

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with turning function and top-spec equipment. Control unit: MAZATROL Matrix Year of manufacture: 2008 Travel - X axis: 630 mm Travel - Y axis: 765 mm Travel - Z axis: 600 mm a-axis: +30° to -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. working height: 500 mm Tool magazine capacity: 80 positions Tool holder: SK40 Gbsdpox Db D Aofx Ahmen Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Workpiece swing diameter: 730 mm Accessories: • Chip conveyor and tank • Through-spindle coolant (high-pressure coolant system) • Showa oil mist extraction unit • Renishaw probe The following equipment/options are included: • Linear scale system for X/Y axes • Tool magazine for 80 tools • Air blow unit at the workpiece • Oil mist collector CRK 1500K • Coolant temperature control • Flood cooling 4.5 bar • Workpiece flushing device • High-pressure through-spindle coolant 70 bar • Pressure switch for through-spindle coolant • Right-hand chip conveyor discharge (Consep) • MAZAK Monitoring System B, incl. Renishaw probe MP10 • Preparation for visual tool recognition system • Detachable electronic handwheel • Synchronous thread cutting on spindle • Tool tip inspection for 5-axis simultaneous machining • Tool radius compensation for 5-axes • EIA dynamic tool compensation 2 (incl. 1) • Max. program memory 8 MB • Rapid traverse – constant tilt angle during movement • MAZACC-3D high-speed software package • Form compensation for rotary axes • Ethernet operation function • High-precision control for finish machining • Cylinder interpolation G07.1 • Signal lamp (3-color LED) • 3-jaw chuck, 21" • Additional workspace lighting The machine is in very good condition and can be inspected under power at its current location.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 13.006 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 190433, stružna dolžina: 1.050 mm, premer struženja: 660 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 150 mm, pomik po osi Z: 1.050 mm, model krmilnika: Mazatrol Matrix, Tehnički podaci potiču iz podataka proizvođača. Prodavac ne može preuzeti garanciju za to! Radni sati prema upravljaču: Ukupno: 5.025 h Automatska obrada: 1.866 h Čista obrada RV1: 1.037 h Čista obrada RV2: 298 h Radno vreme: 13.006 h Tip alata: Capto C6 Menjač alata: 72 mesta Revolver: 9 mesta Dimenzije (D x Š x V): cca 5 x 3 x 3 m TEHNIČKI DETALJI Gedsy Slqfspfx Ahmsbn Maks. prečnik obrade: 660 mm Prečnik iznad ležišta: 760 mm Dužina obrade: 1.050 mm X-osovina: 580 mm Y-osovina: 150 mm Z-osovina: 1.050 mm Broj obrtaja glavnog vretena: 5.000 o/min Broj obrtaja kontra vretena: 5.000 o/min Milling vreteno: 12.000 o/min DETALJI O MAŠINI Upravljanje: Mazatrol Matrix Glavni električni krug: 3AC Napon glavnog strujnog kruga: 400 V Frekvencija: 50/60 Hz Upravljački strujni krug AC: 100 V Upravljački strujni krug DC: 24 V Maksimalna potrošnja glavnog motora: 84 A Napon glavnog motora: 400 V Nazivna snaga: 91,8 kVA Težina: 11.800 kg OPREMA Ubacivač šipki

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, potovalna razdalja osi X: 560 mm, pomik osi Y: 430 mm, pomik po osi Z: 510 mm, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 30, število osi: 3, Ta 3-osni Mazak VCS 430A je bila izdelana leta 2014. Opremljena je z maksimalnimi vrtljaji vretena do 12.000 vrt/min in ima delovno mizo dimenzij 900 x 430 mm. Stroj je opremljen s CNC upravljanjem Mazatrol Smart in premore kapaciteto za 30 orodij. Če iščete visoko kakovostne možnosti obdelave, razmislite o nakupu našega vertikalnega obdelovalnega centra Mazak VCS 430A. Za več informacij nas kontaktirajte. • Velikost mize: 900 x 430 mm Dodatna oprema Gbedoy Ncyfepfx Ahmsn • Vgrajena naprava za prednastavitev orodji • Hlajenje skozi vreteno (hladilno sredstvo v vretenu)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Tehnične informacije o Mazak Corporation Mazak VTC-300C II: Model: Mazak VTC-300C II Vrsta stroja: Vertikalni CNC-obdelovalni center Leto izdelave: 2003 Serijska številka: 162107 Dodatna oprema: transporter za ostružke priložen Priključna moč: 28 kW Tipične tehnične lastnosti Mazak VTC-300C II: Krmiljenje: Mazatrol Fusion 640M / Mazatrol PC Fusion CNC Pomiki: X-os: pribl. 1.740 mm, Y-os: pribl. 760 mm, Z-os: pribl. 660 mm Gsdpey St E Rsfx Ahmebn Velikost mize: pribl. 2.000 × 760 mm Obremenitev mize: do pribl. 1.400–1.500 kg Vretenov vpenjalni sistem: CAT 40 / BT40 Število vrtljajev vretena: večinoma 10.000 min⁻¹ Glavna vretenova moč: pribl. 18,5–22 kW Menjalnik orodij: 30 mest Hitri pomik: pribl. 36 m/min Sistem za hlajenje: priložen Teža stroja: pribl. 11.000–13.000 kg Stroj spada v veliko serijo VTC proizvajalca Mazak in je posebej primeren za: velike aluminijaste dele obdelavo jekla avtomobilsko proizvodnjo proizvodnjo priprav in serijsko proizvodnjo

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 2.500 mm, Mazak INTEGREX 50YR-2500U – Tehnični podatki Gbsdpeyuucnefx Ahmsn Tip stroja: CNC stružno-rezalni center / multitasking Proizvajalec: Mazak Krmiljenje: MAZATROL PC-Fusion CNC 640MT Leto izdelave: 1999

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 510 mm, pomik po osi Z: 560 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: 640M, skupna višina: 2.823 mm, skupna širina: 3.160 mm, obremenitev mize: 1.500 kg, skupna masa: 8.900 kg, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 18.500 W, teža orodja: 20.000 g, največja dolžina izdelka: 3.436 mm, število osi: 4, This 4-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece capacity of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers rapid traverse speeds of 26 m/min in X/Y and 20 m/min in Z. If you are looking for high-quality milling capabilities, the Mazak V515/40N vertical machining center is an ideal choice. Contact us for further details. • Milling capacity in S45 (JIS): 634 cm³/min • Drilling capacity in S45 (JIS): 50 mm • Table size: 1,300 mm x 550 mm Gbedpfxjy I Amvs Ahmon • Table configuration: 5 T-slots, 100 mm spacing, 18 mm reference slot • Table height from floor: 800 mm • Spindle nose to table: 200 mm - 760 mm • Spindle center to column: 525 mm • Rapid traverse (X/Y): 26 m/min • Rapid traverse (Z): 20 m/min • Feed rate (X/Y/Z): 8 m/min • Minimum spindle speed: 25 rpm • Maximum torque: 758 Nm • Max. tool diameter: 125 mm (adjacent), 260 mm (next position empty) • Max. tool length: 400 mm • Chip-to-chip time: 5.5 s • Coolant tank capacity: 200 l • Coolant pump power: 0.75 kW • Connected load (30 min/100%): 41.2 KVA / 36.2 KVA • Compressed air supply: 5 kg/cm², 200 L/min Additional equipment: • Extraction system: Donaldson Torit DCE • Chip conveyor: Mayfran

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 530 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: MATRIX 2, širina mize: 550 mm, dolžina mize: 1.300 mm, obremenitev mize: 1.200 kg, skupna masa: 7.700 kg, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 30, To 3-osno vertikalno obdelovalno središče Mazak VCS 530C je bilo izdelano leta 2015. Opremljeno je z robustnim krmilnim sistemom Mazatrol MATRIX 2, dimenzijo mize 1300x550 mm in največjo obremenitvijo mize 1200 kg. Vreteno deluje z do 12.000 vrt/min in ima stožec ISO 40. Stroj ima 30-pozicijski magazin za orodje in dve paleti. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra Mazak VCS 530C. Za dodatne informacije nas kontaktirajte. Gbodpsy Iz Rasfx Ahmsn Dodatna oprema • Tipalo za obdelovanec in orodje • Sistemski izsesovalec oljne megle • Lovilec olja Prednosti stroja Tehnične prednosti stroja • Hladilno mazanje skozi vreteno: 15 barov • Število palet: 2 • Stroj je v zelo dobrem tehničnem stanju. Dodatne informacije Stroj je še vedno pod napetostjo Tehnične specifikacije Stožčasta velikost: ISO 40

Stanje: rabljeno, Various tool holders from Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken, and others. Turning and milling tools with VDI 40 interface. Available for sale only by pallet. Pallet 5: EUR 2,730 total - 3x driven tools VDI 40: EUR 580 each - 11x tool holders VDI 40: EUR 90 each Pallet 6: EUR 2,640 total - 3x driven tools VDI 40: EUR 580 each - 10x tool holders VDI 40: EUR 90 each Pallet 7: EUR 2,640 total - 3x driven tools VDI 40: EUR 580 each - 10x tool holders VDI 40: EUR 90 each Pallet 8: EUR 2,730 total - 3x driven tools VDI 40: EUR 580 each Gbsdpfx Ahjvry T Njmsn - 11x tool holders VDI 40: EUR 90 each

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Krmiljenje Mazatrol T-Plus Maks. premer struženja 470 mm Maks. premer nihanja 575 mm Dolžina struženja 1.500 mm Hitrost vretena 3.000 min-1 Magazin za 40 orodij (KM 63/SK 40) B-os Y-os Luneta Gbjdpsy Ehm Asfx Ahmen Repati konjiček Transporter za ostružke

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 196 mm, premer struženja nad prečnim suportom: 130 mm, hitrost vretena (min.): 6.000 obr/min, Premer palice (maks.): 36 mm, skupna masa: 1.900 kg, Oprema: dokumentacija / priročnik, For sale: CNC Lathe Yamazaki Mazak QT-6T in Excellent Condition We offer for sale a used Yamazaki Mazak QT-6T CNC lathe, made in Japan, in excellent operating and mechanical condition. The machine is currently in production, fully functional, and can be demonstrated under power by arrangement. Machine Details - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of manufacture: 1999 - Serial Number: 39178 - Country of origin: Japan - Control system: Mazatrol - Configuration: 2-axis CNC Lathe (X / Z) - Machine weight: approx. 1,900 kg Main Equipment - 6" Chuck - Collet Chuck - Complete collet set - Bar working capacity up to 36 mm - 8-position turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant system - Fully operational condition Included Equipment - Fedek bar feeder - Feeder length: 1.5 m - Pneumatic bar pusher system - 6" Chuck - Collet Chuck - Complete collet set - Complete set of tool holders - Manuals and technical documentation - Various accessories and attachments Technical Specifications - Max. machining diameter: approx. 130 mm - Max. machining length: approx. 196 mm - Spindle bore diameter: approx. 45 mm - Max. spindle speed: up to 7,000 rpm - Bar working capacity: 32–36 mm - X-axis travel: approx. 80 mm - Z-axis travel: approx. 200 mm - Rapid traverse X/Z: up to 30 m/min Machine Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ In active production ✔ Ready for immediate use ✔ Test under power possible ✔ All machine manuals and documentation available Gbodpfxezal Rae Ahmen Additional Information The machine is offered as a complete production package and is ideal for bar work, small and medium batch production, as well as high-precision operations. Loading assistance available. Operation video can be provided upon request.

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina 2105 mm Mere globina 3485 mm Teža stroja 7500 kg Krmilna enota Znamka MAZATROL Glavni pogon Območje vrtljajev vretena 3500–5000 vrt/min Premer vretena 61 mm Število osi 4 Pomiki Gbodpfox D N Ipsx Ahmjn Pomik X-osi 530 mm Podajalna sila X-osi 0–6000 mm/min Hitri pomik X-osi 30 m/min Pomik Y-osi ±70 mm Podajalna sila Y-osi 0–6000 mm/min Hitri pomik Y-osi 15 m/min Pomik Z-osi 1065 mm Podajalna sila Z-osi 0–6000 mm/min Hitri pomik Z-osi 33 m/min Konjiček Premer pinole 80 mm Hod pinole 870 mm Stožec pinole MK4 Orodja Število postaj 20 Največja teža orodja 7 kg Največji premer orodja 90 mm Največja dolžina orodja 250 mm Ta 4-osni Mazak INTEGREX 200 Y je bil izdelan leta 2000. Odlikuje ga največji premer struženja 540 mm, premer zamaha 540 mm ter zmogljivost premera palice 51 mm. Stroj omogoča obdelavo kosov mase do 150 kg ter ponuja področje vrtljajev vretena do 5.000 vrt/min. Opremljen je z Mazak KM 63 sistemom za hitro menjavo orodij s 20 mesti. Če iščete visokokakovostne stružne zmogljivosti, razmislite o našem stroju Mazak INTEGREX 200 Y v prodaji. Za več informacij nas kontaktirajte. Vrsta uporabe Struženje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.660 mm, pomik osi Y: 510 mm, pomik po osi Z: 510 mm, dolžina obdelovanca (maks.): 4.000 mm, širina obdelovanca (maks.): 655 mm, višina obdelovanca (maks.): 640 mm, teža obdelovanca (maks.): 1.000 kg, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 16 letvica, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Prodaja se Mazak VTC 200C II, vključno s Kitagawa rotacijsko mizo (4. os). Stroj je v zelo dobrem stanju in je takoj pripravljen za uporabo, možen je ogled pod napetostjo. Prevoz in montaža sta na željo možna po dogovoru. Tehnični podatki - Krmiljenje: MAZATROL 640M Širina stroja: 2819 mm Višina stroja: 2870 mm Teža stroja: 9100 kg Dolžina mize: 2000 mm Širina mize: 510 mm X-hod: 1660 mm Y-hod: 510 mm Z-hod: 510 mm Oprema: -Število orodij: 30 -Moč vretena: 15 kW -Št. vrtljajev vretena: 12.000 RPM Gbedpfsy Ndzdox Ahmjn -Notranje hlajenje 16 bar -Zunanje hlajenje -Renishaw merilna tipalka OMP60 -Kitagawa 4. os -Avtomatska funkcija ogrevanja Glavno vreteno je bilo leta 2025 zamenjano oz. obnovljeno.

Leto izdelave: 2001, stanje: generalkompletno obnovljen (rabljeno), Affordable MAZAK Laser Cutting System NTX48 1.5kW Year of manufacture: 2001 Very well-maintained, completely overhauled MAZAK laser machine with 1500W Sheet size: 2500mm x 1250mm Minimal installation footprint: 2.6m x 6m Small parts conveyor belt Godpfehturcsx Ahmobn Fully enclosed machine cover Mild steel: up to 12mm Stainless steel: up to 6mm Plastic processing possible Incl. software Incl. warranty Incl. extraction system Incl. commissioning and training Machine can be tested under power! ===Optional: Fully automatic loading and unloading available===

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), - RABLJEN - 8-OSNI CNC STRUŽNICA Z REZKALNO GLAVO, SPODNJO REVOLVERSKO GLAVO IN KONTRA VRETENOM MAKS. PREMER VRTENJA: 660 mm MAKS. DOLŽINA STRUŽENJA: 1495 mm MAKS. PREMER STRUŽENJA: 660 mm PREMER PALICE: 65 - 65 mm VRETENO: 35-5000 vrt./min; 22 kW; 254 mm KONTRA VRETENO: 35-5000 vrt./min; 18,5 kW; 254 mm GLAVA: CAPTO C6; -30°+195°; 15-12000 vrt./min; 18,5 kW HOD OSI X: 580 mm HOD OSI X2: 150 mm Godpfx Aheyy Thzemsbn HOD OSI Y: 160 mm HOD OSI Z: 1545 mm HOD OSI Z2: 1490 mm HOD OSI B: 1550 mm HITRI POMIKI X-Y-Z: 38 - 26 - 38 m/min REVOLOVERSKA GLAVA: 9 POZICIJ MAGAZIN ORODIJ: VERIŽNI TIP; 80 POZICIJ VISOKOTLAČNO HLAJENJE: 18 Bar KRMILNA ENOTA: MAZATROL MATRIX TEŽA: 11800 kg SKUPNE DIMENZIJE: 5090 x 3270 x 2830 mm OPREMA: TRANSPORTER OSTRUŽKOV; PAPIRNI FILTER; NASTAVLJALEC ORODIJ

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, stružna dolžina: 1.545 mm, premer struženja nad prečnim suportom: 660 mm, izvrtina vretena: 65 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 160 mm, pomik po osi Z: 1.545 mm, Manufacturer: MAZAK Model: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year of manufacture: 2007 Multitasking machining in a single setup Sub spindle with full C-axis capability for part transfer The INTEGREX IV Series is capable of performing all machining processes entirely High-speed milling spindle with swiveling function up to 240° Lower turret with live tooling spindle Chip conveyor with coolant system and 15-bar through-spindle coolant (IKZ) Double power chuck KNCS-N 210-53 (SMW Autoblok) MAZAK Flex-GL150F Gantry Loader Gripping area: 200 × 120 mm (length) / 15 kg Max. turning diameter: 660 mm X-axis travel: 580 mm Y-axis travel: 160 mm Z-axis travel: 1545 mm B-axis: 270° Spindle bore: 65 mm Spindle speed: 5,000 rpm Spindle power: 22 kW Sub spindle speed: 5,000 rpm Sub spindle bar capacity: 65 mm Sub spindle power: 18.5 kW Tool changer: 40 positions B-axis tool mount: Capto C6 B-axis spindle speed: 12,000 rpm Godsx S Hm Iepfx Ahmebn Length: 5,200 mm Width: 2,550 mm Height: 2,600 mm Weight: 14,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, potovalna razdalja osi X: 850 mm, pomik osi Y: 550 mm, pomik po osi Z: 510 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, skupna dolžina: 8.000 mm, skupna širina: 3.325 mm, širina mize: 500 mm, dolžina mize: 600 mm, obremenitev mize: 500 kg, skupna masa: 12.000 kg, moč vretenovega motorja: 11.000 W, 5-Axis Machining Center MAZAK - VARIAXIS J600-5X MACH-ID 9484 Manufacturer: MAZAK Model: VARIAXIS J600-5X Control: MAZATROL Matrix 2 Year of manufacture: 2015 5-axis manufacturing cell with automation, LANG 20 positions Renishaw 3D probe with presetter sphere LANG preparation system with vacuum 25 LANG pallets with vise / clamping device / chuck Only 7,155 operating hours! Original price: 500,000 EUR X-axis travel: 850mm Y-axis travel: 550mm Z-axis travel: 510mm A-axis: -120 to +30° B-axis: -120 to +30° Table length: 600mm Table width: 500mm Table load: 500kg Gbodpfxeyyybho Ahmjn Table diameter: Ø600mm Feed rate X-axis: 30,000mm/min Feed rate Y-axis: 30,000mm/min Feed rate Z-axis: 30,000mm/min Feed rate B-axis: 30°/min Tool holder: 40ISO/BT/MK Spindle power: 11kW Spindle speed: 12,000 rpm Tool changer: 30 positions ICS (internal coolant supply): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant system: Yes Length: 8,000mm Width: 3,325mm Height: 3,060mm Weight: 12,000kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is communicated in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend checking all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 5.217 h, stružna dolžina: 285 mm, izvrtina vretena: 91 mm, potovalna razdalja osi X: 1.000 mm, pomik po osi Z: 285 mm, moč vretenovega motorja: 26.000 W, skupna višina: 2.200 mm, skupna dolžina: 3.200 mm, skupna širina: 2.300 mm, skupna masa: 6.600 kg, CNC stružnica MAZAK - QTN 300-II MACH-ID 9480 Proizvajalec: MAZAK Model: QTN 300-II Krmiljenje: Mazatrol Matrix Nexus Leto izdelave: 2007 Brez konjička Avtomatska vrata Tool Eye (senzor orodja) Transporter za ostružke Max. premer struženja: 830 mm X-os: 1000 mm Z-os: 285 mm Vretenina izvrtina: 91 mm Št. obratov: 5000 obr/min Gbedpfsyyxlfox Ahmjn Moč vretena: 26 kW Delovne ure: 5217 h Dolžina: 3200 mm Širina: 2300 mm Višina: 2200 mm Teža: 6600 kg Prosimo, upoštevajte: Informacije na tej strani so bile pridobljene po našem najboljšem vedenju in po možnosti tudi od proizvajalca. Podatki so posredovani v dobri veri, natančnosti pa ni mogoče popolnoma zagotoviti. Zaradi tega ne predstavljajo jamstva ali pogodbenih pogojev. Priporočamo, da vse pomembne podatke pred nakupom preverite.

Stanje: dober (rabljeno), Manufacturer: MAZAK Model: Integrex 200-4 S Control: MAZATROL MATRIX Year of manufacture: 2010 Specifications Metric US Standard Max. turning diameter: 660 mm X-axis travel: 580 mm Godpfxswpufgj Ahmebn Y-axis travel: 160 mm Z-axis travel: 1,045 mm B-axis: 225° Spindle bore: 82 mm Spindle speed: 5,000 rpm Spindle power: 18.5 kW Sub-spindle speed: 6,000 rpm Sub-spindle bore: 82 mm Sub-spindle power: 18.5 kW Tool changer: 80 positions Driven tool speed: 12,000 rpm Dimensions (approximate) Length: 4,500 mm Width: 2,400 mm Height: 2,900 mm Weight: 9,200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute representation or contractual terms. We recommend verifying all critical details.