Lifepak 300 nakup rabljenega (14.307)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS 300 mit Radmulden
Klic
Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis Low Loader Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
Ncjdpfx Asi Ri Rvebbjl
2 wheel chocks with holders
Aluminum side underrun protection
Rear mudflaps across the entire width
Quarter shell fenders in front of 1st axle
1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess.
2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess.
Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area)
(The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area)
(The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
70 mm timber planks for extension to 3,000 mm
Tie-down points on low loader
1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t
4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps)
7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t
1x at the front in the kink
6x in the loading bed
First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm
Drawbar for turntable trailer
Drawbar with certified 40 mm towing eye
Axles & suspension
SAF drum brake axles
Laser axle/chassis alignment – reduces tire wear and fuel consumption
Parabolic spring suspension with maintenance-free steel-rubber bushings
Wheels and tires
235 / 75 R 17.5
Manufacturer's choice
Steel rims in twin arrangement, factory silver
Braking system
2-line compressed air braking system
Spring-applied parking brake
2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS!
Electrics
24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front
2 white/red lane guidance lights at the rear
2 x 7-pin fail-safe connectors at the front, with connection cable,
1 LED rotating beacon with holder, switched via side light (removable beacon)
2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm
Floor
Front kink with steel/checkered plate covering
Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering
Tail ramp with 70 mm softwood floor
Low loading area including tail ramp: 6,500 mm
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Wood-covered
With spring assist
Operating Instructions
For 10,000 kg axle load an exemption is required, only indivisible loads allowed!
The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS 300 P
Klic
Stanje: novo, številka stroja/vozila: 2dff0c136c85096f36822a0bb, lastna masa: 7.150 kg, največja dovoljena obremenitev: 16.850 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis - Low-bed Trailer
Steel welded construction
Turntable with heavy-duty slewing ring, storage box integrated into turntable front section
Foldable rear supports
2 wheel chocks with holders
Aluminium side underrun protection
Full-width rear mudflaps
Extendable extensions to 3,000 mm (not at the rear bevel)
(Note: The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Central storage compartment for timber boards on the loading platform
70 mm timber boards for extension to 3,000 mm
Low-bed lashing rings
3 pairs of 10 t lashing points integrated into the front floor
6 pairs of 10 t lashing mushrooms recessed in the top and side of the outer frame
1 x by the neck area
The remaining points are distributed at no more than 1200 mm intervals
1 x at the rear bevel
5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (can be converted to 5 t ring lashing eyes, not included)
Drawbar Turntable Trailer Coupling
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum-braked axles
Axles/chassis laser-aligned to reduce tyre wear and fuel consumption
Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical
Axle load equalisation (rocker balancing)
Brake System
2-line compressed air brake system
Coloured line routing for easy service
Spring-loaded parking brake included
2 fail-safe coupling heads at the front, with connecting lines to the tractor unit
ABS and ALB, with ABS plug at the front, with connecting cable
Note: The trailer may only be towed by vehicles ensuring the proper function of ABS!
Wheels and Tyres
235/75 R 17.5
Manufacturer’s choice
Steel twin wheels, factory silver finish
Electrics
24 volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin fail-safe plugs at the front, with connecting cable
1 LED beacon with holder, switched via parking lights (removable beacon)
2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm
Floor
Steel floor in the front section, followed by 70 mm softwood flooring; wheel arch covers in steel/chequer plate
Rear bevel with 70 mm softwood flooring
Low-bed area incl. rear bevel 8,200 mm
Access Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Wood-covered, included
With spring assist
Operating Notes
An exemption permit is required for 10,000 kg axle load—only indivisible loads allowed!
Nsdpfx Aei Riy Eobbocl
The specified total weight is technically achievable, but depending on the load, the permissible total weight may not be reached due to axle/support/kingpin limits. (Poor driving and tracking may result from incorrect load distribution)
Country of Registration/Plates
Country of registration: Germany
With Dekra inspection and appraisal (according to §13 EU-FGV)
24/7 service hotline
Prepared for double-line license plate holder
Contour marking with reflective stripes per ECE R 048, white to the side, red to the rear
Paintwork
Frame DB 7350 Novagrau
10-year guarantee against rust-through
Drawbar galvanized or black, manufacturer's choice
Access ramps hot-dip galvanized
Note: Archive images!
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS 300 P mit Radmulde
Klic
Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information
Chassis Low-loader Trailer
Steel welded construction
1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note!
Frame is 400 mm higher in the main beam area than at the wheel recess.
If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side.
Turntable with robust ball race ring, storage box integrated in the turntable front section
Rear supports foldable
2 wheel chocks with holder
Aluminium side underrun protection
Full-width rear mudflap
Extending wideners to 3,000 mm (not in rear bevel area)
(The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm)
Central storage compartment for wooden planks on loading area
70 mm wooden planks for widening to 3,000 mm
Lashing eyes low-loader
3 pairs of 10 t lashing points integrated in the floor at the front incl.
6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t
1 x at the gooseneck
The remaining distributed between, spacing not greater than 1,200 mm
1 x rear bevel
5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
Drawbar assembly trailer turntable
Drawbar with tested 40 mm towing eye
Axles & Suspension
SAF drum-braked axles
Axles/chassis laser aligned to reduce tyre and fuel wear
Parabolic suspension with maintenance-free steel-rubber bearings
Brake system
2-line compressed air brake system
Colour-coded piping for easy service
Spring loaded parking brake
2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit
ABS and ALB, with ABS plug at the front, with connection cable
Note: The trailer may only be towed by tractor units which ensure the functionality of ABS!
Wheels and tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel rims in twin arrangement, factory silver
Electrics
24 Volt, multi-chamber lights, side yellow LED illumination
2 white position lights at front
2 white/red track marker lights at rear
2 x 7-pin interchange-proof plugs at front with connecting cable
1 LED beacon with bracket, switched via parking light (removable lamp)
2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm
Floor
Front area steel floor, incl.
Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering
Rear bevel with 70 mm softwood floor
Nedpji Ri Ryjfx Abbecl
Low-loader deck incl. rear bevel 8,200 mm
Loading ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Wood-covered
With spring lifting aid
Operating instructions
For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!!
The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution)
Country of registration / Plates
Country of registration: Germany incl.
With Dekra approval and certificate (according to §13 EC - FGV)
24/7 service hotline
Prepared for two-line number pla

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTL 300 Agrar
Klic
Stanje: novo, številka stroja/vozila: b50cac2c60a813b0968994fa0, lastna masa: 5.700 kg, največja dovoljena obremenitev: 18.300 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Nedpfx Abji Ri Agjbocl
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holder
Full-width rear mudflap
Preparation for widening to 3,000 mm (holes in outer frame, not in rear bevel)
Low-loader lashing rings
1 pair of lashing cutouts embedded in the front longitudinal beam at the gooseneck, each rated for 10 t
7 pairs of lashing mushroom pins embedded on top and side of the outer frame, each rated for 10 t
1 x on the front gooseneck
5 x in the low-bed area
1 x in the rear bevel
12 pairs of lashing holes in the outer frame, each rated for 5 t (for lashing strap hooks)
5 x at the gooseneck, 6 x in the low-bed area, and 1 x in the rear bevel
Drawbar system for turntable trailer
Drawbar with certified 40 mm towing eye
Axles & Suspension
Drum brake axles, brand as per manufacturer’s choice
Axles/chassis laser-aligned to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer)
Wheels and Tires
235 / 75 R 17.5 Fulda
Steel rims in twin arrangement, factory silver
Brake System
2-line air brake system
Spring-loaded parking brake
2 unmistakable coupling heads at the front, with connecting lines to the truck,
Connecting lines extended by approx. 60 cm
No ABS, but with mechanical ALB (automatic load-dependent brake valve), thus maximum 60 km/h permit
Electrics
12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors
2 white position lights at the front
2 white/red lane marker lights at the rear
1 x 7-pin 12 Volt plug at the front with connecting cable, extended by approx. 60 cm
1 LED beacon with holder, operated via parking light (lamp removable)
2 pairs of illuminated and extendable warning plates up to 3,000 mm
Floor
Front gooseneck with steel/chequer plate covering
Toolbox recessed in the drive-over slant to gooseneck
Following area with 70 mm softwood floor, wheel arch area with steel/chequer plate covering
Rear bevel with 70 mm softwood floor
Low-bed loading area including rear bevel: 5,900 mm
Loading Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Wooden covering
Spring-assisted lifting
Operating Instructions
For axle loads of 10,000 kg, an exemption permit is required; only indivisible loads permitted!!!
The stated total weight is technically possible; depending on the load, the total weight may not be achievable within the allowable axle/support and fifth wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution)
Country of Registration / Plates
Country of registration: Germany
With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle as agricultural/forestry vehicle (LoF), (for Switzerland, max. 40 km/h possible)
Prepared for double-line license plate holder
No contour markings / reflective tape according to ECE R 048
Painting
Frame: DB 7350 Novagrau
10-year corrosion protection warranty
Drawbar galvanized or black, according to manufacturer’s choice
Loading ramps hot-dip galvanized
Note: Archive images!
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS S 300 Parab/Hydr.
Klic
Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holders
Aluminium side underrun protection
Full-width rear mudflap
Half-shell mudguards on 1st axle with anti-spray mudflaps
Anti-spray mudflaps behind 2nd and 3rd axle
1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock
Extendable width up to 3,000 mm
Central storage compartment for timber planks on loading area
70 mm timber planks for widening to 3,000 mm
Lashing rings for low-bed (40 lashing points)
1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t
4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks)
7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t
1 at the front on the gooseneck
6 in the low-bed section
First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm
5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes)
2 pairs of additional folding lashing eyes, each rated for 10 t
1 on the gooseneck (protruding)
1 recessed behind the last axle
Drawbar coupling for turntable trailer
Drawbar with certified 40 mm towing eye
Axles + Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer)
Wheels and tyres
235/75 R 17.5
Manufacturer's choice
Steel rims in twin configuration, factory silver
Braking system
Ncjdpfxoi Ri Dle Abbsl
2-line pneumatic braking system
Spring-actuated parking brake
2 fail-safe coupling heads at the front, with connecting lines to towing vehicle
ABS and ALB, ABS connector at the front with connecting cable
Brand: Wabco, Knorr or Haldex
Electrics
24 Volt, multi-chamber rear lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marking lights at the rear
2 x 7-pin fail-safe plugs at the front, with connecting cable
1 LED beacon with bracket, controlled via parking lights (removable beacon)
2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm
Floor
Gooseneck front with steel tread plate covering
Storage box recessed in the transition to the gooseneck
Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering
Rear chamfer with 70 mm softwood flooring
Low-bed area incl. rear chamfer: 6,500 mm
Loading ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Timber-layered
Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front
Hydraulic connection with SVK coupling NW 10/3, including connecting hose
Country of registration / Plates
Country of registration: Germany
24/7 service hotline
Prepared for two-line number plate holder
Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear
Warning board according to ECE - 70
Paintwork
Frame hot-dip galvanized incl. passivation
15-year warranty against rust-through
Drawbar galvanized or black, at manufacturer's discretion
Loading ramps hot-dip galvanized
Note: These are archive images!
Odkrijte več rabljenih strojev
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS S 300 Parab/Feder
Klic
Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis Low-Loader Trailer
Steel welded construction
Turntable with robust ball bearing slewing ring
Foldable rear support
2 wheel chocks with holder
Side underrun protection made of aluminium
Full-width rear spray flap
Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle
1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included)
Extendable width up to 3,000 mm
Storage compartment for wooden planks in the centre of the loading area
70 mm wooden planks for extension to 3,000 mm
Tie-down lugs for low loader (40 lashing points)
1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t
4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps)
7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t
1 at the front on the gooseneck
6 in the low bed
Ncjdpfx Aji Ri Ddsbbel
First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included)
2 additional pairs of folding lashing rings, each rated at 10 t
1 on the gooseneck (protruding)
1 behind the last axle, recessed in the floor
Towing Device Turntable Trailer
Drawbar with certified 40 mm towing eye
Axles and Suspension
Drum brake axles, manufacturer’s choice
Axle/chassis laser alignment to reduce tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel rims, twin arrangement, factory silver
Braking System
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit
ABS and ALB, with ABS socket at the front and connecting cable
Manufacturer: Wabco or Knorr
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane lights at the rear
2 x 7-pin non-interchangeable plugs at the front with connecting cable
1 LED beacon with bracket, switched with parking lights (removable beacon)
2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm
Floor
Gooseneck at the front with steel/chequer plate covering
Toolbox recessed into transition slope to gooseneck
Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area
Rear taper with 70 mm softwood floor
Low-loader deck including rear taper: 6,500 mm
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Timber surfaced
With spring lift assistance
Country of Registration / License Plates
Country of registration: Germany
24/7-Service Hotline
Prepared for two-line license plate holder
Contour marking with reflective strips according to ECE R 048, white on sides, red at rear
Warning sign according to ECE-70
Painting
Frame hot-dip galvanized including passivation
15 years’ warranty against corrosion perforation
Drawbar galvanized or black, manufacturer’s choice
Loading ramps hot-dip galvanized
Attention! Archive images shown!
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS 300
Klic
Stanje: novo, številka stroja/vozila: f8fb99947a1c19bc4d63549ff, lastna masa: 6 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Ncodpfx Asi Riwfjbbel
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Rear foldable support
2 wheel chocks with holders
Side underrun protection in aluminium
Full-width rear mudflap
Half-shell mudguards on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles
1 plastic toolbox with shelf, dimensions: width 620 mm, height 360 mm, depth 440 mm, lockable with padlock (padlock not included)
Extendable width up to 3,000 mm (not at rear slope) (track width of machines or vehicles to be transported must not exceed external frame width of 2,550 mm)
Central storage compartment for timber planks on the loading platform
70 mm timber planks for widening to 3,000 mm
Tie-down eyes for low-loader:
1 pair of flush-mounted ring lashing eyes at the front on the swan neck, each rated at 5t
7 pairs of lashing mushroom pins, recessed on top and sides of outer frame, each rated at 10t
1x front on swan neck
6x in low bed area
First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5t ring lashing eyes, not included)
2 additional pairs of foldable lashing eyes, each rated at 10t
1x on swan neck (protruding)
1x behind the last axle, recessed in the floor
Drawbar assembly for turntable trailer:
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axle/chassis laser alignment to reduce tyre wear and fuel consumption
Parabolic springs with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation)
Wheels and Tyres
235/75 R 17.5
Manufacturer's choice, with M&S marking
Steel rims in twin arrangement, factory silver finish
Braking System
2-line compressed air braking system
Spring-actuated parking brake
2 foolproof coupling heads at the front, with connecting lines to the towing vehicle
ABS and ALB, with ABS socket at the front and connecting cable
Brand: Wabco or Knorr
Note: The trailer may only be towed by vehicles that ensure the proper functioning of the ABS!
Electrics
24 Volt, multi-chamber lights, yellow LED side marker lights
2 white position lights at the front
2 white/red lane departure lights at the rear
2x 7-pin foolproof plugs at the front with connecting cable
1 LED beacon with bracket, switched via parking lights (lamp removable)
2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm
Floor
Front swan neck with steel chequer plate covering
Storage box recessed in the approach slope to the swan neck
Then 70 mm softwood flooring, in wheel arch area with steel chequer plate
Rear slope with 70 mm softwood flooring
Low-bed area incl. rear slope 6,500 mm
Loading Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Additional ramp safety device, foldable at the bottom (prevents lateral displacement of ramps, not in combination with laterally hydraulic ramp adjustment)
Wooden covering
Spring-assisted lifting support
Operating Instructions
At 10,000 kg axle load, a special permit is required, only indivisible loads allowed!
The specified total weight is technically possible, but depending on the cargo, the total weight may not be achievable while complying with the permissible axle, support, and king pin loads (poor handling or tracking may result from incorrect load distribution)
Country of Registration / Pla
Mali oglas
Zeithain
590 km
Minibus
Mercedes-BenzV 300 d 4MATIC EDITION AMG Sound Distr. AHK Liege
Klic
Stanje: rabljeno, prevoženi kilometri: 108.250 km, moč: 176 kW (239,29 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 3.200 kg, prva registracija: 11/2020, emisijski razred: Euro 6, energetska učinkovitost: B, barva: siv, vzmetenje: jeklo, gorivo: dizel, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, filter saj, greljenje sedeža, klimatska naprava, navigacijski sistem, parkirni grelec, parkirni senzorji, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, sistem za imobilizacijo, Hill Start Assist (E07), LP3 Interior Lighting Package, Z3N Night Package, Q50 Removable Tow Ball, JP4 Lane Package, JA7 Blind Spot Assist, T56 Electric Operation for Left Sliding Door, T55 Electric Operation for Right Sliding Door, FB4 AMG Rear Spoiler on Tailgate, EY5 Mercedes-Benz Emergency Call System, BS1 Brake Calipers with Mercedes-Benz Lettering, EY6 Breakdown Management, G43 9G-TRONIC Automatic Transmission, CM2 Bumpers and Attachments Painted in Body Colour, FS5 Illuminated Mirrors for Sun Visors, FK4 Radiator Grille Painted Black, FC1 Electronic Key in Chrome Look, JK5 Instrument Cluster with Colour Display, LG2 LED Intelligent Light System, R1U AMG 8 J x 19 Alloy Wheels in Black, LG4 Rear, Brake and Indicator Lights in LED Technology, RK1 Tyres 245/45 R19, LG8 High Beam Assist PLUS, EZ5 Park Package, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 Driver's Seat Lumbar Support, EZ7 Active Park Assist, SE4 Passenger Seat Lumbar Support, QA4 Towing Capacity 2500 kg, CN1 Exterior Sills, M94 Vehicle without EC Speed Limitation, T70 Child Safety Locks on Passenger Doors, ZC6 Sales Code 1, T74 Entry Grab Handle, HH4 Automatic Climate Control THERMOTRONIC, UR1 Seat Rail System with Quick Release, V33 Carpet in Rear, E1E Digital Extra: Hard Disk Navigation, V36 Roof Lining, E1D Digital Radio (DAB), Y10 First Aid Kit, MJ8 ECO Start/Stop Function, E1F 26 cm (10.25") Display Diagonal, IB6 Model Series C447 Vito/V-Class, ES3 12V Sockets for Rear Passenger Rows Right and Left, ES2 12V Socket Cargo/Boot, F3S Exterior Mirrors Painted Black, VD7 Black Headliner, E1T Touchpad, H00 Warm Air Duct to Passenger Compartment, F48 Heating for..... We are available by phone Monday-Friday until 8:00 pm and Saturday until 4:00 pm!!
Njdpoyaykzjfx Abbjcl
More information:
Leasing/financing and trade-in possible!
Errors and prior sale excepted!
All details without guarantee ... more on our homepage
Mali oglas
Krotoszyn
643 km
Emulzifikator/Homogenizator
Karl SchnellB22-300
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Karl Schnell B22-300 Emulgator/Homogenizator
Proizvajalec: Karl Schnell GmbH & Co. KG
Model: B22-300
Tip: 250
Serijska številka: 25342
Leto izdelave: 2012
Napajanje: 400 V, 3 faze, 50 Hz
Tok: 60 A
Moč: 32 kW
Dimenzije: 1500 × 1000 × 2050 mm
Nsdpfxsycl R So Abbjcl
Emulgator/homogenizator Karl Schnell B22-300 je napredni industrijski stroj, namenjen za predelavo živil, zlasti za proizvodnjo emulgiranih produktov in suspenzij z nizko oziroma srednjo viskoznostjo. Naprava združuje funkcije predhodnega drobljenja, mešanja ter emulgiranja v enem tehnološkem ciklu.
Proces drobljenja in homogenizacije poteka preko rezalnega sistema z rotirajočim nožem in zamenljivo perforirano ploščo, kar omogoča enotno konsistenco izdelka in natančno nadzorovano kakovost emulzije.
Mali oglas
Meiningen
596 km
Sušilnik laka DIN 1539 300°C
VötschVTL 100/150 nach DIN 1539
Klic
Leto izdelave: 2001, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, with safety system for solvent-containing substances according to DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and recirculating air filter wall inside the chamber
Completely overhauled, 12 months warranty
- Interior dimensions (W x D x H): 1000 x 1000 x 1500 mm
- Exterior dimensions (W x D x H): 1900 x 1430 x 2315 mm
- Capacity: 1500 liters
- Tmax: 300°C
- Eurotherm controller 2404 (20 programs, each with 16 segments)
- Eurotherm recorder
- Connected load: 29 kW
- 6 mesh shelves included, as well as V2A (stainless steel) support brackets
- Minimum exhaust air volume: 360 m³/h
- Maximum permissible solvent quantity: 36g at nominal temperature 300°C
- With concentration measurement
- Window seals renewed
Ncsdsvcb U Aopfx Abbjl
- Net weight approx. 1200 kg
- Incl. documentation, CE declaration
Inspection in our warehouse possible by appointment.
We offer new and used industrial furnaces. Contact us!
Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial furnace, paint dryer, tempering oven, heating oven, tempering furnace, drying cabinet, chamber furnace, enamelling oven, recirculating air drying cabinet, recirculating air oven, solvent oven
Mali oglas
Karlsbad
574 km
Obdelovalni center - univerzalni
QUASERUX 300/15C
Klic
Stanje: rabljeno, Leto izdelave: 2011, Technical Data:
X-travel: 410 mm
y-travel: 610 mm
z-travel: 500 mm
Spindle speed: 15,000 rpm
Spindle taper: SK 40
Control: iTNC 530 HEIDENHAIN smart NC
Table dimensions: 320 x 320 mm
Table load capacity: 100 kg
Tool changer: 48 positions
Total power requirement: 35 kVA
Machine weight approx.: 7.4 t
Required space approx.: 4.15 x 3.8 x 3.28 m
5-axis simultaneous machining center,
NC rotary swivel table, C-axis 360°, B-axis +30-120°,
Chip conveyor,
Internal coolant supply 20 bar,
3D probing system,
Nodpjwlhvwjfx Abbocl
KinematicsOpt,
electronic handwheel,
Operating hours:
approx. 9,600 h "machine on", approx. 3,500 spindle hours
Mali oglas
Domaszek
387 km
MKLF 300 KOTLIČEK ZA KUHANJE MARMELADE
Maurer GépMKLF 300
Klic
Leto izdelave: 2026, Stanje: novo, Compared to other manufacturers, the mixing unit of this machine is positioned at the bottom of the kettle, which makes lifting the hinged lid much easier. Silicone scrapers inside the kettle help prevent the jam from burning.
Technical Specifications:
• Rated capacity: 300 L per batch
• Power requirement: 24 kW, 400 V, 32 A, 3 phases
• Material: Wnr. 1.4301, AISI 304 stainless steel
• Dimensions: 1200 x 1100 x 1250 mm
Nodsfd Igfjpfx Abbocl
• Weight: 400 kg
• Double-walled: with food-grade glycerin
• IP65 electrical control cabinet
• Automatic temperature control
• Effortless to clean
• Minimal maintenance required
• Connection: DN 100
• Safety valve
Mali oglas
Domaszek
387 km
MPA 300 ELEKTRIČNI PASTERIZATOR
Maurer GépMPA 300
Klic
Leto izdelave: 2026, Stanje: novo, Pasteurization unit with electric heating and tubular heat exchanger. Easy operation with manual flow control and digital display for temperature monitoring. The pasteurizer comes standard with a bag-in-box (for juice or other liquids) filling system.
Technical specifications:
• Rated capacity: 300 L/h (at a filling temperature of 80°C)
• Power requirement: 27 kW, 400 V, 32 A
• Material: Wnr. 1.4301, AISI 304 stainless steel
• Dimensions: 600x1000x1850 mm
• Weight: 115 kg
• IP65 electrical control unit
• Connection: DN 25
• Automatic temperature regulation
• Manual operation
• Easy cleaning with the help of cleaning sponges
• Minimal maintenance
Ncedpsfdz Diofx Abbel
• Adjustable machine feet
Accessories: Manual bag-in-box (BiB) filler with digital scale
Cleaning sponges for maintenance
Optional:
• Bottle filling module with 2-bottle filler for various bottle sizes
• Juice pump for refilling the upper (juice tank) buffer tank
Mali oglas
Domaszek
387 km
MLB 300 ZA RAZKLADANJE VELIKIH ZABOJEV
Maurer GépMLB 300
Klic
Leto izdelave: 2026, Stanje: novo, The two-button safety interlock ensures safe operation of the system. The box tipper is suitable for fruit and vegetable processing using standard large crates. This box tipper is indispensable for the safe, convenient and even filling of washing systems and sorting conveyors. In addition, it is equipped with a sliding gate at the outlet, facilitating the dosing of fruit and vegetables.
Njdpfjffyb Eox Abbecl
Technical data:
- Nominal capacity: 20-25 tips/h
- Maximum crate weight: 300 kg
- Power requirement: 0.55 kW, 400 V, 6 A
- Material: Wnr. 1.4301, AISI 304 stainless steel
- Dimensions: 1290 x 1780 x 1260 mm
- Weight: 300 kg
- IP65 electronic control cabinet
- Adjustable tipping speed
- Hydraulic tipping with “anti-fall” safety system
- Adjustable machine feet
- Sturdy construction
- Automatic hydraulic control
- Suitable for various crate sizes
- Hydraulic tipping with “anti-fall” safety system
- Sliding gate at the outlet
- Adjustable machine feet
Mali oglas
Domaszék
389 km
MK MOBILNA PREDELAVA SADJA
Maurer Gép300
Klic
Leto izdelave: 2026, Stanje: novo, številka stroja/vozila: 1234, Mobile processing unit for fruit and vegetables
Specifications:
- Output: Final product max. 300 L/h
- Throughput capacity: 300 kg/h
- Electrical requirements: 10 kW, 400 V
- Heating capacity: 30 kW
- Fuel: Propane, LPG, natural gas
- Flue gas vent: 60/100 mm concentric chimney
- Material: WNr. 1.4301, AISI 304 stainless steel
- Dimensions: 6100x2200x2800 mm
- Weight: approx. 2.3 tonnes (depending on equipment and options)
- IP65 certified electronics
- Heat exchanger: Soft water
- Connections: DN 25
INSTALLED MACHINES:
- Custom-built washing machine with grinding unit (foldable, tiltable)
- MKSP 300 belt press (automatic)
- MKT 100 juice collection tank with pump (automatic)
- Buffer tank
- MKPAG 300 gas pasteurizer (automatic)
- BB TOP 180 semi-automatic filler or 2-head bottle filler
- Air compressor
Ncedpjiu Hz Hefx Abbol
- High-pressure cleaner
Hot-dip galvanized steel chassis with non-slip aluminium floor and aluminium body. Both sides and the rear can be opened at a 90° angle. The foldable washing unit takes in the produce. After milling and pressing, the automatic juice separator channels the juice into the buffer tanks. The automatic pasteurizer then takes over the heat treatment, and in the final step, the operator fills the finished product into bags or bottles. The machine is highly automated and requires only 2 operators. Very easy to clean and requires minimal maintenance.
Options:
- Diesel generator (10 kW)
- 3.2 tonne trailer
- 300-litre fresh water tank
- 300-litre wastewater tank
- Filtration system
- Canopy/tent system
- Custom graphic design
Mali oglas
St. Gallen
449 km
Ultrazvočni sistem čiščenja
Ultraschallreinigungsanlage PRO300BR-300-PRO
Klic
Stanje: novo, Leto izdelave: 2023, Automate your cleaning process with equipment from the Superior Series: lifting device with support grid for effortless parts handling, filtration systems for dirt separation, exclusive oil separation system (OPS), and intuitive touch panel. Standard models available from 150 L to 8,000 L.
TECHNICAL CHARACTERISTICS
Exterior dimensions of the machine: 2,140 x 1,540 x 1,720 mm
Interior dimensions of the tank: 1,300 x 794 x 670 mm
Ncedpsf E Nt Dofx Abbjl
Usable dimensions of the parts basket: 1,270 x 685 x 470 mm
Maximum load: 400 kg
Worktop height: 980 mm
Tank capacity: 692 L
Ultrasonic generator power: 4,800 W
Ultrasonic operating frequency: 28 kHz
Heating element output: 12 kW
Mali oglas
Merishausen
517 km
Trdnostni preizkuševalnik M5U 300-030
EMCOM5U 300030
Klic
Stanje: dober (rabljeno), Merilnik trdote
Tip: M5U 300-030
Nodpsx U Dprjfx Abbocl
Proizvajalec: emco
Stanje: rabljeno, dobro, brez garancije
Mali oglas
Bremen
890 km
300-litrska posoda iz V2A
8858
Klic
Stanje: rabljeno, kapaciteta rezervoarja: 300 l, SPLOŠNO
Zasnova: pokončno stoječa
Ncsdpfxsyclpzj Abbol
Opombe: Rezervoarji nekoliko nesimetrični (pokrovi se ne prilegajo povsem rezervoarjem; 1x manjka gumb pokrova); Izpust s privijačenim pipo (notranji premer cevi cca 12 mm); Rezervoar 1: 1 priključek je potisnjen v valj; Rezervoar 2: lepljive usedline in kovinske razbarvanosti v notranjosti; 1 udrtina na zgornjem robu ter 1 močnejša praska na valju (glej slike)
Notranji premer: 640 mm
Skupna višina: 1.440 mm
Zgornji pokrov: odprt z prostim pokrovom
Lokacija: Bremen
Volumen: 300 litrov
Material v stiku s produktom: V2A 1.4301 (AISI304)
Stanje: rabljeno
Valjasta višina: 970 mm
REZERVOAR
Oblika podnožja: noge
Število nog: 3 kosi
LASTNOSTI MATERIALA
Zunanji izgled: marmoriran
Material nog: nerjaveče jeklo
Mali oglas
Bremen
890 km
300-litrska mešalna posoda (mešalnik za prah) iz V4A z propelerskim mešalom
9321
Klic
Stanje: rabljeno, kapaciteta rezervoarja: 300 l, SPLOŠNO
Izvedba: viseča
Opombe: Premer pregledne odprtine cca 410 mm; nosilni obroč in zunanja plošča na dnu iz Fe; zunanja stran v sivkastem zaščitnem premazu
Skupna višina: 1.800 mm
Mešalo: propeler
Lokacija: Bremen
Prostornina: 300 litrov
Material v stiku z izdelkom: V4A 1.4401/04 (AISI316)
Stanje: rabljeno
Zadnja uporaba: mešalnik prahu v živilski industriji
POSODA
Oblika podstavka: obroč
OPREMA
Pregledna odprtina / kupola: v zgornjem pokrovu
Izpust: 125 mm
MEŠALO
Postavitev mešala: centralno v zgornjem pokrovu
Oprema mešala: enota motorja/menjalnika ni več na voljo
Nedpfx Ajyck D Djbbocl
Mali oglas
Bremen
890 km
300-litrska premična posoda iz V2A
9502
Klic
Stanje: rabljeno, kapaciteta rezervoarja: 300 l, SPLOŠNO
Oblika: stoječa
Opombe: ena močna udrtina v zgornjem cilindričnem delu ter ena guba na iztočni cevi (glej fotografije)
Notranji premer: 630 mm
Nsdpfeyckqwox Abbocl
Skupna višina: 1.620 mm
Lokacija: Bremen
Prostornina: 300 litrov
Material v stiku z izdelkom: nerjavno jeklo V2A 1.4301 (AISI304)
Stanje: rabljeno
Valjasta višina: 990 mm
Zadnja uporaba: rastlinska zdravila
POSODA
Oblika postavitve: premična na kolesih
Število nog: 4 kosi
OPREMA
Možinska odprtina / Kupola: na zgornjem delu (DN 500)
Izliv: DN32 DIN 11851
LASTNOSTI MATERIALA
Material nog: nerjavno jeklo
Mali oglas
Bremen
890 km
300-litrska tlačna posoda iz V2A
S16632
Klic
Stanje: rabljeno, kapaciteta rezervoarja: 300 l, SPLOŠNO
Izvedba: pokončna
Opombe: Nekateri pokrovi za revizijsko odprtino manjkajo. Kolesa manjkajo. Poseben prirobnik na iztoku, lahko ga prilagodimo na priključek po vaši izbiri, strošek je 474 €. Rezervoar lahko za vas prilagodimo – kontaktirajte nas za ponudbo brez obveznosti.
Zunanji premer: 720 mm
Skupna višina: 1.430 mm
Maks. nadtlak: 1,0 bar
Lokacija: zunanji sklad
Identifikacijska ploščica:
Vakuum: 3,0 bar
Volumen: 300 litrov
Debelina stene valja: 3 mm
Ncjdpfx Aeyckkksbbel
Material v stiku s proizvodom: V2A 1.4301 (AISI304)
Stanje: rabljeno
Višina valja: 650 mm
Zadnja uporaba: farmacija
REZERVOAR
Maks. dov. obratovalna temperatura: 132 °C
Stoječa izvedba: noge
Število nog: 4 kosi
OPREMA
Izpust: 50 mm
TEHNIČNI PODATKI / MERE
Oddaljenost dna od tal: 290 mm
Debelina dna: 5 mm
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Bremen
890 km
300-litrska premična posoda iz V4A
9802
Klic
Stanje: rabljeno, kapaciteta rezervoarja: 300 l, SPLOŠNO
Oblika: stoječa
Opombe: Manjka identifikacijska ploščica: delovni tlak verjetno +3 bara; polnilna cev znotraj posode (glej slike); izpust je rahlo drugačen (glej slike)
Notranji premer: 700 mm
Skupna višina: 1.410 mm
Zgornji pokrov: privit pokrov
Lokacija: Bremen
Nodpjyci Nrjfx Abbscl
Prostornina: 300 litrov
Material v stiku z izdelkom: V4A 1.4571 (AISI316)
Stanje: rabljeno
Cilindrična višina: 620 mm
Zadnja uporaba: farmacija
POSODA
Spodnje dno: Klöpper dno
Oblika postavitve: premična na kolesih
Število nog: 4 kos
OPREMA
Izpust: clamp
Mali oglas
Bremen
890 km
300-litrska premična posoda iz V2A
B0094
Klic
Stanje: rabljeno, kapaciteta rezervoarja: 300 l, SPLOŠNE
Zasnova: pokončna
Opombe: Posoda je zaradi konstrukcije rahlo ovalna; premična na 4 plastičnih kolesih; majhne razlike v izvedbi obeh posod; ena posoda z privijačeno iztočno armaturo (diskasti ventil), ki zmanjša iztok na DN 25 DIN 11851
Notranji premer: 790 mm
Skupna višina: 850 mm
Zgornje dno: odprto z ohlapnim pokrovom
Lokacija: Bremen
Prostornina: 300 litrov
Material v stiku z izdelkom: V2A 1.4301 (AISI304)
Stanje: rabljeno
Cilindrična višina: 590 mm
Zadnja uporaba: kozmetika
Ncjdoyci Dpopfx Abbel
POSODA
Spodnje dno: plosko dno z naklonom
Stanje postavitve: premična na kolesih
OPREMA
Izpust: DN50 DIN 11851
Mali oglas
Krško
45 km
Stroj za predelavo mesa
HENNEKENHPI 300
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HPI 300-7651, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Odlično ohranjen stroj letnik 2022, trifazni priklop, malo rabljen. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp
Ncsdpfx Abex Idu Uebjl
Mali oglas
Bergatreute
441 km
Sekalnik lesa drobilnik sekljalnik
Vecoplan300
Klic
Stanje: dober (rabljeno), Leto izdelave: 1995, Seckalnik s ležečim dovodom preko vibrirnega kanala
Motor 30 kW
maks. vhodna širina 320 mm
maks. vhodna višina 80 mm
z transportnim trakom
Nedpfx Ajxc H Rlebbecl
Olajšamo vam iskanje: "lifepak 300"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Lifepak 300 (14.307)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec











































































































































































