Lasercell 1005 nakup rabljenega (167)

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 2355-2, Offer 24416 Technical Specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2500 x D 2300 mm - Weight (approx.): 1500 kg Kfsdsufw S Rjpfx Ah Aoa - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 90519873, Leto izdelave: 2017, obratovalne ure: 234 h, nosilnost: 1.200 kg, dvižna višina: 2.900 mm, težišče tovora: 600 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 1.900 mm, kapaciteta baterije: 200 Ah, napetost baterije: 24 V, dolžina vilic: 1.150 mm, lastna masa: 1.005 kg, Jungheinrich EJC 112z Visokodvižni viličar z dvojnim stebrom, letnik 2017 Podatki: Jungheinrich EJC 112z Letnik: 2017 Prebrane delovne ure (h): 234 Tip dvigalnega stebra: Dvojni Dvižna višina (mm): 2900 Prosti dvig (mm): 0 Gradbena višina (mm): 1900 Kodpfx Asxltk Deh Aofa Začetni dvig: Da Nosilnost (kg): 1200 Dolžina vilic (mm): 1150 Lastna teža (kg): 1005 Prednje pnevmatike: Poliuretan Zadnje pnevmatike: Poliuretan Letnik baterije: 2017 Kapaciteta baterije (Ah): 200 Napetost baterije (V): 24 Dodatki: Integriran polnilec.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 4.748 h, dvižna višina: 5.000 mm, težišče tovora: 1.200 mm, vrsta goriva: dizel, tip droga: dupleks, gradbena višina: 4.500 mm, proizvajalec motorjev: Volvo, dolžina vilic: 2.000 mm, lastna masa: 41.920 kg, skupna višina: 4.500 mm, Oprema: kabina, STROJ: Viličar ZNAMKA: Kalmar MODEL: DCG 330-12LB LETO: 2017 MOTOR: Diesel, Volvo DELOVNE URE: 4748 MENJALNIK: Avtomatski DVIŽNI STEBER: 2-stopenjski, prosti dvig PRIKLJUČEK: Bočni pomik in nastavljalec vilic NOSILNOST: 33000 kg VIŠINA DVIGA: 5000 mm TRANSPORTNA VIŠINA: 4500 mm Kfedpfxoxp El Io Ah Asa HIDRAVLIČNI VENTILI: 4 VILICE: Da, 2000 mm TIP GUM: Pnevmatske, dobre ID100519

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VF622SVA000100506, prevoženi kilometri: 196.428 km, moč: 230 kW (312,71 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, Leto izdelave: 2004, Tovornjak RENAULT Tip stroja: LKW RENO šasija Proizvajalec: Renault Model: 22SVA1A Številka stroja: VF622SVA000100506 Leto izdelave: 2004 Prevoženi kilometri: 196428 km Motor: 230 kW Stanje: zelo dobro (rabljeno) Lastna teža: 7534 kg Kjdpfx Ahexlg Age Aefa Skupna masa: 26000 kg Lokacija: Röntgenstraße 15, D-33378 Rheda-Wiedenbrück

Stanje: novo, Leto izdelave: 2024, CNC Drilling Machine Kudu with NC Control and Manual Tool Change (3-Axis) Drilling machine with movable processing unit—the table remains stationary, only the drilling head moves. The machine enables both manual and fully automatic operation. After each drilling operation, the processing unit automatically moves to the next drilling position along the X and Y axes. The operation is straightforward, and programming is performed directly at the machine control unit. The system is highly robust and assembled from proven machine components. Technical Data: - Measuring length: 6,000 mm - Total length: 8,000 mm - Stable machine base frame Kjdpfx Ajfu Iwmjh Asfa - Drilling head speed: up to 2,800 rpm - Tool holder: HSK 50 - X, Y and Z-axis driven by servo motors - Rapid traverse in X-axis: 18 m/min - Rapid traverse in Y-axis: 5 m/min - Distance table top to bottom edge of tool holder: 245 mm - Table width: 450 mm - Working height: 1,005 mm - Drilling diameter: 3 to 15 mm in steel 50 (tool dependent) - Y-axis travel: 230 mm - X-axis tolerance: ±0.1 mm/m - Y-axis tolerance: ±0.05 mm - Z-axis tolerance: ±0.05 mm - System weight: 2,000 kg - System dimensions: 8,000 mm x 2,000 mm x 2,388 mm (see layout plan) - Electrical connection: 32 A - Pneumatic connection: 8 bar - Front safety via light barrier - Rear access protection with machine fencing - Simple programming directly on the machine - Cooling via minimum quantity spray system - Without material clamps - Digital handwheel Your Benefits: - Gentle handling of workpiece surfaces - Intuitive, graphical user interface - Machining directly at the workpiece end without difficulty - 50% space saving compared to moving table machines - Chips collected in chip tray - Simplest programming and operation You are welcome to inspect the desired system at our production or demonstration facility at any time. Feel free to contact us to arrange a visit. Plantec Maschinen GmbH

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 499.870 km, moč: 390 kW (530,25 KM), vrsta goriva: dizel, velikost pnevmatike: 385/65 R 22.5, konfiguracija osi: 8x2, barva: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, Leto izdelave: 2018, Oprema: zapora diferenciala, žerjav, Structure Year of manufacture: 2018 Crane Number of hydraulic extensions: 2 Number of stabilizers: 2 Rotator: ✓ Capacity in kilograms: 3,480 kg = Further Information = General Information Year of manufacture: 2018 Cabin: single, sleeper cab License plate: 72-BLR-5 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Driveline Engine brand: DAF Transmission Transmission: 12 gears, automatic Axle Configuration Front axle 1: Tyre size: 385/65 R 22.5; Max. axle load: 9,000 kg; Steering; Tyre tread left: 70%; Tyre tread right: 70% Front axle 2: Tyre size: 385/65 R 22.5; Lift axle; Max. axle load: 8,000 kg; Steering; Tyre tread left: 70%; Tyre tread right: 70%; Brakes: disc brakes; Suspension: air suspension Rear axle 1: Tyre size: 315/80 R22.5; Twin tyres; Differential lock; Max. axle load: 11,500 kg; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80%; Brakes: disc brakes; Suspension: air suspension Rear axle 2: Tyre size: 385/65 R 22.5; Lift axle; Max. axle load: 7,500 kg; Steering; Tyre tread left: 80%; Tyre tread right: 80%; Brakes: disc brakes; Suspension: air suspension Dimensions Dimensions (L x W x H): 1005 x 255 x 385 cm Wheelbase: 560 cm Weights Unladen weight: 14,000 kg Payload: 22,000 kg Gross vehicle weight: 36,000 kg Functional Crane: Palfinger M120 Z 96, year 2018 Body brand: Alu. tipper Tipper: Rear Layout Number of beds: 1 Maintenance APK (Technical Inspection): valid until 02.2026 Condition Technical condition: very good Optical condition: good Number of keys: 2 = Company Information = For more photos, see: Why buy from Thomas Trucks? The choice is easy. Thomas Trucks is one of the world’s independent commercial vehicle trading companies. Here you can choose from a constantly changing inventory of used trucks, tractors, trailers, and semi-trailers. Our range includes all European brands, years of manufacture and price categories. You will always find a good vehicle at the right price! Thomas Trucks always offers: - Competitive prices Kfedjw Eaybjpfx Ah Aoa - Good service - Spacious, fast-changing stock - Reliable quality - Professional business - We speak many languages - Assistance with registration and transport - (Export) license plate arranged quickly - Professional technical services - And more. Visit our website to view our complete range and competitive offers. We are open 6 days a week. Need help with export, import or shipping your vehicle? Contact our sales team. It is also possible to sell your current vehicle to us. We do our best to present the information as accurately as possible; however, no rights can be derived from this data. We can also arrange financing for you in the Netherlands.

Stanje: rabljeno, prevoženi kilometri: 147.412 km, prva registracija: 04/2011, vrsta goriva: dizel, barva: bela, vrsta prenosa: mehanski, število sedežev: 3, dolžina tovornega prostora: 2.000 mm, širina tovornega prostora: 1.290 mm, višina nakladalnega prostora: 1.210 mm, Oprema: ABS, centralno zaklepanje, filter saj, je imel nesrečo, !!!!! MOTOR SE NE ZAŽENE !!!!! POŠKODBA MOTORJA !!!!! 3-sedežni, servo volan, 5-stopenjski ročni menjalnik, električna okna, radio-CD, 3-polni električni priključek, Carrier hladilna enota, zadnja krilna vrata itd. Lastna teža: cca 2000kg. Možne napake, vmesna prodaja in tipkarske napake. Prodaja le podjetjem in za izvoz. !!!! Fg-10051 !!!! Številka ključa 139 !!!!! Ksdpfxjw Sqc Ee Ah Asfa

Stanje: novo, Airflow: 1600 m³/h Kodpfjxaal Rjx Ah Aofa Separation efficiency: 99.9 % Length of extraction hose: 3,000 mm Motor: 230 Volt Motor power: 1.1 kW Weight: 80.0 kg Dimensions (L x W x H): 580 x 580 x 900 mm Description: The newly developed TEKA filtoo filter unit is a mobile filtration system that can be used for a wide range of applications involving the filtration of fumes, dusts, and gases. It is also suitable for high-alloy steels (stainless steel). (The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation rate: > 99.9 %)) Where can the SIG 230 filtoo be used? - At welding workstations - In workshops - For soldering applications - By restorers - In metalworking shops Features: - BGIA-certified extraction and filtration unit IFA 1005030 for extraction on high-alloy steels & non-ferrous metals - Operating manual in German Optional equipment for a surcharge (recommended): - Retrofit kit STAVO (pre-separator for dust) - For FILTOO with spark protection and collection drawer Note: - Unit is only to be used for extracting dry dust/fumes - Read the operating manual before initial start-up

Stanje: rabljeno, Double-column eccentric punching press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feeder Machine No. 88151005 Year of construction 1988 / 92 Pressing force: 160 t Column gap: 970 mm Lateral column gap: 560 mm Table size: 900 x 900 mm Ram area: 900 x 700 mm Die installation height: 560 mm, max. 700 mm Stroke adjustment: 8–160 mm Ram adjustment travel: 125 mm Stroke rate: 25 to 70 strokes/min Strip width in roller feeder: max. 400 mm Motor power: approx. 15 kW Power supply: 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - Ram weight counterbalance cylinder with compressed air - Hydraulic overload protection in ram - Pneumatic clutch-brake combination - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Control cabinets for press and feeder, mounted together on a platform at the side Kfedpfx Ahjdzqlve Aea Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Press width without feeder: 2100 mm Press depth with drive motor: 2300 mm Overall press height: 4150 mm Net weight of press: approx. 18 t For transport, the drive motor is dismantled and the machine is laid on its face. Included: NC roller straightener-feeder ALBA Type GGVHY400 Device Nos. 1405 and 1406, Order No. 910708 (Year of construction 1992) - ALBA PSS 300 feed control - Feed length programmable from 0.1 to 6500 mm per stroke, infinitely adjustable - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive of the feeder hydraulically controlled - Height-adjustable feeder unit on the press to adapt material entry height - Hydraulic power unit standing next to it - Pull-straightening device with hydraulic opening and closing Total weight of the complete system: approx. 24 t Space required for transport: one mega trailer with 3 meters internal height and 13.6 meters loading length Good condition

Stanje: skoraj kot novo (rabljeno), dimenzije dozirnega lijaka 1005x600 mm Kfedpjw Iznkefx Ah Aoa moč motorja 18,5 kW pogon osi s planetnim menjalnikom pnevmatski pritisni predal leto izdelave 2013 dolžina osi 600 mm

Stanje: dober (rabljeno), DONAU DR 40 Z - High-Speed Radial Drilling Machine incl. Tools - Drill spindle mount: MT 4 - Quill diameter: 55 mm - Quill stroke: 220 mm - 18 spindle speeds: 35-1800 rpm - Drilling feeds: 0.075–0.60 mm/rev Kedpew En Slsfx Ah Aefa - Column height adjustment: 450 mm - Drilling radius min/max: 305–1005 mm - Table size: 1200 x 600 mm - Drilling capacity / steel: 40 mm - Drilling capacity / cast iron: 50 mm - Tapping capacity / steel: M33 - Tapping capacity / cast iron: M45 - VARIOUS TOOLS – SEE PHOTOS Dimensions: LxWxH: 1.9 x 2.3 x 2.8 meters / Weight: 1800 kg Errors and omissions excepted.

Stanje: novo, including, among other things, CNC-controlled rip fence mitre fence carriage length 3200 mm F 45 ProDrive: The new F 45 is a masterpiece in technology and design. The newly developed machine base exceeds all previous standards in terms of torsional rigidity and vibration damping. The control unit at eye level allows you to adjust the blade height and tilt, as well as, depending on your chosen control package, the blade speed and further functions. 3.5" colour display with separate keypad Automatic dimension correction at the rip fence and mitre fence when tilting the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last dimension input (back function) 99 storable cutting programmes Grooving: with automatic stepwise positioning of the rip fence 400V / 50Hz – Europe, scale in mm M44249 Machine height 910 mm M64099 Operation at eye level Basic configuration The control panel of the F 45 is mounted at eye level, allowing convenient access to all axes and visibility of all settings. One-hand operation of the swing-away device M64096 max. blade diameter 450 mm Basic configuration The F 45 is equipped with a parallelogram-type guard with two hoods for 90° and mitre cuts. They can be infinitely height-adjusted and self-locking. The large infeed pressure roller allows the guard to automatically adjust to the workpiece thickness. Maximum saw blade diameter is 450 mm, ensuring a max. blade projection of 154 mm. M51100 Motor 5.5 kW (7.5 HP) Single-side tilting saw unit with 5.5 kW (7.5 HP) motor, manually adjustable to 3/4/5000 rpm. Tilting range: 0 – 46°. AKE quick-change system for the main saw blade. The motors provide 20% more torque than standard electric motors with the same power consumption. M24038 Preparation for 2-axis scorer Scorer preparation for subsequent installation of a scorer unit Kfjdevzhdzepfx Ah Aea M41010 Table extension 840 mm Basic configuration Table extension 840 mm, made of a CDF panel with double-sided HPL coating, highly resistant to scratches and impacts. M34204 Double roller carriage with carriage length 3200 mm Altendorf double roller carriage is lockable at any position. The hardened steel double rollers provide absolute accuracy between upper and lower carriage on the hard-chromed round guide bars. The carriage construction features a highly torsion-resistant multi-chamber system. The table surface is anodised. A hard-chromed round bar serves as a guide for the cross-slide and interface for various accessories. M44404 Mitre crosscut fence Mitre crosscut fence, crosscuts up to 3500 mm This Altendorf-patented fence with an integrated length-compensation system enables precise cutting of 90° and mitre angles in a single operation. The swivelling angle can be infinitely adjusted by 49° in both the front and rear fence positions, with readings displayed on a scale. Simply slide the fence rail to the required angle on the scale and set the desired length at the fence stop flap. For crosscut lengths from approx. 1700 mm upwards, ...

Stanje: rabljeno, Leto izdelave: 2007, RA1005 The Gebhardt belt conveyor system is from 2007 and in very good (used) condition. It is equipped with a SEW brand motor. The system can be operated in both ascending and descending modes. The inclination angles can be freely adjusted, and both the upper curve and supports are adaptable. Supports are not included in the scope of delivery but are optionally available. Comprises: 1 x feed belt, 1 x main belt, 1 x curved section Technical Data: Main belt length: 5549 mm (including upper curved section) Belt: lightly structured Feed belt length: 900 mm Belt: smooth Belt height (top edge): H1 lower +650 mm, H2 upper 2,300 mm Height difference: +1650 mm, gradient/incline 19° or 34° Kedpfxsk Aa Ako Ah Asfa For individual, expert advice, simply contact us. You can reach us by phone or email. We will be pleased to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Leto izdelave: 2016, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Pralna linija za HDPE folijo leto izdelave: 2016 0 delovnih ur (nikoli ni delovala) blagovna znamka: NEUE HERBOLD, D-74889 SINSHEIM Kodotuui Dspfx Ah Aofa sestavljena iz: mokri granulator tipa SM 450/600-S5-2 Frikcijska pralna naprava tipa FW 560/3000 transportni vijak Plavajoči rezervoar (ločitev plavajočega in potopljenega) tipa TB 500 mehanski sušilnik tipa TM 1005 Sesalna enota tipa MFT 55/500 Električno krmiljenje

Stanje: rabljeno, Straightening and welding plate, cast steel or cast iron, heavily ribbed Heavy-duty straightening plate Length: 1600 mm Width: 1005 mm Thickness: 280 mm Plate thickness: approx. 85 mm, continuous - Center hole: Ø 245 mm, 400/800 mm Kfodpfx Ahedzqbao Aja - Threaded holes M20, approx. 55 mm deep - Through holes Ø 27 mm Weight: approx. 2.5 tons Good condition Former press table – presumably machined parallel on both sides

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Naprodaj je predpripravni sistem EXILE – komplet: CTS osvetljevalnik in UV LED kabina za ekspozicijo. Naprave iz sredine leta 2022. 1. Computer to Screen – EXILE Spyder II DTS 30″ • Serijska številka: 900 100523/182 • Datum izdelave: 07/2022 • Različica: DTS 30″ • Pin registracija: MHM • V kompletu: 1× Screen Drum • Nova tiskalna glava: 2025 Kedexb Ru Eepfx Ah Aofa 2. Ekspozicijska kabina – EXILE V LUX UV LED Exposure Cabinet • Serijska številka: 450 04560 03/129 • Datum izdelave: 05/2022 3. RIP programska oprema • SCREENMAKER RIP Kit (za Windows)

Stanje: rabljeno, prevoženi kilometri: 308.375 km, moč: 375 kW (509,86 KM), prva registracija: 06/2016, vrsta goriva: dizel, lastna masa: 10.070 kg, največja dovoljena obremenitev: 15.930 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x4, medosna razdalja: 3.900 mm, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: ABS, centralno zaklepanje, dodatne luči, elektronski program stabilnosti (ESP), greljenje sedeža, hidravlika, kabina, klimatska naprava, nadzor oprijema, parkirni grelec, računalnik na krovu, servovolan, tempomat, zapora diferenciala, Vehicle location: Bovenden, StreamSpace, Active Brake Assist, Mercedes PowerShift 3, Large cab, 1x comfort seat, 1x berth, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, electric glass sunroof, auxiliary heating, air horn, ABS (anti-lock braking system), ASR (traction control), constant throttle, tipper hydraulics, differential lock, work lights, beacon, leaf-air suspension, aluminium tank, green environmental badge. Wheelbase: 3900 mm, 8t front axle, rear axle with 300 crown wheel planet gear 13.4t, electronic braking system with ABS and ASR, disc brakes with partial protection front and rear, condensate monitoring for compressed air system, front axle stabiliser, aluminium front underride guard, leather steering wheel, lower comfort bed, ambient lighting, residual heat use, auxiliary hot water heater, construction site filter, additional thermal insulation, electric sliding/lifting glass roof, PSM, communication interface (KOM), illuminated Mercedes star, StreamSpace, comfort locking system, Power driving program, Mercedes PowerShift 3, bi-xenon headlights, daytime running lights, headlight cleaning system, high performance engine brake, gearbox oil cooling, ESP, lane departure warning, attention assist, active brake assist, refrigerator, Comfort Pack Top, rear engine PTO with hydraulic pump ISO 7653D. Gross train weight 80 t. VIN: WDB96442610051038. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted. Kfodpsvhkp Tefx Ah Aja

Stanje: novo, Leto izdelave: 2023, Stock clearance Year of manufacture: 2023 Description: - Grinding unit swivels by handwheel - The machine base made of welded steel ensures high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate gear motor for improved sanding results - Oscillation can be switched on as needed - Graphite-coated sanding shoe for increased belt service life - Height-adjustable sanding table to utilize full belt width - Auxiliary table with extraction ports for sanding radii on the rubber-coated idler roller - Drum sanding attachment with removable worktable - Spring-loaded belt tension automatically compensates for belt length variations - With adjustable stops, ideally suited for veneer sanding - Grooved veneer fence allows overhanging veneer to be trimmed accurately TECHNICAL DATA Dimensions and Weight Length (product): approx. 1,700 mm Width/Depth (product): approx. 1,000 mm Height (product): approx. 1,150 mm Weight (net): approx. 300 kg Drive Performance Oscillation motor output: 0.11 kW Dust Extraction Connection Extraction port diameter: 2 x 100 mm Work Table(s) Table length: 950 mm Table width: 450 mm Kfsdevwfxbjpfx Ah Aoa Table height adjustment: 110 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Grinding Unit Sanding belt length: 2,640 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Grinding unit swivel range: 0 – 45° SCOPE OF DELIVERY 1x sanding belt K100 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Tool kit Mitre fence

Stanje: generalkompletno obnovljen (rabljeno), Water recirculating chiller with refrigeration compressor Manufacturer: DALEX (Deltatherm), Model: LT 4 Cooling capacity: 4,500 W Compressor power: 0.98 kW Pump output: 28 l/min Kfedpfx Aheq Tudgj Aoa Water tank capacity: 90 l Dimensions (W/H/D) in mm: 900 x 1005 x 800

Stanje: novo, Leto izdelave: 2025, Shrink tunnel for shrinking labels onto bottles, cans, or jars. Version without conveyor belt and with detachable frame. The shrink chamber can be installed on existing conveyor lines, making this shrink tunnel ideal for seamless integration into your packaging line. Powerful air blowers ensure smooth shrink-fitting of labels without wrinkling. Kedpev Nlxlefx Ah Aofa – Specifications: Max. product size: Ø 110 x H250mm; Tunnel size: L1500 x W120 x H300mm; Max. output: 200 containers/minute; Power supply: 380V, 14kW; Machine dimensions: L1500 x W1005 x H2100mm; Weight: 300kg. Please note that our new machine prices are often lower than typical used equipment prices. Feel free to contact us and tell us about your packaging application. – We generally have 30–50 different new machines available from stock at short notice. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. – All machines come with a full warranty.

Stanje: dober (rabljeno), Heavy-duty transport rollers, machine skates, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers, steering assembly Kfjdpfx Aewx Hcioh Aea -Machine transport rollers: 4 tank rollers -Load capacity: t -Load height: 110 mm -Plate: 3x Ø 140 mm / 1x width 135 mm -Sale/Price: complete set -Dimensions of transport box: 1005/200/H165 mm -Total weight: 57 kg.

Stanje: novo, Diverse Farb- und Feuchtwalzen für KBA Rapida 142: - Nr. 374.0101.1 Westland Farbauftragwalze, Ø 117 mm, neu (4 Stück) - Nr. 374.0102.1 Westland Farbauftragwalze, Ø 123 mm, neu (2 Stück) - Nr. 374.0201.1 Westland Farbauftragwalze, Ø 129 mm, neu (3 Stück) - Nr. 374.0202.1 Westland Farbauftragwalze, Ø 135 mm, neu (1 Stück) - Nr. 374.0301.2 Westland Farbheberwalze, Ø 117 mm, neu (3 Stück) - Nr. 374.0401.1 Westland Farbreiberwalze, Ø 117 mm, neu (3 Stück) - Nr. 374.0402.1 Westland Farbreiberwalze, Ø 123 mm, neu (4 Stück) - Nr. 374.0501.1 Westland Farbreiberwalze, Ø 129 mm, neu (3 Stück) - Nr. 374.1005.1 Westland Feuchtauftragwalze, Ø 135 mm, neu (5 Stück) - Nr. 374.1199.1 Westland Feuchtdosierwalze, Ø 130 mm, neu (3 Stück) - Nr. 90001067 Ebonit-Reiberwalze, Ø 80 mm, gebraucht (2 Stück) - Nr. 90008616 Ebonit-Reiberwalze, Ø 102,3 mm, gebraucht (1 Stück) - Rilsan-Beschwerwalze, Ø 60 mm, gebraucht (1 Stück) Kfodpfx Ahsv Ebf He Aja

Stanje: novo, Leto izdelave: 2022, Clearance Sale Year of Manufacture: 2022 Description: - Grinding unit can be swiveled via handwheel - Welded steel machine frame ensures high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate gear motor for improved sanding results - Oscillation can be engaged or disengaged as required - Graphite-coated sanding shoe for increased sanding belt service life - Height-adjustable sanding table allows use of the entire belt width - Auxiliary table with extraction ports for sanding radii on the rubber-coated contact roller - Sanding drum device with attachable work table - Spring-loaded belt tension automatically compensates for belt length differences TECHNICAL SPECIFICATIONS Dimensions and Weights Length (product): approx. 1700 mm Width/Depth (product): approx. 1000 mm Height (product): approx. 1150 mm Weight (net): approx. 250 kg Drive performance Oscillation motor power: 0.11 kW Extraction connection Extraction port diameter: 2 x 100 mm Work Table(s) Work table length: 900 mm Work table width: 360 mm Work table height adjustment: 110 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Grinding Unit Sanding belt length: 2580 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Max. sanding height: 150 mm Swiveling range of grinding unit: 0 – 90° SCOPE OF DELIVERY Ksdpfx Aevwfkqsh Aefa 1x sanding belt K100 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Mitre fence

Stanje: novo, Leto izdelave: 2025, Shrink tunnel for shrinking labels onto bottles, cans, or jars. Version without conveyor belt and with removable frame. The shrink chamber can be installed on existing conveyor lines, allowing this shrink tunnel to integrate optimally into your packaging line. Powerful air blowers ensure smooth label shrinking without wrinkling. – Specifications: Max. product size: Ø 140xH350mm; Tunnel size: L1600xW150xH400mm; max. output: 200 containers/minute; Power supply: 380V, 14kW; Dimensions: L1600xW1005xH2100mm; Weight: 350kg. Please note that our new prices are often below the usual used prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30-50 different new machines available immediately from stock. For custom-built machines, our delivery times are very short, starting from about 3 weeks. – All machines are available with a full warranty. Ksdpov Nlxxjfx Ah Asfa

Stanje: novo, Leto izdelave: 2022, Stock clearance Year of manufacture: 2022 Description: - Separate work tables for solid wood and veneer sanding, each manually swivellable by 45° and 35° respectively - Veneer sanding fence adjustable with 0.1 mm precision - Electrically height-adjustable sanding unit - Additional table with suction ports for sanding radii on the rubber-coated contact roller - Sanding sleeve device with attachable work table - Welded steel machine frame ensures high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate gear motor for improved sanding results - Oscillation function can be switched on or off as required - Abrasion-resistant, highly slidable plastic surfaces on the work table - Graphite coating on the sanding platen for extended sanding belt life - Spring-loaded belt tensioning system automatically compensates for belt length differences - Rubber-coated and grooved sanding roller - Convenient operation from both sides via a swivelling control panel above the machine - Centrally positioned mounting for feed unit Technical data: Dimensions and weights: - Length (product): approx. 1820 mm - Width/depth (product): approx. 1050 mm - Height (product): approx. 1470 mm - Weight (net): approx. 400 kg Drive performance: - Oscillation motor power: 0.38 kW Extraction connection: - Extraction nozzle diameter: 150 mm Work tables: - Work table length: 1000 mm - Work table width: 280 mm - Table tilt: 45° / 35° Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz Sanding unit: - Sanding belt length: 2640 mm Kedpfxovwfa Se Ah Ajfa - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 20 mm - Sanding area length: 890 mm - Sanding area width: 150 mm - Maximum sanding height: 150 mm Scope of delivery: 1x Edge sanding machine KSO 150 M F 3 PRO 1x Sanding belt K100 5x Rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Mitre fence