Kot Podporo Band nakup rabljenega (11.975)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Nattheim
457 km
Tračna žaga
HemaSR 600
Pokliči
Stanje: rabljeno, Leto izdelave: 1986, Premer valjev: 600 mm Višina reza: 385 mm Moč motorja: 2,2 kW Nagibna miza Velikost mize: 540 x 600 mm Skupna višina: 2100 mm Teža: cca 260 kg Lokacija skladišča: Nattheim
Bdodpfow D Aybex Ag Eod
Mali oglas
Nattheim
457 km
Tračna žaga
EumacopER 500
Pokliči
Stanje: rabljeno, Leto izdelave: 1992, Premer kolesa: 500 mm, vodilo traku zgoraj in spodaj, nagibna miza. Lokacija skladišča: Nattheim
Bdsdpfsw D Aw Hex Ag Eed
Mali oglas
Nattheim
457 km
Stroj za robne trakove
SüdhofV 20
Pokliči
Stanje: rabljeno, Lokacija skladišča: Sonnefeld
Bodeway Dcepfx Ag Eodd
Mali oglas
Nattheim
457 km
Stroj za lepljenje robov s spajanjem
BrandtKD 88 FQ Optimat
Pokliči
Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim
Bjdpevvkd Tjfx Ag Eedd
Mali oglas
Nattheim
457 km
Stroj za lepljenje robov s spajanjem
Holz-HerContriga 1366
Pokliči
Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366
Edge thickness: 0.4–30 mm (depending on equipment)
Edge height: 51/66 mm (depending on equipment)
Panel thickness: 6–45/60 mm (depending on equipment)
Edge types: Coil and strip material
Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment)
Features:
- Adjustable infeed table in magazine area (max. adjustment range 30 mm)
- Height-adjustable magazine plate for lower edge overhang adjustment
- Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm
- Transport chain including automatic central lubrication
- Motorized, position-controlled bridge height adjustment
- Pneumatic locking roller for processing shortest workpiece intervals
- Extendable workpiece support (extension up to 1600 mm)
- Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units)
- Motorized infeed fence
- Lubrication injector for all joints and pins (including hour counter)
- Central extraction connection (2x Ø 200 mm)
- Integrated chip collection box at machine end (in conjunction with radius scraper unit)
Control PPC 231 - Power PC for efficient setup and changeover
- 15" SVGA touchscreen display
- CF memory card 128 MB
- On-board USB port
- Ethernet network interface
- On-board keyboard connector
- Windows-like user interface
- Plain text and/or graphic information
- Rotatable, tiltable control panel at eye level
- Dust-proof membrane keypad with softkeys (push buttons)
- LED indicator for unit preselection
- Program list with program names and numbers
- Comprehensive program memory
- Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points
- Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment)
- Interval display for shortest workpiece distance
- Integrated distance control; positions controlled globally and/or program-specific
- Comprehensive and complete operating data acquisition
- Service messages in plain text
- Diagnostic system
- Integrated synchro-bus system for high-precision unit control
- Individual management for up to ten users including password protection
- Online maintenance (optional), data exchange with HOLZ-HER service
- Barcode interface (optional)
Bodpfxsvvkfdj Ag Eedd
BASE MACHINE CONTRIGA 1366 - belt bridge
Options and accessories for the base machine:
Spray unit 1856 for entry and exit section:
For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent
For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964)
Jointing cutter unit
Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm)
With two electronically controlled cutter units
- 1 unit counter-rotation
- 1 unit co-rotation
- 5 mm plunge depth
- Static frequency inverter 200 Hz
- Without router tool
- With ProLock quick-change tool holder
Tooling for 1803 (workpiece height up to 60 mm)
Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand
Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system)
Max. chip removal: 2 mm at 60 mm workpiece height
[Text continues]
If you need the rest of the translation or a tailored summary, please let me know.
Odkrijte več rabljenih strojev
Mali oglas
Nattheim
457 km
Stroj za robne trakove
OTTEasymatic
Pokliči
Stanje: rabljeno, Leto izdelave: 2001, Hrúbka hrany: 0,2 - 6 mm
Rozmery obrobku:
- Minimálna šírka: 70 mm
- Minimálna/maximálna výška: 8 / 42 mm
- Minimálna dĺžka pri pásových hranách: 150 mm
Bedpfxevvkfqs Ag Eodd
Posuvná rýchlosť: 12 m/min
Valec na nanášanie lepidla
Rozmery stroja (d x š x v): 3500 x 900 - 1300 x 1250 mm
Hmotnosť: cca 1130 kg
Prípojný výkon: cca 6,0 kW, 400 V, 50 Hz
Vybavenie:
- Dvojité horné pritláčanie s manuálnym nastavením výšky
- Automatický zásobník na rolkové hrany do 800 mm priemeru
- Rýchloohrevná lepiaca vaňa s nanášacím valcom v súhlasnom aj protibežnom smere
- Pneumatické zapínanie a vypínanie všetkých pracovných jednotiek
- Pneumatické kapovacie nožnice pre pásové hrany do 3 mm
- Manuálne nastaviteľné vodiacie pravítko
- Dvojitá kapovacia píla s 2 vysokofrekvenčnými motormi, 0,2 kW, 12 000 ot./min, 2 automatické pozície (0° + 3°)
- Orezávacia/zrovnávacia frézovacia jednotka s 2 vysokofrekvenčnými motormi, 0,43 kW, 12 000 ot./min, obojstranné snímanie, s 2 vysokofrekvenčnými hlavami s otočnými nožmi
- Rádiusová stieracia čepeľ, automatické podávanie
- Plochá stieracia čepeľ, automatické podávanie
Miesto skladovania: Nattheim
Mali oglas
Nattheim
457 km
Stroj za lepljenje robov s spajanjem
Brandto KD 69/2 CF
Pokliči
Stanje: rabljeno, Leto izdelave: 2002, Dolžina stroja: 6240 mm Teža: 2400 kg Priključna moč: 14 kW Premer odsesovanja: 120 / 140 mm Lokacija skladišča: Nattheim
Bedpfevvkfwex Ag Esdd
Mali oglas
Nattheim
457 km
Stroj za lepljenje robov s spajanjem
HebrockAKV 3005 DK - F Airtronic
Pokliči
Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim
Bjdexyiilopfx Ag Eedd
Mali oglas
Nattheim
457 km
Tračna žaga
Centauro800 CO
Pokliči
Stanje: rabljeno, Motor 4,0 kW Premer valja: 800 mm Maksimalna višina reza: 440 mm Maksimalna širina reza: 785 mm Višina mize: 970 mm Dimenzije mize: 1170 x 800 mm Širina rezila: 40 x 7/10 mm Dolžina rezila: 5630 mm Premer odprtine za odsesavanje: 120 mm Dimenzije: 1625 x 940 x 2516 mm Teža: 650 kg Lokacija skladišča: Nattheim
Bjdpfxjwayzbo Ag Eedd
Mali oglas
Nattheim
457 km
Tračna žaga
EumacopER 500
Pokliči
Stanje: rabljeno, Leto izdelave: 1994, Premer kolesa: 500 mm z motorno zavoro. Največja višina reza: 320 mm. Stran stojala: levo zgoraj in spodaj, vodila APPA. Motor: 1,5 kW. Nagibna miza. Transportna naprava. Transportna kolesa z indikatorjem napetosti lista. Dolžina lista: min. 4040 mm, maks. 4140 mm. Lokacija skladišča: Nattheim.
Bjdewl D S Uspfx Ag Esdd
Mali oglas
Nattheim
457 km
Stroj za lepljenje robov oblikovanih kosov
PolymacSingle 89 N
Pokliči
Stanje: rabljeno, Leto izdelave: 1999, Višina roba: 10 - 60 mm Debelina roba: 0,4 - 3 mm Minimalni radij krivulje: 20 mm Hitrost podajanja: 2 - 18 / 4 - 14 m/min. Motor: 5,2 kW Zračni tlak: 6 bar Dimenzije: 900 x 1300 x 1200 mm Teža: pribl. 350 kg
Lokacija skladišča: Nattheim
Bdsdpfx Aeymcrbeg Eod
Mali oglas
Mala Vranjska
400 km
Tračna žaga
KolbeBand saw K330
Pokliči
Stanje: rabljeno, Profesionalna kostna žaga Kolbe K330 je zasnovana za hitro, natančno in varno rezanje svežega in zamrznjenega mesa, kosti ter večjih kosov izdelkov v mesnicah, predelovalnih obratih, supermarketih ter profesionalnih kuhinjah. Ta model je idealna rešitev za uporabnike, ki zahtevajo zmogljivo delovanje, zanesljivo obratovanje in visoko kakovost reza pri vsakodnevni profesionalni uporabi.
Žaga omogoča hitro in enakomerno rezanje zahvaljujoč visoki hitrosti lista 22 m/s, kar zagotavlja učinkovito delo in natančne reze. Primerna je za razrez kosti, trupov, velikih kosov mesa ter zamrznjenih izdelkov.
Model K330 je opremljen s kolesi premera 300 mm in uporablja list dolžine 2490 mm, kar omogoča stabilno delovanje, natančno vodenje lista ter odlične rezultate reza. Največja višina reza je 320 mm, širina reza pa 280 mm.
Konstrukcija je v veliki meri izdelana iz nerjavečega jekla, kar zagotavlja dolgo življenjsko dobo, visoke higienske standarde ter enostavno čiščenje in vzdrževanje. Stabilna industrijska zasnova naredi ta model odlično izbiro za profesionalne uporabnike.
Tehnične specifikacije:
- Tip stroja: kostna žaga
- Proizvajalec: Kolbe
- Model: K330
- Moč: 1,5 kW
- Napetost: 400 V
- Frekvenca: 50 Hz
- Hitrost lista: 22 m/s
Bdedey Izqtspfx Ag Ejd
- Premer koles: 300 mm
- Dolžina lista: 2490 mm
- Največja višina reza: 320 mm
- Največja širina reza: 280 mm
- Material: nerjaveče jeklo
- Uporaba: rezanje kosti, svežega in zamrznjenega mesa
- Področje uporabe: mesnice, predelava mesa, supermarketi, profesionalne kuhinje
- Delovanje: hitro, natančno in zanesljivo
- Vzdrževanje: enostavno in preprosto
Mali oglas
Mala Vranjska
403 km
Tračna žaga
KolbeKolbe
Pokliči
Stanje: rabljeno, Namizni model
Popolnoma nerjavno jekleno ohišje in delovna miza
Nastavljiv napenjalec rezila
Varnostno stikalo pokrova
Varnostna žaga pokrova
Dolžina nastavljiva zahvaljujoč standardnim spojem
Možnost nastavitve debeline reza
Kompaktna konstrukcija, ki ne zahteva vzdrževanja
Dimenzije stroja v cm:
Dolžina: 100
Širina: 90
Višina: 190
Električna moč: 2,5 kW
Bsdpfsiqpguox Ag Eodd
Mali oglas
Weilheim an der Teck
493 km
Tračna žaga
JAESPABS 36 300
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, številka stroja/vozila: 232597, - Operating voltage: 400 V
- Guide bar (hydraulic stroke): 200 mm
- Band tension (hydraulic stroke): 60 mm
Sawing parameters:
- Band speed: 250 – 2000 m/min
Bdodpjv Irpzsfx Ag Esd
Equipment:
- Incl. roller conveyor
- Roller conveyor width: 350 mm
Mali oglas
Nemčija
394 km
Robna lepilka Ott Tornado T/41231
OttTornado T/41231
Pokliči
Stanje: rabljeno, Leto izdelave: 2008, Used machine
Year of manufacture: 2008
Features and technical data:
Bdsdpjyqanbefx Ag Esd
- Round pot glue unit
- with second glue unit for PUR processing
- Feed unit with automatic edge band magazine
- Pressure zone with multiple pressure rollers
- End trimming: two motorized saw units for front/end cap trimming
- Top/bottom milling: two milling units with copying wheels for radius or chamfer work
- Radius scraper: pneumatically controlled, for reworking radii
- Surface scraper: for smoothing the edge surfaces
- Polishing unit: two buffing wheels with motors for final finishing
- Riepe spraying device
- Control: PLC with operator panel
- Replacement of the feed frequency inverter by Ott in 2022
- Feed speed approx. 10–12 m/min
- Workpiece thickness up to 52 mm
- Edge thickness 0.3–12 mm
- Power supply 3x 400 V AC, 50 Hz
- Nominal power 12.7 kW
- Rated current 30.5 A
- Control voltage 24 V DC
- Max. fuse protection 35 A (5x 6 mm² power cable)
Machine dimensions: approx. 6120x840x1385 mm
Machine weight: approx. 3,000 kg
Availability: short term
Location: Röllbach
Mali oglas
Nemčija
394 km
Stroj za oblaganje robov oblikovanih delov
BrandtKTV 51
Pokliči
Stanje: rabljeno, Leto izdelave: 1989, Machine d'occasion
Petite machine pour l'usinage de pièces formées
Traite des matériaux de chant revêtus d'une colle thermofusible, qui est réactivée à l'aide d'air chaud
L'avance de la pièce est automatique par pression contre le rouleau presseur central motorisé, assurant ainsi une réactivation régulière de la colle et une fiabilité de collage
Régulation de température thermostatique avec thermostat à aiguille
Soufflante à air chaud triphasée, sans entretien, pour fonctionnement continu
Déviation automatique du flux d'air
Dispositif de séparation de rouleau actionné pneumatiquement, coupe même les chants de placage et PVC les plus résistants
Bodpfx Agewwxyke Ejdd
Commande par pédale pour l'usinage de pièces formées
Épaisseur de pièce : 10 - 50 mm
Puissance de chauffage : 3 kW
Puissance raccordée : 3,3 kW
Largeur minimale de la pièce : env. 25 mm
Épaisseur des chants : env. 0,5 - 1 mm
Rayon intérieur minimal : env. 25 mm
Avancement : 4 m/min
Pneumatique : 6 bar
Poids : env. 105 kg
Disponibilité : court terme
Emplacement : Röllbach
Mali oglas
Nemčija
394 km
Rob za robove lepilni stroj Holz-Her SPRINT 1329 Premium
Holz-HerSPRINT 1329 Premium
Pokliči
Stanje: rabljeno, Leto izdelave: 2013, Used machine
Year of manufacture: 2013
Features and Technical Specifications:
- Machine fully overhauled:
- new Glue Jet 301 glue system (upper part 1 mm)
- all units checked
- all cutters sharpened
- all knives replaced
- Feed speed: 10 - 18 m/min
- Workpiece length: min. 160 mm
- Workpiece width: min. 60 mm
- Workpiece thickness: 8 - 60 mm
- Edge thickness: 0.4 - 8 mm
- Electrical supply for variable feed: 400 V / 50 Hz, 2.2 kW
- Motorized pressure bridge adjustment
- Automatic chain lubrication
- PPC 315 controller with 15" touchscreen
Bedjwka Iiepfx Ag Ejdd
- ECO MODE energy-saving function
- Infeed fence 1350 mm, motorized adjustment
- Jointing milling unit 1802:
- 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for jointing the panel edge
- Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit
- Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit
- Edge feeder 1901 fully automatic
- Glue application station Glu Jet GJ301 automatic:
- 2.3 kW, 50 Hz
- Granulate storage hopper
- Pressure section 1913 MOT
- End trimming unit 1918 (60 mm) pneumatic
- Multifunction milling unit 1826 MOT4 (2 x 0.65 kW):
- Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation
- Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation
- Profile milling unit 1833 MOT4:
- Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM-technology
- Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM-technology
- Scraper unit 1929 MOT2:
- HW reversible carbide inserts for scraper holder R = 2.5 mm (2 pcs. required)
- Flat scraper 1964
- Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm)
Availability: short-term
Location: 63934 Röllbach
Mali oglas
Nemčija
394 km
Stroj za robne trakove
Holz-HerSprint 1317-2
Pokliči
Stanje: rabljeno, Leto izdelave: 2008, Used machine
Year of manufacture: 2008
Control: Edge Control with 18.5" touchscreen color display (16:9),
swiveling control panel,
program memory,
motorized pressure beam adjustment,
feed via transport chain,
feed speed 8-18 m/min,
extendable workpiece support,
motorized adjustable infeed fence
gluing unit 1961,
diamond jointing cutters for both climb and conventional milling,
automatic adjustment to workpiece height
Edge feeder 1903
Pre-cutting up to 3 x 45 mm (material-dependent)
Adhesive application system 1905 Multi-System
automatic glue height adjustment with sensing nozzle,
pressure regulator for cartridge press-on pressure control,
use of PUR adhesives possible,
Pressure section 1913 MOT,
1st roller driven
End trimming unit 1918 with pneumatic adjustment
End trimming saw pneumatically tiltable,
Multifunctional unit 1824 MOT 4
with multifunction cutter for radii 1,2,3 mm
Corner rounding unit 1832
corner rounding function up to 3 mm edge thickness
Radius scraper 1929 MOT 2
with motorized adjustment of horizontal tracing rollers
with pneumatic adjustment (separate for top and bottom)
Chip collection box for radius scraper,
Surface scraper 1964
for cleaning off glue residue for a clean glue joint
with extraction hoods
Spray system 1856 for infeed and outfeed zones
Buffing unit 1940
for re-polishing and edge finishing
----- Technical Data -----
Edge thickness for coil material: 3 mm,
Edge thickness for strip material: 8 mm,
Max. edge thickness for corner rounding: 3 mm,
Workpiece thickness: 45 mm,
Workpiece thickness for corner rounding: 45 mm,
Min. workpiece length: 180 mm,
Feed speed: 8-18 m/min,
Workpiece support clearance: 470 mm,
Support plate diameter for edge material: 800 mm,
End trimming blade for coil material up to: 3 mm,
Heating-up time: 3.5 min,
Jointing cutter power: 2 x 2 kW,
End trimming saw power: 2 x 0.22 kW,
Milling station power: 2 x 0.35 kW,
Corner rounding power: 0.22 kW,
Extraction port jointing unit: 120 mm,
Extraction port milling unit: 70 mm,
Extraction port scraping unit: 70 mm,
Overall length: 5,350 mm,
Bedpfx Aov Sv Eneg Ejdd
Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm
Picture of operating hours comes from a 2022 snapshot
Availability: short term
Location: Röllbach
Mali oglas
Nemčija
394 km
Stroj za robne trakove
Holz-HerSprint 1317-1
Pokliči
Stanje: rabljeno, Leto izdelave: 2003, Used machine
Year of manufacture: 2003
Equipment and Technical Data:
- Control unit with LCD display
- Swiveling control panel
- Program memory
- Manual pressure beam adjustment
- Feed via transport chain
- Extendable workpiece support
Jointing unit 1961:
- 2 x 2.0 kW
- Diamond joint cutters, both climb and counter-rotation
Edge magazine 1903:
- Support disc 820 mm, max. loading capacity 40 mm
- Automatic feeding of roll and strip material
Glue application system 1906:
- Cartridge system with sensing nozzle
- Automatic reloading
- PUR adhesives can be used
Pressure unit 1816:
- With driven roller
- Pneumatic control of pressing system
End trimming unit 1918:
- 2 x 0.22 kW
- Swivels from 0 to 10°, pneumatically adjustable
Milling unit 1942 MOT 2:
- For flush, radius, and chamfer milling
- Motorized adjustment
- Air nozzle at milling unit
Corner copying unit 1832:
- Corner copying up to r = 3 mm, postforming up to r = 6 mm
Radius scraper unit 1929 MOT 2:
- Plastic edges up to 3 mm
- Chip collection box for radius scraper
Surface scraper 1964:
- Application-controlled surface scraper
- Air nozzle at surface scraper
Buffing unit 1940
Edge thickness roll material: 3 mm
Edge thickness strip material: 5 mm
Max. edge thickness for corner copying: 3 mm
Workpiece thickness: 6-45 mm
Workpiece thickness for corner copying: 45 mm
Min. workpiece length: 180 mm
Feed speed: 8 m/min
Bjdpfx Aswka Nyeg Eodd
Distance to workpiece support: 470 mm
Support disc Ø for edge material: 800 mm
End trimming knives for rolls up to: 3 mm
Heating time: 3.5 min
Joint cutter power: 2 x 2 kW
End trim saw power: 2 x 0.22 kW
Milling station power: 2 x 0.6 kW
Corner copying power: 0.22 kW
Extraction connection jointing unit: 120 mm
Extraction connection milling unit: 70 mm
Extraction connection scraper unit: 70 mm
Dimensions: 5,350 x 1,669 x 1,940 mm
Weight: 1,200 kg
Location: Röllbach
Availability: short notice
Mali oglas
Nemčija
394 km
Stroj za robne trakove
OttAtlantic
Pokliči
Stanje: rabljeno, Leto izdelave: 1995, Used machine
Year of manufacture: 1995
Features and technical data:
Bedpowpm Igsfx Ag Esdd
- Glue pot with glue roller
- Pre-cutting knife
- 4 pressure rollers
- 2-motor end trimming unit
- Radius milling unit
- Flush trimming unit
- Radius scraper
Edge thickness: 0.2 - 6 mm
Minimum workpiece width: 70 mm
Workpiece height: 8-42 mm
Feed speed: 12 m/min
Shipping dimensions: 370 x 100 x 125 cm
Weight: 1330 kg
Location: Röllbach
Availability: short notice
Mali oglas
Nemčija
394 km
Stroj za robne trakove
HartmannHM 585
Pokliči
Stanje: rabljeno, Leto izdelave: 1996, Used machine
Bdodjkwg Tbopfx Ag Esd
Year of manufacture: 1996
with heated infeed rail
Gluing station with electronic temperature control and synchronous/counter-rotation function
- End trimming unit
- Milling unit
- Profile scraper
- Buffing station
- Edge thickness: 0.4 - 5 mm
- Panel thickness: up to 50 mm
- Minimum part length: 150 mm
- Minimum part width: 60 mm
- Workpiece thickness: 8 - 50 mm
- Feed rate: 12 m/min
Dimensions (L x W x H): approx. 4000 x 1260 x 1600 mm
(Width can be reduced to 800 mm for shipping by removing the extendable support)
Availability: by arrangement
Location: Hochheim
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Nemčija
394 km
Rob za lepljenje robov Holz-Her Perfect 1424
Holz-HerPerfect 1424
Pokliči
Stanje: rabljeno, Leto izdelave: 1990, Rabljeni stroj
Leto izdelave: 1990
Oprema in tehnični podatki:
- Avtomatski dovod robnega traku
- Lepilni sistem s kartušo
- Pritiskalni agregat s 4 valji
- Enota za čelno žaganje
- Enota za rezkanje poravnave
- Kombinirana enota za poravnano/posneto/radijsko rezkanje
- Radijski strgalnik
- Polirni agregat
- Debelina robnega traku 0,3 - 20 mm
- Največja višina robnega traku 66 mm
- Najmanjša dolžina robnega traku 200 mm
- Podajalna hitrost 8/16 ali 12/24 m/min
Bdodpfeyncpvsx Ag Eod
Razpoložljivost: takoj
Skladišče: 63934 Röllbach
Mali oglas
Concordia Sagittaria
174 km
Stroj za tračno žaganje
MaccSPECIAL 411 CSO
Pokliči
Stanje: novo, Bandsaw with gravity descent MACC SPECIAL 411 CSO
New CE
The machine’s fundamental features (blade support rigidity, flywheel sizing, blade guides, blade tensioning) have been thoroughly studied to prevent blade fatigue, increase longevity, and improve cut straightness and speed.
– Bandsaw with gravity descent motion of the saw bow controlled by a hydraulic circuit, manual bar feed and vise closing, manual head return
– Vertical pivot rotation on play-free, adjustable taper roller bearings
– Blade drive with two-speed motor and special gearbox with bronze gear and hardened, ground worm screw
– Properly sized flywheels
– Robust blade guides made with sealed guide bearings and adjustable carbide wear plates
– Blade tensioning achieved via electromechanical device with micro-switch blade rotation control
– Vise with rapid approach device
– Safety devices on the blade cover, control handle, and blade
– Hydraulic cylinder for controlled descent
– Cutting thickness: 1.2 mm
– Cutting range: 45° left, 60° right
– Adjustable stop for identical-length cuts
– 24V low-voltage electrical system
– 0.06 kW electric coolant pump for blade cooling
– Base equipped with chip collecting drawer and removable coolant tray
– Machine prepared for pallet truck handling
Bsdeficb Topfx Ag Eedd
Mali oglas
Concordia Sagittaria
174 km
Samodejno tračne žage
Macc391/A
Pokliči
Stanje: novo, Hydraulic CNC automatic bandsaw for cuts from 0° to 60° to the right, compliant with all CE safety regulations.
The machine features 9 programs, each consisting of 99 steps, for a total of approximately 890 cutting positions with a corresponding piece counter.
Operation: Material feed advance.
Fixed vise closure.
Blade rotation and delivery of emulsifiable coolant, descent of the saw bow until cut completion, and return of the feed carriage to the preset dimension.
Return of saw bow, stopping of blade rotation and coolant delivery.
Opening of fixed vise.
Cycle repetition.
Step-by-step feed with ball screw drive.
Numerical control of quantity and cutting length.
Hydraulic unit with adjustable cutting pressure.
Bodpsg Np Dxsfx Ag Ejdd
Blade tensioning through manual handwheel rotation and secured by an electromechanical device.
Blade-cleaning brush device.
Bimetallic blade 3010 x 27 x 0.9 mm.
Hydraulic unit motor 0.75 kW.
Cutting thickness 1.2 mm.
Material feed stroke 600 mm.
Electropump 0.09 kW.
Mali oglas
Concordia Sagittaria
174 km
Stroj za tračno žaganje THREE-PHASE
NEBESTM 275
Pokliči
Stanje: novo, NEBES TM 275 Bandsaw – 400 V Three Phase, NEW “CE”
- INDUCTION motor
- Cast iron frame
Bodpfx Aoh Nm Ncjg Esdd
- Adjustable cutting angle from 0° to 60°
- Entire structure made of cast iron
- Electric pump for blade lubrication and cooling
- Oil-bath blade tension gauge
- Front controls and two cutting speeds
- Coolant pump bypass switch
- Blade guide with hard metal (H.M.) pads
Cutting capacities:
- Round at 0°: 220 mm
- Square at 0°: 200 x 200 mm
- Flat at 0°: 230 x 185 mm
- Round at 45°: 150 mm
- Square at 45°: 150 x 150 mm
- Flat at 45°: 150 x 200 mm
- Round at 60°: 90 mm
- Square at 60°: 90 x 90 mm
- Flat at 60°: 90 x 120 mm
- Power: 1.3 HP
- Voltage: 400 V
- Blade size: 2450 x 27 x 0.90 mm
- Weight: 265 kg
Olajšamo vam iskanje: "kot podporo band"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.




































































































































































