Koemag Moči Zalotiti-Ne Sveže Gredi Črpalke nakup rabljenega (144.403)

Stanje: skoraj kot novo (rabljeno), Woma 150Z P16 2000 bar at 20 l/min at 1800 rpm Hnjdsd Hny Aspfx Ah Dju

Stanje: rabljeno, Leto izdelave: 1981, Workpiece length: 1500 mm Stroke: 0 mm Swing diameter: 500 mm Total power requirement: 30 kW Machine weight: approx. 8 t Space requirement: approx. [not specified] NAGEL Crankshaft Superfinishing Machine Model: UF 16 – 150 K 86 S Year of manufacture: Unknown (according to electrical diagram 05/81) Workpiece diameter min./max.: 80 – 160 mm Workpiece swing diameter: approx. 500 mm Workpiece clamping length: approx. 1,500 mm Workpiece speed steplessly adjustable (hydraulic motor) Number of superfinishing units: 14 Band guide diameter max.: approx. 200 mm Total drive: approx. 30 kW, 400 V, 50 Hz Weight: approx. 8,000 kg Equipped with: - 14 belt feeds on a rotary axis, longitudinally adjustable, partially with belt guides and rear-mounted belt pulling device with lead screw. Used belt material is collected at the rear of the machine. - Hydraulically/mechanically operated workpiece feed with lifting device for positioning the part into the center supports; after processing, the part is lifted out again. Hnjdpfxst Hwpmo Ah Dou - Workpiece drive via left center support with hydraulic motor; the workpiece is clamped between hydraulic tailstocks on the left and right. - Separate control cabinet, separate hydraulic unit with two large pumps, coolant/oil system, etc. Condition: Satisfactory to good (was previously in use at VOLVO) – currently not under power. Ideal machine for overhaul/modernization, etc. Payment: Net upon receipt of invoice. Delivery: Immediate from stock possible. We have approx. 100 further grinding machines in stock; please inquire with us.

Stanje: rabljeno, Leto izdelave: 2015, Workpiece length: 100 mm Swing diameter: 80 mm Number of spindles: 2 Control system: FANUC 31i-B5 Workpiece weight: 2.00 kg Centre height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Max. grinding wheel width: 20 mm Max. peripheral speed: 125 m/sec Steady rest passage: 45 - 60 mm Total connected load: 75.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Cam grinding machine for cam components. Equipped with FANUC 31i-B5 control for non-cylindrical grinding; loading gantry; CO2 extinguishing system; suitable for CBN grinding wheels; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock version 12 (two grinding spindles independently movable). Hnjdpfx Aswuuwmjh Deu

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well-designed principle with powerful impact. HIGH-PRESSURE PUMP HT SERVO-JET4000 Hnsdpfxsu Hz Tqo Ah Dsu A well-designed principle with powerful impact. + Up to 40% energy savings compared to conventional systems, eligible for investment subsidies + High energy efficiency: servo direct drive, no reactive power, low and flexible power consumption + Low connection power required: no power consumption when the waterjet system is idle, suitable for operations with limited energy supply + 3-piston plunger pump: high flow rate and efficiency of up to 98%, replaces 6000 bar technology, extended maintenance intervals, simple design, no hydraulic system, no warm-up or ramp-up phase – ready to operate immediately + Continuous pressure regulation and integrated pulsation damping: continual adjustment of cutting pressure to the target value – no pressure fluctuations, higher cutting speed compared to pressure intensifiers in equivalent configurations + Lowest noise level at 75 dB: premium complete system with soundproof enclosure + Universally applicable to all waterjet cutting machines and brands

Stanje: rabljeno, Leto izdelave: 1971, Funkcionalnost: popolnoma funkcionalen, Maximale Länge: 750 mm Hnedjwmcvuspfx Ah Deu

Stanje: rabljeno, Centrifugal pumps for conveying liquids. The liquid enters the housing through the suction flange. The impeller generates a vacuum at the center of the suction line, as the medium is pushed to the edge of the housing by centrifugal force. Here, the increased pressure causes the liquid to rise and leave the housing through the discharge flange. Used centrifugal pumps from various manufacturers, featuring different performance specifications and configurations. Both mobile and stationary centrifugal pumps are available. Capacity: 15 - 1080 hl/h Hedpfxsvcqyuo Ah Djnu Delivery head: 5 - 140 m Power factor: cos ϕ Speed: 14 rpm - 2930 rpm Power: kW Voltage: 22 V Current: 3 - 43 A Frequency: 5 Hz Top specifications: Capacity: 1080 hl/h Delivery head: 140 m Speed: 2930 rpm Power factor: 0 cos ϕ Power: kW Current: 3 - 43 A Voltage: 22 V Frequency: 5 Hz

Leto izdelave: 2007, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: A7.01077.0336, Hammelmann električno pogonjena visokotlačna enota Hnedpfx Ahedt Uyuj Dju 950 bar, 38 l/min 400 V, 50 Hz Kompletna enota v novem stanju brez krmilnikov in zaganjača motorja

Leto izdelave: 1996, Stanje: rabljeno, Description to follow! Hjdpfx Aswqrxaoh Donu

Stanje: novo, Die Auswuchtmaschine 9D715US ist für das Auswuchten von Kurbelwellen verschiedenster Bauarten konzipiert, einschließlich Kurbelwellen von V6-, V8-, V10- und V12-Motoren, bei denen die Auswuchtgewichte an den Pleuellagern angebracht werden: - Auswuchten von Kurbelwellen jeder Bauart - Wellengewicht bis zu 300 kg - Wellenlänge bis zu 1.400 mm - Bohrmodul zur Unwuchtkorrektur Die Konstruktion der Maschine ermöglicht das Auswuchten der Kurbelwelle sowohl einzeln als auch komplett mit Schwungrad und Kupplung – das garantiert minimale Unwucht im Motorbetrieb. MASCHINEN-HIGHLIGHTS • Hart gelagerte Aufnahmesysteme – sicherer Betrieb mit hoher Anfangsunwucht bei niedrigen Drehzahlen. • Rollenkassetten mit großdimensionierten Kugelrollen gewährleisten die erforderliche Genauigkeit beim Auswuchten schwerer Wellen. • Austauschbare, reibungsarme prismatische V-Blöcke erlauben das Auswuchten von Kurbelwellen mit geringerer Masse oder speziellen Lagersitzen. • Die schmalen Ständer ermöglichen das Auswuchten von Kurbelwellen mit komplexer Geometrie und „schmalen“ Lagersitzen. Die 9D715US Maschine verfügt über eine Kassettenbreite von nur 27 mm – Bestwert in ihrer Klasse. • Für das Auswuchten von V-förmigen Kurbelwellen kann die Maschine mit Gegengewichten (variabel) ausgestattet werden, um das Gewicht der Pleuel zu simulieren. • Das vertikale Bohrmodul auf eigenen Führungen ermöglicht die Korrektur der Unwucht direkt an den Gegengewichten der Kurbelwelle auf der Maschine. • Der Frequenzumrichter-Antrieb sorgt für weiches An- und Auslaufen des Elektromotors sowie eine stufenlose Drehzahlregelung des Rotors. MESSEN UND STEUERN Hjdpfx Aowk Ittjh Denu • Wir erleichtern das Auswuchten – der Hauptvorteil unserer Auswuchtsysteme. • Der Auswuchtvorgang wird in Echtzeit auf dem Bildschirm angezeigt und das Laufverhalten der Unwucht überwacht, um das bestmögliche Ergebnis zu erzielen. • Das Messsystem für das Auswuchten bietet zusätzliche, für Kurbelwellen wichtige Funktionen: - Rechnet die Unwuchtmasse unter Berücksichtigung des Bohrdurchmessers und der zulässigen Bohrtiefe in die Bohrtiefe um. - Die Unwucht wird auf mehrere Korrekturebenen umgerechnet, sodass die Korrektur auch auf benachbarten Gegengewichten der Kurbelwelle erfolgen kann. TECHNISCHE DATEN Auswuchtbare Rotorgewichte: 3 – 300 kg Maximaler Rotordurchmesser (über Auflage): 1.100 mm Durchmesser der Lagerstellen: 20 – 140 mm Abstand zwischen Lagerstellen: 150 – 1.350 mm Lagertyp: Rollen / V-Blöcke Antriebselement: Riemen Minimal erreichbare Restunwucht: 0,4 g∙mm/kg Drehzahlbereich: 300 – 1.500 U/min Motorleistung: 2,2 kW Netzspannung: 380V, 3 Phasen, 50Hz Mit Auswuchtmaschinen der VTM Group erledigen Sie Ihre Arbeiten präzise, erhalten positives Kundenfeedback und gewinnen mehr Kundschaft. Benötigen Sie eine Maschine für andere Traglasten, Durchmesser oder Längen? Wir fertigen Auswuchtmaschinen für jeden Bedarf. Kontaktieren Sie uns für ein individuelles Angebot! 👇

Stanje: dober (rabljeno), Leto izdelave: 1996, Fuel level indicator, oil feeder, oil dispensing system, oil station, fuel dispenser, tank data acquisition, tank system display, oil cabinet, fresh oil pump - Manufacturer: Tecalemit, electric pump for fresh oil - Model: 1.54 80 01.4 - Flow rate: 1 to 10 l/min - Motor: Hanning 0.55 kW - Pressure vessel: capacity 2.8 liters - Individual components: see photos Hnodpfsw A Nddox Ah Dsu - Quantity: 2x oil cabinets available - Price: per unit - Dimensions: 500/480/H250 mm - Weight: 19 kg/unit

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Description Spindle headstock and tailstock manually adjustable. Ideally suited for machining a single crankshaft type with varying strokes. Workpiece Center distance between outer main bearings, max.: 920 mm Roll arm length, max. (½ stroke + counterweight radius): 195 – 270 mm Max. number of machinable bearings: 8 main bearings, 6 crank pins Main bearing diameter, min / max.: 30 / 88 mm Crankpin diameter, min / max.: 30 / 84 mm Hjdpfxjwm Elfs Ah Donu Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Minimum bearing spacing: 29.5 mm Roller Burnishing Units Maximum roller burnishing force: 30,000 N Spindle Headstock Main drive motor power: 20 kW Speed during burnishing: 120 rpm / 60 rpm Speed during straightening: 30 rpm Machine Weight including auxiliary units: approx. 13,800 kg Dimensions including integrated control cabinet and hydraulics (L/W/H) approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm

Stanje: generalkompletno obnovljen (rabljeno), Various Almatec pumps, available in plastic and stainless steel versions, all sizes of the AH series, completely overhauled and available at short notice. Hodpjfcy A Hofx Ah Denu

Leto izdelave: 2010, Stanje: kot nova (razstavni stroj), Woma 1002 P35 High-pressure pump in like-new condition 300 bar – 84 l/min – 1500 rpm Hedpfxef Dybzs Ah Denu 300 bar – 101 l/min – 1800 rpm

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 29 kg, obratovalni tlak: 300 letvica, največja hitrost vrtenja: 4.000 obr/min, vrsta zaščite (IP koda): IP55, Nov, visokozmogljiv hidravlični črpalka Sauer Danfoss 11028185 – robustna in zmogljiva hidravlična komponenta, zasnovana za uporabo v industrijskih in mobilnih strojih. 🔹 Modelna oznaka: JRR045BLS192 🔹 Serijska št.: S074826737 🔹 Najvišji tlak: do 350 bar (preverite v tehničnih podatkih) 🔹 Država izdelave: Slovaška 🔹 Namenjeno za: težko mehanizacijo, gradbene stroje in hidravlične sisteme 🔹 Model/Ident. št.: 11028185 📦 Stanje: rabljeno | 📍 Takojšnja dobava Hedpfxjv D H Eve Ah Donu Neto teža: 29 kg Proizvajalec: Sauer Danfoss Na zalogi: 2 kos

Stanje: rabljeno, Leto izdelave: 2014, Workpiece length: 100 mm Swing diameter: 80 mm Number of spindles: 2 Control system: FANUC 31i-B5 Workpiece weight: 2.00 kg Centre height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Max. grinding wheel width: 20 mm Max. peripheral speed: 125 m/sec Steady rest passage: 45 - 60 mm Total connected load: 75.00 kW Hnedpfx Aovx Uvfoh Dou Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Cam grinding machine for cam components. Equipped with FANUC 31i-B5 control for non-cylindrical grinding; loading gantry; CO2 extinguishing system; suitable for CBN grinding wheels; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock version 12 (two grinding spindles independently movable).

Leto izdelave: 1993, Stanje: rabljeno, Material: Standard steel Drive motor: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Hnedpfx Asgb D Hish Dsu Delivery rate: 14.5 m³/h Max. operating pressure: 100 bar Technical documentation: No Note: Piston diameter: 57 mm, Strokes: 326 1/min, Stroke length: 105 mm

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 17.529 h, stružna dolžina: 500 mm, moč vretenovega motorja: 30.000 W, General Information Year of manufacture: 2017 Operating hours: 17,529 Control system: SINUMERIK 840D sl Maximum Workpiece Dimensions Workpiece length up to: 500 mm Maximum swing diameter: 200 mm Stroke above center: 25 mm Maximum clamping diameter: 100 mm Journal diameter: 30 – 60 mm Working Area Longitudinal travel (Z-axis): 602 mm Longitudinal travel (Z-/W-axis): 602 / 602 mm Cross travel (X-axis): 140 mm Cross travel (X-/U-axis): 140 mm Steady rest Z3-axis: dependent on chuck Workpiece (C21-/C22-axis): 360° Tooling Hnedpfxjwgnigj Ah Deu Outer diameter: 230 mm Tool Holder Quick-change system Tool Turret Bearing Diameter In front bearing: 660 / 790 mm Chuck Mount Cylindrical: 180 mm Chuck diameter up to: 260 mm Workpiece Spindle Bearing Diameter In front bearing: 170 mm Guide System for Machining Units Roller linear guides, size 45 Feed Drives Cross slide adjustment W-axis, Z-axis 100% duty cycle: Torque: 18 / 18 Nm Tool feed U-axis, X-axis 100% duty cycle: Torque: 18 / 18 Nm Steady rest Z3-axis 100% duty cycle: 10.5 Nm Tailstock right Z4-axis 100% duty cycle: 10.5 Nm Rotary feed workpiece C21-/C22-axis 100% duty cycle: 18 / 18 Nm Axis Speeds Feed / rapid traverse speed longitudinal W-, Z-, and Z3-axes: 0 – 40 m/min Feed / rapid traverse speed transverse U-axis, X-axis: 0 – 20 m/min Feed / rapid traverse speed Z3-axis (steady rest): 0 – 40 m/min Rotary feed workpiece C21-, C22-axis: 0 – 60 rpm Milling Drive Power per unit (nominal / max.): 15 / 30 kW Cutting speed: 120 – 255 m/min Torque at tool: 1,500 Nm

Stanje: generalkompletno obnovljen (rabljeno), Various piston pumps from Häcker available, PP version, different sizes from 1 - 10 m³/h, up to 10 bar, fully overhauled. Hnedpfx Ahjikl Tpo Dou

Stanje: skoraj kot novo (rabljeno), High-pressure pump with electric motor 260 bar 60 l/min at 1500 rpm and 30 kW (current configuration) 600 bar 60 l/min at 1500 rpm and 66 kW 600 bar 90 l/min at 2200 rpm and 97 kW Hjdjd Hniuspfx Ah Donu

Stanje: rabljeno, Leto izdelave: 2005, 1 used, very well-maintained crankshaft milling attachment for installation, e.g., on a lathe for milling crankshafts or other milling operations Manufacturer: SEMA, Origin Austria Model: SE 100 Year of manufacture: 2005 Technical specifications: Spindle taper ISO 50, Run-out / test mandrel L=300 mm = 0.01 mm Speed range, stepless currently set to 2,000 rpm Spindle designed for up to 3,000 rpm Drive power currently 15 kW Milling spindle designed for up to 25 kW Bearing diameter 110 mm The 2 bolted adapter plates under the milling spindle are each attached. You can use these plates for your lathe, modify them, or they may need to be newly fabricated. Mounting surface of the milling spindle: L x W: 490 x 250 mm Hnodpfxjddziyj Ah Dju Accessories / Special features: Milling spindle: • The milling spindle is mounted on the cross slide of your lathe • Stepless speed adjustment, frequency inverter make LENZE, rated up to 30 kW • Forward / reverse operation • Lifetime lubricated spindle bearings • Robust design with hardened and ground spindle • High precision • Double-supported spindle with 5 spindle bearings • Tool clamping via a threaded spindle • Mobile carriage with control panel • Emergency stop • Lockable main switch Drive dog gearbox for main spindle: • A long drive rod is mounted in the spindle bore and connected to the gearbox • Stepless speed adjustment, frequency inverter make LENZE • Forward / reverse operation • Jog mode fast / slow The pictures show this unit installed on a universal lathe SARO SPA 10 x 3000 for crankshaft milling. This lathe is not included in the scope of delivery! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Leto izdelave: 1990, Stanje: rabljeno, Material: Mild steel Drive motor: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Unladen weight: approx. 1500 kg Delivery rate: 14.4 m³/h Hjdogb D Irepfx Ah Djnu Max. operating pressure: 100 bar Technical documentation: No Note: Piston diameter: 57 mm, Stroke rate: 326 1/min, Stroke length: 105 mm

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 17.349 h, stružna dolžina: 500 mm, moč vretenovega motorja: 30.000 W, General Year of manufacture: 2017 Operating hours: 17,349 Control system: SINUMERIK 840D sl Hnedpfx Aswgnfuoh Dou Maximum Workpiece Dimensions Workpiece length up to mm: 500 Maximum swing diameter mm: 200 Stroke above center mm: 25 Maximum clamping diameter mm: 100 Mandrel diameter mm: 30 – 60 Working Area Longitudinal travel Z-axis mm: 602 Longitudinal travel Z-/W-axis mm: 602 / 602 Cross travel X-axis mm: 140 Cross travel X-/U-axis mm: 140 Steady rest Z3-axis depending on chuck Workpiece C21-/C22-axis degrees: 360 Tooling External diameter mm: 230 Tool Holder Quick-change system Tool Turret Bearing Diameter At front bearing mm: 660 * 790 Chuck Mount Cylindrical mm: 180 Chuck diameter up to mm: 260 Workpiece spindle bearing diameter At front bearing mm: 170 Guide System for Machining Units Roller linear guides, size 45 Feed Drives Cross-slide adjustment W-axes, Z-axis 100% duty cycle Nm: 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm: 18 / 18 Steady rest Z3-axis 100% duty cycle Nm: 10.5 Right-hand tailstock Z4-axis 100% duty cycle Nm: 10.5 Rotary feed Workpiece C21-axis, C22-axis 100% duty cycle Nm: 18 / 18 Axis Speed Feed/rapid traverse speed longitudinal W-, Z- and Z3-axes m/min: 0 - 40 Feed/rapid traverse speed crosswise U-/X-axis m/min: 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min: 0 - 40 Rotary feed workpiece C21-/C22-axis rpm: 0 – 60 Milling Drive Power per unit (rated/max) kW: 15 / 30 Cutting speed m/min: 120 - 255 Torque at the tool Nm: 1500

Stanje: generalkompletno obnovljen (rabljeno), Various piston diaphragm pumps from Abel, Emmerich, and Feluwa available, constructed in steel and PP, with different capacities ranging from 1 to 60 m³/h, up to 16 bar. All units fully refurbished. Spare parts also available for prompt delivery. Hnodpfxjfcy D Ds Ah Deu

Leto izdelave: 2012, Stanje: rabljeno, Machine designation: High-pressure pump Manufacturer: Abel Model: HP-K-25-56 Year of manufacture: 2012 Protection class: IP 55 Speed: 1480 rpm Operating voltage: 400/690 V Flanges: DN 80 Frequency: 50 Hz Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 14,400 l/h Dimensions: approx. L 1600 x W 1400 x H 1600 mm Empty weight: 1,500 kg Hnedpfxovtbcbe Ah Dju Technical documentation: No Condition: Used Price: On request

Stanje: rabljeno, Leto izdelave: 2017, stružna dolžina: 500 mm, moč vretenovega motorja: 30.000 W, General Year of manufacture: 2017 Control: SINUMERIK 840D sl Maximum Workpiece Dimensions Workpiece length up to mm: 500 Maximum swing diameter mm: 200 Offset above center mm: 25 Maximum clamping diameter mm: 100 Journal diameter mm: 30 – 60 Working Area Longitudinal travel Z-axis mm: 602 Longitudinal travel Z-/W-axis mm: 602 / 602 Cross travel X-axis mm: 140 Cross travel X-/U-axis mm: 140 Steady rest Z3-axis: dependent on chuck Workpiece C21-/C22-axis degrees: 360 Tool External diameter mm: 230 Tool Holder Quick-change system Tool Turret Bearing Diameter At front bearing mm: 660 * 790 Chuck Mount Cylindrical mm: 180 Chuck diameter up to mm: 260 Spindle bearing diameter at front bearing mm: 170 Guide System for Machining Units Roller linear guides, size 45 Feed Drives Cross slide WAxes, Z-axis 100% duty cycle Nm: 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm: 18 / 18 Steady rest Z3-axis 100% duty cycle Nm: 10.5 Tailstock right Z4-axis 100% duty cycle Nm: 10.5 Rotary feed workpiece C21-axis, C22-axis 100% duty cycle Nm: 18 / 18 Axis Speed Feed / Rapid traverse longitudinal W-, Z-, and Z3-axes m/min: 0 - 40 Feed / Rapid traverse cross U-axis, X-axis m/min: 0 - 20 Feed / Rapid traverse Z3-axis (steady rest) m/min: 0 - 40 Rotary feed workpiece C21-axis, C22-axis rpm: 0 – 60 Milling Drive Power per unit (nominal / max) kW: 15 / 30 Cutting speed m/min: 120 - 255 Hnjdpfx Ahewgndks Dsu Torque at tool Nm: 1500