Klopi Planer nakup rabljenega (1.872)

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Chedpfx Afjqlckpsqef Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 520 mm, število rezil rezkalnika: 4, vrsta nastavitve višine: električni, Oprema: motorna zavora, Description SCM FS 520 – Surface Planer & Thicknesser Combination Machine | Year of Manufacture: 1995 | Good Condition For sale is a robust and precise combination machine from SCM: SCM FS 520, year 1995, ideal for professional workshops and ambitious joiners/cabinetmakers. The machine has been regularly serviced and is in good technical condition. Technical Data & Equipment: + Manufacturer / Model: SCM FS 520 + Machine type: Combined Surface Planer & Thicknesser + Year of manufacture: 1995 + Motor power: 5.5 kW (three-phase current) + Cutter block: Centrofix system (quick knife change, precise cut) + Number of knives: 4 Centrofix knives + Planing width: 520 mm + Thicknesser width: 520 mm + Max. planing depth: approx. 5 mm + Thicknessing height: 3 – 250 mm + Feed speed: 6–12 m/min (two-stage) + Planer table length: approx. 2200 mm (infeed and outfeed table) + Pneumatic table opening: Yes – facilitates switching between surface planing and thicknessing + Electric height adjustment of thicknesser table with digital display + Weight: approx. 1000 kg + Extraction port: 120 mm + Voltage: 400 V Condition & Maintenance: + Machine from a well-maintained workshop + Centrofix knives in good condition + Tables are flat, bearings run smoothly Chjdex Aibaopfx Afqjf + Ready for immediate use + No known repairs required You will receive an invoice with VAT shown separately. Shipping via freight forwarder possible by arrangement. Price: +Negotiable €7,650 net ex-works Haldensleben.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Cross-Cut Circular Saw with 2 x Double Shafts. Vertical and Horizontal. For cutting battens, slats, lamellas, separation cuts with minimal kerf width. Maximum cutting height: 200 mm. Maximum cutting width: 200 mm. Clamping sleeves: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed speed frequency-controlled from 0 to 40 m/min. 8 pairs of driven feed rollers. Pneumatic, adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electrical control cabinet with control system. Saw sleeves and tools included. Soundproof cabin. The machine is in excellent, well-maintained condition and was used only sporadically. No visible wear on the feed rollers. Not in use for the last 12 years. Mechanisation: Infeed centring roller conveyor with adjustable feed gearbox. Discharge roller conveyor with integrated cross scraper conveyor. With adjustable feed gearbox. The mechanisation is of an older type. Electrical control cabinet with control system. Additional terms (Polish): Multi-blade Saw Gubisch Grimme Cross-cut Multi-blade Saw Multi-blade Saw for Lamellas Codpjx Ap Dzjfx Afqshf Cross-cut circular saw with 2 double shafts. Vertical and horizontal orientation. For cutting strips, battens, lamellas, separation cuts. With minimal kerf. Maximum cutting height: 200 mm. Maximum cutting width: 200 mm. Clamping sleeves: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed rate control: 0 – 40 m/min. 8 pairs of driven rollers. Pneumatic, adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electrical control cabinet with control system. Saw bushings and tools. Sound-insulated cabin. Machine is in excellent condition and only used sporadically. No wear visible on feed rollers. Has not been in operation for 12 years. Mechanisation: Infeed centring roller conveyor with adjustable feed gearbox. Outfeed roller conveyor with integrated cross scraper conveyor. With adjustable feed gearbox. Mechanisation is older. Electrical control cabinet with control system.

Stanje: zelo dobro (rabljeno), set di utensili, teste pialla per scorniciatrice Cedpfjwbwkcjx Afqjhf

Stanje: rabljeno, Leto izdelave: 1994, Rabljeni stroj Letnik izdelave: 1994 Cedsxwz Izjpfx Afqjhf Oprema in tehnični podatki: - Širina skobljanja: 410 mm - Min. višina debelinske obdelave: 3 mm - Maks. višina debelinske obdelave: 240 mm - Odvzem materiala: maks. 7 mm - Število nožev: 3 kos Tersa nožev - Nastavitev debelinske mize: mehanska - Prikaz debeline: mehanski - Motor: 4 kW - Hitrost pomika: 6/12 m/min - Prijemna valj: jeklo - Izhodna valj: jeklo - Premer izsesovalne cevi: 120 mm Razpoložljivost: predvidoma sredi aprila 2026 Lokacija skladišča: Hessen

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 112713, vhodna frekvenca: 50 Hz, Naprodaj Weinig Variomat štiristranski skobelni stroj, letnik 2008. Zanesljiv, natančen in zmogljiv stroj v odličnem stanju. Glavne značilnosti: Štiristransko skobljanje: spodnja, zgornja, desna in leva skobeljna glava Cjdsxuk R Hjpfx Afqjhf Stopenjsko nastavljiva hitrost podajanja Stabilen, brezvibracijski okvir stroja Enostavna nadzorna plošča

Stanje: novo, Leto izdelave: 2025, Planer-thicknesser minimax fs 41es TERSA Maximum configuration for professional use. Article number 5503431 Brand Holzkraft / SCM Helical-toothed steel infeed roller for constant and uniform material feed, enabling chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for efficient planing of precious hardwoods Models equipped with TERSA cutterblock for rapid, tool-free knife changes and especially quiet operation Material feed with two selectable speeds Extra-long surfacing tables provide easy and precise workpiece alignment Work tables made of grey cast iron, annealed and stress-relieved, making them resistant to deformation and permanently flat Simultaneously rear-opening surfacing tables for minimal setup times Thicknessing table adjustment via handwheel with numeric thickness display High machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/grey cast iron construction Quality – Made in Italy TECHNICAL DATA Dimensions & Weights Length (product) approx. 2200mm Net weight approx. 450kg Width/depth (product) approx. 1160mm Surfacing Total table length 2200mm Fence length 1200mm Working height 905mm Fence height 150mm Max. stock removal, surfacing 5mm Chjdpfxolht Hts Afqof Chip extraction connection Suction port diameter, thicknessing: 1 x 120mm Thicknessing Thickness table length 775mm Max. working height thickness 240mm Table width 410mm Max. stock removal, thicknessing 5mm Min. working height thickness 3mm Electrical Data Main drive motor power 5kW Mains frequency 50Hz Connection voltage 400V Cutterblock Cutterblock type: TERSA Cutterblock speed 5000rpm Cutterblock diameter 95mm Max. planing width 410mm Number of knives 4 Feed Feed speed 6 / 12m/min SCOPE OF DELIVERY Planing jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: Ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7616 TEHNIČNI PODATKI - širina valja: 510 mm - valj s 4 noži - dolžina miz: 2640 mm - zaščita valja - liti mizni plošči - obe mizni plošči nastavljivi - originalno litoželezno vodilo nastavljivo pod kotom - motor: 4 kW Chodowbdn Uspfx Afqsf - premer priključka za odsesavanje: 160 mm - dimenzije (d/š/v): 2640x1000x980 mm - teža: 970 kg PREDNOSTI – nemška proizvodnja – ni prebarvana – dolge mizne plošče – rabljeni skobeljni stroj – zelo dobro stanje Neto cena: 9900 PLN Neto cena: 2350 EUR glede na tečaj 4,2 EUR (Cene se lahko spremenijo glede na večja nihanja)

Stanje: zelo dobro (rabljeno), CASOLIN TOPStar 530 12/24 Thickness Planer Technical specifications: Cedpfxou T D Hqs Afqjhf Maximum planing width: 520 mm Maximum planing height: 300 mm Cutter block diameter: 110 mm Number of knives: 4 pcs Feed speed: 5/8/12/19 m/min Electric lifting Extraction port diameter: 160 mm Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 1060 mm Width: 1050 mm Height: 1280 mm

Stanje: dober (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 520 mm, premer gredi skobeljnika: 120 mm, skupna dolžina površin za skobljanje: 2.250 mm, skupna dolžina: 2.250 mm, odstranjevanje ostružkov pri površinskem obdelovanju (max.): 5 mm, odstranjevanje ostružkov: 5 mm, višina ograje za poravnavanje: 1.200 mm, število rezil rezkalnika: 4, skupna masa: 695 kg, vrsta nastavitve višine: mehanski, višina prehoda: 240 mm, višina obdelovanca (maks.): 240 mm, vrtljajska hitrost (min.): 5.000 obr/min, Oprema: motorna zavora, nizka raven hrupa, fs 52es TERSA Planer-Thicknesser HOLZKRAFT As-new machine with signs of use Year of manufacture: 2024 Ideal for demanding craftsmen and carpenters The particularly long, one-piece planer tables allow for easy straightening of workpieces Working tables made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening planer tables with tension spring support for fast and convenient conversion Thanks to the fixed-mounted extraction hood, there is no need to reconnect the extraction hose during conversion, saving valuable working time Helical-toothed steel infeed roller ensures consistent and even wood feed Rubber outfeed roller at the thicknesser exit ensures smooth timber extraction Material feed with four speeds Thicknesser table adjustment via handwheel with integrated height display Codpfjxxtcyox Afqohf Start and stop switches in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth running Prepared for slot mortising unit Quality made in Italy

Stanje: rabljeno, Leto izdelave: 1994, Rabljeni stroj Leto izdelave: 1994 Oprema in tehnični podatki: - Moč motorja: 3 kW - Hitrost vretena: 5.000 obr/min - Premer vretena: 120 mm - S 4-rezilnim rezkalnim vretenom - Hitrost pomika: 8 + 14 m/min - Največja višina hoblanja: 230 mm - Odsesovalni nastavek: Ø 150 mm - Skobelni del: - Dvodelna zložljiva miza, sinhronizirana na obeh straneh - Nastavitev višine mize: preko dvojne kardanske gredi, ročaj z merilnikom - Prislon: nagiben, naklon z lečo merilnikom - Debelinka: - Z izhodnim valjem, vzmetno vpetim - Pogonski valji pomika sinhrono gnani Mere (skobelna miza): 2.040 × 410 mm Teža: 560 kg Razpoložljivost: takoj Chedsxr R T Ajpfx Afqjf Lokacija skladišča: Röllbach

Stanje: novo, Leto izdelave: 2025, Working width: 410 mm Cutterhead: Tersa Number of knives: 4 Jointer table length: 2360 mm Jointer table adjustment: lever Chip removal display: scale Concave/convex joint display: - Jointer fence angle adjustable: yes Motor power: 4.4 kW Machine length: 2360 mm Chodpfogqwx Asx Afqsf Machine width: 860 mm Weight: 475 kg

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Equipment Options Ideal for demanding craftsmen and joiners The extra-long, one-piece surfacing tables ensure easy workpiece guidance. Work tables are made of cast iron, making them resistant to wear and permanently flat. Rearward, simultaneously opening surfacing tables with spring-assisted support for quick and convenient changeover. Thanks to the fixed-mounted extraction hood, changing the extraction hose during retooling is unnecessary—saving valuable working time. Helically serrated steel infeed roller ensures constant and even feed of the timber. Rubber outfeed roller at the thicknesser exit guarantees smooth timber discharge. Material feed with four speeds. Thicknessing table adjustment via handwheel with integrated display for planing height. On/off switch positioned conveniently for the operator. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising unit installation. Quality made in Italy. Dimensions and Weights Length approx.: 2250 mm Width/depth approx.: 1370 mm Weight approx.: 695 kg Surfacing Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Chodoff Hdmjpfx Afqof Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Setup Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: The dimensions account for maximum travel or usable length. Thicknessing Thicknesser table length: 520 mm Thicknesser table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: zelo dobro (rabljeno), Catalogue number: 7641 ADVANTAGES – Top-performing wide planer for both green and dry timber – Perfect for processing logs, flooring boards, etc. Chodpfxewfti Ao Afqjf – 3 planing shafts + 3 spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition TECHNICAL DATA Maximum planing width 800mm Maximum planing height 200mm Top section: - Powered feed roller, serrated - Kickback fingers - Pressure beam - 2 feed rollers, serrated - Pressure beam - Planing shaft 800mm, 4-knife, 7.5kW - Pressure beams - Profiling shaft 800mm, 4-knife (fitted with 3 straight knives and 1 profiling knife) - Pressure beam - Outfeed smooth roller Bottom section: - Guide bar - Infeed table - Smooth feed roller - Planing shaft 800mm, 4-knife, 7.5kW - 2 smooth feed rollers - Divided smooth, sliding roller - Side pressure at outfeed Rear section: 2 side spindles with pressure assemblies: 1) Vertical right 90mm, 4kW 2) Vertical left 90mm, 4kW Spindle diameter: 35mm Spindles can be set alternately Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle 350mm, adjustable up/down + right/left, 5.5kW Spindle diameter: 40mm Outfeed: 4 upper metal sliding rollers, 2 lower driven rubber rollers Adjustable rollers in bottom table 6 feed speeds: 7/14/9/18/11.5/23 m/min Feed motor: 2.2kW Extraction port diameters: 3×180mm, 130mm Dimensions (LxWxH): 3100x2000x1900mm Weight approx.: 3500kg Net price: 64,900 PLN Net price: 15,450 EUR (subject to exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Stanje: novo, Main machine features: The TH 630 thickness planer is a simple, robust design intended for daily workshop use, featuring a planing shaft width of 630 mm. It is equipped with a large, heavy-duty, ribbed cast iron table, which effectively eliminates any vibrations during operation. The machine boasts an exceptionally powerful motor driving the cutterhead (fitted with serrated knives), making the process of planing even the most difficult wooden elements a straightforward task. Each knife can be easily replaced if worn or damaged. Table height adjustment is automatic after entering the required dimensions. These advantages enable highly precise cutting and machining settings. Advantages: - Working table mounted on 4 screws - Controller for automatic table height adjustment - 120 mm cutterhead with 4 knives - Capable of handling large workpieces Technical specifications: - Max planing width: 630 mm - Max planing height: 300 mm - Min length of workpiece: 280 mm - Cutterhead diameter: 120 mm - Number of knives: 4 - Knife dimensions: 630x30x3 mm - Power supply: 400 V - Total power: 7.5 kW - Variable feed speed: 4–20 mm/min - Electric table lifting - Extraction port diameter: 150 mm - Weight: 890 kg - Table dimensions: 1050x630 mm - Cutter block speed: 5,500 rpm Cjdpogpg E Ssfx Afqjhf Machine available immediately from stock! Machine dimensions: - Length: 1,060 mm - Width: 1,060 mm - Height: 1,160 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Bäuerle ravnalni skobeljni stroj Tip: AS 510 Leto izdelave: 1994 Nožna os: 3 noži Centrofix Širina skobljanja: 510 mm Moč motorja: 5,5 kW Pomožni prislon Zaščita nožev Fried Upravljalna plošča zgoraj Digitalni prikazovalnik Cedpsxgbw Isfx Afqshf Vhodna miza: 1630 mm Izhodna miza: 1220 mm Lokacija: na zalogi 54634 Bitburg - na voljo takoj -

Stanje: zelo dobro (rabljeno), CATALOG NUMBER: 7556 Technical specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal: 240 mm, 5.5 kW 2) Right vertical: 160 mm, 5.5 kW 3) Left vertical: 160 mm, 5.5 kW 4) Top horizontal: 240 mm, 7.5 kW - All heads adjustable up/down, right/left - Spindle diameter: 40 mm – From the top: - 6 feed-in drive rollers, toothed (including 2 double rollers) - 2 feed-out drive rollers, rubber, smooth – From the bottom: - Side pressure before and after the roller in the lower table - Feed-in toothed, driven, swiveling roller before the first spindle in the lower table - 2 pneumatic side pressures - Feed-out driven roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable up/down - Central lubrication - Electric thickness setting - Lifting motor: 0.75 kW - Infinitely variable feed speed via inverter: 6–30 m/min - Feed motor: 3 kW - Feed on cardan shafts - Fully enclosed in soundproof cabin - Extraction port diameters: 4 x 150 mm - Dimensions (L/W/H): 3750 x 1750 x 1800 mm Cedpjvyzn Rjfx Afqjhf - Weight: 3300 kg ADVANTAGES – 4-head configuration – Ideal for both wet and dry wood – Second-hand machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (depending on rate 4.2 EUR) (Prices may change with larger exchange rate fluctuations)

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: Cedepgkmwspfx Afqjhf T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: zelo dobro (rabljeno), Catalogue Number: 6338 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW Csdpfxehp N R Ie Afqohf 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6000 rpm Top feed: - 6 steel infeed rollers, toothed and powered (2 double rollers) - 4 rubber outfeed rollers, powered (1 double roller) - 3 pressure rollers at the outfeed Bottom feed: - Lateral pressure at infeed - Powered, toothed, swivelling infeed roller in lower table - 3 smooth metal feed rollers - Pneumatically adjustable rollers - Infeed table length: 1190 mm - Centralised table lubrication - Electric thickness adjustment - Body lifting motor: 0.56 kW - Infinitely variable feed speed via inverter: 6–24 m/min - Feed motor: 3.7 kW - Feed through Cardan shafts - Enclosed in soundproof cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5100 x 2070 x 1900 mm - Weight: approx. 5000 kg ADVANTAGES - 7 heads - Universal spindle - Ideal for wet and dry wood - Spindles equipped with brakes - Technical documentation (DTR) - Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterhead and planer blades – quick-change system The Tersa planer blade system allows for blade changes within seconds and provides especially quiet operation. Helically geared steel feed roller ensures consistent and even wood feed Extra-long planing tables Codpfxebuldyo Afqjhf Large planing fence can remain in place when opening the planing tables. Planing tables open towards the rear Heavy machine weight Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thicknessing table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter/number of knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutterhead, anodized planing fence Available from stock in Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014,

Stanje: novo, Leto izdelave: 2025, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve the perfect foundation. The T54 was developed precisely with this goal in mind. It enables you to easily plane workpieces at the most modern standards and safely fit them with accurate angled edges. The machine comes as standard with a TERSA solid steel cutter block. The Xplane cutter block with shear-cut action is available as an option. Chamfering is effortless, as the user-friendly single-handed adjustment allows any angle between 90° and 45° to be quickly set. The robust cast iron tables of the T54 provide a secure platform, even for large and heavy workpieces. If additional support surface is required, both the infeed and outfeed tables can be extended by 380 mm each—also made of cast iron, of course. Technical Data Table width: 500 mm Csdpfx Ajpq If Defqjhf Table length: 2840 mm Maximum cutting depth: 8 mm Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 Rotation speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Electrically driven table adjustment Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel Xplane cutter block with 3 spiral knife rows (each row with 26 domed carbide knives; 2 counter knives), includes full knife set and a Torx T20 T-wrench; spindle speed 6,000 rpm included. The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex-stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Large surfacing tables made of grey cast iron The adjustment of the surfacing table is done via a precise parallelogram system, ensuring that the distance between the table ends and the cutter shaft remains constant in every position The large, stable fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° The fence tilt can be read from the operator's position Supplied as standard with auxiliary fence Large four-knife cutterhead, precision bearing Smooth operation due to precision unit and heavy cast construction Powerful industrial motor Maximum operator safety with utmost ease of use Chip removal display via scale Manual table adjustment Motor protection switch Equipment Details Including folding auxiliary fence for narrow workpieces Manual quick adjustment of chip removal with scale and clamping rotary knob Safety Guard Chsdpfx Aoff Efcjfqjf The safety guard is foldable and designed to ensure operator protection without hindering the workflow TERSA Models with Tersa Cutterhead System No more adjustment or screwing Cutter knives change within seconds Self-locking Very low noise emission Perfect planing results Dimensions and Weights Length approx. 2750 mm Width/Depth approx. 1500 mm Weight approx. 680 kg Surfacing Total table length 2720 mm Infeed table length 1498 mm Max. chip removal 8 mm Fence length 1200 mm Fence height 190 mm Fence tilt range 90° - 45° Dust extraction connection Extraction port diameter 120 mm Drive Power Main motor 7 kW Installation Information Required length 2750 mm Required width/depth 1604 mm Space requirement explanation: Dimensions include maximum travel paths or usable lengths. Electrical Data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 5000 rpm Max. planing width 520 mm Location: Ex-stock 54634 Bitburg - available immediately -

Leto izdelave: 2022, Stanje: novo, XSD310 400 Volt Weight: 280 kg Surface Planer Planing width: 310 mm Total length of planer tables: 1400 mm Cutter block diameter: 70 mm Tersa cutter block Speed: 5500 rpm Planer fence dimensions: 1300 x 150 mm Tilting range of planer fence: 90 - 45 degrees Maximum chip removal: 4 mm Motor power: 4 HP Thickness Planer Thickness table dimensions: 430 x 310 mm Thicknessing pass-through height: 230 mm Infeed roller diameter: 30 mm Feed speed: 6 m/min Accessories: Tersa cutter block Handwheel adjustment of thicknessing table with mechanical indicator Chodpfx Aedkl Sqjfqef Location: In stock at 54634 Bitburg Machine is on display at our showroom and available immediately.

Stanje: novo, Leto izdelave: 2025, CASADEI PFS 520 – Surface and Thickness Planer with 520 mm Planing Width and Motorized Thickness Table Adjustment Robust steel and cast iron construction Large, ribbed surfacing tables made of cast iron, stress-relieved to prevent distortion Smooth operation due to high dead weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutterblock, precision mounted Helical gear steel infeed roller for particularly uniform and gentle feeding of wood Outfeed roller with rubber coating Large surfacing fence, tiltable from 90° to 45°, easily readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa Cutterblock System: Planer knife change in seconds When starting the machine, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection sets itself automatically, no adjustments or screws required The surfacing table is adjusted using a stable and precise parallelogram system, ensuring that the distance between the table edges and the cutterblock remains constant in any position The sturdy aluminum surfacing fence is anodized as standard, easily adjustable and provides a generous support surface Adjustable tilt from 90° to 45° is easily readable from the operator's position Auxiliary fence included as standard for safe planing, even of narrow workpieces Image shows machine with optional equipment The extraction port position remains the same for both surfacing and thickness planing No additional extraction hose or complicated repositioning around the machine is necessary Cjdpfxsbxz S Ho Afqshf Technical data: Total length of surfacing tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Fence dimensions: 1200 x 190 mm Fence tilt range: 90° – 45° Min./Max. planing height: 3 / 250 mm Cutterblock diameter/number of knives: 100 mm / 4 pcs Feed speed: 5 / 8 / 12 / 18 m/min Spindle speed: 5000 rpm Motor power: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available