Jedilni Pribor nakup rabljenega (703)

Leto izdelave: 1989, stanje: dober (rabljeno), Complete Fanuc CNC control system, year 1989 Gtjdjh Iz Diepfx Ad Aow Type: 0-Mate T. Installed in a cabinet.

Leto izdelave: 2000, stanje: dober (rabljeno), Lot of soft and hard jaws for 3-jaw power chuck RÖHM 630 mm. Gjdpfx Adswd Tl Is Aotw

Leto izdelave: 1994, stanje: dober (rabljeno), Spare parts for MONFORTS CNC lathes KNC 5 /1250 (Electronics identical to KNC 4 - KNC 8) 1. Handwheels: Price €1,500 1. All axis motors: Price €2,000 1. Cross slide: Price €1,800 1. Tailstock: Price €1,800 1. Ball screw with nut, Z-axis: €750 1. Cover for Z-axis ball screw: €250 1. Chip conveyor for turning length 1250 mm Gteded Nmnwepfx Ad Aew with coolant pump: Price €2,800 1. Main spindle headstock: Price €1,800

Leto izdelave: 2000, stanje: dober (rabljeno), Driven tool holders VDI 60 / ATC Gsdpfx Adsh Iz Duj Ajtw For large CNC lathes: RAVENSBURG / HEYLIGENSTAEDT / WOHLENBERG, etc. 2 units: SAUTER 0.5.921.106072.813 No. 1 and 2 with ATC 1 unit: SAUTER 0.5.921.106072.814 No. 3 with ATC 1 unit: WENDEL 214.060/A3820 No. 4 with ATC 2 units: MULTIFLEX 252.71.566 No. 5 and 6 without ATC In good condition.

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), We have spare parts available for the CNC lathe VDF Boehringer CM180. Available parts: - Turret head: €1,500 Gedpfx Adegqurbe Aetw - Tailstock: €1,000 - Main spindle stock: €3,000 - Ball screw for X and Z axes: €1,000 - Axis motors X and Z: €3,000 - Main spindle motor: €3,250 - Hydraulic unit: €1,200 - 250 mm chuck with clamping system: €1,800

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), We have a large stock of used axle motors, motors, etc. available in our warehouse. Please inquire for your specific requirements. Gtedpfsgtmwtex Ad Ajw Our inventory covers both older and nearly new CNC turning and milling machines, with drives and components from INDRAMAT, SIEMENS, and FANUC.

Stanje: rabljeno, Leto izdelave: 2000, Spare parts for CNC lathe HITACHI SEIKI Type: HT 23 RIII, year 2000. 1. Spindle head with chuck 1. X and Z axis motors Gsdpewf Aftefx Ad Ajtw 1. Control panel with monitor 1. X-Z axis controller 1. Tool turret VDI 40 with 12 positions

Leto izdelave: 1982, stanje: dober (rabljeno), Spare parts for CNC lathe INDEX GU 1500, year 1982 The following parts: Gtsdpjd Etq Hjfx Ad Aew Tool turret Tailstock Complete guideway covers.

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), CNC control FANUC FANUC 15TF Complete control unit with axis drives for X and Z Gtsdpfogqucpjx Ad Asw for CNC lathe.

Leto izdelave: 2010, stanje: skoraj kot novo (rabljeno), We offer the following accessories for the Weiler E30 lathe: 1x Faceplate Schunk 250mm, Price: €600 Spindle nose DIN 55027 size 5 Gjdpfx Adogabvns Astw 2x Faceplate Röhm 260mm, Price per piece: €650 Spindle nose DIN 55027 size 5 1x Travelling steady, Price: €450 2x Driving flanges, Price per piece: €210 Spindle nose DIN 55027 size 5 All parts are in very good condition.

Leto izdelave: 2010, stanje: dober (rabljeno), Power chuck for vertical and horizontal CNC lathes Manufacturer: SCHUNK Type: ROTA NCO260 Year: 2010 Diameter: 260 mm with intermediate flange diameter 220 mm Spindle nose on flange according to DIN 55028 / A6 Drawbar thread: M24 Gtedpfx Adoikzy Dj Asw Max. speed: 4500 rpm In good condition. 2 pieces available Price is for 1 piece.

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Main spindle motor, manufacturer: INDRAMAT Type: 2AD160C-B35LA1-BS03-A2V2, year of manufacture: 1996 Gtodpfx Adsgtmuuo Asw For further details, refer to the nameplate. From CNC lathe. (The matching INDRAMAT motor controller is also available from us.)

Leto izdelave: 2005, stanje: dober (rabljeno), 7 Driven Tool Holders suitable for CNC Lathe Manufacturer: TRAUB TNA 480 Tool Mount Size: VDI 40. Gtodpfjhwnfkjx Ad Aow Compatible with SAUTER tool turret with VDI 40 interface. 7 Horizontal units No. 3/4/5/6/7/8/9 for drilling and milling; price per unit: €550 2 Horizontal units No. 1 and No. 2 for thread tapping; price per unit: €600 1 NC drill chuck VDI 40, clamping range 1–13 mm; price: €100 1 NC drill chuck VDI 40, clamping range 2.5–16 mm; price: €150

Stanje: rabljeno, Leto izdelave: 2015, Premer žaginega lista 350 mm Zmogljivost rezanja 90° (pravokotnik) 100 x 90 mm Zmogljivost rezanja 90° (kvadrat) 90 x 90 mm Zmogljivost rezanja 90° (okroglo) Ø 95 mm Zmogljivost rezanja 45° (pravokotnik) 75 x 80 mm Zmogljivost rezanja 45° (kvadrat) 75 x 75 mm Zmogljivost rezanja 45° (okroglo) Ø 90 mm Vrtljaji vretena 38/19 obr/min Pogonska moč 1,5 / 0,75 kW Po naši oceni je stroj v dobrem rabljenem stanju in ga je možno po dogovoru videti priključenega na elektriko. Gjdpfx Adjygx Dyj Aotw Pribor, prikazana orodja in vpenjalne naprave so vključeni le, če je to navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih ter vmesna prodaja so pridržane!

Stanje: dober (rabljeno), Leto izdelave: 1998, CNC potopna erozijska stroj Proizvajalec: INGERSOLL HANSEN Tip: GRANTRY 1000 Leto: 1998 Krmiljenje: MITSUBISHI 64 Bit CNC multipuse Generator: 70 Amp Pomiki: X 700 mm, Y 1350 mm, Z 500 mm Delovni rezervoar: 1000 mm x 1600 mm x 550 mm Gsdpet Dbaksfx Ad Astw Maks. obremenitev mize: 3000 kg Hladilni sistem, dokumentacija na voljo, varnostno kopiranje podatkov na voljo Pribor: držalo za orodje Hirschmann.

Stanje: rabljeno, Leto izdelave: 2007, Napetost 400 V Moč 800 VA Frekvenca 50 Hz Teža stroja pribl. 355 kg Po naši oceni je stroj v dobrem rabljenem stanju in ga je možno po predhodnem dogovoru pod elektriko tudi preizkusiti. Naprava je pregledana do 11/24 Pribor, prikazana orodja in vpenjalna sredstva so vključena v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do predhodne prodaje! Gtodpfxsxwdxcs Ad Ajw

Leto izdelave: 2000, stanje: kot nova (razstavni stroj), The following spare parts from MORI SEIKI VL250, year 2000: 1. Turret (not complete) Ball screw with nut for X and Z axes X and Z axis guideways, parts are from a new machine Gsdpfxocbinnj Ad Astw X-axis motor See photos.

Leto izdelave: 1990, stanje: rabljeno, 2. Tool Turret Heads, Manufacturer: DUPLOMATIC, Year approx. 1990, Type: BSV-N250 8/20-110/50 Tool holder size: VDI50 Number of tool stations: 8 positions Center height: 125 mm Price per piece. Gtedpfx Asbaf Spsd Asw

Leto izdelave: 1995, stanje: rabljeno, 2x Available Main Spindle Controller SIEMENS SIMODRIVE Gtjdpfx Ajdi Hihsd Ajw Type: D380-D430/120A. Price per piece.

Leto izdelave: 1992, stanje: rabljeno, 2. Tool turret, manufacturer SAUTER, type: 0.5.480.525 with 8 positions, VDI 50 holders with control unit EK 400 Gededg Tixepfx Ad Aotw These are from vertical lathes.

Stanje: dober (rabljeno), Olivnik, cevni olivnik, linijski olivnik, Eco linijski olivnik -Olivnik: cevni olivnik, linijski olivnik za rušilna kladiva ali druga pnevmatska orodja Gjdet Snvzepfx Ad Astw -Količina: na voljo 3 olivniki -Cena: na kos -Mere: 450/110/V100 mm -Teža: 3,1 kg/kos.

Stanje: rabljeno, Leto izdelave: 1959, Proizvajalec: DANLY, Tip: S4-800-132-72, Leto izdelave: 1959, Največji tlak: 800 t, Največji tlak: 800 t, Vpenjalna površina mize: 3.350 x 1.830 mm, Vpenjalna površina deske: 3.350 x 1.830 mm, Hod bata: 610 mm, Nastavitev bata: 508 mm, Število hodov: 12 - 16 hodov/min, Pomikajoča miza, Tlak stenske blazine: 11 - 113 t, Hod stenske blazine: 203 mm, Hod bata blazine: 152 mm, Krmiljenje stiskalnice z operatersko ploščo, Lastni robot za izjemanje, Strothmann (ne deluje), Krmilne in upravljalne omarice, Pribor Gtsdpfx Ajx R Eftjd Asw +++ Pozor: Stroj je del spletne dražbe! +++

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Pneumatic Pressure Clamp ensuring precise adherence of the workpiece to the table of the panel saw. This results in enhanced precision and cutting quality, facilitating and accelerating the panel sizing process. The clamp is very simple to install and operate. Application of a woodworking pneumatic pressure clamp for a panel saw: Lack of proper pressure securing the panel to the panel saw table is an issue that brings several potential consequences, significantly affecting the efficiency and quality of the cutting process. These problems include: Uncontrolled chipping: Without a solid pressure clamp, the panel may not be stably fixed on the table. In such cases, cutting can result in uncontrolled chipping, posing hazards to operators and potentially damaging tools and workpieces, thereby increasing production costs. Excessive material waste: Insufficient pressure may cause the panel to shift during cutting, leading to material losses since the misplaced panel can be cut incorrectly, requiring additional trimming or even scrapping the entire piece. Edge fraying: An unstable clamp can cause vibrations and inaccurate cutting. This, in turn, leads to edge fraying, negatively affecting the appearance and functionality of the workpieces, especially for finishing materials. Benefits of using a dual-section, 3200 mm pneumatic pressure clamp for panel saws: The solution to these issues is the use of a pneumatic pressure clamp which ensures the material is firmly pressed against the table throughout the cutting process. The resulting benefits include: Increased cutting precision: The pneumatic clamp allows secure and even fixing of the material to the table, resulting in higher cutting accuracy and eliminating uncontrolled chipping and edge fraying. Improved cut quality: Thanks to stable holding, the cutting quality is significantly enhanced. Panels are cut evenly without damage, increasing their value and aesthetics. Gsdpfx Aevxtcqed Aetw Faster and easier panel sizing: With secure clamping, operators can work more efficiently and safely, speeding up the entire sizing process and thus increasing production throughput. Simple installation and operation: The pneumatic clamp is straightforward to install and operate, requiring no complex procedures and providing easy control. 2-zone clamping: The pneumatic clamp features two zones, with each side (2 cylinders per side) of the saw table independently controlled. This offers greater flexibility and allows adaptation of the clamping force to different material types and production requirements. In summary, the pneumatic pressure clamp is a reliable solution that improves the quality, precision, and efficiency of panel cutting, leading to time and material savings while minimizing the risk of damage and accidents. Technical specifications: Clamping length: 3200 mm Material height: 100 mm Number of cylinders: 4 Operating pressure: 2.0 bar Manufacturer: Cormak

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Magnetic holder with a lifting force of 600 kg, designed for threading machines. Technical specifications: - Maximum lifting force: 600 kg - Hole spacing: 70 mm - Thread diameter: 8 mm Gtedpfxsvugxkj Ad Aow - Net weight: 23 kg - Overall dimensions (L x W x H): 282 x 122 x 215 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The tracing workbench dedicated for tapping machines is a robust and functional solution for professionals. It features holes for mounting the tapping arm as well as a ground tabletop with T-slots spaced at 152 mm. This high-quality table, sized 900 mm x 600 mm x 780 mm, ensures stability, precision, and mobility during thread cutting operations. Additionally, the workbench is equipped with tool cabinets for easy and practical storage of essential items. Description Gtedpfx Adevugwgs Asw - Equipped with dedicated holes for mounting a tapping arm - Ground tabletop with T-slots – 3x 14 mm, spaced at 152 mm – ideal for layout and scribing operations - The table is equipped with 2 tool cabinets. Tabletop dimensions: 900x600 mm Table height: 780 mm Tabletop thickness: 50 mm T-slot width: 3x14 mm T-slot spacing: 152 mm Weight: 99 kg