International 584 nakup rabljenega (8.894)

Stanje: nepreverjeno (rabljeno), Forst RF 16 Broaching Machine (Internal) -WKG 1371- Technical data: Manufacturer: Forst Model: RF 16 Max. pulling force: 16 t Max. stroke: 1200 mm Max. cutting speed: 5.6 m/min Max. workpiece diameter: Ø 700 mm Max. tool diameter: Ø 120 mm Workpiece mount bore: Ø 70 mm Nsdpehu E N Dofx Aqqswh Note: Control valve is missing

Leto izdelave: 1960, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1732, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI6DT Machine no.: 1732 Njdpjgyd Svofx Aqqowh Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1964, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Nwsdpfjgyd S Dox Aqqsh Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse. Njdpfjiw Dlkjx Aqqjwh

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical Specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer Nwjdpfx Ajlpadyjqqeh - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Leto izdelave: 1965, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices Njdpfetuuvzox Aqqowh • Machine documentation Remarks: The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. The machine is used but in good condition relative to its age. The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability.

Leto izdelave: 1980, stanje: rabljeno, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min Nwedpfx Ajcdtpleqqeh max. workpiece diameter: 320 mm broaching stations: 3 units weight: 4.8 t automatic tool feeder hydraulic clamping system for pull head and end-piece holder automatic loading device for workpiece diameters up to 100 mm magnetic chip conveyor

Leto izdelave: 1960, stanje: rabljeno, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Nwodpfx Aqoui Sboqjh Max. tool diameter: approx. 50 mm Broaching positions: 2 stations The machine is equipped with a 2-position rotary indexing table. It features an automatic tool feeder and is designed for manual series production. Tool locking in both the pull bridge and the tool feeder is mechanical spring-actuated (draw head DIN 1417).

Leto izdelave: 1959, stanje: rabljeno, max. pressing force: 16 t Nwodpfxe Rwa Uj Aqqsh max. stroke: 1250 mm cutting speed: 5.6 m/min return speed: 30 m/min

Leto izdelave: 1956, stanje: rabljeno, številka stroja/vozila: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine number: 1413 General / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition. Tensile force: 13,000 kg (max.) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Pull head chuck diameter: Ø 85 mm Clear gap between cylinders: max. 390 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1150 x 1500 x 3725 mm (with tool feeder extended) Power supply / Connected load: 380 Volt 50 Hz / 7.5 kW Accessories / Special Equipment: The machine’s traverse beam has 3 broaching tool holders; the workpiece table has 1 broaching station (modifiable). The tool clamping system and the tool feeder are designed for spring-actuated locking (DIN 1415). The machine is equipped with an automatic tool feeder; the existing tool feeder mount accommodates only 1 tool (central broaching station). An integrated coolant system for cutting oil is included. Nwjdpfx Aqjdbmgmjqsh Remarks: The machine is in good condition considering its age and is immediately ready for operation. It is designed for manually operated production runs with medium batch sizes. The machine features an automatic cycle. For use, ideally a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools are available on request. The machine is available for viewing under power at our warehouse.

Leto izdelave: 1951, stanje: dober (rabljeno), številka stroja/vozila: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-to-use condition Broaching stroke: 1500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: universal pull head for flat shanks up to 26 mm wide Clear bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: hydraulically, steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Hydraulic motor: 7.5 kW Nedpedcdrpsfx Aqqewh Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant-lubricant system • The machine is fitted with an oil and chip tray featuring a tool feeder carriage Remarks: The machine is ideal for manufacturing keyways and profiles. It runs smoothly, with clean guides and cylinder. Broaching needles and arbors can be supplied upon request. The machine is available for demonstration under power at our warehouse.

Leto izdelave: 1980, stanje: dober (rabljeno), številka stroja/vozila: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition Pulling force: 25,000 kg Broaching length: 2000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping head holder diameter: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Njdpfx Aqjdffzfoqswh Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Equipment: The machine is currently supplied without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously mounted on the machine (workpiece sliding table is adaptable). The tool clamping system is equipped with hydraulic locking in both the pull bridge and the feed unit. The machine features a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production, and for optimal performance, installation on a dedicated foundation (pit) is ideally required. Pulling heads and ejectors are available on request. The machine can be viewed in our warehouse.

Leto izdelave: 1958, stanje: rabljeno, številka stroja/vozila: 1545, Manufacturer: Karl Klink Njdpfx Aqeda Ugisqewh Model: RIS 6 x 1000 Year of Manufacture: 1958 Weight: 2,500 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with one broaching station, in operational condition Pulling force: 6,000 kg Broaching length: 1,000 mm Chuck diameter: Ø 85 mm Maximum gap between cylinders: 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / connected load: 380V, 50 Hz / 4 kW Accessories / Special Features: Machine is equipped with a workpiece table for one broaching station. The tool clamping system is designed for spring-actuated locking (DIN 1415). The machine has an integrated coolant system. A double pull-head for two flat broaching tools with workpiece support plate is included. Remarks: The machine is in a good condition considering its age and is ready for immediate use. It is designed for manual operation in medium batch production. For optimal use, a machine pit or alternatively a platform is recommended. Draw heads can be supplied on request. The machine does not include an automatic tool feeder. The machine can be inspected under power in our warehouse.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Znamka: BWF, tip: SI 6/1 AS-N X710, serijska št.: 1114, krmiljenje, znamka Siemens, tip 840 Dsl, obdelava Ø 40-400 mm, globina obdelave 710 mm, obdelovanec Ø 500-600 mm, največja dolžina obdelovanca 1.000 mm, glava WSTK z nastavljivim naklonom -5/+30, tračni filtrirni sistem, filter za oljno meglo, znamka Unifil, nadgradnja 2011. Nwodpeyfii Dofx Aqqjh

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 018.0179.90.035, (Please state your offer price) Sales only within Europe, including Turkey Nedpfeyh R Uwox Aqqjwh Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Leto izdelave: 1972, stanje: rabljeno, Max. pulling force: 10 t Max. stroke: 1250 mm Max. cutting speed: 10 m/min Nwsdecdtnhjpfx Aqqeh Max. return speed: 25 m/min Broaching stations: 3 units Passage width: 470 mm Distance between broaching stations: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via permanent magnet chip conveyor 1 hydraulic system, 1 work platform, electric-hydraulic shank and end-piece holder confirmation, automatic loading device

Leto izdelave: 2014, stanje: dober (rabljeno), številka stroja/vozila: 2014-1313, Offer 22651 Technical Data: - Mobile design with motorized forward and reverse travel, including steering - Motorized sanding stroke, forward and reverse, with adjustable speed Nsdpoi Apb Nofx Aqqswh - Longitudinal sanding stroke, forward and back - Motorized contact pressure – adjustable sanding pressure - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel: width 60 mm / diameter 300 mm - Pneumatic connection: 6 bar - Drive: 400 V / 2880 rpm / 7 kW - Space requirement approx.: W 5700 x H 1200 x D 1400 mm - Weight approx.: 800 kg

Stanje: rabljeno, Leto izdelave: 1952, Maksimalni hod 220 mm Dodatki: da Teža stroja pribl. 1,4 t Njdpfeyn R Nwsx Aqqowh

Stanje: rabljeno, Hydraulic Pump, Double Internal Gear Pump BOSCH REXROTH Type P2GH3/011 + GH3/013RE47 + 47U2-A502 ES Hydraulic Pump for TRUMPF TC 500 R, Trumpf Genuine Spare Parts Set No. 1737140, Double internal gear pump with hydraulic hoses Suitable for machine: TRUMPF TC 500 R TRUMPF Spare Part No.: 1737140 ES Hydraulic Pump Year of manufacture: NEW / unused in unopened original packaging Nwjdpfx Aqokpwu Hsqeh The kit consists of the following Trumpf spare parts: - 0348394 Double Internal Gear Pump BOSCH REXROTH P2GH3/011+GH3/013RE47+47U2-A502 - 0034257 Hydraulic hose 10.0 x 700 mm - 0105599 Hydraulic hose 12.0 x 730 mm Technical data hydraulic pump: Manufacturer: BOSCH REXROTH Type: P2GH3/011+GH3/013RE47+47U2-A502 Material No.: R900969031 Max. operating pressure: 350 bar Max. displacement volume: 16 cm³ Size: 2 Package dimensions (L x W x H): 540 x 400 x 300 mm Package weight: 22 kg NEW / unused in unopened original packaging, only opened for stocktaking From stock, delivered by Trumpf in 2019 and was not used.

Stanje: rabljeno, Leto izdelave: 2000, Tehnični podatki: Vlečna sila - maks.: 2,5 t Hod batnice - maks.: 1000 mm Premer obdelovanca - maks.: 40 mm Nodpow Dugasfx Aqqjwh Hitrost rezkanja: 60 m/min Hitrost povratka: 20 m/min Skupna potrebna moč: 24 kW Teža stroja cca: 6 t Prostorske mere cca: 1,7 x 2,4 x 4,77 m Vpenjalna plošča: 320 mm To je hidravlični stroj

Stanje: dober (rabljeno), JUNG D22 - Notranje krožno brusilni stroj -Stroj primeren za notranje brušenje / posodno brušenje -Najmanjša brusna odprtina 14mm -Največja brusna odprtina 150mm Nsdpfx Aqoyh Hhgjqswh -Brusna dolžina s čelnim brusilnim nastavkom 250mm -6x hitrost obdelovanca 46-270 min⁻¹ -Glava vretena z možnostjo nagiba levo/desno 30° -Razdalja med osjo vretena in sredino mize 250mm -Največja razdalja med vretenom obdelovanca in brusilnim suportom 935mm -Delovna miza / nagib naprej/nazaj po 5° -Ročni / avtomatski način delovanja -Nastavek za stožčasto brušenje -Luneta -Tričeljustna vpenjalna glava -Rezervna brusilna vretena (glej slike) Dimenzije: d x š x v 2,8 x 1,5 x 1,8 m / teža 3500 kg Pridržujemo si pravico do napak in sprememb.

Stanje: rabljeno, Internal Thread Cutting Machine Hagen & Goebel Type HG 124 Machine No. 4112 Year of manufacture: approx. 1980 Thread cutting capacity in steel: M3 to M10 Thread cutting capacity in cast iron: M3 to M15 Thread cutting capacity in brass: M3 to M17.5 Throat depth: 250 mm Nwodpfx Aqohgnd Asqeh Quill stroke: 80 mm Table size: 345 x 245 mm Spindle speed: 200 – 1000 rpm Motor power: 0.55 / 1.0 kW Electrical connection: 380 Volt, 50 Hz - 6 speed settings via belt change (3 belt steps + 2 motor speeds) - Thread pitch via lead cartridge - 2 lead cartridges with 0.8 mm and 28 TPI thread pitch - Table height adjustment with rack and pinion via hand crank on round column - Spindle taper Ø 14.8 to 16 mm - Keyed drill chuck Ø 1 to 13 mm Required space (L x W x H): 900 x 500 x 1800 mm Weight: 260 kg In good condition

Leto izdelave: 1979, stanje: pripravljen za uporabo (rabljen), Elementi: vretenasta glava, delovno vreteno, prirobnica planske plošče, stožec, miza, vodilna tirnica, vzdolžno vodilo, prečno vodilo, konjiček, vpenjanje obdelovanca, stožec konjička, vreteno obdelovanca. Z dokumentacijo in protokoli. Ogled na lokaciji je možen. Njdpfoyln Dtex Aqqjwh

Leto izdelave: 1971, stanje: pripravljen za uporabo (rabljen), Na voljo je valjčna notranja brusilka Wotan. Premer obdelovanca: 1200 mm, največji zunanji premer: 1000 mm, največji premer izvrtine: 900 mm, pomik X/Z: 370 mm/800 mm, zasuk: 15°, pomik mize: 500 mm, globina brušenja: 250 mm, hitrost vrtenja: 220 vrt/min. Dimenzije stroja X/Y/Z: pribl. 5000 mm/3000 mm/2200 mm, teža: pribl. 8500 kg. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Nwsdpsxyk S Uefx Aqqjh

Leto izdelave: 1955, stanje: pripravljen za uporabo (rabljen), Na voljo je klasični stroj za notranje cilindrično brušenje Fortuna. Razdalja med konicami: 1500 mm, višina konic: 225 mm, največji premer obdelovanca: 450 mm, največja masa obdelovanca: 300 kg, premer brusnega koluta: 450 mm, širina brusnega koluta: 80 mm, izvrtina: 203 mm, hitrost vrtenja: 265 o/min, mere stroja (X/Y/Z): približno 3450mm/1450mm/1550mm, teža: približno 4000 kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Nwsdpfx Aoyg Nvtjqqeh