Hidravlični Sistem nakup rabljenega (10.007)

Leto izdelave: 1975, Stanje: rabljeno, Kettle filter system with horizontally stacked filter elements. At the end of the filtration process, the diatomaceous earth is discharged centrifugally. Machine (additional description): Horizontal screen filter Capacity: 140 hl/h Tank volume: 26 hl Length: approx. 4000 mm Width: approx. 2000 mm Hsdpovcqpcefx Ag Tji Height: approx. 3500 mm Material: Stainless steel 1.4541 (vessel) Base construction: Mounted on feet Equipment: Diatomaceous earth dosing vessel with dosing pumps; pumps; fittings, instrumentation

Stanje: rabljeno, Leto izdelave: 2006, Fully automatic blending and carbonation system for continuous adjustment of original gravity, alcohol, and CO2 content. Hsdpfxjvcqlqs Ag Toi Beer inlet capacity: 200 hl/h Degassed water capacity: 100 hl/h Blended beer capacity: 300 hl/h CO2 supply minimum: 8 g/l >/= 99.98% purity Power consumption: 23 kW Current: 50 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar Length: 2790 mm Width: 1250 mm Height: 2440 mm Operation / Control: Fully automatic, control cabinet with operator panel Material: Stainless steel Equipment: Flange connections: Beer: DN80, degassed water: DN40, CO2: DN25, blended beer: DN65 Beer pump; carbonization section; flow metering; Anton Paar measurement of original gravity, alcohol, and CO2; pressure gauges; sampling valves; various additional valves Weight: 500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Kompletna linija vključno s transportnim trakom, skladiščnimi rezervoarji, pihali in velikim silosom (osnovna površina pribl. 5 x 5 m) naprodaj. Razstavljanje mora opraviti kupec, viličar je na voljo na lokaciji. Hsdpjyki Nbsfx Ag Tei Samo za izvoz!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals. Hodpfxowhc Sxs Ag Tei

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Vsaka oddaja ponudbe pomeni obveznost pravočasnega prevzema, bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! Dražba 8 vpenjalnih tulec, vključno s pnevmatskim vpenjalnim sistemom! TEHNIČNI PODATKI Premer: 140 mm PODATKI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 800 x 600 x 200 mm Teža: 50 kg Hedpjym Sn Sofx Ag Toi Zunanja referenca: Pieper – Lot 171

Leto izdelave: 2008, Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 400 kg, skupna dolžina: 2.200 mm, skupna višina: 1.500 mm, nadtlak (max.): 10 letvica, največja hitrost vrtenja: 4.860 obr/min, številka stroja/vozila: 28838, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe zavezuje k pravočasnemu prevzemu bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! Sistem je sestavljen iz vijačnega kompresorja in hladilnega sušilnika. TEHNIČNE PODROBNOSTI Tlak motorja: 22 bar Nadtlak: 10 bar Hedpfxoym Rwfs Ag Toi Hitrost vrtenja: 4.860 vrt/min Volumski pretok: 3,02 m³/min PODROBNOSTI STROJA Dimenzije in teža Dimenzije (D x Š x V): 2.200 x 860 x 1.500 mm Teža: 400 kg Zunanja referenca: Pieper - Lot 56

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: KR33986, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), Prodajamo več ventilatorjev, saj jih zaradi prenovitvenih del ne potrebujemo več. Na voljo za prodajo so tudi: Hjdpfx Aeyl H H Heg Tji Hurrican RF 200 letnik 1995 Hurrican HS F 300 letnik 2012 WEG W22 Premium EUSAS WAG 91L2

Stanje: dober (rabljeno), Sesalni sistem z 18 filtrskimi rokavi in 2 zbiralnima vrečama, namenjen za mizarske delavnice, tovarne pohištva, žage in druge obrate za obdelavo lesa. Tehnični podatki: - 18 filtrskih rokavov - 2 zbiralni vreči Hjdpfxjymfiij Ag Tji - Motor: 7,5 KM - Električna omarica - Skupne dimenzije: 2800 x 1200 x 3200 mm (višina)

Leto izdelave: 2018, Stanje: skoraj kot novo (rabljeno), Sistem vpenjanja na ničelno točko Proizvajalec: Vischer & Bolli VB tools Letnik: 2018 Stanje: neuporabljeno Sistem je sestavljen iz: 1 kos zaklepna plošča Dock Lock iz jekla Velikost: 600x200x85/95 mm z 2 vgrajenima valjema DockLock SAFE20 do 12,5 KN na valj 10 pritrdilnih lukenj za M16 imbus 1 kos posebna osnovna plošča iz jekla Velikost: 800x250x76 mm 1 kos DEUX-MILL vpenjalec 1 kos posebna osnovna plošča iz aluminija Velikost: 600x600x40 mm 5 kos dolgih vpenjalnih zatičev SAFE20 s centriranjem 10 kos dolgih vpenjalnih zatičev SAFE20 brez centriranja 5 kos izravnalnih vpenjalnih zatičev SAFE20 dolgih Hjdpfxogquv Uj Ag Tsi 1 kos hidravlična črpalka 25226ä

Stanje: rabljeno, Leto izdelave: 2021, 6000 W pri 20°C vodi in 32°C sobni temperaturi Dimenzije (D/Š/V) 55 x 55 x 140 cm Lokacija skladišča: dobavitelj Hodpfevvi E Aex Ag Tei

Stanje: rabljeno, Skupna višina 6500 mm, tloris 2000 x 2000 mm, postavitev na prostem. Kompaktna filtrirna serija, model PKFP – 1 element – 1,92 x 1,92. Filtrirni sistem z stresanjem, nadtlakovno delovanje. Dolžina filtrirne vreče 2500 mm, premer 180 mm, filtrirna površina 105 m². 2 ventilatorja za surovi zrak, 2 cevi (premer 300 mm). 1 x ventilator KT 300, moč 15 kW, zmogljivost 6361 m³/h, letnik 1999. 1 x ventilator S 25 / 300, moč 7,5 kW, zmogljivost 7400 m³/h, letnik 1993. 1 x transportni ventilator 6,1 kW, zmogljivost 57 m³/min, letnik 1996. Skupen volumenski pretok cca 14.000 m³/h. Briketirni stroj Höcker Polytechnik tip BrikStar C 3 - 12.1225, motor 3,0 kW, premer briket 65 mm okrogle, kapaciteta cca 40-45 kg/h, odvisno od specifične teže materiala. Lokacija skladišča: Nattheim. Hjdpfx Asvviytog Toi

Stanje: rabljeno, Leto izdelave: 2022, Plus freight €4,000.00 and installation and commissioning €5,000.00. Sanding System B Sand 5 with Partial Rotator Operating Method: The panel is placed on the infeed table. It enters the partial rotator and is centered. It is sanded in the sanding unit, processed both in forward and return pass. The panel is rotated in the partial rotator. The second side of the panel is then sanded in the sanding machine. There are then two options: either the panel moves to the outfeed table and is unloaded, or it returns to the infeed table and is unloaded there (the second option increases processing time). Sanding Unit Configuration: - 1 upper sanding lamella roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brushes suitable for sanding cross-grain fibers. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW each (2 units). - 3 upper sanding discs to perfectly cut longitudinal and cross-oriented wood fibers. Power: 1.5 kW each; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Upon detection of the panel edges, it tracks the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this unit ensures perfect wood sanding and/or intermediate sanding of panels. - All tools are controlled by frequency inverters. - All brushes equipped with quick-release sanding strips; replacement does not require changing the hub. - The discs feature air jets for optimized cleaning and operating time. - Sanding wheels equipped with hook-and-loop fastening system. - Feed and rotation are controlled via PLC to prevent edge breaking of workpieces. - High-quality sanding on 4 sides thanks to the unit’s consistent material removal. - Automatic and rapid switching of processing units. - Constant pass-through height; PLC and industrial software enable integration into a finishing line. - Infinitely variable speed control of discs, brushes, and feed via state-of-the-art frequency inverters. - Reversible rotation (right/left) of discs and brushes with different abrasive grades. - Individually driven feed adjustments for discs, rollers, and belts. - Additional adjustment options of brushes and discs to compensate for abrasive wear and to allow variation of sanding pressure on surfaces. - Robust machine base made of steel tubing ensures maximum rigidity, stability, and flatness. - Milled upper machine bed for optimal parallelism of the working surface for the sanding discs. - All unit carriages are mounted on linear ball bearing guides, providing high load capacity and precision. - Motor-driven feed belt, frequency inverter controlled, 0.55 kW. - Machine doors equipped with safety devices. - Machine doors feature viewing windows for monitoring workpieces during operation. - Pressure rollers below the units, diameter 80 mm, rubber-coated, for secure workpiece hold during processing. - Low ongoing costs thanks to individual replacement of lamellae. - Low operating noise due to enclosed machine housing. - All units fitted with extraction hoods and relevant extraction ports; cover plate with suction connector. Hedpfovvkipjx Ag Tsi - Fully encapsulated housing for a clean operating environment.

Stanje: rabljeno, Leto izdelave: 1985, Teža: cca 3000 kg Dimenzije: cca 3700 x 2000 x 1600 mm Lokacija skladišča: Nattheim Hedpfx Agevvi Tto Tji

Stanje: rabljeno, Leto izdelave: 2018, Nazivni volumenski pretok: 5087 m³/h Podtlak (Pa): 2300 Motor: 7,5 kW Dimenzije: 1080 x 820 x 860 mm Teža: 154 kg Skladiščna lokacija: Nattheim Hedpfx Aevxk Aneg Tji

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Naprodaj je Felder RL-160 naprava za ekstrakcijo čistega zraka z maksimalnim volumenskim pretokom 3200 m³/h. Naprava za odsesavanje je bila v naši razstavni dvorani uporabljena za razstavne namene in je tako rekoč nova. Hsdpoyh Ai Hjfx Ag Toi Tehnični podatki: - Maks. volumenski pretok: 3200 m³/h - Filtrirna površina: 10 m² - Priključek za odsesavanje – premer: 160 mm - Ročno čiščenje filtra - Testirano na prah H3 - Leto izdelave: 2024 Naprava se nahaja v A-5431 Kuchl in jo je mogoče kadarkoli v naših delovnih urah ogledati. Vmesna prodaja pridržana! Sorodni izrazi: naprava za čist zrak, odsesovalna naprava, odsesovanje, čist zrak, RL Referenca: R-A0117

Stanje: rabljeno, Leto izdelave: 2018, Technical data: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50Hz + N + PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine height at 1.6 m: n/a Hedpowf U Ruofx Ag Tsi Vibrations: none Maximum payload: 200 kg Washing tank: 900 l Rinsing tank: 900 l Oil separator: 200 l

Stanje: novo, Leto izdelave: 2025, PREMIUM ECO – Model Year 2025 – The Marking Champion Among Laser Markers! Metals – Plastics and much more! • EZCAD 3 (genuine 64-bit card) with up to 4 axes • Compatible with Windows Professional 64-bit • Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optional with variable pulse width and up to 2000 kHz for color annealing marking) • Scanner unit "DigiScan Eco 10" for high detail accuracy and precision • T-slot plate or threaded hole plate for easy fixturing and positioning of your workpiece • Large viewing window with certified glass – door opening 380 mm Hodpfx Ajfz D E Tjg Tji • Marking area approx. 100 x 100 mm (optional 150/200/300 mm) • Manual height adjustment with focus finder • Enclosure with manual door for easy and safe marking • Professional marking software in German language • Barcode and QR code support • Serial number function • Batch scanning from Excel file, network, or database • Laser parameter finder by matrix over 2 parameters (e.g. frequency to speed, frequency to power) • TCP/IP connectivity – various commands can now be transmitted to the software via TCP protocol. This enables easy integration of external components such as camera position detection, etc. • Industry 4.0 – via the TCP/IP protocol, status can be processed at any time • Inputs and outputs for automation • New look and feel – a fresh design for even more user-friendly and pleasant operation • 3D preview for rotary axis processing • Performance increase of up to 50% through 64-bit technology • Improved stability • Optional control of up to 4 axes WITHOUT switching via PLUG-ins • Optional DEEP engraving (Slicer software for Z-axis control) • Increased engraving speed for hatching thanks to new algorithms • Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus positioning check • LED lighting of the marking chamber for optimum illumination • Connection option for external fume extraction • Start button and emergency stop on the enclosure • Software suitable for Windows 10 • USB cable for PC connection • User manual and operating software in German Optional features available: • Intel I3 or I5 with 8GB RAM and ultra-fast M2 SSD • 23” TFT monitor for fatigue-free operation • Undercarriage with casters and space for computer and extraction system • IPG or SPI fiber laser sources in various power classes • Motorized and automatic height adjustment • Scanlab equipment • Suitable fume extraction systems • Automation for loading, conveyor belts, and much more • 3D marking and engraving function • Automatic focus adjustment via special laser sensor • Rotary unit in various designs • Motorized slides in X and Y directions • Interlock system for marking WITHOUT protective enclosure, just with PPE (personal protective equipment) for bulky parts Includes training at our training center in Schweinfurt! Our engraving lasers are manufactured in our factory in Schweinfurt! Therefore, individual requirements can be accommodated at any time! => Made in Schweinfurt! Images may show optional equipment! We are your partner for laser engraving and laser marking systems – whether manual or automated laser marking solutions. We’re happy to provide a quotation.

Stanje: novo, Leto izdelave: 2025, Model 2025 – Ready for Industry 4.0! Laser Marking System for: → Marking → Annealing of metals → Marking a wide range of materials Hjdpfxed Athme Ag Tsi → Deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width available). Simple operation and handling! Our exclusive XL laser marking system features: • Professional fiber laser source: JPT MOPAfix, 20W or 30W output • 1064nm, 20-400 kHz (ideal for perfect annealing marks) • "New Generation ECO" scanner unit • 19" PC control – no external card required • Extra-large viewing window with certified laser safety glass • Scan area approx. 150 x 150 mm • Motorized height adjustment • Full enclosure with 4 castors • "Weightless" lift-up door for safe marking EZCAD III Software: • Barcode and QR code support • Serial numbering function • Batch scanning from Excel file • Laser parameter finder using 2-parameter matrix • TCP/IP connectivity for external components • Industry 4.0: System status processing at any time via TCP/IP protocol • I/O ports for direct communication • New look and feel with fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis processing • Up to 50% performance boost with 64-bit architecture • Improved stability with integrated control board • Optionally control up to 4 axes (integrated) • Optional deep engraving with Z axis • Enhanced algorithms for rapid hatching • Completely redesigned Galvo generation • Dual laser pointer to check focus position • LED illumination of the marking area • Connection ports for external extraction systems • Start button and emergency stop (E-Stop) on the housing • USB and network connectivity for data access • Operating manual and control software in German • Protective enclosure, Laser Class 1 compliant • Includes 4 hours training at our training center (max. 2 persons) Need a tailored solution? No problem. Choose from our extensive range of accessories: → Camera systems for object recognition → Fiber laser sources in almost any configuration → Motorized and automatic height adjustment → Scanlab equipment → Automation options for component handling → Conveyors for infeed and outfeed → 3D marking and engraving capability → Automatic focus adjustment → Rotary unit → Motorized slides → Interlock system for marking without full enclosure, using only personal protective equipment (PPE) for oversized workpieces Our engraving lasers can be customized to your specifications for both design and size! → Made in Schweinfurt! Images may show optional equipment! Laser engraving machine, laser marker, laser marking, laser marking system, laser engraving system, laser engraving equipment, laser marking equipment, laser engraving, laser marking, laser engraving unit, laser marking unit, marker laser, marking laser, Markierheld

Leto izdelave: 2025, Stanje: novo, PREMIUM ECO – Model 2025 – The Marking Champion Among Laser Engravers! Metals – Plastics and much more! • EZCAD 3 (true 64-bit card) with up to 4-axis control • Compatible with Windows Professional 64-bit • Professional MOPA fiber laser source JPT, 20 watt output, up to 600 kHz (optional with variable pulse duration and up to 2000 kHz for color annealing marking) • Scanner unit "DigiScan Eco 10" for detailed and precise marking • T-slot or threaded plate for easy clamping and precise positioning of your workpiece • Large viewing window with certified pane -> door opening 380 mm • Marking area approx. 100 x 100 mm (optional: 150/200/300 mm) • Manual Z-axis height adjustment with focus finder • Protective enclosure with manual door for easy and safe marking • Professional marking software in German • Barcode and QR code support • Serial number function • Batch scanning from Excel files, network, or database • Laser parameter finder via matrix comparison of two parameters (e.g., frequency vs. speed, frequency vs. power) • TCP/IP connectivity. Various commands can now be sent to the software via TCP protocol. This enables effortless integration of external components such as camera-based position recognition • Industry 4.0 readiness: Status can be monitored and processed via TCP/IP protocol at any time • Digital inputs and outputs for automation purposes • New look and feel: Fresh design for even more intuitive and comfortable operation • 3D preview for rotary axis processing • Up to 50% increase in performance through 64-bit technology • Improved system stability • Optional: Control of up to 4 axes WITHOUT switching, via plug-ins • Optional: DEEP engraving (slicer software with Z-axis control) • New algorithms for increased engraving speed in hatching modes Hsdpfx Aofz D E Neg Toi • Completely new generation of Galvo scanners (Eco, Hi-Speed & 3D) with dual laser pointers for visual focus position check • LED illumination for optimal workspace lighting • External fume extraction interface • Start button and emergency stop (E-stop) on the chassis • Software compatible with Windows 10 • USB cable for PC connection • User manual and operating software in German Optional upgrades available: • Intel i3 or i5 PCs with 8GB RAM and ultra-fast M2 SSD • 23" TFT monitor for fatigue-free operation • Mobile base with castors, space for PC and extraction unit • IPG or SPI fiber laser sources in various power ratings • Motorized and automatic Z-axis height adjustment • Scanlab components • Suitable fume extractors • Automation for loading, conveyor systems, and more • 3D marking and engraving functionality • Automatic focus adjustment via dedicated laser sensor • Rotational unit in various versions • Motorized X and Y-axis positioning tables • Interlock system for marking WITHOUT full protective enclosure, but with PPE (personal protective equipment) for bulky parts Includes training at our Schweinfurt Training Center! Our engraving lasers are manufactured at our facility in Schweinfurt! This means custom requirements can be accommodated at any time! → Made in Schweinfurt! Images may include optional equipment! We are your partner for laser engraving and marking machines. Whether you require manual or automated laser marking systems, we will gladly provide you with a tailored quote.

Leto izdelave: 2025, Stanje: novo, Model 2025 for Industry 4.0! Laser Marking System for: => Marking => Tempering of Metals => Marking a wide range of materials => Deep Engraving Extremely detailed, high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width on request). Easy to operate and handle! Our Exclusive XL Laser Marking System features: • Professional JPT MOPAfix fiber laser source, 20 or 30W output • 1064nm, 20-400 kHz (for perfect temper marking) • 'New Generation ECO' scanner unit • 19" PC control, with no external card! • Extra-large viewing window with certified laser safety glass • Scan area approx. 150 x 150 mm • Electric height adjustment • Full enclosure with 4 casters • 'Zero gravity' lift door for safe marking EZCAD III Software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via 2-parameter matrix • TCP/IP connectivity for external components • Industry 4.0: Machine status can be processed at any time via TCP/IP protocol • Inputs and outputs for direct communication • New look and feel with refreshed design • Even more intuitive and clear operation • 3D preview for rotary axis processing • Performance increase up to 50% via 64-bit technology • Improved stability due to integrated controller card • Optionally control up to 4 axes (integrated) • Optional deep engraving with Z-axis • Enhanced algorithms for high-speed hatching • Completely redesigned galvo generation • Dual laser pointers for checking focus position • LED illumination of marking area • Connectivity for external exhaust system • Start button and emergency stop on the housing • USB and network access for data management • Operating manual and user software in German • Protective enclosure compliant with laser class 1 • Includes 4 hours of training at our training center (max. 2 persons) Looking for a tailored solution? No problem. Choose from our wide range of accessories: => Camera systems for object recognition => Fiber laser sources in nearly all variations => Motorized and automatic height adjustment => Scanlab equipment => Automation for loading/unloading Hsdpfx Ajk D S Nhog Toi => Conveyors for infeed and outfeed => 3D marking and engraving functionality => Automatic focus adjustment => Rotary axis => Motorized slides => Interlock system for marking WITHOUT protective housing, but only with personal protective equipment for bulky parts Our engraving lasers can, of course, be customized in design and size to meet your needs! => Made in Schweinfurt! Pictures may include optional equipment! Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking system, laser marking station, laser marking machine, marking laser, marking hero

Leto izdelave: 2025, Stanje: novo, Model 2025 for Industry 4.0! Laser Marking System for: ⇒ Marking ⇒ Annealing of Metals ⇒ Marking a Wide Range of Materials ⇒ Deep Engraving Extreme precision and high-contrast engravings thanks to JPT-MOPA system fiber laser source (variable pulse width optional) Simple operation and handling! Our Exclusive XL Laser Marking System stands out with: • Professional JPT MOPAfix fiber laser source with 20 or 30W power • 1064nm, 20–400 kHz (for perfect annealing) • "New Generation ECO" galvo scanning unit • 19" integrated PC control, no external card required! • Very large viewing window with certified laser safety glass • Approx. 150 x 150 mm scanning area • Electric height adjustment • Full enclosure with 4 casters • "Zero-gravity" lifting door for safe marking operations EZCAD III Software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder (matrix-based using 2 parameters) • TCP/IP connectivity for external components • Industry 4.0: Process and status monitoring via TCP/IP at any time • Input/Output ports for direct communication • Modern look & feel with intuitive interface • Even clearer and more intuitive operation • 3D preview for rotary axis applications • Up to 50% performance boost with 64-bit architecture Hjdpfx Aod S H Nxog Tei • Enhanced stability with integrated control card • Optional: Integrated control of up to 4 axes • Optional: Deep engraving with Z-axis • Optimized algorithms for fast hatching • Completely new generation of galvo design • Dual laser pointer for focus position verification • Integrated LED workspace lighting • Connection port for external extraction system • Start and emergency stop button on housing • USB and network access for data • Operating manual and user software in German • Protective enclosure compliant with laser class 1 • Includes 4 hours of training at our training center (max. 2 participants) Need customisation? No problem. Choose from a wide range of accessories: ⇒ Camera systems for object recognition ⇒ Fiber laser sources in almost all variants ⇒ Motorized and automatic height adjustment ⇒ Scanlab components ⇒ Automation for workpiece handling ⇒ Conveyor belts for infeed and outfeed ⇒ 3D marking and engraving function ⇒ Automatic focus adjustment ⇒ Rotational unit ⇒ Motorized linear slides ⇒ Interlock system for marking WITHOUT enclosure — using only PPE (personal protective equipment) for bulky parts Our engraving lasers can of course be customized for your specific requirements regarding design and size! ⇒ Made in Schweinfurt! Photos may show optional equipment! Laser engraving machine, laser marker, laser marking, laser marking system, laser engraving, laser engraver, laser marking machine, laser engraving system, marking laser, industrial laser, etc.

Stanje: rabljeno, Leto izdelave: 2014, Duplo Brochure Production System 5000 Offer includes: - 2x Collator Towers DC-10/60 - Transfer Unit LUL-HM - Stitching and Folding Unit DBM-500 - Front Trimmer DBM-500T - Batch Counter DBM-K - Long Delivery Stacker DBM-400LS Duplo System 5000 Brochure Production 2xDC-10/60: 20 stations - Paper format: min. 120x148mm; max. 350x500mm - Paper weight: 40-300gsm - Stack height: 60mm per station - Feeders: Suction/blowing air - Controls: Double-sheet, missing sheet, paper jam, empty station detection - Power supply: 230V, 50Hz, 4.5A, 1035W - Dimensions: 630mm x 750mm x 1972mm - Weight: 290kg DBM 500: Folding and Stitching Unit - Paper format: min. 120x170mm; max. 350x500mm - Speed: >5,000 pcs/h (A5) >4,600 pcs/h (A4) >4,000 pcs/h (A3) - Stitching capacity: 5mm (50 sheets, 80gsm) - Folding capacity: 25 sheets - Number of stitching heads: 2 - Controls: Paper jam detection, paper position display, wire end notification Hjdpfoymx Tbsx Ag Tei - Memory: 12 programs - Folding and stitching types: Section folding without stitching; saddle stitching/section folding; corner stitching/section folding; corner stitching; block/side stitching - Power supply: 230V, 50Hz, 5A, 1150W - Dimensions: 1610mm x 770mm x 1020mm - Weight: 412kg DBM 500T: Front Trimmer - Brochure format: min. 85x120mm; max. 250x356mm - Trimmed final format: min. 75x120mm - Speed: >5,000 pcs/h - Processing thickness: 50 sheets (80gsm) - Power supply: 230V, 50Hz, 3.3A, 759W - Dimensions: 700mm x 635mm x 1094mm - Weight: 241kg On request, we can organize the following services for you: Packaging, loading, transport (by sea or air) including customs clearance Requesting a leasing offer

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Return-Master 5920 povratni sistem, star 4 leta. Servisiran s strani vrhunske servisne ekipe Dimpex. Le resna povpraševanja! Hsdoyhpynepfx Ag Toi

Stanje: dober (rabljeno), Leto izdelave: 2023, Ta lakirna kabina se prodaja po naročilu stranke in jo je možno ogledati pod napetostjo. Hsdpfxeylm U Rj Ag Tei

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, številka stroja/vozila: PJ000016, (52 & 74 - SOFTWARE LICENSE FOR BOTH FORMATS) Type: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the type of plate used) Hedevw Afxopfx Ag Tsi Format: 52 & 74 with software license for both formats Plate sizes (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26,298.03 m² Plate counter: 81,600 pcs Imaging counter: 81,322 pcs Total material used: 27,988.8 m² Total plates: 86,417 pcs Total imagings: 86,220 pcs Total punchings: 86,524 pcs Total operating time: 85,165.82 hours Total exposure time: 3,053.96 hours Equipment / further information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic interleaf removal, external compressed air supply required XXX – extraction unit for the removal of plate particles Workstation MetaDimension 4/8-up Prinect SignaStation 1.5 74 Very good condition // Dismantling, packaging of the machine, and securing (insurance of the machine during transport) will be carried out by the manufacturer / Heidelberg.