Hermle Uwf 802 M nakup rabljenega (123)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control system HS, cycle-controlled, year of manufacture 1998, in very good original condition. This machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed X and Y: 2 to 1600 mm/min, stepless Feed Z: 2 to 1000 mm/min, stepless Rapid feed X and Y: 1.6 m/min Rapid feed Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable through 18 gear stages - Vertical milling head swivels right and left - Hydro-mechanical tool clamping (vertical and horizontal) - Automatic central lubrication - Coolant unit external - Control cabinet mounted to the machine - Fixed angle table - Operating manual and circuit diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight approx. 1,750 kg Ncsdpfx Anewyn Rqerow Accessories and equipment: - Operating manual, electrical diagrams - Machine feet About the machine: We are offering a Hermle UWF 802 M milling machine with NC control system HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine live under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Hermle UWF 802 M Hermle UWF 802 M with Heidenhain TNC 124 cycle-controlled NC control system, year of manufacture 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: - Travel distances X: 500 mm, Y: 430 mm, Z: 400 mm - Table size: 800 x 390 mm Nsdpezbrz Iofx Anrecw - Spindle taper: ISO 40 - Spindle speed: 71 to 3550 rpm, 18 steps - Feed rate X and Y: 2 to 1600 mm/min, stepless - Feed rate Z: 2 to 1000 mm/min, stepless - Rapid traverse X and Y: 1.6 m/min - Rapid traverse Z: 1 m/min - Spindle drive: 3 kW - Power supply: 400 Volt, 50 Hz - Spindle speed via 18 gearbox steps - Vertical milling head swivels to the right and left - Hydro-mechanical tool clamping (vertical and horizontal) - Automatic central lubrication - Separate coolant system - Control cabinet mounted to the machine - Fixed angle table - Operating manual and circuit diagram - Required floor space (L x W x H): 2000 x 1800 x 1950 mm - Weight: approx. 1750 kg Accessories and Equipment: - Operating manual, electrical diagrams - Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with Heidenhain TNC 124 cycle-controlled NC control, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. The slides move very smoothly and evenly. Even at high speeds, the Hermle runs extremely quietly. This newer generation of milling machines is particularly user-friendly. Take advantage of the opportunity to view this machine powered up on site and assess its condition for yourself.

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 430 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 3.550 obr/min, hitrost vretena (min.): 17 obr/min, For sale: Hermle CNC / conventional milling machine, model UWF 802 M Nsdsrvitljpfx Anrocw The machine is in good to very good condition and ready for immediate use. Technical Data: Year of manufacture: 1994 Control system: Heidenhain TNC 124 Clamping surface: Rigid angle table Spindle speed: 17 to 3550 rpm Feed: Infinitely variable Drive power: 6 kW Travel X: 500 mm Travel Y: 430 mm Travel Z: 400 mm Tool holder: SK40 Dimensions (L*W*H): 1800*1800*1900 mm Weight: 1.8 t Loading and transport can be organized within Europe upon request and at an additional charge. Prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Do you need a high-quality yet cost-effective metalworking machine for your production? Or are you looking to sell your equipment? For further information or contact options, please visit our website.

Stanje: nepreverjeno (rabljeno), Orodjarska rezkalna stroj HERMLE UWF 802 M - programsko vodenje HS 401 - Hodi X/Y/Z: 500x430x400 mm - Območje obratov: 18-3550 obr/min - Brezstopenjski pomik v vseh treh oseh - Hitri pomiki 0-1,6 m/min v vseh treh oseh - Vertikalno-horizontalna rezkalna enota - Orodni vpenjalni sistem ISO 40 - Hidravlično vpenjanje orodja - Centralno mazanje - Pogonska moč: 6 kW - Delovna luč - Posoda za ostružke - Dokumentacija Dimenzije: DxŠxV 1,9x1,8x1,9 m / Teža: 1900 kg Ncodpfx Asy Ddz Hsnrow Pridržujemo si pravico do napak ali vnosnih pomot

Leto izdelave: 1991, stanje: dober (rabljeno), Hermle UWF 802 M universal tool milling machine with Hermle HS path control system. The machine is in good, operational condition and can be demonstrated under power. Nsdpfsdubmkox Anrjcw

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Hermle UWF 802M with HS 401 Path Control – Excellent Condition! Technical Data: >> Year of manufacture: approx. 1994 – Machine No. 10525 >> Fixed angle table >> Spindle speed: 17 to 3550 rpm >> Infinitely variable feed in 3 axes: 0 to 1,600 mm/min >> Drive power: 6 kW >> Travel X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill – SK40 >> Hydraulic clamping system >> Weight: approx. 1,800 kg >> Dimensions: Length 1.8 m, Width 1.8 m, Height 1.9 m Accessories and Features: >> HS 401 path control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual and programming examples Nsdjw Sv Iaopfx Anrjcw About the Machine: For sale is a Hermle UWF 802M tool milling machine with HS401 path control. This universal milling machine is in excellent condition. The control system is very user-friendly; length and radius corrections are possible within the program, requiring no advanced CNC knowledge. Of course, the Hermle can also be operated manually, without the control. The machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple via folding away the vertical head. The guides are automatically lubricated by central lubrication. The Hermle has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Hermle under power at our facility.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Hermle UWF 802M with HS 401 Path Control - Excellent CONDITION!! Technical Data: >> Year of manufacture: approx. 1995, Machine No. 10212 >> Fixed angle table >> Spindle speed: 17 to 3550 rpm >> Stepless feed on 3 axes from 0 to 1600 mm/min >> Drive power: 6 kW >> Travel X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight: approx. 1800 kg >> Dimensions: Length 1.8 m, Width 1.8 m, Height 1.9 m Accessories and Equipment: >> HS 401 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication Nedpev Ed U Dofx Anrscw >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual and programming examples About the machine: For sale is a Hermle UWF 802M universal milling machine with HS401 path control. This universal milling machine is in very good condition. The path control is very easy to operate. Length and radius corrections can be made in the program. No extensive CNC knowledge is required for this. Of course, the Hermle can also be operated manually without control. Furthermore, the machine is equipped with hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very straightforward by folding away the vertical head. The guideways are regularly lubricated via the central lubrication system. The Hermle has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Hermle under power at our facility.

Stanje: rabljeno, Leto izdelave: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm Total power requirement 6.3 kW Machine weight approx. 2 t Space requirement approx. 7.36 m² O F F E R We can offer you, subject to prior sale and errors, ex-stock on a non-binding basis: H E R M L E CNC-controlled Universal Tool Milling Machine with 4th axis Ncodjt Hxbwopfx Anrow Model UWF 600 CNC ( HDH TNC 355 ) Year of manufacture 1990 # 8637 Table travels: longitudinal X 400 mm vertical Z 350 mm Cross travel Y 330 mm Table size 630 x 335 mm Spindle taper SK 40 Spindle speeds in 3 ranges Vertical / Horizontal 40 – 6,000 rpm Quill stroke Vertical 63 mm Feeds, infinitely variable 1 – 2,000 mm/min Feed force 4,800 N Rapid traverse 5,000 mm/min Spindle drive 3.5 kW Total connected load 6.3 kW - 380 V - 50 Hz Weight 2,000 kg Accessories / Special equipment • HEIDENHAIN 4-axis contour control Type TNC 355 with graphics and various subprograms, mobile electronic handwheel • Fixed angular table installed, fitted with CNC dividing head by HOFMANN with RÖHM three-jaw chuck 160 mm dia., center height approx. 125 mm, possibly also tiltable. Resolution 0.001° (dividing head can also be removed!) • Vertical head easily swivels away for use of the horizontal spindle • Hydraulic tool clamping in the V-spindle, 5 various arbor holders • Free-standing control cabinet, free-standing coolant facility • Central lubrication, ampere meter, etc. An ideal machine for toolmaking and electrode production Condition: good – ready for demonstration, HDH control computer was replaced Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice Further conventional and CNC milling machines by DECKEL, MAHO, MIKRON or HERMLE as well as other renowned manufacturers available from stock! Please contact us.

Stanje: dober (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of Manufacture: 1983 Control System: Positioning and traversing control including monitor HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working Range X-axis (longitudinal) manual/automatic 410/390 mm Y-axis (transversal) manual/automatic 310/290 mm Z-axis (vertical) manual/automatic 400/380 mm Vertical quill travel 63 mm Clamping area vertical 830 x 224 mm Number of T-slots 4 Swivel table clamping area 700 x 285 mm 6 T-slots 12 H8/45 mm Workpiece weight 200 kg Distance table to spindle nose (vertical) 0 – 515 mm Distance table to spindle centre (horizontal) 30 – 565 mm Drive power (at 1500 rpm) 2.2 kW Speed range 45 – 2000 rpm Number of speeds 12 Speed increment (geometric progression) 1.4 Tool holder (DIN 2079) ISO 40 Feed range (all axes) 2 – 1500 mm/min Nedpfx Ansx Ry Atjrscw Rapid traverse (all axes) 1.5 m/min Operating voltage 380 V / 50 Hz Machine dimensions 1.2 x 1.6 x 1.7 m Required space 2.1 x 2.1 m Machine weight 1100 kg EQUIPMENT/ACCESSORIES  Operation by hand and via CNC program  Vertical and horizontal machining  Swivelling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual vertical quill feed  Swivel table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in working area  Setup elements  Machine lamp  Documentation Condition: Control system overhauled, workshop-tested

Stanje: rabljeno, Leto izdelave: 1989, Tehnične podrobnosti: X-gib: 850 mm Y-gib: 630 mm Z-gib: 500 mm Vreteno ISO: 40 Območje vrtljajev vretena za obdelavo: 25 – 4200 vrt/min Površina mize: 560 x 1200 mm Nsdpjzn N Rxjfx Anrscw Skupna potrebna moč: 15 kW Masa stroja: približno 4 t Potreben prostor: približno 4,3 x 4,4 x 2,3 m z CNC krmiljenjem HEIDENHAIN TNC 415 Sistem za odvajanje sekancev različne držala za orodja *

Stanje: rabljeno, Leto izdelave: 1988, Werkzeug-CNC-Fräsmaschine HERMLE Typ UWF 1000 CNC Baujahr: 1988 Verfahrwege X: 700 mm Verfahrwege Y: 550 mm Verfahrwege Z: 500 mm Numerik-Steuerung: HEIDENHAIN TNC 155 Spindelaufnahme: ISO 40 Spindel: Ø 70 mm Spindeldrehzahl: von 25 bis 3.150 U/min Tischgröße: 1.000 x 500 mm Vertikalpinolenhub: 100 mm Schwenkkopf Spindelmotor: 6,9 kW Ncjdszm Sphepfx Anrjw Gewicht: 3,3 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, potovalna razdalja osi X: 700 mm, pomik osi Y: 630 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 426, največja hitrost vretena: 4.200 obr/min, število osi: 3, Ta 3-osna obdelovalna naprava tipa HERMLE UWF 1002 H je bila izdelana leta 1995. Ima delovni hod 700 mm v osi X, 630 mm v osi Y in 500 mm v osi Z. Nosilnost mize naprave je 700 kg, površina mize pa znaša 1000 x 490 mm. Če iščete visokokakovostne možnosti obdelave, razmislite o vertikalnem obdelovalnem centru HERMLE UWF 1002 H, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. - Delovna napetost: 400 V / 3~ - Nadzorna napetost: 24 V DC / 220 V AC - Frekvenca: 50 Hz - Nazivni tok: 33 A - Skupna moč: 23 kVA (z IKZ) / 21 kW - Delovni hod osi X: 700 mm - Delovni hod osi Y: 630 mm - Delovni hod osi Z: 500 mm Nedpjzk Inbefx Anrocw - Neto teža: 6.800 kg - Nosilnost mize: 700 kg - Površina mize: 1.000 x 490 mm - Prostornina rezervoarja za hladilno tekočino: 240 litrov - Pretok / tlak hladilne tekočine: 20 l/min / maks. 4 bar - Električna številka risbe: HS 460-2 - Serijska oprema: Kabina s popolno zaščito, 5-osno upravljanje konture, postelja stroja in prečna letva iz litega železa / kompozitne konstrukcije iz mineralnega litega železa, toplotni izmenjevalnik v električnem ohišju, brezkrtačni asinhroni motorji, osvetlitev delovnega prostora - Aktualne napake/težave: Motor-enkoder Z: prenizka amplituda

Stanje: dober (rabljeno), Univerzalni orodjarni rezkalni stroj HERMLE UWF 801, št. 5798, nadzorni sistem HEIDENHAIN HS 144, območje giba: 500 × 430 × 400 mm, vreteno: SK40, vreteno do 2.000 vrt/min. Ncjdpfx Ajznlzmjnrow

Stanje: rabljeno, Leto izdelave: 1996, X-hod: 850 mm Y-hod: 630 mm Z-hod: 500 mm Krmilnik: Heidenhain TNC 426 Hitri pomik: 10 m/min Mere mize: 1.200 x 550 mm Število obratov vretena: 20 - 4.200 min⁻¹ Moč vretenskega motorja: 7 kW Ncjdpfx Ansy Dh U Dersw Vpenjalo orodja: SK 40 Po naši oceni je stroj v dobrem rabljenem stanju in si ga je mogoče po predhodnem dogovoru ogledati pod napetostjo. Tehnične značilnosti in dodatna oprema: - Delilna glava, 4. os Dodatki, prikazana orodja in vpenjala so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do vmesne prodaje!

Stanje: rabljeno, Leto izdelave: 1995, CNC rezkalni stroj, univerzalni Proizvajalec: HERMLE Tip: UWF 902 S Letnik: 1995 Delovnih ur: 65.071 Krmilnik: HEIDENHAIN TNC 426 Delovno območje X/Y/Z: 600 x 450 x 500 mm Območje vrtljajev: 20 – 6.300 vrt/min Vpenjalno mesto orodja: SK 40 3D tipalo M & H (za nastavitev obdelovanca) Navpično-vodoravno rezkalna nastavitev Vreteno za vrtanje Naprava za hlajenje Kotna miza: 900 x 458 Teža: 4.000 kg Ncodpfxev Rxa So Anrjw Dimenzije stroja: D x Š x V, pribl.: 3.900 x 2.000 x 2.000 mm ä22726

Stanje: rabljeno, Leto izdelave: 1995, CNC-stružnica, univerzalna Proizvajalec: HERMLE Tip: UWF 902 H Letnik: 1995 Delovnih ur: 46.680 Nadzorna enota: HEIDENHAIN TNC 426 Hodi osi X/Y/Z: 600 x 450 x 500 mm Njdsv Rpr Sjpfx Anrocw Naključna miza: 900 x 458 mm 3D tipalo Renishaw Območje vrtljajev: 20 do 6.300 vrt/min. Vpenjalno orodje: SK 40 Posoda za hladilno tekočino Moč pogona: 8,6 kW Približna teža: 4.500 kg Dimenzije stroja (D x Š x V): približno 2.950 x 2.200 x 2.300 mm 22726

Stanje: rabljeno, Pomiki in osi • X-os (vzdolžna): 600 mm • Y-os (prečna): 400 mm • Z-os (vertikalna): 420 mm Delovno vreteno • Območje vrtljajev: 20 do 4.000 min⁻¹ • Orodno vpenjalo: SK 40 (ISO 40) • Glava za rezkanje: ročna • Pogonska moč vretena: pribl. 6 – 7 kW Delovna miza • Vpenjalna površina: 900 x 460 mm • Najv. obremenitev mize: 400 kg • T-utori: 7 kosov (standard 14 mm H7, razmak 63 mm) Pomiki in hitrosti • Delovni pomik (X/Y/Z): 1 do 5.000 / 6.000 mm/min • Hitri pomik X- in Y-os: 7 m/min • Hitri pomik Z-os: 6 m/min Električni priključki in mere • Skupna priključna moč: pribl. 12 – 13 kW Ncjdpfszh Evwox Anrsw • Teža stroja: pribl. 2.300 kg • Potreben prostor (DxŠxV): pribl. 4,0 x 3,8 x 2,0 m Krmiljenje • CNC krmilje: Heidenhain HS412 Tehnični podatki brez garancije Stroj je popolnoma delujoč in v dobrem stanju.

Stanje: dober (rabljeno), Leto izdelave: 1991, Krmiljenje: Heidenhain TNC 407 Pomik osi: X= 600, Y= 400, Z= 420 mm Območje vrtljajev: 20 – 4000 obr/min Njdpfx Aswvif Uenrjcw Stopenj prenosa: 3 Vpenjanje: SK 40 Hod pinole: 75 mm Motor vretena: 5,9 kW Območje podajal: 1 – 5000/6000 mm/min (ročni/programski način) Hitri pomik x, y: 7 m/min Hitri pomik z: 6 m/min Vpenjalna površina: 900 x 458 mm Teža: pribl. 2300 kg Z napravo za hlajenje, elektronskim ročnim kolesom, merilna sonda (okvarjena)

Stanje: dober (rabljeno), Leto izdelave: 1983, potovalna razdalja osi X: 410 mm, pomik osi Y: 310 mm, pomik po osi Z: 400 mm, Commande : Commande de positionnement et de déplacement incl. écran HEIDENHAIN TNC 135 Commande manuelle 3 axes DONNÉES TECHNIQUES Domaine de travail Axe X (longitudinal) manuel/automatique : 410/390 mm Axe Y (transversal) manuel/automatique : 310/290 mm Axe Z (vertical) manuel/automatique : 400/380 mm Ncedpfxsht Hbus Anrsw Course de broche verticale : 63 mm Surface de serrage de la table angulaire : 700 x 285 mm Puissance d'entraînement (à 1500 tr/min) : 2,2 kW Plage de vitesses : 45–2000 tr/min Nombre de vitesses : 12 Pas d'étagement (progression géométrique) : 1,4 Porte-outil (DIN 2079) : ISO 40 ÉQUIPEMENT/ACCESSOIRES - Commande manuelle et par programme CNC - Usinage vertical et horizontal - Tête de fraisage verticale orientable - Tête de fraisage verticale à angle réglable - Avance manuelle de la broche verticale - Table angulaire - Dispositif de refroidissement - Bac à liquide de refroidissement et à copeaux - Carters de protection contre les projections de copeaux dans la zone de travail - Éléments de calage - Documentation

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, potovalna razdalja osi X: 600 mm, pomik osi Y: 400 mm, pomik po osi Z: 420 mm, Krmiljenje je okvarjeno, sicer je deloval brezhibno. Ncjdszhulhspfx Anrew

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 700 mm, dolžina pomika po osi Y: 550 mm, dolžina podajanja os Z: 550 mm, potovalna razdalja osi X: 700 mm, pomik osi Y: 550 mm, pomik po osi Z: 550 mm, HERMLE UWF 1001 CNC rezkalni stroj S CNC krmiljenjem, HEIDENHAIN / Tip: TNC 155 Nsdpfx Aszcmz Eonrjcw Merilna sonda / Hladilni sistem / Odvajanje odrezkov Ohišje / Kabina / Električna omarica: 1260 x 500 x 1700 mm Pomiki osi 700 x 550 x 550 mm / Površina vpenjalne mize 1000 x 490 mm

Stanje: rabljeno, Leto izdelave: 1996, Technical Details: X-axis travel: 600 mm y-axis travel: 450 mm z-axis travel: 400 mm Control: Heidenhain TNC 425 Spindle taper ISO: SK 40 DIN 69871 Quill stroke vertical: 75 mm Distance column to table edge: 190 mm (fixed) vertical Spindle head swivels left and right: 90° vertical spindle Distance spindle/table min./max.: 165/565 mm vertical spindle Distance spindle/table min./max.: 165/565 mm horizontal spindle Spindle speed range: 20 ... 4500 rpm Ncjdpfxsu Nc T Re Anrjw Tool magazine with: 32 tools (type HTC 32) Feed rate: 1 ... 5000 mm/min Table size: 850x440 mm Swivelling table +/-: no = fixed Table load capacity: 500 kg Total power requirement: 15 kW Weight approx.: 3500 kg Machine dimensions approx. LxWxH: 2.5 x 3.0 x 2.1 m Control cabinet dimensions LxWxH: 1.6 x 0.6 x 1.7 m Equipment: - Coolant tank, capacity 100 litres, flow rate 16 l/min - Control panel with extension arm - Electronic handwheel - 8 machine feet

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm Spindle taper ISO: SK 40 Control: Heidenhain TNC 360 Quill stroke vertical: 75 mm Speed range: 20 ... 4000 rpm Spindle head swivels left and right: 90° left / right Feed rate X/Y/Z: 1...6000 mm/min Rapid traverse X/Y: 7 m/min, Z: 6 m/min Nsdju Nc U Ijpfx Anrscw Table size: 900 x 460 mm Table load capacity: 400 kg Weight approx.: 2300 kg Machine dimensions approx. LxWxH: 4.0 x 3.8 x 2.0 m Total power requirement: 13 kW Equipment: - Separate manufacturing cell - Coolant system - Operator panel with articulating arm, swiveling - SK 40 Heidenhain TS 120 touch probe - Oil collection tray

Stanje: rabljeno, Leto izdelave: 1996, Technical details: X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 400 mm Spindle taper: IBAG SKI 25 Control: Heidenhain TNC 425 Vertical quill stroke: unknown mm Speed range: 2,400 – 24,000 rpm Feed rate: 1 ... 5,000 mm/min Table clamping surface: 850 x 440 mm Table swiveling +/-: fixed ° Table load: 500 kg Tool holders / stations: 32 places for IBAG SKI 25 Approx. weight: 3,600 kg Machine dimensions approx. (L x W x H): 2.5 x 3.0 x 2.1 m Control cabinet dimensions: L: 1,550 x W: 550 x H: 1,700 mm Universal milling and drilling machine - with IBAG high-frequency spindle type HF 100A-30/24 Nedpfx Anou Nc Uherjcw - Milling spindle taper IBAG SKI 25 with IBAG pull stud - Coolant tank, delivery rate 16 l/min and 100 liters capacity Accessories: - 3D probe Heimer for IBAG milling spindle - Tool holders/collets IBAG, subject to availability - Electronic handwheel as per manufacturer.

Stanje: rabljeno, Leto izdelave: 1994, X-hod 850 mm Y-hod 630 mm Z-hod 550 mm Vpenjalna površina mize 1200 x 550 mm Vpenjanje vretena SK 40 Število vrtljajev vretena 20 - 4200 vrt/min Moč motorja vretena 11,5 kW Hod pinole 95 mm Pomik - vzdolžno/prečno/navpično 1 - 10.000 mm/min Ncsdpfxjy Nnxaj Anrjw Hitri pomik vzdolžno in prečno 10 m/min Hitri pomik navpično 10 m/min Krmilnik HEIDENHAIN, TNC 426 Skupna potrebna moč 21 kW Teža stroja ca. 6 t Dodatki: NC delilni aparat (= 4. os) z luneto, proizvajalec HOFMANN, RWNC-160; preklopna vertikalna glava s hidravličnim vpenjalnikom orodja in izvlečno pinolo, fiksna miza, elektronski ročni obroč, hladilna naprava