Hakomatic B 655 S nakup rabljenega (95.049)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Oprema: odsesavanje prahu, Gre za odpraševalno napravo z eksplozijskim certifikatom za konopljin prah. Naprava je vgrajena in cena vključuje vse dele. Cgsdpoxpm Ausfx Aa Sjn

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Horizontal Bandsäge H+S 2600x600 mm Baujahr: 2004 Preis: 1.750 Euro Ansprechpartner: Herr Rainer Eckerle Cgsdpein Nn Isfx Aa Ssn

Stanje: rabljeno, B&R Acopos 1090 Servo Drive 8V1 removed from Engel Robot ERC-6510-E Cgsdpfsiyzwwsx Aa Ssn - Removed from an operational machine - Fully functional Manufacturer: B&R Model: 8V1090 Manufacturer No.: 8V1 Spare part No.: Please ensure before purchasing that the Acopos you require also has a 12-pin green connector. If the spare part is traded on an exchange basis, a partial credit will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse credit based on the condition or age of the returned part. The defective part must be in repairable condition; credit will be issued upon feedback from the manufacturer. Condition: used

Stanje: rabljeno, B&R Servo Motor 8LSA57.E1045D NN = 4500 rpm - UN = 400V - Removed from Battenfeld VM75/60V/60V R1040 - Removed from a running machine Cgedeimw S Aspfx Aa Sen - Fully functional Manufacturer: B&R Type: 8LSA57.E1045D000-0 Condition: used

Stanje: rabljeno, B&R Acopos 1045 Servo Amplifier 8V1 removed from Engel Robot ERC-6510-E - Removed from an operational machine - Fully functional Manufacturer: B&R Cedpeiyzw Eefx Aa Sjgn Model: 8V1045 Manufacturer No.: 8V1 Spare part No.: Please ensure before purchase that the Acopos you require also has a 12-pin green connector. If the spare part is handled via an exchange procedure, a partial credit will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit due to the condition or age of the returned part. The defective part must be in a repairable condition; the credit will be issued following manufacturer feedback. Condition: used

Stanje: rabljeno, B&R Acopos 1016 Servo Amplifier – removed from Remak RX43 - Removed from a running machine Codpfx Aajrr Egaj Sjgn - Fully functional Manufacturer: B&R Type: 1016 Manufacturer No.: 8V1 Rev. H0 Please ensure before purchasing that the Acopos unit you require also has an 18-pin grey connector. If the spare part is supplied on an exchange basis, a partial credit will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse the credit depending on the condition and/or age of the returned part. The defective part must be repairable; the credit will be issued upon feedback from the manufacturer. Condition: Used

Stanje: rabljeno, B&R / 8V1 Acopos 1022 servo amplifier – refurbished - 3-month warranty: This is provided exclusively based on manufacturer inspection. Processing is carried out by Complast GmbH. - Removed from an operational machine - Fully functional Manufacturer: B&R Type: 1022 Cgedpfep Rb Iajx Aa Sjn Manufacturer No.: 8V1 Please ensure before purchasing that the Acopos you require also has a 12-pin green connector. If the spare part is traded on an exchange basis, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note based on the condition and/or age of the returned part. The defective part must be in repairable condition; the credit note will be issued after confirmation from the manufacturer. Condition: refurbished

Leto izdelave: 2020, Stanje: novo, T-Shape 3-in-1 Multisystem // Year of manufacture: 2020 The T-Shape combines three powerful technologies that act simultaneously to promote collagen production while significantly reducing local fat volume and improving skin elasticity. It delivers deep and immediate enhancement of blood circulation and lymphatic drainage, resulting in improved physical fitness. - Skin tightening - Cellulite reduction Cjdperxri Ssfx Aa Sjgn - Reduction of fat deposits - Circumference reduction - Post-liposuction treatment - Facial lifting and skin tightening RF (Radio Frequency) T-Shape generates bipolar, quadripolar and hexapolar radio frequency signals. The contact between RF energy and tissue impedance generates heat. When adequately heated, the collagen-rich dermis immediately denatures, with fibrils contracting and thickening. As a reaction to the initial heating, new collagen is produced and the skin appears firmer, denser, and younger. Vacuum Suction T-Shape features a vacuum treatment technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to enhance local blood flow and stimulate lymphatic drainage. It promotes fibroblast activity and supports vasodilation. LLLT Laser By irradiating adipose tissue, the LLLT laser helps create temporary micropores in fat cells and accelerates the breakdown of triglycerides into glycerol and fatty acids, which can escape the cell and reduce its volume. The released lipids are eliminated through normal metabolic processes. LLLT effectively reduces body circumference by targeted application and has also proven effective in reducing edema. Technical data Supply voltage: 220/230 Vac, 50/60 Hz Power consumption: 1300 W Weight: 45 kg Dimensions: 348 x 513 x 1008 mm Low-Power Laser wavelength: 760 nm Laser class: 3R Laser density: 8 MW/cm² Frequency of bipolar high-frequency signal: 1500 kHz (1.5 MHz) Maximum RF output: Less than 25 W Maximum suction value: Less than 80 kPa (0.8 bar) Item condition: used, good condition More items – new and used – can be found in our shop! International shipping costs on request!

Stanje: rabljeno, System: Mobile chamber filter press, dewatering unit, sludge treatment plant, used Application areas: Chamber filter press, mobile dewatering, interim dewatering Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate size: 1200x1200 mm Number of plates: 103 Filter plates: PP (polypropylene) Cake thickness: 30 mm Filter cloths: optionally available, customisable to the medium Filter area: approx. 230 m² Press volume: approx. 3550 dm³ Filtration pressure: approx. 15 bar Cgjdpfx Aaernnt Ij Ssn Plate shifting: automatic Pump technology: optional Switch cabinet: yes Discharge: via discharge screw conveyor Mounted on: semi-trailer Purchase or rental: Inspection of the units possible at our facility by arrangement.

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 7.120 mm, skupna širina: 1.020 mm, skupna višina: 800 mm, TAF-številka artikla: 1000003853 Proizvajalec: S-Serv Letnik izdelave: 2018 Skupne mere: pribl. 7.120 x 1.020 x 800 - 1.100 mm Širina z robom: 900 mm Višina roba: 90 mm Širina z pogonom: 1.020 mm Transportna dolžina: 7.070 mm Transportna širina: 800 mm Cjdpfx Ajr D Ntqea Sjgn Tip traku: PVC, gladek Širina traku: 800 mm Podkonstrukcija: vključno s podporniki H: 800 do 1.100 mm Pogon: čelni pogon Motor: motor z reduktorjem Podatki o motorju: SEW, 0,12 kW, 50-60 Hz, 230-400 Volt Transportna hitrost: 0,1 m/s, konstantna Posebnosti: vključno s stranskim vodilom, H: 40 mm Stanje: Rabljeno / popolnoma funkcionalno Funkcionalni preizkus: OK

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Na prodaj so delujoči in zelo dobro ohranjeni dvogorivni gorilniki olje/plin znamke Weishaupt RGL40/1-B (2550 kW), vključno s plinsko armaturo Dungs DN 65, letnik 2001, s krmilno omaro. Cgsdpfswgk Raex Aa Sen Weishaupt RGL40/1-B (2550 kW) - Moč: 450-2550 kW - 45-215 kg/h - Izvedba: ZM - Priključni tlak: 15-500 mbar

Stanje: rabljeno, prevoženi kilometri: 106.050 km, moč: 120 kW (163,15 KM), prva registracija: 11/2020, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: rumena, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 2, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, navigacijski sistem, Internal vehicle number: 6556D ---- Why autonext GmbH? ---- One of the largest commercial vehicle exhibitions nationwide Always over 400 vehicles immediately available Largest selection - Best price More than 1000 satisfied customers per year - Top customer reviews WhatsApp Chat: ### Offer: Financing from 4.99% ### ----- * Good condition, 1 previous owner, German vehicle, non-smoker vehicle * Fully serviced exclusively at Mercedes Benz * Brake pads front and rear as new * On request, we can retrofit a towbar for only €599 * 7G-TRONIC Plus automatic transmission * Sliding door left * Sliding door right * Sliding doors on both sides * Navigation for MBUX multimedia system (10.25" touchscreen) * MBUX multimedia system (10.25" touchscreen) * Instrument cluster with color display * DAB tuner (digital radio reception) * Electrically foldable exterior mirrors * Exterior mirrors with Blind Spot Assist * Cruise control (speed control system) * Comfort driver's seat with armrest * Armrest for passenger * High wooden side paneling in loading/passenger compartment (up to ceiling) * Wooden floor in load compartment * Chassis: Stabilization Level I Cgedpfx Aaevu U Igs Sen * Entry handle on right rear pillar * 13-pin trailer socket * Front cup holder * Folding cover for storage compartment * Cable duct on side wall * Spare wheel mounted with running tires * Spare wheel holder under frame end incl. jack * Sliding door in loading/passenger compartment left * Fleece battery 92 Ah * Engine 2.1 l - 120 kW CDI * Wheelbase 3250 mm * Low emissions according to Euro 6 standard * Permissible gross vehicle weight 3.5 t * General inspection/emissions test new on request ---- Warranty & "TÜV Profi Check" are of course available from us! We are happy to accept your vehicle in part exchange! We will also prepare an individual financing or leasing offer for you! No down payment, redeemable at any time and with special repayment options. Please let our sales team know your requirements, we are happy to advise you. ---- Make an appointment for a test drive and let our vehicle quality convince you. Appointments: Mon.-Fri. from 08:30 - 18:00, Sat. from 09:30 - 13:30 ---- Visit us also on . We look forward to seeing you! ---- Errors and changes excepted. The equipment shown online does not constitute part of the contract. The specifications must be inspected on site.

Leto izdelave: 1988, Stanje: zelo dobro (rabljeno), New arrival Hydraulic surface grinding machine Z&B Ziersch FS 2045 T, year 1988 Grinding area: 500 x 200 mm – vertical feed – micron setting – feed via electronic handwheel – automatic feed – digital display. Automatic crossfeed, both continuous and intermittent. Micro-fine cross adjustment – magnetic chuck with demagnetization Hydraulic overhead dresser – leveling feet – machine fully checked – all functions present – runs very smoothly! Cgodpfxek Ufz Nj Aa Sjn Price: ex stock – subject to prior sale and errors.

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200 mm, hose length: 2500 mm, machine dimensions (L/W/H): approx. 1500 mm / 1000 mm / 1800 mm, weight: approx. 650 kg. Documentation is available. Inspection on site is possible. Cedpfjwfg E Djx Aa Sogn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, A complete combined rotogravure and immersion roller line for wallpaper rolls (Chadwick) is available. Working width: approx. 560 mm, substrate: paper/nonwoven, printing process: water-based gravure, print units: 7, technical speed: 180 m/min, practical speed: 140 m/min, production output: approx. 13,000–15,000 rolls/24h. 1) Unwinder Windmöller & Hölscher 892C, year: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Underlay paper unwind and gluing station. 4) Draw station Lenze. 5) 2x cold embossing stations Saueressig, year: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8 m. 7) Double roller cooling station. 8) Web inspection system WV-Star 500, year: 2016. 9) Alignment and cutting unit Saueressig 200440Y, label: G9, year: 1989. 10) Automatic roll packer Ritter. 11) Turnover station Saueressig 201482Y, year: 1989. 12) Inclined belt conveyor, working width: approx. 1000 mm, length: approx. 3000 mm. 13) Centralised air supply and exhaust unit SitVerba, year: 2016, supply fans: 7, exhaust fan: 1. The entire line was comprehensively modernised in 2016 with new direct drives, drive control, plant control system, switch cabinets, piping, process air technology, etc. Documentation available. Inspection on site is possible. Cgjdpfx Aaowqqv De Sen

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 8.596 h, nosilnost: 8.000 kg, dvižna višina: 3.300 mm, vrsta goriva: dizel, tip droga: dupleks, gradbena višina: 2.965 mm, vrsta pogona: Diesel, Sideloaders ISO Class: ISO Class 4 = 5,000 - 10,000 kg Csdpfev Ntwiox Aa Ssgn Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good

Leto izdelave: 2024, Stanje: novo, max. cutting height - ø 340 mm min./max. cutting width: 80 - 250 mm min./max. side board: 18 - 80 mm max. cutting length: 6,000 mm feed rate: 5 - 30 m/min saw motors: 2 x 55 kW feed motor: 4.0 kW width adjustment motor: 0.55 kW infeed roller motor: 0.75 kW weight: 8,000 kg Special features: Synchronously adjustable laser infeed table extension up to 8,000 mm automatic width adjustment with 6 fixed positions equipment for 1,000 mm diameter blades motor-driven log turning device electronic braking system Cgodpfxeu Izko Aa Son

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S-CL-250-FN-EC, vhodna napetost: 230 V, skupna masa: 35 kg, skupna širina: 430 mm, skupna dolžina: 340 mm, skupna višina: 600 mm, volumenski pretok: 250 m³/h, Oprema: Na voljo je tipska ploščica, ISI S-CLEANER Mechanical Air Filtration Unit (Solder Fume) for up to 2 workstations Type: 250 FN Version: Mobile Control: none Horizontal, mobile mechanical air purifier with EC radial fan for the filtration of solder fume. TECHNICAL DESCRIPTION: Airflow: - 240 m³/h (nominal airflow) - 170 m³/h (effective air output) (depends on filter configuration, without extraction hoods) Suction ports: 2 x NW 50 mm (rear) Cedpfx Aasvrylfj Sogn Filter configuration: - Prefilter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Colour: RAL 7035 light grey (custom colour on request) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Airflow output: not adjustable Dimensions: Length 340 mm / Width 430 mm / Height 600 mm Weight: 35 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S-CL-100-FN-EC, vhodna napetost: 230 V, skupna masa: 17 kg, skupna širina: 250 mm, skupna dolžina: 250 mm, skupna višina: 475 mm, volumenski pretok: 134 m³/h, Oprema: Na voljo je tipska ploščica, ISI S-CLEANER Mechanical Air Filtration Unit (Solder Fume Extraction) For up to 1 workstation Type: 100 FN Design: Semi-mobile (glide skids / no castors) Control: none Horizontally oriented, semi-mobile mechanical air purifier with EC radial fan for extracting soldering fumes. TECHNICAL SPECIFICATION: Airflow: - 134 m³/h (air volume) - 100 m³/h (effective air output) (depending on filter configuration, without extraction elements) Inlet connection: NW 50 mm (rear) Filter configuration: - Pre-filter - HEPA filter H13 - Activated carbon cassette (refillable) Colour: RAL 7035 light grey Cgodjwpu Twjpfx Aa Sjn Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-efficient EC technology Airflow: not adjustable Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Stanje: rabljeno, 1x FVE 90/0160 1100x300H B=200 8D 7x FVE 350/0500 1400x400H B=500 20D 1x FVE 260/0500 1600x400H B=500 20D 1x FVE 1120/0850 2900x650H B=850 Vibrator tip 1000 1x FVE 175/0400 1200x350H B=400 8D 1x FVE 280/0500 1400x400H B=500 20D 1x FVE 280/0500 1400x400H B=500 20D Cgsdpfx Aswu Tdxea Ssn

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 8LSA44.E3030D000-0 Csdpfx Aaeufxvkj Ssgn IN 2,8A – MN 4,6Nm – NN 3000 min⁻¹ – IP64 – I0 3,7A M0 6,0Nm – UN 400V AC Serienummer: 75480235523

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AS4002/10, Dieser Brennofen wurde vom italienischen Hersteller SITI gefertigt und ist für das Brennen von Sanitärkeramik geeignet. Die garantierte Brenntemperatur liegt bei 1220-1230 °C. Er kann auch für das Nachbrennen (Korrekturbrennen) von Sanitärkeramik verwendet werden. Der Brennofen wird mit 10 vollständigen Ofenwagen geliefert, die mit hitzebeständigen Zubehörteilen ausgestattet sind. Zusätzlich sind ein manueller Verschiebewagen für die Ofenwagen sowie ein hydraulischer Hubtisch zum Beladen der Stücke enthalten. Weiterhin gehören vier Edelstahl-Abzugsschornsteine zum Lieferumfang. Der Ofen war drei Jahre in Betrieb und wurde im Jahr 2021 fachgerecht demontiert. Er befindet sich derzeit eingelagert in Ludinovo, Region Kaluga, Russland. Cgedpfx Aasu S E Umj Ssn

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, proizvajalec krmilnikov: Klöckner-Möller und SPS-Siemens, dolžina obdelovanca (maks.): 2.500 mm, teža obdelovanca (maks.): 50 kg, višina zlaganja: 1.200 mm, Auction of a Feeding and Stacking System for the Furniture Industry! Bargstedt TBH20/ER/25/08/S (Single-sided Feeding Station, Machine No. 0-280-07-7582) - 1 driven stacking roller conveyor - 1 lifting table with driven stacking roller conveyor - 1 vacuum suction carriage (minimum workpiece size 280 x 230 mm) - 1 stripping wall - 1 central thickness adjustment for the suction carriage - 1 belt conveyor with lifting and lowering function - 1 infeed roller track with inclined supporting rollers - Suction traverse (2-lane operation, maximum 4 parts in a row) TECHNICAL DETAILS - Stacking height: 1200 mm - Stacking change time: 35 sec - Base throughput max.: 17 cycles/min - Maximum workpiece weight: 50 kg - Maximum workpiece length: 2,500 mm MACHINE DETAILS - Controls: Klöckner-Möller and Siemens PLC - Total connected load: 14 kW - Compressed air consumption: 81 NL/min - Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turntable station from longitudinal to transverse, Machine No. 0-282-07-7584) TECHNICAL DETAILS - Roller diameter: 65 mm - Roller pitch: 125 mm - Maximum workpiece weight: 50 kg - Feed rate: steplessly adjustable from 10 - 50 m/min MACHINE DETAILS - Total connected load: 2 kW - Air consumption: 27 NL/min - Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turntable station from transverse to longitudinal, Machine No. 0-282-07-7585) TECHNICAL DETAILS - Roller diameter: 65 mm - Roller pitch: 125 mm - Maximum workpiece weight: 50 kg - Feed rate: steplessly adjustable from 10 - 50 m/min MACHINE DETAILS - Total connected load: 2 kW - Air consumption: 1 NL/min Bargstedt TSH20/ER/25/08/S (Single-sided Stacking Station, Machine No. 0-281-07-7589) - 1 lifting and lowering single-sheet transport - 1 vacuum suction carriage (minimum workpiece size 280 x 230 mm) - 1 central thickness adjustment for the suction carriage, adjustable to board thickness for take-over - 1 lifting table with driven stacking roller conveyor - 1 driven stacking roller conveyor, installed behind the stacking station - Suction traverse (2-lane operation, maximum 4 parts in a row) TECHNICAL DETAILS - Stacking height: 1200 mm - Stacking change time: 35 sec - Base throughput max.: 17 cycles/min - Maximum workpiece weight: 50 kg - Maximum workpiece length: 2,500 mm Cjdpfxeyg Haie Aa Ssgn MACHINE DETAILS - Controls: Klöckner-Möller and Siemens PLC - Total connected load: 14 kW - Compressed air consumption: 81 NL/min - Operating pressure: 6 bar

Stanje: rabljeno, prevoženi kilometri: 725.176 km, moč: 387 kW (526,17 KM), prva registracija: 06/2023, vrsta goriva: dizel, lastna masa: 9.050 kg, največja dovoljena obremenitev: 8.875 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, medosna razdalja: 5.200 mm, zavore: retarder, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, velikost sprednje pnevmatike: 385/55 R22,5, velikost zadnje pnevmatike: 315/70 R22,5, število postelj: 2, Oprema: ABS, centralno zaklepanje, klimatska naprava, parkirni grelec, računalnik na krovu, registracija tovornjaka, tempomat, | Iveco S-Way AS190S/FP 530 BDF 4x2 | Avtomatik, EURO6 | Intarder | Avstrijsko vozilo | Vlečna kljuka | Klima, multifunkcijski volan, strešno okno | Voznikov spalni prostor, ABS, vlečna kljuka | Električna okna, električni ogledali | Ogrevan sedež, dodatno ogrevanje, AdBlue | Nosilec za rezervno kolo, orodjarnica | Medosna razdalja 5200 mm | 2 rezervoarja | Linijsko vozilo, zaradi tega takšna kilometraža | Zelo dobro stanje | Pridržujemo si pravico do napak, vnosnih napak in predhodne prodaje. Cgjdpeyg Rz Rjfx Aa Sen

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveyor technology year: 2022 Serial number: 141-8300 Features: • 22kW drive motor • 7m cutting length • 5 vertical supports • 2 log turners (+2 holding devices) • Log lifting preparation with frame • 4 height adjustment claws (+2 holding devices) Cjdpfx Aaowlfdxs Ssgn • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Operator seat mounted on armrests • PLC controls on the left - joystick on the right • 1 Zenz sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water lubrication with 20l tank and nozzle o Mounted on blade guide • Log lifting device o With 3 lifting arms o With 2 cylinders • Log lifting preparation in the frame o With control unit o Holder for pipe o Two holders for cylinders • Hydraulic ejector for frame 820mm • Horizontal green laser indicator Mechanization consisting of: • Hydraulic folding frame for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors run simultaneously • 4m long roller table – slightly inclined with end stop o All electrical and hydraulic elements are operated from the operator’s station The block bandsaw including conveyor technology is fully operational.