H 1 Paletten nakup rabljenega (103.547)

Stanje: dober (rabljeno), Leto izdelave: 2004, several pieces industrial gas burner Lhjdpfxocvkale Af Sol Oilon GP-80 H + GasMultiBloc Dungs MB ZRDLE 420 B01 S20 + DUNGS FRS 520 OILON GP-80 H Capacity: 350–1000 kW Year of manufacture: 2005 Voltage: 230/400V 2kW 50Hz IP20 Control unit: LFL1.322 Gas pressure: min 20 mbar / max 360 mbar Weight: 62 kg Monoblock burner made from cast aluminium Electronic control panel: a signal diagram displays the various phases of combustion and all alarms, allowing you to constantly monitor correct burner operation Flame sensor type: QRA2 Relay software: LFL1.322 The gas supply, with suitable adapter, can be set at the side of the burner Adjustable burner flanges Air damper actuators Quick-connect terminal for mains cable connection Automatic air shut-off when the burner is switched off Position for gas safety valves Integrated gas pressure regulator Differential air pressure switch Minimum gas pressure controller Comprehensive overall control unit.

Stanje: dober (rabljeno), GUK K50/4/1/FL 2-50 Avtomatski zložljiv stroj Stroj v popolnem stanju, pripravljen na proizvodnjo. Format: 500x700 mm. Hitrost zlaganja: 30–160 m/min Oprema: 4 vzporedne kasete, elektronsko nastavljive preko računalnika 1 prečni rezalni nož Razširjena prva kaseta Neprenehna regulacija hitrosti preko inverter krmilne plošče Števec z možnostjo serijskega štetja in prikazom hitrosti zlaganja Rietschle kompresor Povišan zvočno izoliran pokrov Valj za orodja za vgradnjo pripomočkov kot so perforacija, biganje in rezanje Podajalnik FL2-50 z vakuumsko enoto Ljdpjz Dta Tsfx Af Sshl Okenska kaseta z nadzorno enoto Mobilna dostava s stalno regulacijo hitrosti.

Stanje: dober (rabljeno), Heidelberg Stahlfolder Ti 52 4/4/1 stroj za zgibanje Stroj je konfiguriran za zgibanje do 16 strani. Tehnične specifikacije: Minimalna velikost papirja: 105 x 150 mm Maksimalna velikost papirja: 520 x 840 mm Lsdpfjz Dta Hex Af Sjhl Visokozmogljivo podajanje Konfiguracija: – 4 kasete na prvem modulu Ti-52 – 4 kasete na drugem modulu 2.Ti-52 – 1 elektronski nož – Mobilna dostava Nastavitev hitrosti zgibanja z inverterjem Zmanjšanje hrupa kaset Beckerjev kompresor Senzor dvojnega lista Elektronski števec z razvrščanjem Električna dostava z nastavljivo hitrostjo dostave. Rezervni deli, orodje in dokumentacija so vključeni. Stroj je v dobrem stanju in pripravljen za uporabo.

Stanje: novo, Example configuration: 2x 12m processing table 20kW Raycus fiber laser source Boci BLT461T+AB rotary axis FSCUT 9200 control system HL-20000 water chiller Ljdpfxjwxvl Tj Af Sohl Yaskawa servo motor Optional: air compressor

Stanje: dober (rabljeno), Trapezoidal thread tap Diameter: 40 mm Pitch: 1/5 inch Lhsdpfx Aodx Uy Ief Sjl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 7.358 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6LUD00036, potovalna razdalja osi X: 620 mm, pomik osi Y: 520 mm, pomik po osi Z: 460 mm, dolžina podajanja os X: 620 mm, dolžina pomika po osi Y: 620 mm, dolžina podajanja os Z: 460 mm, hitrost pomika os X: 36.000 m/min, hitrost podajanja osi Y: 36.000 m/min, hitrost podajanja os Z: 36.000 m/min, vrtilni moment: 108 Nm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC530, dolžina obdelovanca (maks.): 500 mm, širina obdelovanca (maks.): 400 mm, višina obdelovanca (maks.): 350 mm, premer obdelovanca (maks.): 680 mm, teža obdelovanca (maks.): 300 kg, skupna višina: 3.400 mm, skupna dolžina: 4.600 mm, skupna širina: 2.700 mm, širina mize: 600 mm, višina mize: 755 mm, dolžina mize: 600 mm, obremenitev mize: 300 kg, premer vrtljive mize: 600 mm, vrtljajska hitrost (min.): 20 obr/min, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 8.500 kg, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 5.303 h, dovod hladilne tekočine: 18 letvica, razdalja od središča mize do nosu vretena: 50 mm, moč vretenovega motorja: 17.000 W, nos vretena: SK40, število vreten: 1, število mest v zalogovniku orodij: 100, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Vključitev v obrat 4/2014 Vrtenje mize po osi C: 360° Nagib mize po osi B: -50° do +110° Razdalja med osjo vretena in mizo: 150 mm Ploščina za namestitev obdelovanca: Ø650 Maksimalna obremenitev mize: 300 kg Žlebovi na mizi: 5 x 18H7 x 100 mm Osrednja luknja: Ø50 H7 x 30 mm Maksimalna velikost obdelovanca: Ø 520 x 330 mm Natančnost stroja: VDI I DGQ 3441* Natančnost pozicioniranja: +/- 0,006 mm* Ločljivost osi: 0,001 mm* *določeno pri 20 °C +/- 1 °C konstantne temperature okolice Glavni vreten: glavni pogon – AC motor, neposreden pogon Moč pogona (100% / 25% ED): 10,0/17,0 kW Lhedpfsz Diq Uox Af Sol Območje hitrosti: brezstopenjsko: 20-12000 vrt/min Stožčasta priponka vretena: SK 40 DIN 69871 Navor pri (100% / ED): 63,7/108,6 Nm Pogoni osi: Osi X, Y, Z: AC motorji Osi B, C: AC motorji Hitrosti giba: Hitri pomik po osi X, Y, Z: 36 m/min Maksimalna hitrost vrtenja po osi B: 25 vrt/min Maksimalna hitrost vrtenja po osi C: 25 vrt/min Pospešek X, Y, Z: 6,5 m/s2 Sistem za hlajenje: Zunanje hlajenje orodja s pomočjo zunanjih šob Posoda za hladilno tekočino: 280 l Delovni tlak, zunanji: 0,9 bar Sistem za hlajenje – notranje hlajenje orodja: DIN 69871, oblika A Delovni tlak, notranji dovod hladilne tekočine: 18,0 bar Ročno izpiranje delovnega prostora s pomočjo dodatne pištole Standardna oprema: - CNC upravljanje: Heidenhain iTNC 530, polna simultana 5-osna različica - Ročni krmilnik 410 (Heidenhain) - Digitalni pogoni osi - Digitalni pogon vretena - Transportni sistem za opilke s strgalom, višina izmeta 800 mm - Hladilni sistem vretena – radiatorji – plošče – hlajenje motorja vretena - Popolna zaščitna ograja s streho kabine Magazin za orodja VZG 65 5A podjetja Indunorm: Število orodij: 100 pri dolžini orodja do 320 mm / prilagodljivo na 125 orodij, nato je omogočena samo dolžina orodja 200 mm. Maksimalni premer orodja: 80 mm Maksimalni premer orodja: 130 mm (pri prostih stranskih mestih) Prestavljanje orodja z dvojnim prijemalom - Linearni merilni sistem v osi X/Y/Z (steklena merilna lestvica) - Direktni dajalnik v osi B/C - Kompenzacija temperature - IR-tipalo - 3D Programska oprema - opcija - iTNC 530 kinematike • Kalibracijska programska oprema Notranje hlajenje orodja 18 bar • Posoda za hladilno tekočino • Notranje hlajenje: 280 L DIN 69871, oblika A • Dvojni filter • Preklopljivi filtri • Stopnja filtracije: 10 μm Sistem filtracije s pasom PROIZVODNA LINIJA - RT 100 Avtomatski sistem za menjavo palet Nakladanje in razkladanje s pomočjo linearnega sistema: Podatki o manipulaciji: 100 kg (35 kg) Maksimalna teža manipulacije Kapaciteta palet: 6 palet do 400 x 400 mm: Upravljanje: PLC upravljanje z integrirano nadzorno omarico vključno s komponentami za preklapljanje in upravljanje vključno s programsko opremo za samodejni proces Sistem za vpenjanje referenčne točke: 320 x 320 x 60 mm - Vpenjanje s pomočjo 4 vpenjalnih vijakov - Razdalja med osmi: 180 mm - Vpenjalna sila: 4x12500 N - Ponovljivost: 0,005 mm - Aksialna obremenitev: maks. 4000 kg • Plošča za vpenjanje referenčne točke: 320 x 320 -Avtomatska vrata Vmesnik za avtomatizacijo in sisteme vpenjanja Univerzalni vmesnik za avtomatske sisteme za menjavo palet, sile vpenjalne naprave in sisteme vpenjanja referenčne točke • za pnevmatske sisteme vpenjanja • 2-kanalni rotacijski konektor, integriran v mizo • Pnevmatske cevi, izpeljane na zunanjo stran • Enota za vzdrževanje pnevmatike • Upravljanje preko ukazov M logični vhodi in izhodi pripravljeni vključno s 7 paletami 320x320 s 6 vpenjalnimi naprava

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Protec KT 300 H welding positioner, 170/400 special edition Lhedpfx Aferypmve Sol Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-change chuck, diameter 300 mm: surcharge €550 Quick-change chuck, diameter 400 mm: surcharge €750 Crank gear motor, continuous adjustment from 0 to 90° Variable rotation speed: 0.01 to approx. 5 rpm Including foot remote control Digital display with welding time limitation (if required)

Stanje: novo, Leto izdelave: 2025, Stebrna dvižna obračalna naprava, nosilnost 1 tona Protec obračalna naprava / pozicioner Syncrolift Dvojni steber, brezžični in ročni daljinski upravljalnik Nastavitev stebrov, premikljiva dvakrat Lodpfx Ajx Thvyef Sshl Nosilnost 1000 kg Minimalna delovna višina: 600 mm Maksimalna delovna višina: 1500 mm Hitrost: 1 obr./min Premer pritrdilne plošče: 500 mm Vrtilno gibanje: 0,37 kW Na zahtevo je možna nosilnost od 2 do 10 ton

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2007, vzmetenje: jeklo, barva: drugo, Leto izdelave: 2007, Oprema: žerjav, = Dodatne možnosti in dodatna oprema = - Hidravlični sistem = Opombe = Število osi: 3, lastna teža: 12950 kg, bruto teža: 38000 kg, vrsta šasije: popolna šasija, vrsta vzmetenja: popolno zračno, hidravlični sistem, leto izdelave nadgradnje: 2007, število strani: 1, pogon za kiper: PTO, žerjav, proizvajalec žerjava: Atlas Terex 145.2 - A 19, leto izdelave žerjava: 2007, nosilnost žerjava: 14000, število opornih stebrov: 4, preizkušeno po standardu CE, položaj upravljanja: zgornje upravljanje, položaj žerjava: za kabino, hidr. izteg: 2, H&W BIG VOLUME ALU KIPER Z ŽERJAVOM ATLAS 145.2 A19 / KRAN / KRAAN = Dodatne informacije = Splošne informacije Kabina: dnevna Registrska tablica: KLEYN1 Pogonski sistem Vrsta goriva: dizel Prenos Menjalnik: ročni menjalnik Konfiguracija osi Zavore: bobnaste zavore Vzmetenje: listnato vzmetenje Os 3: usmerljiva Teže Lastna teža: 12.950 kg Nosilnost: 25.050 kg Lhjdpez Df Uijfx Af Sel Dovoljena masa: 38.000 kg Funkcionalnost Žerjav: Atlas Terex 145.2 - A 19, leto izdelave 2007, za kabino Okolje Emisijski razred: Euro 0 Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: povprečno Poškodbe: brez = Podatki o podjetju = Kleyn Trucks je eden največjih neodvisnih trgovcev z rabljenimi vozili na svetu. Tukaj lahko izbirate med nenehno spreminjajočo se ponudbo 1200 rabljenih tovornih vozil, vlečnih vozil in priklopnih vozil. Naša ponudba vključuje vse evropske znamke različnih let izdelave in cenovnih razredov. Zakaj kupovati pri Kleyn Trucks? Preprosto! • Velika in hitro spreminjajoča se ponudba • Prepoznavna kvaliteta • Dobra cena • Korektno poslovanje • Govorimo več jezikov • Razumemo naše stranke • Zagotavljamo podporo pri uvozu in transportu • (Izvoz) registrske tablice urejene hitro • Strokovne tehnične storitve • Varnost "prepoznavne kvalitete" • In še več.... Obiščite našo spletno stran za posebne ponudbe in celoten seznam zalog: Lizing pri Kleyn Trucks je mogoč v večini evropskih držav! Hitro izračunajte mesečni obrok lizinga in pošljite povpraševanje preko naše spletne strani. Povprašajte neposredno po našem evropskem paketu garancije.

Stanje: novo, Galvanized Pallet Racks for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 11.20 meters - Load Capacity: 3,000 kg per compartment - Uprights galvanized - Beams 270 x 14 x 5 cm, type T30 - Beams galvanized - New BLT / PR45 FVZ - Manufactured in Europe & tested in accordance with current DIN EN 15512 standards. - 100% quality at the best price. Rack configuration: - 05 x Uprights approx. 450 cm x 110 cm, pre-assembled - 16 x Beams approx. 270 x 14 x 5 cm, T30 - 32 x Safety pins - 32 x Safety bolts M8 x 20 incl. nut - Levels: ground + 2 - 36 pallet spaces incl. ground level -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €2,450 net plus statutory VAT. You will receive an invoice showing the VAT separately. Transport: Delivery can be arranged through our partner forwarding agent on request, with costs depending on the postal code. Assembly: Our trained personnel are happy to professionally assemble or disassemble your warehouse equipment as needed. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning to ordering to installation. Customer note: When fitting the safety pins/bolts, holes that may be clogged due to galvanizing might need to be redrilled. Unfortunately, this cannot always be avoided with high-quality galvanizing. If you have any questions, please do not hesitate to contact us. Ljdez Dv Elepfx Af Sohl

Stanje: novo, Hot-dip Galvanized Pallet Racks for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 19.60 running meters - Load capacity: 3,000 kg per bay - Uprights: hot-dip galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams: hot-dip galvanized - New BLT / PR45 FVZ product - Manufactured in Europe & tested according to current DIN EN 15512 standard. - 100% quality at the best price. Rack includes: - 08 x Uprights, approx. 450 cm x 110 cm, pre-assembled - 28 x Beams, approx. 270 x 14 x 5 cm, T30 - 56 x Safety pins - 56 x Safety bolts M8 x 20 incl. nuts - Levels: Ground + 2 - 63 pallet spaces including ground level. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €4,100 net plus applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery is available upon request via our partnered freight forwarder. Costs depend on the destination postal code. Installation: Our trained staff are available, upon request, to professionally install and dismantle your warehouse equipment. Lsdpfx Aez Dv D Ijf Sshl Our recommendation: Let us know your requirements... We are happy to support you with your projects, from planning and ordering to installation. Customer note: During installation, holes clogged by the hot-dip galvanization may need to be re-drilled for safety pins/bolts. Unfortunately, this cannot be completely avoided with high-quality hot-dip galvanization. If you have any questions, please let us know.

Stanje: novo, PALLET RACKING, GALVANIZED FOR OUTDOOR USE Pallet racking hot-dip galvanized for outdoor installation Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 16.80 linear metres - Load capacity: 3000 kg per bay - Uprights hot-dip galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams hot-dip galvanized - New BLT / PR45 HDG - Manufactured in Europe & tested in accordance with current DIN EN 15512 standard - 100% quality at the best price Rack includes: - 7 uprights, approx. 450 cm x 110 cm, pre-assembled - 24 beams, approx. 270 x 14 x 5 cm, T30 - 48 locking pins - 48 locking bolts M8 x 20 incl. nut - Levels: ground + 2 - 54 pallet spaces including floor positions Lhedpfx Aoz Dv Dusf Ssl -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €3,550 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery is available by arrangement via our partner forwarding company; costs depend on the postal code. Assembly: Our trained staff is available to assist with professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you— from planning to ordering through installation. Customer information: When installing the locking pins/bolts, it may be necessary to re-drill holes that have been clogged due to the hot-dip galvanizing process. Unfortunately, even with high-quality hot-dip galvanizing, this cannot be completely avoided. If you have any questions, please feel free to contact us.

Stanje: novo, Galvanised Pallet Racking for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 100.16 linear metres - Load capacity: 3,000 kg per bay - Uprights hot-dip galvanised - Beams 270 x 14 x 5 cm, T30 - Beams hot-dip galvanised - Brand new BLT / PR45 HDG - Manufactured in Europe & tested to the current DIN EN 15512 standard. - 100% quality at the best price. Racking set consists of: - 37 x uprights, approx. 450 cm x 110 cm, pre-assembled. - 144 x beams, approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - 288 x safety bolts M8 x 20 incl. nuts. Lhedoz Dv A Repfx Af Sel - Levels: floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €19,900 net Plus legally applicable VAT. You will receive an invoice showing the VAT separately. Transport: Delivery is carried out upon request by our partner forwarding agent; costs depend on postcode. Assembly: Our trained personnel are at your disposal for professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in the realisation of your projects, from planning to ordering and installation. Customer note: When installing the safety pins/bolts, holes that have become blocked due to galvanisation may need to be redrilled. This unfortunately cannot be completely ruled out with high-quality hot-dip galvanising. If you have any questions, please feel free to contact us.

Stanje: novo, Hot-dip Galvanized Pallet Racking for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 14 linear meters - Load capacity: 3,000 kg per bay - Frames hot-dip galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams hot-dip galvanized - Brand new BLT / PR45 HDG - Manufactured in Europe & tested according to the latest DIN EN 15512 standard. - 100% quality at the best price. Rack consists of: - 6 x frames approx. 450 cm x 110 cm, pre-assembled - 20 x beams approx. 270 x 14 x 5 cm, T30 - 40 x locking pins - 40 x safety bolts M8 x 20 incl. nuts - Levels: floor + 2 Ledoz Dv Aqepfx Af Sehl - 45 pallet spaces including floor locations -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €2,990.00 net plus statutory VAT. You will receive an invoice with VAT shown separately. Transport: Delivery is available upon request via our partner forwarding company, costs depend on postal code. Installation: Our trained staff can professionally assemble and disassemble your warehouse systems upon request. Our Recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering to installation. Customer Notice: When installing the locking pins/safety bolts, holes that may be blocked by the hot-dip galvanizing may need to be re-drilled. Unfortunately, this cannot be entirely avoided with high-quality hot-dip galvanizing. If you have any questions, please do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2020, Cantilever Racking NEW STOCK Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK available immediately from stock. - 750 kg load capacity per arm - 2250 kg load capacity per upright - Uprights are hot-dip galvanized. - Cantilever arms are hot-dip galvanized. - Arms are bolted on. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights, approx. 300 cm incl. base, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE100 - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All stated load capacities for uprights and cantilever arms are statically verifiable at 100% load - All racking systems are supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use, and unlike painted systems, they do not rust. Consistent appearance for many years. - We use legally mandated hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and upright back are welded together, providing additional security and reducing assembly time, as feet do not need to be bolted to the upright back - Bracing made from angle steel – no tension rods necessary, which shortens assembly times - No slotted hole system – this means no weakening of the upright profile Price: €2,404.00 net + legally applicable VAT You will receive an invoice with VAT shown separately. Lhedpfxez Dvuts Af Sjl Accessories such as floor anchors, impact protection, etc., can also be purchased from us. Transport: Delivery can be arranged via our partner freight forwarder; costs depend on postal code. Assembly: Our trained personnel are available to assist with professional assembly and dismantling of your facility, if required. Our recommendation: Let us know your requirements... We are happy to help realize your projects from planning to ordering to installation.

Stanje: novo, Leto izdelave: 2020, Cantilever Racking NEW STOCK Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, immediately available from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms height-adjustable in 100 mm increments - Levels: Base + 3 storage levels (4 storage levels in total) Racking consists of: - 04 x uprights incl. base, approx. 416 cm made from IPE160 - 12 x cantilever arms, approx. 120 cm made from IPE 80 Ljdpez Dvtvjfx Af Sohl - Including all necessary connecting elements and bolts Why BLT Cantilever Racking? - Certified German manufacturer – DIN EN 1090 – Made in Germany - All stated load capacities for frames and arms are statically verified at 100% load. - All racking systems are delivered hot-dip galvanized. Suitable for indoor and outdoor use, and won’t rust like painted racks. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long-term availability guarantee for spare parts - Base and spine of upright are welded together, ensuring maximum safety and reduced assembly time, as there’s no need to bolt the base to the upright separately - Bracing made from angle steel means there’s no adjustment required via turnbuckles, further shortening assembly times - No slotted hole system, ensuring no weakening of the upright profile Price: EUR 2,578.00 net + VAT as required by law. You will receive an invoice with VAT shown separately. Accessories such as floor anchors, impact protection, etc., are also available from us. Transport: Delivery can be arranged by our partner forwarding company on request, with shipping costs depending on postal code. Installation: Our trained staff are available to assist you with professional assembly and disassembly of your warehouse equipment as needed. Our recommendation: Let us know your requirements… We are pleased to help you realize your projects, from planning and ordering to installation.

Stanje: novo, Leto izdelave: 2022, Cantilever Racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW, immediately available from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels total) Racking consists of: - 4 x uprights, incl. base, approx. 300 cm, made of IPE160 - 12 x cantilever arms, approx. 120 cm, made of IPE80 - Incl. all necessary connecting elements and bolts. Why choose BLT cantilever racking? - Certified German manufacturer DIN EN 1090 – Made in Germany - All stated load capacities for uprights and cantilever arms are statically verified at 100% capacity. - All racking is supplied in hot-dip galvanized finish. Suitable for both indoor and outdoor use, does not rust like painted racks. Maintains consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term aftermarket guarantee - Upright foot and upright back are welded together, providing extra safety and reducing assembly time as the feet do not need to be bolted separately to the upright backs. - Bracing made from angle steel eliminates the need for adjustable turnbuckles, thus shortening assembly time. - No slotted hole system, meaning no weakening of the upright profile. Price: Lhsdsz Dvknjpfx Af Sol €2,265.00 net + applicable statutory VAT You will receive an invoice with VAT shown separately. Transport: Delivery by our partner freight forwarder on request, costs depend on postal code. Assembly: Our trained staff are happy to assist with the professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly.

Stanje: novo, Leto izdelave: 2022, Cantilever Rack – NEW STOCK Specifications: - Height (H): approx. 400 cm - Depth (T): approx. 137 cm - Length (L): approx. 402 cm - Cantilever Arms: approx. 120 cm - Axle dimension: 131 cm - BRAND NEW, immediately available from stock. - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Rack includes: - 4x uprights, incl. base, approx. 400 cm, made from IPE160 - 12x cantilever arms, approx. 120 cm, made from IPE80 - incl. all necessary connecting elements and bolts Why choose BLT Cantilever Racks? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All stated load capacities for uprights and arms are structurally verified at 100% load - All racking systems supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use and will not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt assemblies in accordance with DIN EN 15048-1 - Long-term spare parts availability - Upright base and rear are welded for added safety and reduced installation times, as the bases do not need bolting to the upright backs - Bracings made from angle steel, no adjustment via turnbuckles required; this reduces installation time Lhodpfx Afsz Dvdbe Ssl - No elongated hole system, so the upright profile is not weakened Price: €2,462.00 net + VAT as legally required. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged via our partner freight forwarder; costs depend on your postal code. Installation: Our trained personnel are available to assist you with professional installation and dismantling of your facility if required. Our recommendation: Let us know your requirements… We are happy to assist you with your projects, from planning and ordering to installation.

Stanje: novo, Leto izdelave: 2020, Cantilever rack NEW STOCK Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, immediately available from stock. - 750 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized Lodpfx Afez Dvbtj Sohl - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights incl. base approx. 416 cm made from IPE160 - 12 x cantilever arms approx. 120 cm made from IPE100 - incl. all necessary connecting elements and bolts Why choose BLT cantilever racks? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically verified at 100% load - All racking systems are supplied in hot-dip galvanized finish. This makes them suitable for both indoor and outdoor use and unlike painted systems, they will not rust. Consistent appearance for many years - We use legally approved hot-dip galvanized bolt sets according to DIN EN 15048-1 - Extended repurchase guarantee - Upright base and rear are welded together for additional safety and reduced assembly times, as the foot does not need to be bolted separately to the upright - Bracing made from angle steel eliminates the need for adjustment with turnbuckles, shortening assembly time - No slotted hole system, so there is no weakening of the upright profile Price: €2,631.00 net + statutory VAT You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. are also available from us. Our recommendation: Let us know your requirements... We are happy to assist you with the implementation of your projects, from planning and ordering to assembly. Delivery possible at a favorable rate upon request.

Stanje: novo, Leto izdelave: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, available immediately from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms are bolt-on. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights, incl. base approx. 350 cm, made of IPE160. - 12 x cantilever arms approx. 120 cm, made of IPE80. - Incl. all necessary connecting elements and bolts. Why choose BLT Cantilever Racking? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for both uprights and arms are statically verifiable at 100% load. - All racking systems supplied in hot-dip galvanized finish. Can be installed indoors or outdoors, and do not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized fastener assemblies according to DIN EN 15048-1 - Long-term availability of spare parts - Upright foot and upright back are welded together, offering enhanced safety and quick installation, as feet do not need to be bolted separately. - Bracing made of angle steel, eliminating the need for tension rod adjustments. This significantly reduces assembly time. - No slotted hole system, so the upright profile remains uncompromised. Price: €2,356.00 net + statutory VAT. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged by our partner freight forwarder upon request. Freight cost depends on postal code. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your storage systems if required. Ljdpfsz Dva Nex Af Sohl Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning and ordering to assembly.

Stanje: novo, Number of drawers: 6 pcs Load capacity: 100 kg Dimensions (L x W x H): 705 x 736 x 1019 mm Net weight: 126 kg Equipment/features: - Tool cabinet with 6 ball-bearing drawers (75 - 125 - 150 - 150 - 200 - 200 mm) Lsdow U U Rfspfx Af Sohl - Drawer extension: 88% - Usable internal dimensions: 600 x 600 mm - Lockable

Stanje: dober (rabljeno), Euro palete, nadstavni okvirji, približno 1500 kosov na zalogi. Prodaja od 100 kosov naprej / cena na kos 7,50 € neto. Lhedpfx Afozlfcfs Sel Prodaja pri 500 kosih / cena 6,50 € neto. Prodaja vseh 1500 kosov / 5,50 € neto. Brezplačna dostava s tovornjakom iz skladišča v Iserlohnu.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Prodajamo delujoče in dobro ohranjene plinske gorilnike znamke Weishaupt G50 – 5400 kW, vključno s plinskim ventilom MULTIFLAM, leto izdelave 200/. Lsdpfxozabnne Af Sshl G50/1-B MULTIFLAM Moč: 450 – 3500 kW Izvedba: 3LN Leto izdelave: 2007

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,8 kW (25,56 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rdeča, skupna masa: 2.470 kg, dvižna moč: 1.200 kg/m, dvižna višina: 2.489 mm, velikost pnevmatike: 31x15,5x15 AS, stanje pnevmatik: 100 odstotek, konfiguracija osi: 2 osi, emisijski razred: Euro 5, širina izkopne žlice: 1.600 mm, Leto izdelave: 2025, gorivo: dizel, nosilnost: 1.200 kg, Oprema: dodatne luči, kabina, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, zaščita za glavo, The H&R 2512 yard loader offers you more fun at work for little money. With its small turning radius, the H&R 2512 wheel loader is also suitable for compact areas. Thanks to the comfort cab, it remains comfortable and suitable for inclement weather. Its 4-cylinder engine with 25 HP is particularly fuel efficient and powerful. With the 2-stage torque converter transmission and all-wheel drive, the loader operates smoothly even on challenging terrains. The wide tires, included as standard, provide outstanding stability and guarantee excellent traction. The hydraulic quick coupler allows for fast changing of the supplied attachments (standard bucket and pallet fork included). An additional 3rd and 4th control circuit with float position is available. H&R loaders are technically and visually optimized in-house and undergo thorough inspection. Each machine also receives comprehensive corrosion protection treatment. Our loaders comply with the EU Machinery Directive (CE certified). We provide a TÜV Süd expert report for obtaining an individual operating permit pursuant to §21 StVZO (road approval / operating permit as self-propelled work machine). Key Features H&R 2512 Compact Loader • Full equipment • Extensively optimized in Germany • Incl. pallet fork • Incl. standard bucket, 160 cm wide • Hydraulic quick coupler • Additional hydraulics for front attachments (3rd + 4th control circuit) • Auxiliary cooler for hydraulic oil • Joystick with electronic gear shifting and float position • Spacious cab with excellent all-round visibility • Heating and ventilation • 220V electric preheater for engine • Rotating beacon • Additional LED lighting • Radio with MP3 and USB • Adjustable comfort seat with armrest • Adjustable steering column • Operating hours counter and fuel gauge • Tow hitch for trailer use • Reversing camera with display • Wide tires 31X15.5-15 agricultural • 1-year spare parts warranty • CE compliant according to EU Machinery Directive Lhodpfxsrgn U Eo Af Sol Price Net: €19,975.00 VAT: €3,795.25 Gross: €23,770.25 Financing available. Optional Full warranty up to 48 months available Road registration/operating permit €595 Transport within Germany/Austria available for an additional fee. -> Please provide your postal code for a non-binding, individual transport cost offer. Technical Specifications Lifting capacity: 1200 kg Lifting height: 2489 mm (bottom edge standard pallet fork) Dump height: 2023 mm (standard bucket fully tipped) Engine: Yunnei 4-cylinder Engine power: 18.8 kW / 25 HP Emission class: Euro 5 Drive: Torque converter Speed approx. 20 km/h Dimensions (L x W x H): 3740 x 1600 x 2460 mm Weight: 2470 kg Tires: 31x15.5-15 AS Accessories and spare parts are available from us. When making inquiries, please provide your telephone number.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,39 kW (25,00 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rdeča, skupna masa: 2.140 kg, dvižna višina: 2.530 mm, velikost pnevmatike: 31 x 15,5 -15, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, emisijski razred: Euro 5, širina izkopne žlice: 1.500 mm, Leto izdelave: 2025, Oprema: dodatne luči, hidravlika, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, The H&R Wheel Loader 2010-B35 (Wide Track) – compact loader with wide track for enhanced stability. The new 3-cylinder Perkins turbo engine, 18.5 kW (Mannheim, Germany), meets the Euro 5 standard even without a particulate filter and offers outstanding efficiency. Thanks to the 2-speed hydrostatic drive, the 2210 B35 compact loader achieves approx. 16 km/h and is smooth to operate. The large steering angle of 42° and the tight turning circle make it ideal for work in confined spaces. The yard loader comes standard with a pallet fork and general-purpose bucket, enabling you to start work immediately. Thanks to the 3rd and 4th hydraulic control circuit, various attachments can be operated. The hydraulic quick coupler allows fast and convenient tool changes on the front loader. With a high lifting capacity of 950 kg, the H&R 2010 loader can lift heavy loads to a height of 2.53 m. Its wide profile 31 x 15.5-15 tires provide outstanding stability. The E-range function on the joystick ensures particularly comfortable operation of the H&R 2010-B35. All H&R loaders are technically and visually optimized in-house and undergo intensive quality checks. Additionally, each machine receives extensive corrosion protection. Our loaders are CE compliant in line with EU Machinery Directive. For our machines, there is a TÜV Süd report available to obtain an individual operating permit in accordance with §21 StVZO (road approval / operating license as a self-propelled work machine). Key Features H&R 2010-B35 Hoflader: • Wide track for increased stability • Technically and visually optimized in-house • Incl. manually adjustable pallet fork • Incl. standard general-purpose bucket 150 cm • Comfort cab with heating, ventilation, and radio • Joystick with float position and E-range function • Auxiliary hydraulics for front attachments, 3rd and 4th control circuit • Trailer hitch for use with trailers • Hydraulic oil cooler • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5 - 15 • Adjustable steering column • Hour meter and fuel gauge • CE compliant per EU machinery directive • 1 year spare parts warranty Price: Net: €21,672.00 Lhjdjv Dachspfx Af Sel VAT: €4,117.68 Gross: €25,789.68 Financing available! Optional: Road approval / operating permit: €595 Extended warranty (2 years): €590 Transport within Germany & Austria: on request Technical Specifications: Engine: 3-cylinder Perkins Turbo (25 hp) Emission class: Euro 5 Lifting capacity: 950 kg Lift height: 2,530 mm (bottom edge of standard pallet fork) Dumping height: 1,956 mm Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2,140 kg Speed: approx. 16 km/h Bucket width: 150 cm Standard tires: 31 x 15.5 - 15 Accessories and spare parts are in stock. Please provide your telephone number with your enquiry!