Fretting Žaga nakup rabljenega (3.716)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Iszkaszentgyörgy
279 km
Polavtomatska tračna žaga
BOMARWorkline 510.350 DGH
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Način delovanja: polavtomatski
Tip stroja: horizontalna tračna žaga
Rez: poševni rez (gehrungschnitt)
Območje poševnega reza: -60° do +60°
Pogonska moč: 3 kW, 3 x 400 V/50 Hz
Hitrost tračnega lista: 20–120 m/min
Dimenzije tračnega lista: 4780 x 34 x 1,1 mm
Višina nakladanja materiala: 761 mm
Najkrajša preostala dolžina: 60 mm
Žagalne zmogljivosti:
- 0 stopinj = krog Ø350 mm, pravokotnik 510 x 350 mm, kvadrat 350 mm
- 45 stopinj D = krog Ø350 mm, pravokotnik 400 x 100 mm, kvadrat 340 mm
- 45 stopinj L = krog Ø350 mm, pravokotnik 415 x 100 mm, kvadrat 350 mm
- 60 stopinj D = krog Ø250 mm, pravokotnik 260 x 100 mm, kvadrat 240 mm
- 60 stopinj L = krog Ø270 mm, pravokotnik 280 x 100 mm, kvadrat 260 mm
Dimenzije D x Š x V = 2570 x 1070 x 1500 mm
Teža: 710 kg
Giedpfx Afoyxczns Sjr
Mali oglas
Iszkaszentgyörgy
279 km
Tračna žaga
BOMARIndividual 820.640 DGH
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Prva uporaba: 2024
Način delovanja: polavtomatski
Tip stroja: horizontalna tračna žaga
Gedpfx Asyxcu Usf Sjir
Rez: poševni rez
Območje poševnega reza: -60° do 60° (L/D)
Pogonska moč: 5,5 kW, 3 × 400 V/50 Hz
Hitrost tračnega lista: 20–120 m/min
Dimenzije tračnega lista: 7900 × 54 × 1,6 mm
Višina nalaganja materiala: 810 mm
Najkrajša ostanek dolžine: 40 mm
Najmanjši premer reza: Ø 10 mm
Kapacitete žaganja:
- 0 stopinj = okroglo D640 mm, pravokotnik 820 x 640 mm, kvadrat 640 mm
- 45 stopinj D = okroglo D560 mm, pravokotnik 560 x 400 mm, kvadrat 540 mm
- 45 stopinj L = okroglo D580 mm, pravokotnik 580 x 560 mm, kvadrat 560 mm
- 60 stopinj D = okroglo D380 mm, pravokotnik 380 x 250 mm, kvadrat 360 mm
- 60 stopinj L = okroglo D400 mm, pravokotnik 400 x 530 mm, kvadrat 400 mm
Dimenzije (D׊×V): 3750 x 2400 x 2700 mm
Teža: 2500 kg
Mali oglas
Dreieich
637 km
Hladna žaga
KALTENBACHKKS 400
Pokliči
Stanje: zelo dobro (rabljeno), Premer žaginega lista: 400 mm
Premer reza: 130 mm
Hod: 150 mm
Rezanje pod kotom - obojestransko +90°/-90°
Hitrost rezanja: 10/20 m/min
Obratovalna napetost: 400 V
Gijdpfoy Aytvox Af Ssr
Hitrost podajanja brezstopenjsko nastavljiva: 0 - 1000 mm/min
Skupna potrebna moč: 3,4 kW
Teža stroja cca: 840 kg
Potrebni prostor cca: 1,10 x 0,9 x 1,50 m
- Tovarniška št.: 24817

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Lugendorf
258 km
Popolna žaga (stacionarna)
LinckVM50,EV50,VMP450….
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Ponudba – LINCK žagalna linija VM50 (letnik 2010)
Razpoložljivi stroji
Span žagalna linija Linck VM50 – vsi letnik 2010, v zelo dobrem stanju!
Stroji so bili redno vzdrževani.
Del linije je trenutno še v obratovanju in si ga je možno po dogovoru ogledati.
Linck VM50 žagalna linija – sestavljena iz (na zalogi):
• Uvlečna naprava ZV21, model EV 50
• Profilni spaner ZD31, model VM50, 2 × 200 kW
• Izvlečna naprava AV31, model VZM
• Centrirna naprava VZ21, model VZV
• Naprava za obračanje lesa DV21, model DV70-2
• Microtec merilni sistem
Dodatne komponente (na voljo od septembra 2026):
• Uvlečna in centrirna naprava EVP
• Profilni spaner VM50, 2 × 200 kW
Gsdpoyza D Sofx Af Ssir
• Profilirna enota VMP450 F61, 4 × 110 kW
Mali oglas
Sasbachwalden
586 km
Tračna žaga
KASTOKASTOssb VA 260
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.000 mm, skupna dolžina: 2.000 mm, skupna širina: 2.000 mm, dolžina tračnega lista: 4.115 mm, širina tračne žage: 41 mm, Fully hydraulic heavy-duty band saw in the most robust construction, with a horizontally and parallel moving saw band, for cutting profiles, pipes, and solid materials of all grades, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide saw bands.
Godoxc D Egopfx Af Ssir
The saw unit is constructed from solid polymer concrete, providing maximum running smoothness and extended blade life.
The saw unit is guided using a vertical and a round column guide (double-column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides.
Material clamping is achieved via two hydraulic vices. The machine is easy to operate. Cutting length is input using a handwheel with 0.1 mm resolution. Piece count is set via a counter; the machine stops automatically once the desired quantity is reached. Material feed is controlled by a feed cylinder, ensuring the highest cutting accuracy. The machines are user-friendly and operate fully automatically.
SSB 260 VA
260 mm x 260 mm (Ø 260 mm)
Technical Data: Band Saws KASTO
Automatic Bandsaw
Machine Type: SSB 260 VA
Technical Data: 2-column guided
Year of Manufacture: 1991
Cutting Range: 260x260 mm
Saw Drive Power: 4 kW
Auxiliary Drive Power: 6.5 kW
Cutting Speed: 15–125 m/min
Hydraulic Saw Feed: Infinitely adjustable
Saw Band Dimensions: 4115x41x1.1 mm
Feed Length: 600 mm
Max. in Multiple Feed: 5400 mm
Material Table Height: 850 mm
Machine Dimensions:
Length/Width: 1690x1900 mm
Height: 2030 mm
Machine Weight: 2100 kg
Equipment:
Chip conveyor
Coolant system
Multiple feed
Side guide rollers
Machine roller conveyor
Adjustable side guide rollers
Prepared for bundle clamping device
Multiple feed counter
Odkrijte več rabljenih strojev
Mali oglas
Juszczyn
530 km
Kotna žaga
AlfamacchineT350
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Double mitre saw ALFAMACCHINE T350
Godjyzrgxopfx Af Seir
Double saw for cutting at 45-degree angles
Blade diameter: 350 mm
Blade bore: 30 mm
Blade speed: 3000 rpm
Motors: 2 × 1.5 kW
Air requirement: 5–7 bar
Cutting width: 15–80 mm
Cutting height: 10–80 mm
Mali oglas
Juszczyn
530 km
Kapna žaga
OmgaRadial RN 450
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Radialna žaga OMGA Radial RN 450
Giedpfxsyzp Dno Af Ssr
Maksimalna širina reza pri 90°: 450 mm
Maksimalna višina reza: 80 mm
Rezkalni agregat nastavljiv v dveh ravninah
Hitrost vrtenja žage: 3000 obr/min
Glavni motor: 2,21 kW
Velikost žaginega lista: 300 mm
Napajanje: 220 V
Mali oglas
Marktgraitz
530 km
Avtomatska tračna žaga za kovino
COSENC-320 NC
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2015, številka stroja/vozila: C10428528, Funkcionalnost: popolnoma funkcionalen, moč: 5 kW (6,80 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, skupna višina: 1.800 mm, skupna dolžina: 7.000 mm, skupna širina: 2.200 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, COSEN C-320 NC Avtomatska tračna žaga za kov
- Dimenzije žaginega traku: 4240 x 34 mm
- Hitrost rezanja: 15 - 100 m/min
Dimenzije rezanja:
- okroglo: 320 mm
Gjdpfx Afjym Sa Uj Sjir
- kvadratno: 320 x 320 mm
- pravokotno: 380 x 320 mm
- vključno z valjčno progo
- Dolžina valjčne proge: 3500 mm
- Širina valjčne proge: pribl. 450 mm
Pozor: Stroj mora biti obvezno prevzet v dogovorjenem terminu med 21.04. in 30.04.2026.
FCA D-96257 Marktgraitz – naloženo na tovornjak
Mali oglas
Slovenija
0 km
Pločevinasta žaga
HOLZMAHCL 11/56/22
Pokliči
Leto izdelave: 2001, obratovalne ure: 22.539 h, stanje: pripravljen za uporabo (rabljen), Stroj HOLZMA HCL 11/56/22 je bil izdelan leta 2001. Omogoča največjo velikost panela 5600 × 2200 mm in dolžino reza 5600 mm za vzdolžno žaganje. Pila ima izmet rezila do 125 mm, vključuje pa obračalno postajo dimenzij 1250 × 1250 mm. Dvigalna zmogljivost znaša 10 ton, največja višina dviga pa je 1430 mm. Razmislite o priložnosti za nakup te formatne žage HOLZMA HCL 11/56/22. Za več informacij nas kontaktirajte.
Giodpfx Aox D Exdjf Sor
Področja uporabe
Žaganje (Les)
Mali oglas
Jonschwil
474 km
Tračna žaga
BEHRINGERHBM 440A ALU
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), vhodna napetost: 400 V, največja širina rezanja: 440 mm, vrsta upravljanja: Krmiljeno s PLC krmilnikom, skupna višina: 1.600 mm, skupna dolžina: 3.300 mm, skupna širina: 1.500 mm, skupna masa: 4.700 kg, Obseg rezanja okroglega jekla pri 90°: 440 mm, Oprema: CE označba, dokumentacija / priročnik, Avtomatski tračni žagalni stroj za aluminij, zmogljivost rezanja Ø 440 mm, rez pod 90°, brezstopenjska hitrost traku 200-1100 m/min, motor 22 kW z brezstopenjsko regulacijo, hladilna naprava s filtrom, transporter za ostružke, števec kosov, hidravlično vpenjanje materiala in nastavljiv pomik, dimenzije 3300x1500x1600 mm, teža pribl. 4700 kg.
Gjdpjy Awagsfx Af Seir
Mali oglas
Tauberbischofsheim
555 km
Večlistna prečna žaga
Daveba
Pokliči
Stanje: rabljeno, Število agregatov: 6 kosov
Širina reza: pribl. 5.000 mm
Višina reza: pribl. 100 mm
Večlistna čelilna žaga Daveba za istočasno rezanje dolgih desk na več krajših (z variabilno dolžino) brez mehanizacije.
Godpeyztz Rofx Af Sjir
Stroj je demontiran in pripravljen za nakladanje.
Mali oglas
Nemčija
394 km
Stoječa ploščata žaga Holz-Her 1220
Holz-Her1220
Pokliči
Stanje: rabljeno, Rabljeni stroj
Leto izdelave: 1991
Povsem avtomatski stoječi,
Območje reza 5.300 x 2.200 mm (širina reza x višina reza),
Premer žaginega lista: 300 mm,
Gedpfx Afjx Rr D Aj Ssir
Krmiljenje za vertikalne in horizontalne reze,
z ALU preklopnimi prisloni in ALU vmesno podporo,
z napravo za predrezovanje SUPER-CUT
Motor 3 kW - 400 V
Razpoložljivost: kratkoročno
Lokacija: Röllbach
Mali oglas
Češka republika
442 km
Dvojna kotna žaga
elumatecDG 142 + E 255
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20303, dolžina rezanja (maks.): 4.500 mm, premer žaginega lista: 500 mm, pritisk: 7 letvica, Pnevmatski naklonski razpon od 90° do 45°
Premer žaginega lista 500 mm
Hitrost žaginega lista 2.800 vrt/min
Napajanje 230/400 V, 3~, 50 Hz
Izhodna moč 4 kW
Pritisk stisnjenega zraka 7 bar
Poraba zraka na delovni cikel 20 l brez pršenja, 32 l s pršenjem
Idealni stroj za visokoserijsko proizvodnjo pri rezanju pri 90° in 45°
Navpična pnevmatska enota za vpenjanje materiala
Stroj je pripravljen za obratovanje
Nudimo strokovno montažo
Godpfsy Ah Hkjx Af Sjir
Mali oglas
Bystrzyca Kłodzka
476 km
Rezalna žaga
StromabTR500 MATRIX 7000
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 1.234 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 7.000 mm, dolžina pomika po osi Y: 600 mm, dolžina podajanja os Z: 250 mm, hitrost pomika os X: 80 m/min, skupna dolžina: 8.000 mm, skupna višina: 1.800 mm, skupna masa: 2.000 kg, premer žaginega lista: 500 mm, premer diska: 500 mm, dolžina mize: 7.000 mm, Oprema: USB priključek, Na prodajo ponujam optimirko STROMAB MATRIX TR 500 v zelo dobrem tehničnem stanju, uporabljeno v manjši proizvodni delavnici, predvsem za razrez konstrukcijskega lesa.
Uporabljena za izdelavo montažnih hiš.
Stroj je popolnoma delujoč in redno servisiran.
Pripravljen za uporabo brez dodatnih investicij.
Prodaja na račun z DDV.
Gjdpfx Afowp Rvhs Sjir
MOŽNOST PREIZKUSA NA LOKACIJI
CENA po dogovoru.
Mali oglas
Nemčija
661 km
Stoječa krožna žaga za les Her Sector 1260 avtomatska
HOLZ-HERSector 1260 automatic
Pokliči
Stanje: rabljeno, Leto izdelave: 2021, Used machine
Year of manufacture: 2021
Cutting length: 5300 mm
Cutting height: 2200 mm
Vertical panel saw for cutting panel-shaped wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc.
Base machine:
- Fully welded frame with extremely high rigidity
- Precise guidance of the saw beam/saw unit for accurate cuts. Automatic feed for vertical and horizontal cuts. Maximum cutting depth: 60 mm
Saw beam:
- Robust saw beam guided on precision rails. Pneumatic locking of the saw beam at both bottom and top positions. Electrically monitored during vertical cuts.
Saw unit:
- Smooth and ergonomic operation for plunging in and out of the saw unit. The plunge lever can be folded in the upper position for precise immersion of the saw unit. Generously sized levers for easy swiveling. Housing cover opens for full access to the saw unit, allowing easy tool changes with ProLock quick-release chuck. Viewing slot: riving knife can be retracted.
Automation functions:
- Automatic plunge, cut, retract, and stop
or
- Automatic plunge, cut, retract, and return
- Shortened return path (selector switch)
Gedjyuld Aopfx Af Ssir
- The shortened return capability of the saw beam eliminates unnecessary movement of the saw unit (when short workpieces are positioned on the right)
Speed control: stepless from 6 – 24 m/min
Cutting depth: max. 60 mm
Control panel:
- Efficient operation of the machine. Ergonomically positioned at eye level.
Lower workpiece support:
- Sturdy, wear-free stainless steel support. Support extends to the cutting line: Narrow workpieces cannot tip over or fall through.
Extraction:
- Effective dust extraction with two ports: Saw unit Ø 120 mm, machine frame end Ø 100 mm (for TRK variant)
Lift-roller transport system:
- Manually raisable and lowerable rollers for easy and material-friendly panel transport.
Measuring tape:
- For displaying measurements of horizontal cuts with three manual indicators:
- Absolute measurement from the lower workpiece support
- Absolute measurement from the middle workpiece support
- Series cuts from the top edge of the panel
Power package:
- The package includes the following options:
1. TRK extraction device
2. SuperCut scoring unit
3. Digital vertical display
4. Stepless speed control
*
Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz
Includes carbide-tipped circular saw blade Ø 250 x 30 x 3.2 mm, 48 teeth, hollow flat tooth
*
TRK system according to CE Guidelines SH 2200 (less than 2 mg of fine dust/m³ air) – required for all CE countries (extraction system provided by customer)
Pneumatic shifting grid:
- Continuous shifting grid along the entire length of the machine for stable workpiece positioning. Automatically, pneumatically retracted during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts.
*
Digital measurement display for horizontal cuts at the control panel, including electronic fine adjustment. Displays:
- Absolute measurement from lower workpiece support
- Offset measurement from middle workpiece support
- Series cuts from the top edge of the panel
- Saw blade compensation (blade kerf width individually programmable)
If the unit is braked at the beam...
Mali oglas
Nemčija
650 km
Krožna žaga
EiseleHCS 160 MF
Pokliči
Stanje: rabljeno, Leto izdelave: 2014, številka stroja/vozila: 0101-250007, The refurbished Behringer Eisele HCS 160 MF metal circular saw is a fully automatic straight-cutting machine. The HCS160MF is a premium, robust machine specifically designed for professional applications and maximum cutting performance in metalworking. Additionally, the saw is engineered for multi-shift operation. It offers an excellent combination of power, precision, and versatility, making it particularly suitable for large-scale series production. The HCS160MF sawing automation system includes a comprehensive material loading and unloading system. On the infeed side, the loading magazine is positioned; on the outfeed side, short lengths can be pushed into designated containers off the conveyor at three positions using the discharge device. The system is in excellent condition.
This HCS 160 MF straight-cutting automatic circular saw consists of:
Behringer Eisele HCS 160 MF straight-cutting circular saw
Feed gripper for material handling within the saw
Behringer Eisele loading magazine
Gisdjy Akriopfx Af Ssr
Behringer Eisele discharge unit
Siemens PLC control system
Chip conveyor
Mali oglas
Malsch
586 km
Krožna žaga - avtomatska
KASTOVariospeed C 14
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Saw blade diameter: 360 / 400 / 425 mm
Cutting diameter: 10 - 140 mm
Cutting speed: 8 - 150 m/min
Coolant consumption: max. 40 l/min
Material support height: 950 mm
Clear passage between columns: 680 mm
Control system: Siemens Simatic
Total power requirement: 28 kW
Machine weight: approx. 4.2 t
Space requirement: approx. 2.8 x 1.8 x 2.2 m
Gsdpfxevzt Eqj Af Seir
Suitable for: construction steels, stainless steels, tool steels
Mali oglas
Malsch
586 km
Tračna žaga - avtomatska
BEHRINGERHBP 263
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Premer reza 400 x 260 mm
Dolžina tračnega lista 4640 mm
Širina reza 400 mm
Celotna potrebna moč 8 kW
Teža stroja cca 2,2 t
Godpfx Aoymqwlof Seir
Prostorske zahteve cca 2,6 x 1,8 x 1,8 m
Mali oglas
Nattheim
457 km
Vodoravna žaga za plošče
PanhansS 45
Pokliči
Stanje: rabljeno, Leto izdelave: 2009, Dolžina reza: 4200 mm Širina reza: 3200 mm Največji izstop žaginega lista: pri žagin listu navpično 0° = 70 mm, pri žagin listu nagnjenem na 45° = 50 mm Hitrost podajanja naprej: 0-80 m/min. Hitrost podajanja nazaj: 100 m/min. Teža: pribl. 5400 kg. Moč motorja: 14 kW Predrezilo: 1,5 kW Orodje: premer: 350 mm, izvrtina: 30 mm Priklop za odsesavanje spodaj: 140 mm Priklop za odsesavanje pri pritiskalni letvi: 100 mm
Lokacija skladišča: Dobavitelj
Gijdpoyf Nu Tefx Af Ser
Mali oglas
Avstrija
237 km
Tračna žaga
HESSE by BEKA-MAKBMSY 320 DGH
Pokliči
Stanje: novo, Leto izdelave: 2025, Condition: New
Year of manufacture: 2025
Stock number: 060077
Delivery time: immediate, subject to prior sale
Country of origin: Turkey
Price: €14,200
Leasing rate: €272.64
Bestseller: 1
In stock: 1
Saw frame: pivoting frame
Saw blade dimensions: 4160 x 34 x 1.1 mm
Infinitely variable band speed: 15 - 120 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 450 x 320 mm
Cutting capacity 30° round: 320 mm, square 320 mm
Cutting capacity 45° round: 320 mm, square 320 mm
Cutting capacity -30° round: 320 mm, square 320 mm
Cutting capacity -45° round: 320 mm, square 300 mm
Cutting capacity -60° round: 230 mm, square 220 mm
Working height: 860 mm
Hydraulic motor: 0.37 kW
Main motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 2230 mm
Width: 1150 mm
Gijdjwiq Rlspfx Af Sor
Height: 2140 mm
Weight: 1030 kg
Double mitre bandsaw
Frequency inverter for infinitely variable band speed
Hydraulic vice
Heavy-duty gearbox
Hydromechanical saw blade tensioning
Saw blade cleaning brush
Digital display for mitre angle
Coolant system
Operating manual in German and English
OPTIONS:
Roller conveyors and saw blades available on request.
Mali oglas
Kanal
107 km
Tračna žaga
MEPShark 332 nc evo
Pokliči
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Rabljena avtomatska hidravlična tračna žaga za kovino MEP SHARK 332 NC EVO
Gsdoul Svlopfx Af Ssir
Dimenzije lista: 3320x27x0,9mm
Kot reza: od 45° do +60°
Načini delovanja: ročni, polavtomatski-dinamični, polavtomatski, avtomatski
Rezalna hitrost: 15-100m/min (inverter)
Kapaciteta reza: pri 0° - okroglo 300mm - kvadrat 260mm - pravokotnik 330x260mm
Dimenzije: 2600x2320x2000mm
Leto izdelave: 2011
Teža: 1050kg
Stroj je v celoti obnovljen in testiran.
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Oberkochen
470 km
žaga za zasteklitvene letve
HECHTExenso DS350E - Video -
Pokliči
Stanje: novo, Leto izdelave: 2026, Number of motors: 2 units
Working length: 3000 mm
Control: yes / CNC
Loading dimensions (L x W x H): 4000 x 1500 x 1500 mm
Weight: 800 kg
HECHT Double Mitre Saw Exenso DS350E - 3000 mm
For wooden glazing bars, muntin bars, profile strips, aluminium strips, etc.
Item 1.1 Article number 942.5103
1 pc. HECHT Exenso DS350E
- Working length: 3000 mm
- Swivel range: 22.5° (internal) to 135° (external)
- Right head movable
- Saw blade mount: Ø 350 mm
- Including 1 pc. center support.
- Pneumatic clamping of aggregates.
- Position control Exenso DS3 with touch panel 15” display in
dust-protected monitor housing.
- 3-axis control: 1 longitudinal axis and 2 swivel axes.
- Manual entry of cutting data
- Processing of data from a cutting list (data set as specified)
- Processing of measuring tape data (wireless caliper GMF)
- Ethernet port 10/100 (TCP/IP)
- USB interface
- Including control cabinet, motor, and software licenses.
Item 1.2 Article number 942.5203
DS feed unit, hydropneumatic
Item 1.3 Article number 723.0121
2 pcs. DS saw blade wood
Bevel / bevel / flat tooth – positive
Item 1.4 Article number 942.5236
2 sets of DS workpiece clamping, combined
Combined workpiece clamping consisting of:
Pneumatic swivel clamp for clamping the material from above.
(Free access to the work table)
Horizontal pneumatic clamp – anti-twist clamping cylinder with pressure pad.
Clamps can be individually selected via saw’s control system.
Clamping sequence can also be set through the control system.
Including safety pre-clamping pressure
Scope of delivery for 2 sets:
- 2 pcs. (left/right) vertical swivel clamps
- 2 pcs. (left/right) horizontal clamps
Item 1.5 Article number 942.5241
DS350 table support, slotted (standard slot; special slots per customer specification upon request)
Item 3.1 Article number 945.2007
Packaging DS350 (transport frame)
-----
Total price for this configuration ex works – on request!
ALTERNATIVE OPTIONS, prices on request!
-----
For horizontal clamping of remnants when cutting square-cut glazing bars instead of
2nd set Item 1.3 943.5236 DS combined workpiece clamping!
Item 2.1 Article number 942.5201
ES / DS workpiece clamping from the front
- 2 pcs. anti-twist clamping cylinders
- 2 pcs. cylinder holders with clamping lever
-----
OPTIONAL accessories, at additional cost upon request:
-----
Item 4.3 Article number 942.5237
DS software “Overlength” (subsequent steps must be confirmed)
Process control incl. hardware. After input of a cutting length > max.
cutting length of the unit, the cutting will be cycle-controlled. (Left unit
cuts, right unit moves the material and cuts
to size.)
Gijdpfx Aeyy A Ikjf Sjr
Item 2.1 Article number 944.1023
GMF caliper 3000 mm complete set (1500 mm plus 1500 mm extension)
incl. charger and receiver.
A robust aluminium measuring rail with a measuring range of 3,000 mm is
ideal for measuring glazing bars.
Functionality:
For use on doors and large window sashes, the GMF caliper can be
safely and quickly mechanically extended up to a measuring length of 3,000 mm.
Base length: 1,500 mm
Extension: 1,500 mm, automatic...
Mali oglas
Günzburg
439 km
Tračna žaga
MEPShark 320 AXI
Pokliči
Stanje: rabljeno, Leto izdelave: 1997, Dimenzije tračne žage: 3150 x 25,4 x 0,9 mm
2 hitrosti: 20/40 m/min
Rezanje pri 90 stopinjah: okroglo 260 mm
Rezanje pri 90 stopinjah: kvadratno 250 mm
Rezanje pri 90 stopinjah: ploščato 320 x 200 mm
Rezanje pri 45 stopinjah: okroglo 230 mm
Rezanje pri 45 stopinjah: kvadratno 210 mm
Rezanje pri 45 stopinjah: ploščato 240 x 200 mm
Dodatki:
Gedpfeyyc A Iex Af Soir
-Set tračnih žag
Mali oglas
Nattheim
457 km
Stoječa žaga za plošče
StriebigControl Version 18 5216
Pokliči
Stanje: rabljeno, Leto izdelave: 2021, only 24 operating hours – like new
Base machine: 1 unit
Cutting Technology Meets the Future
The CONTROL has always defined its very own class—the premium class for vertical panel saws. Yet, even this advantage never stands still. We have expanded the CONTROL to become a premium-class vertical panel processing center, featuring increased automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and new machine software provide significantly improved operator comfort in every detail.
Saw Frame:
• Precision assembly of machine components to 1/100 mm tolerance
• Robust, self-supporting, fully welded, torsion-resistant saw frame
• Full-coverage support wall made of birch multiplex, with integrated small-parts shelf
• Auxiliary stop profile with own measuring tape and 3 auxiliary stops for repeat cuts
• Automatic detection of center support
• Automatic roller locking during sawing
Saw Beam:
• Rigid, durable steel saw beam construction
• Automatic saw beam locking with cut-line detection
Saw Unit:
• Play-free, smooth-running guides
• Robust support for the motor carriage ensures high cutting precision
• Powerful 5.5 kW (7.5 hp) motor with strong torque
• Increased comfort thanks to largely automated operation
• Laser-guided display of horizontal cut
• Automatic motor carriage clamping
• Automatic plunge and swivel of the saw motor
• Pneumatic clutch for easy switch to manual operation
• SUPERSILENT sound insulation to reduce saw blade noise
• Electromagnetic motor brake
Control:
• 12" touchscreen computer with optimal user guidance
• Multi-language interface
• Tool database guarantees high flexibility and absolute repeat accuracy
• Fully automatic sawing cycle
• Continuously adjustable feed speeds from 10–25 m/min
• Selectable saw cycle
• Panel end detection
• Constant return speed
• Operating hours counter
• Network connectivity
Dimension Setting:
• Digital measuring system DMS.x (horizontal axis for vertical cuts)
• Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts)
Design, Ergonomics:
• Typical STRIEBIG product design
• Multiple award-winning (incl. Design Award Switzerland)
• Function- and operator-oriented ergonomics
Installation:
• Wall-mounted or free-standing (optional)
Note:
Permissible ambient temperature: min. +5°C / max. +40°C
Relative humidity: 19–95%
In case of mains voltage fluctuations greater than +/-10% from the rated voltage, a voltage stabilizer must be installed at the installation site.
Type 5216
Cutting area: 4300 x 2160/2016 x 80 mm
• 1 unit
• Cutting length: 4,300 mm
• Cutting height, vertical cut: 2,160 mm
• Cutting height, horizontal cut: 2,016 mm
• Max. cutting depth: 80 mm
• Min. cutting depth: 4 mm (automatic feed)
• Min. cutting depth: 2 mm (manual feed)
Please refer to the catalogues or installation plans for exact installation dimensions.
ProLock Easy-Fix tool clamping system: 1 unit
Electronic positioning system “EPS” – X: 1 unit (horizontal axis for vertical cuts)
Paper holder: 1 unit
Small-part support made of aluminum (2-pieces): 1 set
Kit for free-standing installation (Type 5168, 5216, 5224, 6168, 6216, 6224): 1 set
Godpfx Afjyyqz Se Seir
Storage location: Customer
Mali oglas
Aichwald
513 km
Krožna žaga za lahke kovine in aluminij
BOMARAlu 500
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, Polavtomatska dvojna kotna krožna žaga za aluminij
Kot rezanja: 90° -45° desno/levo, -60° levo
Pogon: 4,0 kW-400 V/50 Hz
Hitrost rezila: 50 m/s
Dimenzije rezila: Ø 500 x 30 x 4,0 mm
Gijdpjy Av T Eefx Af Ser
Dimenzije: 1488x960x1540 mm
Višina mize: 1067 mm
Teža: 500 kg
Dodatna oprema:
- 5m dovni valjčni transporter, 230 mm
- 3m odvodni valjčni transporter, 230 mm z digitalnim merilnikom položaja
Olajšamo vam iskanje: "fretting žaga"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Fretting Žaga (3.716)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec






























































































































































































































