Fadal 3016 nakup rabljenega (8)

Stanje: zelo dobro (rabljeno), Naprodaj CNC vrtljiva miza priznane znamke Fadal Engineering (ZDA), model VH65. Profesionalna 4. os, namenjena obdelovalnim centrom, predvsem Fadal VMC, možna pa je tudi integracija z drugimi CNC stroji z ustreznim krmilnikom. Tehnični podatki: • Model: VH65 • Premer plošče: 165 mm (6,5”) • Prenos: 90:1 • Pnevmatska zavora (M60 VKLOP / M61 IZKLOP) • Industrijski več-pinski konektor • Serijska številka: 4630298. Stanje: rabljeno, mehansko brezhibno, običajni znaki uporabe. Trdna in težka konstrukcija – idealno za natančno 4-osno obdelavo. Dedpfx Apew R St Neljut

Stanje: zelo dobro (rabljeno), Na prodaj profesionalna CNC vrtljiva miza priznanega proizvajalca Fadal Engineering (ZDA, hčerinska družba Giddings & Lewis Inc.), model VH65. Opremljena s stružnim vpenjalom Röhm ZG Ø125 mm, kar bistveno poveča vsestranskost uporabe. Tehnične specifikacije: • Model: VH65 • Premer plošče: 165 mm (6,5”) • Prenos: 90:1 • Pnevmatska zavora (M60 VKLOP / M61 IZKLOP) • Stružno vpenjalo Röhm ZG Ø125 mm – maks. 4000 vrt/min, moment 80 Nm • Serijska številka: 6660297 • Industrijski večpin priključek Stanje: rabljeno, mehansko popolnoma delujoče, običajni znaki uporabe. Masivna, težka konstrukcija – jamstvo za natančnost in dolgo življenjsko dobo. Pripravljena za uporabo kot dodatna 4. os v obdelovalnem centru. Dsdpfxew R Syio Apleut

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 508 mm, pomik po osi Z: 508 mm, obremenitev mize: 1.652 kg, skupna masa: 4.990 kg, največja hitrost vretena: 8.000 obr/min, moč vretenovega motorja: 16.000 W, teža orodja: 6.800 g, število osi: 3, This 3-axis vertical machining center, FADAL 4020 FX, was manufactured in 2007. It features an impressive X-axis travel of 1,016 mm, a Y-axis travel of 508 mm, and a Z-axis travel of 508 mm. The machine offers a robust table size of 1,219 x 508 mm and a maximum table load of 1,652 kg. If you are looking for high-quality machining capabilities, you should consider the FADAL 4020 FX machine we are offering for sale. Contact us for further details. Dedpfxjyn Eh Ie Apleut • Table • Size: 48" x 20" (1,219 x 508 mm) • T-slots: 5 x 18 mm x 95 mm • Feed Rates • Cutting feed (X/Y/Z): 800 ipm (20.32 m/min) • Rapid traverse: 1,000 ipm (25.4 m/min) • Accuracy • Positioning accuracy: ±0.0002" (±0.0050 mm) • Repeatability: ±0.0001" (±0.0025 mm) • Spindle • Orientation: Electromechanical • Drive: AC vector drive • Power • Spindle motor: 17.75 HP (22.1 HP peak) • Torque: 39 ft-lbs (78 ft-lbs peak) • Optional high torque: 15 HP / 227 ft-lbs • Tool Changer (ATC) • Capacity: 21 tools (30 optional) • Selection: Random, bi-directional • Maximum tool diameter: 76 mm (114 mm without adjacent tools) • Maximum tool length: 381 mm • Machine Data • Power requirement: 76 A, 230 V, 3-phase • Air requirement: 120 psi, 15 scfm Technical Specification Taper Size ISO 40

Stanje: pripravljen za uporabo (rabljen), Vertikalni obdelovalni center Fadal, model VMC 4020FX, miza 1200x500 mm, hodi: X1000 mm, Y500 mm, Z500 mm. 10.000 vrtljajev/min, visokotlačno hlajenje skozi vreteno, vpenjanje vretena CAT 40. Menjalnik orodij s 24 mesti. CNC Fanuc tip Oi-MC. Dodpfx Aoympgfjpleut

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, - CNC Milling Machine Fadal, Model VMC 15XT A vertical machining center by Fadal, model VMC 15XT. Key specifications and features: Manufacturer/Model: Fadal VMC 15XT. Travel (typical for VMC 15XT): approx. 762 × 406 × 508 mm (X/Y/Z). Equipment: Automatic tool changer and precision machining spindle. Origin: Manufactured in the USA. - NDM-40 with Siemens SINUMERIK System 6 This machine comes from an industrial environment and features a robust build. It is equipped with a fully enclosed work cabin and a tool turret. Ideally suited for metalworking, workshops, training facilities or as a reliable production machine. Equipment: CNC control: Siemens SINUMERIK System 6. Tool turret. Fully enclosed cabin. Emergency stop and complete control panel. Built to industrial standards. Optical condition consistent with age (traces of use present, see photos). - CNC Lathe NDM-25 Dedpfoyl I Tusx Apljut Technical specifications and features of the Georg Fischer NDM 25 The NDM 25 is designed as a robust machine for precision manufacturing, including applications in the automotive and aerospace industries. Manufacturer: Georg Fischer (+GF+). Machine type: CNC lathe. Control: Often equipped with Siemens 820 T control, but some machines feature older controls such as General Electric or Kongsberg, which may have been retrofitted. Axes: 2 axes. Turning length: 600 mm. Swing over bed: 400 mm. Turret: 12 positions. Chuck capacity: 250 mm. Equipment: Typically comes with tailstock and chip conveyor. Availability and maintenance - CNC Lathe NDM-16 The NDM 16 is a CNC lathe manufactured by Swiss company Georg Fischer (+GF+) and typically fitted with Siemens control systems. Technical Details: The Georg Fischer NDM 16 is designed for shaft machining and is frequently used in industrial metalworking. Machine type: CNC lathe / turning center Manufacturer: Georg Fischer (+GF+), Switzerland Control: Various CNC controls have been used, including Siemens 840 C and older models such as General Electric Mark Century 1050 HL or Siemens Sinumerik 5 TS. Capacity: Maximum turning diameter up to 250 mm and turning length up to 800 mm depending on specific machine configuration. RhyMech AG lists specific capacities of 450 mm diameter and 500 mm length (170 x 500). Power: Rated at approximately 22 kW (30 HP). Tooling system: Features a turret disk with 12 VDI tool holders. The NDM 16 was manufactured in the 1990s and is now primarily found on the used machinery market. Note: There are other machines with a similar designation, such as the SCHIESS PENSOTTI NDM 160 vertical lathe—however, this is a different machine type. - EXCEL-810 CNC Vertical Machining Center "CNC" stands for Computerized Numerical Control, meaning the machine is computer controlled. "Vertical" refers to the orientation of the spindle, which is positioned vertically in this case. These machines are widely used in manufacturing and engineering for producing complex parts. Fully functional and equipped with various tools. Various tool holders and accessories available (see pictures).

Stanje: rabljeno, Leto izdelave: 1995, x-osovina 1000 mm y-osovina 500 mm z-osovina 500 mm CNC indeksna glava Broj osa: 4 Prihvat vretena: ISO 40 Površina stola: 1200x508 mm Upravljanje: Fadal CNC 88 HS Nosivost stola: 600 kg Brzina vretena: 40-7500 o/min Broj: 9505858 Mjenjač alata: 21 pozicija Tehnički podaci su informacije proizvođača ili operatera i za nas nisu obvezujuće. Zadržavamo pravo međuprodaje; vrijede isključivo naši opći uvjeti poslovanja i prodaje. O nama više od 400 vlastitih strojeva na lageru preko 15.000 m² skladišnog prostora, kapacitet dizalica 70 t više od 10.000 artikala dodatne opreme za vašu radionicu Ako želite prodati strojeve, proizvodne linije ili svoju firmu, Dusdpfxsyqwccj Apljt slobodno nas kontaktirajte. Dodatne ponude pronađite na našoj web stranici. Pregledi strojeva mogući su po dogovoru. Radujemo se vašoj posjeti. Vaš Markus Hirsch tim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Na voljo je CNC vertikalni obdelovalni center Fadal z večjim navorom. Pomiki X/Y/Z: 1140mm/635mm/610mm, dimenzije mize X/Y: 1350mm/635mm, hitri pomik X/Y: 25m/min, hitri pomik Z: 17m/min, maks. podajalna hitrost: 15m/min, natančnost pozicioniranja: +/-0,004mm, ponovljivost: +/-0,0015mm, hitrost vretena: 10.000 obr/min, vpenjalni sistem orodja: SK40, maks. navor vretena: ca. 360Nm, število orodnih mest: 24. Dimenzije stroja X/Y/Z: ca. 3300mm/2600mm/3050mm, teža: ca. 6000kg, krmilje: Siemens. Dokumentacija na voljo. Možen ogled na lokaciji. Dujdeyhgpgjpfx Apljt

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 500 mm, pomik po osi Z: 700 mm, Naprodaj: Fadal VMC 4020 vertikalni obdelovalni center Dobro opremljen in zanesljiv vertikalni obdelovalni center – idealen za natančno proizvodnjo in orodjarno. Tehnične specifikacije: Vreteno: BT-40, 10.000 vrt/min, 22 KM Pomiki: X = 1.016 mm (40"), Y = 508 mm (20"), Z ≈ 700 mm (podaljšana Z-os) Velikost mize: 1.219 × 508 mm (48" × 20"), nosilnost 680 kg Duedpfx Apsxp Unxelst Menjalec orodij: 24-pozicijski avtomatski menjalec orodij (ATC) Krmiljenje: Fadal 32MP – zanesljivo in enostavno za uporabo (združljivo s FANUC G-kodami) Stroj je opremljen s podaljšano Z-osjo za večjo prilagodljivost in je primeren za širok nabor obdelovalnih nalog.