Elektro Verižnih Dvigalo 250 Kg nakup rabljenega (78.453)

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), številka stroja/vozila: BO844, DEMAG KBK Crane Ceiling / Crane Runway with approximate dimensions 8 x 5.5 m (5.5 m bridge) This crane is available multiple times! Load capacity / Lifting capacity 500 kg - 0.5 t Technical data of the system: Crane runway made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, carriages, end plates, brackets/hangers, etc. The crane is equipped with an internal power supply Including 500 kg Demag electric chain hoist - lifting height approx. 4 m The crane is dismantled and available immediately Used condition, see pictures Hsdoupvycspfx Agxsl Item location: 75053 Gondelsheim Shipping via freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with capacities from 125 kg to 1,600 kg also available. Please inquire without obligation for a crane runway with your required load capacity and dimensions.

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), številka stroja/vozila: BO873+846+847, DEMAG KBK crane runway "Kranhimmel" with dimensions approx. 9x7m (7m bridge) Hedpfjtz R Thjx Agxol Multiple units of this crane available! Load capacity / Lifting capacity: 250 KG - 0.25 t Technical Specifications: - Crane runway with Demag KBK2 rails Complete system package includes: KBK rails, rail connectors, trolleys, end plates, brackets/hangers, etc. The crane is equipped with internal power supply Incl. 250KG Demag electric chain hoist – Lifting height approx. 4m Crane is dismantled and immediately available Used condition, see photos Item location: 75053 Gondelsheim Shipping via freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems available. Load capacities from 125KG to 1600KG Please enquire about crane runways with your required load capacity and dimensions – no obligation.

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), številka stroja/vozila: BO8xx, DEMAG KBK overhead crane runway, approx. 6x5m (5m bridge) Multiple units of this crane available! Load capacity / lifting capacity: 500 KG - 0.5t Technical data: Crane runway made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, carriages/trolleys, end plates, brackets/hangers, etc. Crane features integrated power supply Including 500 KG Demag electric chain hoist – approx. 3.5m lifting height – with raised trolley Hedsupvyvopfx Agxsl Crane is dismantled and available immediately Used condition, see photos Item location: 75053 Gondelsheim Shipping by freight forwarding or pickup by appointment only Demag KBK1, KBK2, and KBK3 rails available from stock! Other KBK systems also in stock. Load capacities from 125 KG to 1600 KG. Please send an enquiry with required crane runway load capacity and dimensions for a non-binding offer.

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBUT133-875, DEMAG KBK Crane System with Crane Runway, Dimensions approx. 9x5 m Hedpfx Ajty Sxksgxel Load Capacity / Lifting Capacity: 250 kg - 0.25 t Technical Data of the System: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable trolley system, brackets/hangers, etc. Including 250 kg electric chain hoist (lifting height approx. 5 m) The crane is dismantled and available immediately Used condition, see pictures Location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with capacities from 125 kg to 1,600 kg are also available. Please inquire about your crane runway with required load capacity and dimensions without obligation.

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBUT133-997, DEMAG KBK Crane System, Crane Runway approx. 4x6m (6m Bridge) Load Capacity / Lifting Capacity: 250 KG - 0.25 t Technical Data of the System: Crane runway made from Demag KBK2 track profiles The system is delivered complete: KBK profiles, rail connectors, trolleys, end plates, cable festoon system, brackets/hangers, etc. Including steel 250KG chain hoist – lifting height approx. 5m Crane is dismantled and available immediately Used condition, see pictures Item location: 75053 Gondelsheim Hsdpety Sxqefx Agxel Shipping by freight carrier or collection only by appointment Demag KBK1, KBK2, and KBK3 profiles are in stock! Other KBK systems available. Load capacity from 125KG – 1600KG Please inquire about your crane runway with required load capacity and dimensions, no obligation.

Leto izdelave: 2002, stanje: dober (rabljeno), številka stroja/vozila: RHKBK250KG, DEMAG KBK Crane System - Crane Runway, Approx. 6x5m Rated Load / Lifting Capacity: 250 kg (0.25 t) Technical Data of the System: - Crane runway constructed from Demag KBK2 profiles - System is delivered as a complete package: KBK rails, rail connectors, trolleys, end plates, cable festoon, brackets/hangers, etc. - Includes Demag DK 250 kg chain hoist Hsdpfx Agorft Nhexel The crane is dismantled and immediately available Used condition, see photos Item location: 75053 Gondelsheim Shipping by freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 profiles are in stock! Other KBK crane systems also available. Capacity range: 125 kg – 1600 kg. Please inquire without obligation with your required runway capacity and dimensions.

Leto izdelave: 1995, stanje: dober (rabljeno), številka stroja/vozila: TH2001/0165-0166, DEMAG KBK Crane System, Crane Runway, with Dimensions approx. 9x7m (7m Bridge) Multiple units of this crane are available! Load capacity / lifting capacity: 500 KG - 0.5 t Technical specifications of the system: Crane runway made from Demag KBK1+2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers, etc. Including 500kg Demag DK2 chain hoist – lifting height approx. 3.5m Crane has been dismantled and is available for immediate delivery Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or pickup strictly by appointment Hedpfevdncvjx Agxol Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity from 125 KG to 1600 KG. Please make a non-binding inquiry for your crane runway with requested load capacity and dimensions.

Leto izdelave: 1977, stanje: dober (rabljeno), številka stroja/vozila: TH2001/180, DEMAG KBK Crane System, Crane Runway approx. 3x7 m (7 m bridge) Multiple units of this crane available! Load Capacity / Lifting Capacity: 500 KG – 0.5 t Technical Specifications of the System: Crane runway made from Demag KBK2 profiles System is delivered complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers, etc. Including 500 kg steel chain hoist – lifting height approx. 3.5 m Crane is dismantled and available immediately Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 profiles kept in stock! Hodpfx Asvdmndogxol Other KBK systems with load capacities from 125 kg to 1600 kg available as well. Please inquire about your required crane runway specifying load capacity and dimensions, free of obligation.

Leto izdelave: 1977, stanje: dober (rabljeno), številka stroja/vozila: TH2001/0171-0173, DEMAG KBK Crane System, crane track with approximate dimensions of 10x7 m (7 m bridge) Hodpfxsvdnive Agxjl Multiple units of this crane are available! Load capacity / lifting capacity: 500 kg (0.5 tons) Technical specifications of the system: Crane runway made from Demag KBK1+2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers, etc. Including 500 kg steel chain hoist – lifting height approx. 3.5m Crane has been dismantled and is available immediately Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarding or collection by appointment only Demag KBK1 KBK2 and KBK3 rails are kept in stock! Other KBK systems are also available. Load capacity 125 kg – 1600 kg Please enquire about your required crane runway with load capacity and dimensions – no obligation.

Stanje: rabljeno, Leto izdelave: 1972, številka stroja/vozila: ROD24, 1 Demag KBK II stenski vrtljivi žerjav, nosilnost / dvižna teža 250 kg Izmet 4 m, nosilnost 250 kg z Demag PK verižnim dvigalom, nosilnost 250 kg Hedpfx Aoxmuuaegxsl Teža vključno s stensko konzolo (nov datum) približno 350 kg Komplet z verižnim dvigalom, kabelsko verigo, vozičkom in drobnim materialom Kot vrtenja 270° Lokacija artikla je 75053 Gondelsheim Naprava je popolnoma razstavljena in takoj na voljo Pošiljanje preko špedicije ali osebni prevzem Stroški pošiljanja po dogovoru glede na poštno številko

Leto izdelave: 1985, stanje: zelo dobro (rabljeno), številka stroja/vozila: (20020324 EG) - VK-RES, DEMAG KBK Crane Ceiling & Crane Runway, approx. dimensions 16.5 x 7 m (7 m bridge – double-girder crane) Load capacity / lifting capacity: 500 kg – 0.5 t Technical details of the system: Crane runway made from Demag KBK2 profiles The system is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable drag chain, supports/hangers, etc. Incl. Demag PK2 500 kg electric chain hoist – lifting height approx. 4.5 m Crane is dismantled and immediately available Hsdpfx Aoty S I Esgxel Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 profiles are in stock! Other KBK systems also available, with capacities from 125 kg up to 1600 kg. Please feel free to inquire for your required crane runway with load capacity and dimensions.

Stanje: dober (rabljeno), Leto izdelave: 1977, številka stroja/vozila: TH2001/0171-7548 /// RES !, DEMAG KBK stropni žerjav Žerjavna proga z dimenzijami cca 15x7m (7m most) Nosilnost / dvižna zmogljivost 500 KG – 0,5 t Tehnični podatki naprave: Žerjavna proga iz Demag KBK1+2 tirnic Sistem je dobavljen popoln: KBK tirnice, spojniki tirnic, vozički, končne plošče, nosilci/obešala itd. Vklj. 500kg Demag DK verižni dvigalo (ni kot prikazano DC) – višina dviga cca 3,5m (verižni dvigalo je novejše kot žerjav) Žerjav je razstavljen in takoj na voljo Rabljeno stanje, glejte slike Lokacija artikla je 75053 Gondelsheim Dostava preko špedicije ali osebni prevzem samo po dogovoru Demag KBK1 KBK2 in KBK3 tirnice so na zalogi! Na voljo so tudi druge KBK naprave. Nosilnost 125kg – 1600kg Hsdpfx Agovdndaoxsl Prosimo, pošljite nezavezujoče povpraševanje za vašo žerjavno progo z nosilnostjo in dimenzijami.

Stanje: skoraj kot novo (rabljeno), Jeklene konstrukcije - 2,50 PLN na kg Hodpsy H Eu Tofx Agxjl

Stanje: skoraj kot novo (rabljeno), Popolnoma obnovljen Cena: 5.500 EUR Spiralni mešalnik za testo Hjdpfx Aox N Ed Tsgxjl Kapaciteta: 100 kg moke 160/180 kg testa Diosna Prostornina posode: 260 litrov Električna moč: 380V / 50Hz / 3N/PE Dva časovnika Dve hitrosti Možnost vzvratnega hoda Polovični pokrov z varnostnim stikalom Kolesa z zavorami

Stanje: skoraj kot novo (rabljeno), Stroj po splošni obnovi Cena: 4.500 EUR Mešalnik za testo Z lopatico Kemper Stroj ima 2 hitrosti Posoda in mešalo iz nerjavečega jekla Mobilna enota na kolesih Avtomatski časovnik Hjdpfx Aox N Efqsgxjl Prostornina: 180 litrov / 120 kg testa ali 75 kg moke

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation Hsdpfsng Exaex Agxol • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: Hedpfxondn Agj Agxsl • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: Hjdpfx Agjnh R Ekexol • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine Hsdpfxenfvx Nj Agxel • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V Hedpfx Aendk N Aegxel • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: Hsdpfxsng Amke Agxel • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left Hjdeng A R Sepfx Agxsl • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. Hedsnfvy Uspfx Agxol POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 20 - 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there are also ample possibilities for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the stable and robust construction of the mandrel carrier and bending arm, contribute to the desired bending results. Quick-change bending tools allow rapid conversion to different tube dimensions. The clamping pressure for tube securing is optimally adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angles, lengths, and rotation angles for up to 50 bend sequences per tube. For monitoring spring-back values, a freely programmable database is available for up to 200 materials. The control offers two operation modes: In "Simple Bending", tube segment lengths and rotation are automatically displayed in relation to each other. In "Controlled Bending" mode, data is entered beforehand and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gearbox-assisted positioning for length and rotation. POTENTIAL APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metalworking • Prototype construction • Piping installation TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radii: 1.5 x Ø (Standard: 2 x Ø) • Multifunction machine control for angle adjustment (0.1°) • Mandrel bar lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600-3200 kg (depending on version) • Ergonomic operation via safety foot pedal OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops using foot pedal • Semi-automatic length and rotation positioning using servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to perform test production at our in-house demo room • Consultation and information meetings at your site • Leasing/financing advice and processing via JUTEC Hsdpfx Agenh R Suexjl • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Hedpfxjng Ax Se Agxsl Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site