Dozirna Naprava nakup rabljenega (5.662)

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, 1. Manufacturer • Manufacturer: Karl Eugen Fischer GmbH 2. Machine Identification • Machine Type: Adhesive Tape Applicator with Ply Cutter • Model: HTBC • Year of Manufacture: 2005–2015 (series production range) 3. Intended Use • Cutting and application of rubber strips and/or ply material • Designed for use in tire manufacturing and rubber processing 4. Mechanical Design • Heavy-duty steel frame construction • Industrial green finish • Elevated operator platform with integrated access stairs Gjdpfx Aex Iuf Rodxstt 5. Conveying and Material Handling • Wide flat-belt conveyor system for continuous transport of rubber sheets • Conveyor system integrated into the cutting and application process 6. Winding and Unwinding System • Overhead and lower roller stations • Designed for handling liner and ply material • Configured for controlled unwinding and winding operations 7. Electrical Equipment • Power Supply: 400 V / 50 Hz • Control Cabinets: – Large, free-standing grey control cabinet array – Integrated air conditioning system 8. Safety Equipment • Yellow safety fencing • Mechanical safeguarding of hazardous areas

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 900 mm, Travel Paths: X-axis (longitudinal): 3200 mm Y-axis (transversal): 2100 mm Gtedpfx Adex H Srlexet Z-axis (vertical): 900 mm Working Area: Table clamping surface: 3000 x 1700 mm Spindle nose to table: 66 – 966 mm Table load capacity: 11,000 kg 5-Axis Fork Head: Tool holder: HSK 63 A C-axis (4th axis): +/- 360° B-axis (5th axis): +100° / -110° Main Drive: Drive type: Motor spindle Drive power: 63 kW Spindle Speed: Spindle speed: 18,000 rpm Torque: 106 Nm Max. Rapid Traverse Rate: X- and Y-axes: 15,000 mm/min Machine Weight: 37,700 kg Equipment: HURCO CNC Machining Center DCX 32-5 Si (ATC 60) with MAX5 Control - AXS control with removable electronic handwheel - Pentium technology, SSD (solid-state drive) storage, 2 GB RAM, Ethernet interface, USB interface, built-in self-diagnostics, WINDOWS platform - Synchronous tapping (tapping without floating chuck) - 60-station tool changer - 5-axis fork head - Motor spindle - Spindle cooler - Chip conveyor 5-axis simultaneous machining, enables the simultaneous movement of 4 or 5 axes in NC operation.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1996, Filtrirna naprava/odpraševanje Proizvajalec: Lühr Tip: MWF 2,5/6,5/2,0 Leto izdelave: 1996 Dodatki: Izpušni ventilator Tip: 112/400-4-R Leto izdelave: 1996 Gjdpfxox N I Afs Adxett 2 x polžasti transporter Kanalni sistemi

Stanje: novo, številka stroja/vozila: WKA 10+, Klimatska naprava iz čistega prostora za plastično medicinsko tehniko. 3 popolnoma novi aparati. Shranjeni kot rezervni v skladišču vzdrževanja. Gtedpfjxau U Tox Adxjt

Stanje: rabljeno, Leto izdelave: 2009, 1 kos mobilne kompleta kompresorske naprave SCHNEIDER MAS650-10-90D-SILEND premična, sesalna zmogljivost 650 l/min, polnilna zmogljivost 520 l/min, nazivna moč motorja 4 kW, napetost 4 kW, skladno s slikami in ogledom Barva: siva Gtsdpfx Adox Ifp Toxst Leto izdelave: 2009 Stanje: rabljeno Način plačila: predplačilo z nakazilom Lokacija blaga: delavnica Dostava: Samo osebni prevzem – Dostava za ta artikel ni mogoča!

Leto izdelave: 2001, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11090, Nous proposons cette installation de PVD à pulvérisation magnétron CemeCon CC 800/9 SINOX d’occasion, année 2001. Fabricant : CemeCon Modèle : CC 800/9 SINOX Numéro de série : 11090 Année de fabrication : 2001, dernière mise à niveau en 2023 Puissance KVA : 140 kW Évaporateurs : 4 Tension : 3×400/N/PE Fréquence : 50/60 Hz Gtedpfx Adsx Tup Hoxot CemeCon CC800/9 SINOX - 4 cathodes - Toutes les cathodes peuvent être en DC ou impulsion MF - Anodes - 5 gaz (dont 1 inflammable) - BIAS : DC ou impulsion MF - Chauffage - 2 pompes turbomoléculaires - Plateau à 6 positions - Nombreuses cibles - Nombreux accessoires, comme du matériel de chargement, des pièces de rechange et des consommables - En 07/2023, la commande de l’installation a été mise à jour et un entretien constructeur a été effectué. Un lot comprenant un groupe d’eau glacée, une unité de nettoyage de précision pour substrats et une machine de rodage/polissage peut également être proposé. Pour toute question ou information complémentaire, n’hésitez pas à nous contacter par message ou à nous appeler.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, 1. Električne in zmogljivostne specifikacije • Nazivna moč: 22 kW • Napajanje: 400 V / 50 Hz • Nazivni tok: 35 A 2. Pnevmatski sistem • Delovni tlak: 4–10 bar 3. Krmilni in operacijski sistem • Upravljalna enota (HMI): Allen-Bradley PanelView 550 • Krmiljenje rentgena: Gulmay MP1 krmilni protokolni krmilnik 4. Sistem za generiranje rentgenskega sevanja • Visokonapetostni generator: Gulmay FC160-1/2 • Izvedba: Mobilna enota • Država proizvodnje: Anglija 5. Pohištvo in varnostna oprema • Popolnoma zaprte, radiacijsko zaščitene kabine • Barva kabine: bela/modra • Integriran varnostni zaklepni sistem 6. Sistem za transport materiala • Integriran motoriziran valjčni transporter • Transportni trak konfiguriran tako za dovod kot za odvod materiala 7. Električna inštalacija • Zunanji sistem krmilnih omar Gjdsx It Uqjpfx Adxett • Večvratna omarna banka • Proizvajalec krmilne omare: Rittal

Leto izdelave: 2005, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 05071232191, Na prodaj je naša valovna spajkalna naprava Seho (brez kositra). Tip: MWS 2340. Stanje: zelo dobro in popolnoma delujoče. Vključuje: fluxer, 2 x dvigalo, vogalni pretvornik, 8,50 m transportnega traku, 1 x spajkalni lonec, 2 x pogon za črpalko, 2 x valovna spajkala. Tip valovnega spajkala: Wörthmann 3/5. Naprava je še nekaj tednov lahko ogledna v proizvodni liniji. Edina pomanjkljivost: majhne razpoke na steklu na fotografiji št. 4. Godpfx Adsw Rl S Eoxott

Stanje: dober (rabljeno), Naprava za obračanje posod, varilni rotator, valjčna klop, rotatorji, naprava za ravnanje cevi Godpfewyt Smox Adxett - Naprava za obračanje posod: 4 kosi - Valji: Ø 75 x 28 mm, plastika - Razmak med valji: 95 mm - Okvir: aluminijasta litina - Prodaja/cena: komplet - Dimenzije (vsak): 230/185/H90 mm - Teža: 14,4 kg

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 88.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Kogenerator na bioplin Znamka: Jenbacher Model: JMS 416 (1189 kW) Leto izdelave: 2014 Gtodsx R Tp Hepfx Adxjt Gorivo: bioplin Zgodovina vzdrževanja: celoten servis pri 62.859 urah avgusta 2022 Video delovanja na voljo Za več informacij nas kontaktirajte

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Takoj na voljo na lokaciji: Gtodpfxex Tq Dto Adxjt Kaltenbach žaga – vrtalna naprava Tip KBS 750 DG plus APS 1050 Letnik 2002 Triosna vrtalna postaja, opremljena z NENOK hladilnimi svedri Dovodna valjčna proga 16 m Odvodna valjčna proga 12,5 m Centralno upravljanje obnovljeno pred 2 leti Cena: 58.000 EUR + DDV, ex works

Leto izdelave: 2006, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11176, We offer this used CemeCon CC 800/9 HIPIMS magnetron sputter PVD system, year of manufacture 2006. Manufacturer: CemeCon Model: CC 800/9 Serial number: 11176 Year of manufacture: 2006, upgraded in 2013 and 2025 Weight: 3000 kg Protection class: IP 20 Power: 166 kVA Evaporators: 6 Voltage: 3×400/N/PE V Frequency: 50/60 Hz Gjdpfox Tt T Rox Adxott CemeCon CC800/9 HIPIMS - 6 cathodes - All cathodes DC, with 2 HIPIMS - Booster anodes - 4 gases, 1 flammable - Bias: DC, MF-pulsed, or HIPIMS - 3x heating system - 2 turbopumps - 6-position substrate table - Multiple targets - incl. option for BNC extraction of Peak I, U, and P at HIPIMS cathodes + BIAS - Extensive accessories such as loading materials, spare parts, and consumables - 07/2023: system control upgraded to latest standard and serviced by manufacturer. A package deal including a chiller unit, precision substrate cleaning system, and lapping/polishing machine is also available. If you have any questions or require further information, please send us a message or call us.

Stanje: rabljeno, Technical details: Thread size: 14-30 Mounting shank: 50 Weight: 20 kg This is an SPV thread cutting head for up to M 30, supplied in a box with various tool holders. Spindle mount: ISO 50 Gedovb A Smspfx Adxott

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, Filtrirna naprava Ammann AFA 77 Gtsdpfx Adsx N Iaqjxet Letnik 2010 brez polžastih transporterjev Izpušni ventilator Ammann Tip 540 CW380 Letnik 2018 brez dimnika na voljo od 01/2026

Stanje: dober (rabljeno), Naprava za obračanje posod, varilni rotator, valjčni podstavek, rotatorji, naprava za ravnanje cevi - Naprava za obračanje posod: 2 kosa - Valji: Ø 100 x 37 mm plastika - Dostava/cena: kompletno - Dimenzije posamezno: 260/230/H115 mm Gtjdpfx Ajwypa Hodxjt - Teža: 3,4 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, A pressure cabin washer made of high-quality stainless steel is a tool that sets new standards in cleaning technology. Designed for professional use, this washer offers reliability, durability, and high performance. Made from premium-grade stainless steel, it ensures longevity and resistance to environmental factors, guaranteeing prolonged efficiency even under the most demanding working conditions. Device Description: Gtodpouc Tpyjfx Adxst Thanks to its robust stainless steel construction, our cabin washer is corrosion-resistant and delivers long-term performance even in challenging environments. Equipped with advanced pressure technology, it effectively removes dirt, oil, grease, and other contaminants from various surfaces. Our pressure cabin washer is an essential tool for businesses that value cleanliness, efficiency, and reliability. It makes cleaning tasks easier, faster, and more effective, leading to higher customer satisfaction and improved work productivity. Washing is performed in a closed circuit using a cleaning fluid heated up to 70°C. The agent is sprayed from the pistol nozzle under a pressure of up to 8 bar, efficiently cleaning hard-to-reach areas and heavily contaminated parts from carbon deposits, greases, and oils. Both temperature and cleaning fluid enhance the washing efficiency. The machine features adjustable feet and leveling controls. The washer is equipped with a dual-function gun, which can dispense either air alone or air mixed with cleaning agent. This allows the washed item to be dried using compressed air. Benefits of using a stainless steel pressure cabin washer: 1. With high water pressure combined with detergents, the washer removes even the most stubborn contaminants such as oil, grease, or rust, leaving surfaces clean and shiny. 2. The cabin washer enables quick and efficient cleaning of larger surfaces in less time compared to traditional manual cleaning methods. 3. Thanks to various pressure setting options, the washer can be adapted to different surface types and contamination levels, making it a versatile cleaning tool. 4. Constructed from high-quality stainless steel, the washer is resistant to corrosion and mechanical damage, ensuring long service life and minimizing maintenance needs. 5. The cabin washer is easy to operate, allowing operators to quickly learn its use and achieve professional results without extensive training. 6. With fast and effective cleaning, the cabin washer increases work efficiency, which can lead to time and cost savings for businesses. Investing in a stainless steel pressure cabin washer is not only an investment in cleanliness but also in efficiency and durability, translating into benefits for both companies and individual users. MP180 Washer Parameters: Tank capacity: 180 l Frequency: 50 Hz Weight: 56 kg Voltage: 230 V Height with legs: 1450 mm Height without legs: 920 mm Internal width: 740 mm Internal height (to open lid): 410 mm Internal depth: 500 mm Load height: 360 mm Load width: 700 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 17.300 h, Rabljena hladilna naprava švicarskega podjetja: TOOL TEMP AG Godpfx Asx Tr I Hjdxstt Model: TT 54000 Leto izdelave: 2008 Delovne ure: 17.300 Lokacija: Zgornja Frankovija _____ Veljajo naši Splošni pogoji, prodajalec ne odgovarja za napake pri pisanju ali prenosu podatkov. Podatke in slike nam je posredoval lastnik ter jih odobril za objavo. Videz ponujenih artiklov ustreza njihovi starosti in prikazanim slikam. Tehnično stanje in obraba ustrezata starosti artiklov. Rabljeni stroji se prodajajo izključno pravnim osebam in brez garancije.

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 5.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W09522217F2D38510, skupna masa: 9.000 kg, skupna širina: 7.500 mm, skupna dolžina: 12.000 mm, transportna širina: 2.500 mm, transportna dolžina: 9.500 mm, transportna višina: 3.600 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Naprodaj je Doppstadt SM518 Plus iz prve roke Letnik 2015 5800 delovnih ur Centralno mazanje Stroj je pripravljen za delo, nekatere dele bi bilo treba obnoviti Celotna dokumentacija na voljo, na zalogi različni rezervni deli V ceno so vključeni 3 bobni z mrežo 10mm, 20mm in 40mm ter debelino 8mm Za vprašanja smo na voljo Cena je neto in po dogovoru Ogled na lokaciji je možen in priporočljiv Možen prevoz po celem svetu Gtodpfx Adox Sr Hmsxot

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to find out more! The offer pertains to the basic version of the machine. All optional equipment and their prices can be found on our website. CNC Plasma-Oxyfuel Cutting Machine PCV-3015-DG The machine was designed and manufactured in Poland. Technical specifications: - X and Y working area: 1520 x 3100 mm - Clearance between table surface and gantry: 240 mm - Maximum height of profile to be cut: 200 mm - Rapid traverse speed (Cutting speed depends on the power of the plasma source and the thickness of the material to be cut.): 25,000 mm/min - Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200 Construction parameters: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total weight: 1,200.0 kg - Maximum load capacity: 2,500.0 kg - Adjustable support feet: 6 Systems: GCS - Gas Cutting System – integrated oxy-fuel cutting system allowing for cutting of sheets up to 150 mm thick. THC - Torch Height Controller – integrated height control system that automatically adjusts the torch distance to the material based on the analysis of source voltage fluctuations. AMS - Align Material System – automatically corrects material angle information relative to the table. Come and test our machines Take part in an exclusive demonstration where a qualified Otinus technician will showcase the full functionality of the machine. In addition, you can test how the unit meets your needs. You are welcome to provide technical drawings and material samples. Otinus Academy learning software (optional) This is a continually expanding e-learning platform created for Otinus customers. With the purchase of this unit, you will receive one year’s access to online courses, enabling you to easily onboard new employees or refresh training knowledge! Gtedpfx Asrp Dmbedxjt On-site commissioning and operator training (optional) - Day 1 (up to 8 hours) – installation of the machine and training on using the control system. Technical support by a specialist (optional) - By phone: 7:30 AM to 9:00 PM (Mon-Sat) – an 8-hour package to be used within 12 months. - Online: 7:30 AM to 2:30 PM (Mon-Fri) – an 8-hour package to be used within 12 months. Access to Otinus Academy online courses (optional) - MyPlasm – access for 12 months - LibreCad – access for 12 months

Stanje: novo, Leto izdelave: 2024, CNC Plasma/Flame Cutting System PCO-3020-DG The machine was designed and built in Poland. Technical Specifications - X and Y working area: 2020 x 3100 mm Godeh E Izbjpfx Adxott - Clearance between table surface and gantry: 240 mm - Maximum height of the profile to be cut: 200 mm - Rapid traverse speed (cutting speed depends on plasma source power and material thickness): 25,000 mm/min - Compatible with Hypertherm Powermax 45–125 plasma sources and Hypertherm MAXPRO200 Construction Data: - Length: 3,650 mm - Width: 2,780 mm - Height: 1,500 mm - Total weight: 1,550.0 kg - Maximum load capacity: 2,800.0 kg - Adjustable support legs: 6 Systems GCS – Gas Cutting System – Integrated oxy-fuel cutting system enabling plate cutting up to 150 mm thick THC – Torch Height Controller – Integrated torch height control system automatically adjusts torch distance to the material, based on analysis of arc voltage fluctuations AMS – Align Material System – Automatically corrects material angle information relative to the table Visit and test our machines Attend an exclusive demonstration led by a qualified Otinus technician, who will showcase the full functionality of the machine. Additionally, you can test the device’s suitability for your tasks. Technical drawings and sample material can be provided. Otinus Academy Learning Software (optional) This is a continuously developing e-learning platform created for Otinus customers. With purchase of this device, you receive one year of access to online courses, enabling you to easily onboard new staff or refresh training knowledge! On-site Commissioning and Operator Training (optional) - Day 1 (up to 8 hours): Machine installation and training on control system operations. Telephone Support by a Specialist (optional) - Phone: 07:30–21:00 (Mon–Sat) – an 8-hour package to be used within 12 months - Online: 07:30–14:30 (Mon–Fri) – an 8-hour package to be used within 12 months Access to Otinus Academy Online Courses (optional) - MyPlasm – Access for 12 months - LibreCad – Access for 12 months

Stanje: novo, Leto izdelave: 2024, CNC Plasma Cutting System PCO-2010-D The machine was developed and manufactured in Poland. Technical Specifications - X and Y working area: 1020 x 2100 mm - Clearance between table surface and beam: 240 mm - Maximum profile height to be cut: 200 mm - Rapid traverse speed (cutting speed depends on the plasma source power and the thickness of the material being cut): 25,000 mm/min - Compatible with Hypertherm Powermax 45-125 plasma sources, and Hypertherm MAXPRO200 Construction Parameters: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total weight: 800.0 kg - Maximum load capacity: 800.0 kg - Adjustable support feet: 4 Systems THC – Torch Height Controller – integrated cutting height control system automatically adjusts the torch distance to the material based on analysis of changes in source voltage. AMS – Align Material System – automatically corrects material angle information relative to the table. Visit and test our machines Take part in an exclusive demonstration where a qualified Otinus technician will showcase the full functionality of the machine. Additionally, you can try out how the unit suits your requirements. You are welcome to provide technical drawings and materials for sample processing. Otinus Academy Learning Software (optional) This is a constantly expanding e-learning platform designed specifically for Otinus brand customers. By purchasing this unit, you receive one year of access to online courses, enabling you to train a new employee with ease or refresh your knowledge from previous training sessions! On-site commissioning and operator training at the customer's premises (optional) - Day 1 (up to 8 hours) – machine installation and training in the use of the control system. Telephone support by a specialist (optional) - By phone: from 7:30 am to 9:00 pm (Mon-Sat) – an 8-hour package to be used within 12 months. - Online: from 7:30 am to 2:30 pm (Mon-Fri) – an 8-hour package to be used within 12 months. Access to Otinus Academy online courses (optional) Gedpeh E Iytofx Adxstt - MyPlasm – access for 12 months - LibreCad – access for 12 months

Stanje: novo, Leto izdelave: 2024, Handheld Laser Welding Machine LWH-1000-N Gefasst SUP 20S Scope of Delivery: - Laser welding machine with cooling system - Welding torch with adjustable focal length and accessory kit - MAX Photonics fiber laser source - Automatic wire feeder - Hose and cable set - Starter package with nozzles and protective lenses Technical Parameters - Laser power: 1000 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 230 Hz - Dimensions (with head mount): 630x1300x1500 mm Included in the Price Gtodpfxjhufige Adxot One-day operator training and machine commissioning - Day 1 (up to 8 hours) – Commissioning and training Gefasst SUP 20S Welding Head – Welding and Cutting Otinus laser welding machines are supplied with a range of nozzles and protective lenses. This makes the device extremely versatile and saves money, as the need to purchase a handheld plasma cutter, for example, is eliminated. Operation Thanks to the revolutionary welding system, any user can achieve excellent results after a brief training period. The cable enables the welder to work flexibly at multiple locations without having to move the machine. The small heat-affected zone prevents excessive deformation. The weld seam is produced quickly and efficiently, resulting in a strong and precise weld connection. Intended Use The laser welding unit is designed for professional applications in workshops that require high-quality and visually appealing welds. Laser Source Specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminum: 2 mm - Brass: 0.8 – 1 mm 1500 W - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminum: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminum: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminum: 7 mm Construction The torch cable allows for great freedom of movement and facilitates welding in various positions. The integrated controller with a large, user-friendly display is intuitive to operate. The unit is equipped with a high-performance cooling system, ensuring reliable operation in demanding environments and 24/7 shift work. Operating Principle The laser welding machine melts the welding wire and the edges of the components to be joined using laser heat. The laser beam is focused and directed towards the welding wire, which is fed through the automatic feeder, and onto the joint area. When the trigger is pressed, the welding torch must be moved along the weld seam in accordance with the wire feed speed. Consistent operating temperature for the laser source and torch is maintained by a water-cooling system. The beam output and cooling are managed by a controller, which adjusts parameters as set by the operator.

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to find out more! The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website. CNC Plasma Cutting System PCO-3020-D The machine was designed and manufactured in Poland. Technical Specifications - X and Y working area: 2020 x 3100 mm - Clearance between table surface and beam: 240 mm - Maximum profile cutting height: 200 mm - Rapid traverse speed (Cutting speed depends on the plasma source output and the thickness of the material to be cut.): 25,000 mm/min - Compatible with Hypertherm Powermax 45-125 plasma sources, and Hypertherm MAXPRO200 Construction Parameters: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total weight: 1450.0 kg - Maximum load capacity: 2000.0 kg - Adjustable support legs: 6 Systems THC – Torch Height Controller – integrated torch height control system automatically adjusts the torch-to-material distance based on the evaluation of source voltage fluctuations. AMS – Align Material System – automatically corrects sheet alignment information relative to the table. Come and test our machines Take part in an exclusive demonstration, where a qualified Otinus technician will walk you through the full functionality of the machine. You can also try out how the device fits your needs. Feel free to bring technical drawings and sample materials. Otinus Academy Learning Software (optional) This is a continuously expanding e-learning platform created for Otinus customers. When purchasing this device, you receive one year of access to online courses, enabling you to easily onboard new staff or refresh previously acquired knowledge! On-site Commissioning and Operator Training (optional) - Day 1 (up to 8 hours) – Machine installation and training on the control system. Godperp Dcrjfx Adxstt Expert Telephone Consultation (optional) - By phone: 7:30 AM – 9:00 PM (Mon-Sat) – 8-hour package, to be used within 12 months. - Online: 7:30 AM – 2:30 PM (Mon-Fri) – 8-hour package, to be used within 12 months. Access to Otinus Academy online courses (optional) - MyPlasm – 12-month access - LibreCad – 12-month access

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: Special offer applies only to customers who participated in a demonstration before purchase – in the Otinus machine showroom in Bydgoszcz. Fiber Laser Cutting Machine “FLV-3015-C2 3kW / VF1530-3000W” Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - X and Y axis repeatability: ±0.03 mm - Maximum speed: 120,000 mm/min - Maximum acceleration: 1.5 G - Power output: 3.0 kW - Source brand: Raycus or “MAX Photonics” (selectable) - Power supply: ~3×400 V, 50 Hz - Protection class: IP54 Cutting Thickness - Mild steel: recommended thickness – 20 mm, maximum thickness – 22 mm - Stainless steel: recommended thickness – 8 mm, maximum thickness – 10 mm - Aluminium: recommended thickness – 6 mm, maximum thickness – 8 mm - Brass: recommended thickness – 5 mm, maximum thickness – 6 mm Construction Gtedpfsh Hfgyjx Adxst The machine features exceptional stability thanks to its welded structure on robust legs. High traverse speeds and precision are ensured by Japanese Fuji servo drives, working on heavy-duty linear guides, racks, and helical gears. The ABLS system automatically replenishes lubricant in the axis guides. RayTools cutting head with autofocus Control Panel The fiber laser cutting system is operated via a control panel consisting of a monitor, mouse, and keyboard for user convenience. The integrated computer is equipped with Windows 10 and CypCut software, offering the following functions: - Drawing creation - File import/export - Performance and cutting speed optimization All installed software comes with lifetime licenses. Wireless Controller The laser head is controlled using a wireless controller. Safety The fiber laser cutting machine is equipped with all essential safety features and accessories for operator protection. Additional safety is provided by an emergency warning light with acoustic signal, which activates in hazardous situations to alert the operator. Free Drawing Package Each Otinus laser cutting machine comes with a comprehensive CAD drawing package. The included designs are ready to use and can be cut in any chosen format. Our technician will demonstrate how to use them during training. Technical Consultation Our specialists will help you select the appropriate machine and accessories prior to purchase – on the basis of technical drawings of your required parts. Included in the machine price 2-day commissioning and operator training - Day 1 (up to 8 hours): commissioning and control instructions. - Day 2 (up to 8 hours): independent operation under supervision of our technician – including the option to program customer-specific components. Professional Consultation - By phone: 7:30–21:00 (Mon–Sat) – 8-hour package, valid for 12 months. - Online: 7:30–14:30 (Mon–Fri) – 8-hour package, valid for 12 months. Access to online learning courses - LibreCAD – 12 months’ access Additionally included - CAD drawing package

Stanje: novo, Leto izdelave: 2024, Fiber Laser Cutting System FLV-3015-C2 6kW / VF1530-6000W Technical Specifications - Maximum sheet dimensions: 3000 x 1500 mm - X- and Y-axis positioning accuracy: ±0.05 mm/m - Repeatable positioning accuracy (X/Y): ±0.03 mm - Maximum speed: 120,000 mm/min - Maximum acceleration: 1.5G - Power output: 6.0 kW - Power requirement: 40.0 kW - Source brand: Choice of Raycus or MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting Depth - Steel S235: recommended 25.0 mm, maximum 30.0 mm - Stainless steel: recommended 16.0 mm, maximum 20.0 mm - Aluminium: recommended 12.0 mm, maximum 14.0 mm Construction The machine features a highly stable welded frame. High-speed, high-precision head movement is achieved using Japanese Fuji servo drives. Godpfjh Hfphox Adxett Automatic lubrication system for axis guides. User-Friendly Operation Loading heavy sheets is made easier by integrated transport balls in the table surface, ensuring smooth sliding during loading. Small finished parts are also easy to retrieve thanks to trolleys located below the machine, which can be conveniently pulled out by a practical handle. RayTools cutting head with autofocus Otinus Protect (optional*) This product provides dedicated protection for your laser source. With this service, you ensure uninterrupted operation in your business. We safeguard your production so that you can complete your orders on time. Voltage stabilizer (optional*) Control Panel The computer operates on Windows 10 and uses CypCut software for editing, offering functions such as design, file import and export, work optimization. All installed software includes lifetime licenses. The machine is equipped with a wireless controller. Professional Support We maintain ongoing contact with our customers. With every machine purchase, you receive a technician hour package for professional support from Otinus engineers. Otinus Academy Training Software With this machine purchase, you receive one-year access to online courses – ideal for onboarding new staff or refreshing training knowledge. Scope of delivery includes 2-day operator training and machine installation - Day 1 (up to 8 hours) – Commissioning and control system training - Day 2 (up to 8 hours) – independent operation under the supervision of our technician, including programming of specific parts. Consultation by our specialists - By phone: 7:30 to 21:00 (Mon-Sat) – 8-hour package to be used within 12 months. - Online: 7:30 to 14:30 (Mon-Fri) – 8-hour package to be used within 12 months. Access to Otinus Academy online courses - LibreCad – access for 12 months Additionally you receive - CAD drawing package