Die-Cast nakup rabljenega (19.576)

Stanje: dober (rabljeno), Leto izdelave: 2020, Mașină de turnătorie pentru aluminiu, IDRA 320PRP Recondiționată de Ontogepszerviz în anul 2020 Gbjdpfx Aswpr Ufeh Dsu În stare bună de funcționare DISPONIBILĂ PENTRU VÂNZARE ÎNCEPÂND CU 1 SEPTEMBRIE 2025 CONDIȚII DE VÂNZARE: EXW – DEMONTAREA ȘI TRANSPORTUL NU SUNT INCLUSE ÎN PREȚUL DE VÂNZARE

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Na voljo je hladnokomorna tlačna livarska naprava Urpemak za aluminij. Zapiralna sila: 50t, širina plošč: 500mm, razmik stebrov: 500mm, teža injiciranja: 50cm³, izmetna sila: 6400kg, priključna moč: 11kW, teža: ca. 4900kg. Ogled na lokaciji je možen. Gsdpfjw R Dgzex Ah Dobu

Stanje: rabljeno, Leto izdelave: 2017, Heating capacity: 2 x 12 kW Cooling capacity: 2 x 35 kW Gsdpfx Aov U Dl Ish Debu Used heating and cooling unit from Robamat, designed for use with die casting machines. This dual-circuit unit is configured for temperature control of a die casting mold using water. The unit has been inspected, serviced, and repaired by the manufacturer's authorized service partner. Available from stock Number of circuits: 2 Operating temperature: up to max. 160°C Heating capacity: 2 x 12 kW Cooling capacity: 2 x 35 kW Voltage: 3 x 400V / 50Hz Mold cycle pause RS485 interface Pump protection filter housing (new)

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: omejena funkcionalnost, Used Oskar Frech DAW 125 with control cabinet and crucible Gbedpfx Aswywn Ejh Dou

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, FRECH DAK 580-62 DRC-Druckgießmaschine, gebraucht Maschinennummer 430302, Schließkraft 5.800 kN, Öffnungskraft 155 kN, Gsdpfxewc Tn Tj Ah Debu maximaler Öffnungshub 680 mm, Kniehebel (Werkzeugverschluss), Druckkammer-Ausführung: Kaltkammer, Einspritzkraft 589 kN, Füllkolbendurchmesser 60 bis 110 mm, Füllvolumen der Druckkammer 1.101 bis 3.700 cm³, spezifischer Gießdruck 642 bis 2.155 bar, größte Schussmenge ca. 274 bis 920 cm³, Aufspannplatten 1.120 x 1.120 mm, lichte Weite zwischen den Säulen 700 x 700 mm, Werkzeughöhe max. 800 mm, min. 350 mm, Werkzeugaufspannfläche 446 x 446 mm, 4 Säulen, Säulenquerschnitt 140 mm², Softwareversion SBS 20.10 VISUALIS 17.10. Inklusive Dosierofen MELTEC AVDF 1200/5000, Baujahr 2016, Seriennummer 3376/16, Handlingsroboter ABB, Sprüheinheit, Temperiergerät REGLOPLAST 300DG/12/FM30/1K/RT45, Seriennummer 371412, ohne Baujahr. Technische Daten: Abmessungen (L x B x H): ca. 8.000 x 5.500 x 3.500 mm Gewicht: ca. 36.000 kg Baujahr: 2000

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C1403, Mașină de turnătorie pentru aluminiu, IDRA 280 TONS REFĂCUTĂ DE TECNOPRESSE ÎN 2017 Gjdpfxjwpr N Ae Ah Dsbu În stare bună de funcționare DISPONIBILĂ PENTRU VÂNZARE ÎNCEPÂND CU 1 SEPTEMBRIE 2025 CONDIȚIA DE VÂNZARE ESTE EXW – DEMONTAREA ȘI TRANSPORTUL NU SUNT INCLUSE ÎN PREȚUL DE VÂNZARE

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1982, Clamping force: 300 t, platen size X/Y: 880 mm / 880 mm, piston stroke: 400 mm, column diameter: 100 mm, ejector force: 18 t. Height adjustment: 200 mm, space between columns X/Y: 555 mm / 555 mm, mould height min./max.: 200 mm / 650 mm, max. mould opening stroke: 540 mm, max. casting weight: 5.2 kg. Dimensions X/Y/Z: approx. 6150 mm / 1950 mm / 2615 mm, weight: approx. 16,000 kg. This machine is intended for spare parts. Control system, electrical components and paintwork must be renewed. Inspection on site is possible. Gjdpfxott Dybe Ah Dsbu

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, FRECH DAK 720-71 RC Druckgießmaschine, gebraucht Maschinennummer 440403, Schließkraft 8.000 kN, Schließweg 825 mm, Auswerferkraft 364 kN, Auswerferhub 180 mm, Werkzeughöhe 350 bis 1.000 mm, Aufspannplatten 1.300 x 1.300 mm, Säulenabstand 825 mm, Säulendurchmesser 180 mm, Einspritzkraft max. 713 kN, Einspritzhub 600 mm, Gießkolbendurchmesser 70 bis 120 mm, Gießvolumen 1.539 bis 4.523 cm³, Betriebsdruck 160 bar, Antriebsmotor 45 kW, mit Dosierofen MELTEC AVDF 1200/5000, Baujahr 2017, Seriennummer 3469/17, 30 kW, Handhabungsroboter ABB, Baujahr 2007, mit Steuerungssystem, Sprühkopf, Stromversorgungseinheit im Schaltschrank fehlt, Pumpe defekt, als Ersatzteilträger Gsdpfxowc Tdzo Ah Dsbu Technische Daten Abmessungen (L x B x H) ca. 8.000 x 7.500 x 3.500 mm Gewicht ca. 36.000 kg Baujahr 2001

Stanje: rabljeno, Leto izdelave: 1998, Maximum workpiece weight: 2000 g Used scale for use with die casting machines for workpieces up to 2000 g. The device has been inspected and overhauled by the manufacturer. Load cell and control board replaced. Gbsdpowx R Uisfx Ah Dsu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Gedpfeucfwpjx Ah Djbu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 32577, Avtomatiziran stroj za tlačno litje pod visokim tlakom Bühler. Sila zapiranja: 7900 kN. Hod bata: 500 mm. Gbodpfjfbl E Sex Ah Dju Klimatska naprava: KMA / Bentleon tip Ultravent / AFS 6000 (2000). Stroj je DEMONTIRAN. Nedavno ponovno prebarvan.

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Gsdpfx Ahefrvzvj Dsbu Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 10262342, Avtomatiziran stroj za tlačno litje pod visokim tlakom Bühler. Zapiralna sila 9.800 kN. Gedpfefbl Enex Ah Debu Stroj je razstavljen.

Stanje: rabljeno, Leto izdelave: 2000, Used oven cabinet for die casting machine, manufacturer Frech, type DAW 80 – suitable for multi-chamber furnace, manufacturer MELTEC, type 80/180, equipped with individual controllers. Function tested by the manufacturer. Gbodpshwt Rbsfx Ah Dsu

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, razmak između stupova: 579 mm, ulivna sila: 350 N, hod: 420 mm, premer stebra: 125 mm, skupna masa: 12.000 kg, moč: 22 kW (29,91 KM), Zapiralna sila: 350 metričnih ton Premer veznih stebrov: 125 mm Razmak med veznimi stebri: 579 x 579 mm Debelina orodja (min – maks): 300 – 700 mm Hod orodja: 420 mm Velikost pomične plošče: 940 x 940 mm Položaj vbrizgavanja: -125 mm Gsdov D Dwpepfx Ah Dobu Potreba po moči: 22 kW Teža stroja: 11.974 kg (26.400 funtov) Prodaja se skupaj z obrezovalno stiskalnico in manipulatorjem.

Stanje: rabljeno, Leto izdelave: 1995, Clamping force: 2200 kN Clamping platen: 755 x 755 mm Tie bar distance: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Gbjdpfxsvxlufj Ah Dju Mould height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1078 cm² Ejector stroke (decompression): 230 mm Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon request. Manufacturer recommends a general overhaul at their overhaul facility. The scope of overhaul can be arranged as required.

Stanje: rabljeno, Leto izdelave: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Tie bar distance: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mold height: 120-350 mm Gsdpfx Astuxmyjh Debu Tie bar diameter: 56 mm Die casting force: 55 kN Die casting stroke: 130 mm Plunger diameter: 45, 50, 55 mm Casting volume (DIN 24480): 76, 121, 165 cm² Specific casting pressure: 345, 280, 231 kp/cm² Associated parting surface: 174, 214, 260 cm² Recoil stroke: 150 mm Used machine DAW 50 as the basis for a general overhaul, excluding control cabinet, melting furnace and furnace cabinet. A full overhaul can be optionally performed at the manufacturer’s refurbishment facility. The scope of this overhaul can be defined upon request.

Stanje: rabljeno, Leto izdelave: 2007, used electric sprayer Spraymotion 411 E for use on die casting machines. The device is function-tested by the manufacturer. Gbodpstwfknefx Ah Dju Includes spray and blow bar (SR system with adjustable nozzles) and stand Connection: 24-pin plug Traverse module: 400 mm stroke

Stanje: novo, Leto izdelave: 2018, Crucible capacity: 420 kg As-new and unused industrial furnace for DAW20A or DAW20S. The furnace from Metec, model Z20/120C, features a durable stainless steel crucible. Crucible capacity is 420 kg, melting capacity per hour is 120 kg/h at a connected load of 21.5 kW. Gbsdotv Rlzopfx Ah Dju A suitable control cabinet can be custom-built upon request.

Stanje: novo, Leto izdelave: 2024, Clamping force: 2,200 kN Clamping plate: 755 x 755 mm Tie bar spacing: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mold height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific casting pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1,078 cm² Return stroke: 230 mm Machine equipment: 1.1.1 Motorized safety door on casting side right 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector assistance packages 2.1.2 Core pull device M2 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of the clamping unit 3.0.1 Casting assistance packages 3.0.1.2 Casting assistance package Technology 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified plunger removal 3.5.2 Electric nozzle and casting container heating 3.5.3 Pluggable connections for electric nozzle and casting container heating 4.3.1 Additional heat exchanger 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.4 Integrated water circuit control 2+8 circuits 5.1.1 Machine control DATADIALOG – Shot Stop 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for part removal 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum device 6.1.7 Frech interface for doorman function 6.5.2 RSD equipment package with switch 7.2.3.3 Spraymotion 811 E with servo drive 7.2.10 Extended spray program Gbedpfxsvvx Hcs Ah Dju 7.3.1 Release agent tank TD 20 7.4.0.6 Spray bar CR 458

Stanje: rabljeno, Leto izdelave: 2000, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar distance: 350 x 350 mm Machine weight: approx. 5.5 t Clamping stroke: 280 mm Ejector force: 60 kN Gedpfx Ajvfhryeh Djbu Ejector stroke: 70 mm Mold height: 160–400 mm Tie bar diameter: 65 mm Injection force: 75 kN Injection stroke: 130 mm Injection plunger diameter: 50, 55, 60 mm Injection volume (DIN 24480): 119, 163, 214 cm³ Specific injection pressure: 380, 315, 265 kp/cm² Associated parting surface: 236, 285, 340 cm² Platen opening stroke: 150 mm Completely overhauled DAW 80 GO die casting machine with DataLogic control system for the processing of zinc alloys. Available upon agreement.

Stanje: rabljeno, Leto izdelave: 1999, Clamping force: 3150 kN Gbjdpfxsvfhrts Ah Dou Mounting platen: 900x900 mm Tie-bar distance: 550x550 mm Machine weight: approx. 15.5 t Clamping stroke: 500 mm Ejector force: 159 kN Ejector stroke: 120 mm Mold height: 300–700 mm Tie-bar diameter: 110 mm Injection force: 158 kN Injection stroke: 250 mm Injection plunger diameter: 70, 80, 90, 100 mm Casting volume (DIN 24480): 514, 791, 1105, 1455 cm³ Specific injection pressure: 410, 316, 249, 201 kp/cm² Corresponding parting surface: 768, 996, 1265, 1597 cm² Eject stroke: 300 mm Used die casting machine DAM 315 S with Datacontrol control system, suitable for magnesium alloy processing. Available from used machinery stock. The machine is equipped with a Rauch electric furnace, type MMO 315E. Spray device not included. Manufacturer’s recommendation: repair or overhaul at the refurbishment facility. Scope of work can be agreed upon as required.

Stanje: novo, Leto izdelave: 2024, Clamping force: 600 kN Clamping plate: 460x460 mm Tie bar distance: 300x300 mm Clamping stroke: 230 mm Ejector stroke: 70 mm Ejector force: 40 kN Mould height: 120–350 mm Tie bar diameter: 56 mm Casting force: 54 kN Casting stroke: 130 mm Casting piston diameter: 45, 50, 55 mm Casting volume (DIN 24480): 109, 150, 194 cm³ Specific casting pressure: 339, 274, 226 daN/cm² Associated parting surface: 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment 1.0.1 Clamping unit cover on base frame 1.0.2 Clamping unit cover on base frame for scale / chute 1.1.0 Powered safety door, casting side left 1.4.0 Machine mounts 1.5.4 Internal machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector benefit package 2.4.2 Ejector plate safety, mould side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic clamping unit adjustment 3.1.1 Nitrogen pressure monitoring for piston accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling casting system 3.4.5 Simplified casting piston removal 3.4.6 Casting piston stop on return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Equipment package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Measurement data acquisition Scope 5.4.2 Programmable inputs and outputs Gsdjiu Smbspfx Ah Dobu 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating/cooling circuits 6.3.1.1 Control unit with visualization on support arm 6.5.2 Equipment package RSD with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Sound-insulated reject chute OF7070 Years FRECH – Anniversary package

Stanje: novo, Leto izdelave: 2024, Clamping force: 240 kN Clamping plate: 380 x 380 mm Distance between tie bars: 250 x 250 mm Machine weight: approx. 3.0 t Clamping stroke: 180 mm Ejector force: 28 kN Ejector stroke: 50 mm Mould height: 120–300 mm Tie bar diameter: 45 mm Injection force: 43 kN Injection stroke: 85 mm Injection plunger diameter: 36, 40, 45 mm Injection volume (DIN 24480): 47, 63, 87 cm³ Specific injection pressure: 420, 340, 270 daN/cm² Corresponding parting surface: 56, 70, 88 cm² Die opening stroke: 150 mm Machine equipment 1.0.2 Cover for clamping unit on machine base for scale/chute 1.1.0 Motorized safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency Gjdpfx Asr Hwfxjh Dsbu 2.0.1 Advantage package ejector 2.6.4 Machine assistance system SensiLock® 3.0.1 Advantage package casting assistance 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified casting plunger removal 3.4.6 Casting plunger stop on return stroke 3.5.2 Electric nozzle and casting container heating 3.5.3 Plug-in connectors for electric nozzle/casting container heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG RC 5.1.5 Advantage package maintenance 5.6.0 Special cable lengths 6.1.3.1 Digital interface for external extraction device 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum device 6.3.1.1 Operator unit with visualization on support arm 6.5.2 Equipment package RSD with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent tank TD 20 7.4.0.1 Spray bar CR 155 7.12.3 Sound-insulated parts chute

Stanje: novo, Leto izdelave: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar distance: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mold height: 160–400 mm Tie bar diameter: 65 mm Injection force: 78 kN Injection stroke: 130 mm Injection piston diameter: 50, 55, 60 mm Injection volume (DIN 24480): 147, 191, 241 cm³ Specific injection pressure: 396, 327, 275 bar Corresponding parting plane: 226, 274, 326 cm² Ejection stroke: 220 mm Machine Features: 1.0.2 Clamping unit cover on base frame for scale / chute 1.1.0 Motorized safety door on injection side (left) 1.4.0 Machine mounts 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector advantage package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1 Injection assistance advantage package 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill injection system 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop in return stroke 3.5.2 Electric nozzle and shot chamber heating 3.5.3 Plug-in connectors for electric nozzle and shot chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control 2+6 circuits 5.1.0 DATADIALOG–RC machine control 5.1.5 Maintenance advantage package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operating unit with visualization on swing arm 6.5.2 RSD equipment package with switch Gsdor Hwf Aopfx Ah Dobu 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent container TD 20 7.4.0.3 Spray rail CR 275