Delavnica Žerjav nakup rabljenega (1.934)

Stanje: dober (rabljeno), prevoženi kilometri: 63.010 km, barva: oranžna, dvižna višina: 51.000 mm, Leto izdelave: 2015, obratovalne ure: 13.452 h, Pogonski sklop Pogon: Kolesa Znamka motorja: Daimler AG Teže Gedpfox R Ryvjx Adxett Lastna teža: 48.000 kg Funkcionalno Dolžina droga: 5.100 cm Dvižna zmogljivost: 75.000 kg CE označba: da Stanje Tehnično stanje: dobro Vizualno stanje: dobro Identifikacija Serijska številka: 40803109 / W09080430FWG12105 Dodatne informacije Raven emisij: Stage IIIB / Tier IV interim Dobavni pogoji: EXW Prevozne dimenzije (D x Š x V): 10,4x2,55x4,05 Država proizvodnje: DE Za več informacij se obrnite na Jeroen Heindryckx, Bart Apers ali Matthias Eyckmans.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Nakladalna dvigalka / Dvigalo Copma 0.4 z iztegljivim krakom Letnik: 2005 4x hidravlično izvlečno + 3x hidravlično izvlečno 4100 kg pri 4,54 m 2020 kg pri 8,4 m Gtsdpfx Adox U Atioxet 1270 kg pri 12,4 m 610 kg pri 15,3 m 300 kg pri 20,65 m Daljinsko upravljanje Nadzor dviga Rotacijske podporne noge .... Cevoman bv. Lenskensdijk 5 2200 Herentals Belgija

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 101.066 km, moč: 370 kW (503,06 KM), vrsta goriva: dizel, barva: bela, tip droga: teleskopski, Leto izdelave: 2009, obratovalne ure: 6.449 h, General Information Year of manufacture: 2009 Model year: 2009 Drivetrain Drive: Wheel Functional Mast: Telescopic (6 sections) Mast length: 58 m Main boom length: 58 m Lifting capacity: 95,000 kg Body brand: LIEBHERR LTM 1095 5.1 CE marking: yes Condition Technical condition: very good Optical condition: very good Gedsvrtzaepfx Adxjtt

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, WORKSHOP PRESSURE WASHER MP150 Features: Gtodjvugwmepfx Adxot Washing is performed in a closed circuit using a cleaning liquid. The detergent is dispensed from the gun nozzle at pressures up to 8 bar, which enables thorough cleaning of hard-to-reach areas and heavily soiled parts contaminated with carbon deposits, grease, or oils. The washer is ideally suited for turbocharger refurbishment and for cleaning heavily soiled components made of steel, cast iron, aluminium, and other alloys. The washer lid is equipped with pneumatic actuators, enhancing safety and work quality. The cabin is standardly equipped with work area lighting. The washer features a dual-function gun capable of dispensing either air only or air mixed with the cleaning agent. The cleaned item can be dried with compressed air. * Please note: the washer is supplied for self-assembly. Technical data Capacity: 160L Detergent tank capacity: 8-14 L Operating pressure: 5-8 bar Weight: 29 kg Air regulation Pneumatic spray gun Illuminated cabin Work ventilation Dimensions: 770x610x700mm

Stanje: rabljeno, skupna dolžina: 2.785 mm, Leto izdelave: 2021, nosilnost: 3.200 kg, - Največja nosilnost 3200 kg - Prednji pogon: št. 2 elektromotorja AC 3 kW 48V. Razred izolacije H - Odstranljive protiuteži: 700 kg - Baterija: 48 V - 500 Ah, 8 delovnih ur - Spredaj: 2x superelastične pnevmatike 200/50-10” - Zadaj: 2x superelastične pnevmatike 16x6-8” - Krmiljenje: preko zadnje osi, kot zasuka 90°/90° - Elektronska omejitev obremenitve - Samodejni zavorni sistem na vseh kolesih Gtedpfx Aex Edxfsdxot - Izdelan iz predizdelanih in zvarjenih jeklenih plošč - Kot iztega +60°/-15° - Elektromotor 9 kW - 48 V AC, razred izolacije 6 - DALJINSKI UPRAVLJALNIK ZA VSE GIBE ŽERJAVA IN IZTEGA; ČE OBSTAJA, TUDI ZA GIBE HIDRAVLIČNIH PRIKLJUČKOV - POGON SPREDNJE OSI S PROTISMERNO GIBANJE - PROPORCIONALNO IZTEGLJIV HIDRAVLIČNI IZTEG

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, številka stroja/vozila: 0169, Največji mobilni žerjav na trgu se je odlično izkazal na našem zadnjem gradbišču. Gradnja je sedaj zaključena, zato je žerjav na voljo po ugodni ceni. Model: Movilift 400, proizvajalec: Zebak GmbH + Co. KG, letnik: 2001. Žerjav je popolnoma funkcionalen. Gtjdpfxox Srkrj Adxot

Stanje: dober (rabljeno), prevoženi kilometri: 82.000 km, barva: oranžna, dvižna višina: 72.000 mm, Leto izdelave: 2014, obratovalne ure: 4.882 h, Pogonski sklop Pogonska os: kolesa Znamka motorja: Mercedes Teže Lastna teža: 48.000 kg Gedpfx Ajxuz Hredxjtt Funkcionalno Dolžina nosilnega droga: 4.400 cm Dolžina zgornje roke: 16 m Dvižna kapaciteta: 70 kg CE oznaka: da Stanje Tehnično stanje: dobro Vizualno stanje: dobro Identifikacija Serijska številka: WFN4RUFT4E2131147 Dodatne informacije Emisijski standard: Stage IIIA / Tier IV interim Dobavni pogoji: EXW Transportne mere (D x Š x V): 12,4x2,55x3,78 Država proizvodnje: DE Dodatne informacije Za več informacij se obrnite na Jeroen Heindryckx, Bart Apers ali Matthias Eyckmans.

Stanje: novo, Rotacijska stiskalnica za osi 2 T iz kategorije delavničnih stiskalnic in skupine ročnih delavničnih stiskalnic proizvajalca KNUTH je idealno orodje za vtiskovanje in iztiskovanje osi, puš, vreten in zatičev. Zaradi kompaktne zasnove in robustne izvedbe iz težke sive litine je nepogrešljiva tako v strojnih delavnicah kot v servisih. Ta stiskalnica zagotavlja pritisno silo do 10 kN in ima izhodni razpon 145 mm, kar omogoča zelo vsestransko uporabo — bodisi za ravnanje, upogibanje ali delo z razčlenjevalnimi vretenastimi orodji. Dobava je brez podstavka, vsebuje pa navodila za uporabo za lažje rokovanje. Vložite v kakovost in zmogljivost z rotacijsko stiskalnico za osi 2 T. Naročite zdaj in razširite svojo delavnico s to zmogljivo ročno delavniško stiskalnico! Gedeu E I E Rjpfx Adxstt

Stanje: zelo dobro (rabljeno), vrsta goriva: dizel, barva: modra, dvižna višina: 64.000 mm, tip droga: teleskopski, Leto izdelave: 2008, obratovalne ure: 6.034 h, General Information Year of manufacture: 2008 Intended use: Construction Technical Information Number of cylinders: 6 Drive: Wheeled Unladen weight: 48,485 kg Functional Mast: Telescopic (5 sections) Mast length: 64 m Lifting capacity: 70,000 kg Superstructure brand: TADANO GR-700E-1-00211 ROUGH TERRAIN CRANE CE marking: yes Condition Technical condition: very good Visual condition: very good Gjdpfxswudgqo Adxstt Financial Information Price: On request

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Gantry Crane Specification: A gantry crane with a lifting capacity of up to 1 tonne is a versatile piece of equipment suitable for a variety of tasks, including unloading, loading, repairs, warehouse operations, assembly work, and many more applications. It is an extremely useful tool for halls, workshops, and warehouses where efficient lifting and transporting of heavy items are required. The device is specifically designed for operation on horizontal, flat floors, enabling smooth movement along straight lines. Thanks to its four swivel castors, the crane allows for easy manoeuvring within the workspace, while parking brakes ensure secure positioning at designated spots. Height adjustment while unloaded is straightforward and safe due to a lever and two locking screws on each support. Additionally, the stability and durability of the crane are ensured by its robust design and extra cross-braces which provide torsional rigidity. An additional advantage of the 1-tonne gantry crane is the option to fit a manual trolley, which allows for even greater flexibility and freedom of movement along rails or guides. Key advantages of the gantry crane: - Designed for loading and unloading, assembly, repairs, or warehouse work in workshops and production facilities with level, smooth floors - Easy mobility and assembly using four swivel castors with parking brakes - Simple and safe height adjustment (unloaded) with a lever and two locking screws per support - Stable, robust, and torsion-resistant construction due to additional cross-bracing - Option to mount a manually powered trolley Technical parameters: - Capacity: 1000 kg - Height: 2500 mm – 3600 mm - Width: 2300 mm - Double T-beam: 76 x 140 mm - Overall width (base): 2400 mm - Top beam width: 2550 mm - Overall height: 2520 mm / 3720 mm - Working width for hoist: 1750 mm - Frame tensioners: 4 pcs - Cross braces on beam: 2 pcs - Weight: 142 kg The crane can be equipped with wire rope or chain hoists by means of a block or manual trolley. Crane is supplied without the hoist pictured. Gjdjridgrepfx Adxett

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 32.000 kg, gorivo: dizel, zavore: VEB (Kombinat državnih podjetij), voznikova kabina: spalna kabina, emisijski razred: Euro 6, Leto izdelave: 2025, ZDS 5 Dvosmerno vozilo za gradnjo in vzdrževanje železniških in tramvajskih kontaktnih omrežij. Oprema: - merilni pantograf - 2 hidravlična korektorja kontaktne mreže - teleskopska delovna platforma za 5 oseb, kot vrtenja 360° - HDS dvigalo z možnostjo namestitve košare za 2 upravljavca - generator napajan iz rezervoarja vozila, moč 3,6kV z izhodi 1 x 400V in 2 x 230V - električni, daljinsko upravljan avtomobilski vitel, vlečna sila po dogovoru - hidrostatični pogon za vožnjo po tirnicah. Gtsdpfx Aew N Ncfsdxet

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2021, portalna dvigalka 2x35 ton, razpon 25 ali 28 metrov Gjdpfxeggggps Adxott

Stanje: rabljeno, Maximum load: 750 kg Godslf Iy Nspfx Adxjtt

Stanje: rabljeno, Leto izdelave: 2025, Pogon: kolesa Lastna teža: 72.000 kg Dvižna zmogljivost: 300.000 kg Serijska številka: 63006188 Stanje sprednjih pnevmatik: 0 Stanje zadnjih pnevmatik: 0 Transportne dimenzije (D x Š x V): 17,09 x 2,99 x 3,99 m Za več informacij se obrnite na skupino PFEIFER. Gtedpfx Aox Ravgodxet

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: hibrid, barva: rdeča, skupna masa: 2.850 kg, obratovalna teža: 2.850 kg, dvižna moč: 3.000 kg/m, Leto izdelave: 2023, Hoeflon Mini Crana C6 Rok výroby: 2023 Hybrid PDI (doručovací kontrola) od Hoeflon Nizozemsko Nosnost: 3 000 kg Gtedex Tzigspfx Adxot Max. pracovní rádius: 13,70 m x 210 kg Max. výška zdvihu: 11,5 m, vč. volitelně až 16,40 m Rozměry (D x Š x V): 2,98 m x 0,77 m x 1,88 m Vč. navijáku a ramene: 3,20 m x 0,77 m x 2,00 m Celková hmotnost: 2 850 kg Systém stožáru: válec a řetězový systém Úhel výložníku: -5° až 83° Otoč: 360° Pohybová rychlost: 2,2 km/h Motor: YANMAR 3-válcový, 7,3 kW (diesel), 1 500 ot./min Elektrický pohon: 230 V Startovací systém: elektrický start přes dálkové ovládání Palivo / objem nádrže: diesel / 20 litrů Max. stoupání: 15° Povrchový tlak: 0,79 kg/cm² Zahrnuté speciální volby: Fly-jib prodloužení, nastavitelné na 30° Sklopné podpěry Naviják: 3 000 kg Máte-li zájem o kompaktní jeřáb Hoeflon C6, kontaktujte nás a rádi Vám poskytneme další informace.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, A workshop parts washer is a versatile tool that should be present in every service shop, garage, or workshop. This indispensable equipment ensures fast and cost-effective removal of dirt and grime. A major advantage is the ability to use the washer indoors. A cabin parts washer guarantees effective removal of all contaminants—from oils to hard-to-reach deposits—while ensuring the safety and long-term performance of your components. The applied technology not only ensures cleanliness but also provides protection against corrosion. Please note that cleaning results will depend on the type of detergents used. The parts washer is designed to use up to 90 litres of cleaning agent, with a maximum tank capacity of 140 litres. For maximum efficiency, the pump inlet should be covered during operation. The pump operates within a flow rate range of 2.7 to 3.6 litres per minute, providing thorough cleaning of surfaces, including fine cracks, with a powerful jet. The cleaning fluid is drawn from the bottom of the tank in a closed circuit and delivered under pressure through a flexible hose. The workshop washer is equipped with four legs for stable operation and an optimised working height. The lid locks automatically when opened. Additionally, the unit features a work surface below the basin level, useful for placing cleaning accessories or washed parts to let them dry. The unit requires self-assembly. Technical specifications: Tank capacity: 140 L Max. cleaning fluid volume: 90 L Max. pump capacity: 2.7–3.6 L/min Power supply: 230 V Dimensions: 1130x540x885 mm Tray dimensions: 800x500 mm Weight: 43 kg Power supply: 230 V Gtjdporh Ey Rsfx Adxot Self-assembly required. Price shown is NET, exclusive of transport costs. For more information, please contact us by phone or email. Feel free to visit our website to explore our full offer.

Stanje: dober (rabljeno), prevoženi kilometri: 118.000 km, vrsta goriva: dizel, barva: modra, tip droga: teleskopski, Leto izdelave: 2013, obratovalne ure: 13.800 h, Details - Hersteller: Grove - Typ: GMK 4080-1 Mobilkran - Fahrgestellnummer: W09080430DWG12042 - Baujahr: 2013 Spezifikationen - Motor: Mercedes-Benz - Kilometerstand: ca. 118.000 km - Unterwagenbetriebsstunden: ca. 4.100 h - Oberwagenbetriebsstunden: ca. 13.800 h - Max. Tragfähigkeit: 80.000 kg - Max. Betriebsdruck: 300 bar - Hauptausleger / 5-teilig: 51 m - Hydraulischer Klappausleger: 21 m - Antrieb: 8 x 8 x 8 - Bereifung: 445-95 R 25 - Eigengewicht: 48.000 kg Zubehör: - 1x 1-Strang-Haken - 1x 3-Strang-Haken = Weitere Informationen = Gtodpox Tp Svjfx Adxst Allgemeine Informationen Baujahr: 2013 Gewichte Leergewicht: 48.000 kg Funktionell Mastlänge: 51 m Hubkapazität: 80.000 kg Aufbaumarke: Grove GMK CE-Kennzeichnung: ja Zustand Technischer Zustand: gut Optischer Zustand: gut Finanzielle Informationen Preis: Auf Anfrage Weitere Informationen Bitte wenden Sie sich an Stefan Schaapveld für weitere Informationen.

Stanje: rabljeno, Leto izdelave: 2003, Gantry crane 2x12.5 tons, 28-meter span Gtjdjf Dzqyepfx Adxst Drive and hoisting units by Demag Frequency-controlled crane travel.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, Spierings SK597-AT4 Dvižna zmogljivost: 7.000 kg Leto izdelave: 2018 Gtsdpfxox Rq Els Adxjt Tehnične podrobnosti Naprodaj rabljen mobilni stolpni žerjav Spierings SK597-AT4 Dvižna zmogljivost: 7.000 kg Leto izdelave: 2018 Prevoženi kilometri: ca. 29.800 km Obratovalne ure: ca. 3.665 h zgoraj | ca. 2.150 h spodaj Dolžina ramena: 48 metrov Višina kavlja: 58,3 m pri 45° Maks. na koncu ramena: 1.700 kg Za več informacij in ponudbo nas kontaktirajte PCM Krane & Logistik GmbH | Berlin | Nemčija

Stanje: novo, La presse à mandrin 1 T de la catégorie presses d'atelier et du groupe de produits presses d'atelier manuelles de KNUTH est l’outil idéal pour le montage et le démontage de mandrins, bagues, broches et axes. Grâce à sa conception compacte et à sa structure robuste en fonte grise lourde, elle est indispensable aussi bien dans les ateliers mécaniques que dans les entreprises de réparation. Cette presse offre une force de pression allant jusqu'à 5 kN et une profondeur de col de 100 mm, ce qui la rend extrêmement polyvalente, que ce soit pour le redressage, le cintrage ou le travail avec des outils à mortaiser. La livraison s’effectue sans bâti et comprend un manuel d’utilisation pratique. Fiabilité et efficacité sont assurées par une manipulation simple et des normes de sécurité élevées. Commandez dès maintenant la presse à mandrin 1 T et optimisez votre atelier avec cet outil performant. Gtjdpfeu E I Ewsx Adxet

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, skupna masa: 1.000 kg, nosilnost: 1.000 kg, 360° mostovno dvigalo 1 tona Mostovno dvigalo s vitlom, mostovno dvigalo Gsdjx Tqufopfx Adxett

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Product Description: Cormak 2-ton gantry crane is a specialized industrial machine designed for moving heavy loads within factory halls. The crane consists of several components, including a load-bearing frame, a trolley, and additional parts that facilitate easy, safe, and precise horizontal movement of loads, as well as their lifting and lowering with hooks. This model stands out primarily due to its durability and stable construction, enabling use under heavy industrial conditions. The crane is also torsion-resistant, thanks to additional reinforcements applied in its structure. One of the key features of the crane is its four return rollers, which ensure effortless movement of heavy loads. These rollers are highly wear-resistant and robust, guaranteeing a long service life. Another important element is the integrated parking brakes that ensure safe stopping of the crane at any position. The height adjustment is straightforward and safe when the crane is unloaded, using two locking screws per support. The structure of the crane is robust and stable, and its user-friendly operation makes it an ideal solution for companies needing an efficient and reliable machine for moving heavy loads. Furthermore, a variety of optional accessories enables the crane to be adapted for an even wider range of applications in diverse industrial sectors. Thanks to its efficiency and precision, the gantry crane is a versatile working tool that can be further equipped with wire rope or chain hoists. When used with a pulley block, the crane with a hoist or chain enables even more precise and effective handling of heavy loads. As a result, it finds application in multiple industries, such as construction, metallurgy, and the chemical sector. With the gantry crane, tasks such as warehousing, assembly, loading and unloading, and repairs can all be performed with high accuracy and safety, leading to increased work quality. Technical Specifications: Capacity: 2000 kg Double T-beam: 100 x 180 mm Height: 2400 mm – 3600 mm Width: 2360 mm Weight: 168 kg Crane supplied without hoist shown in the pictures. Gtsdporidh Nofx Adxet

Stanje: novo, dvižna višina: 16.000 mm, Leto izdelave: 2025, Teža Lastna teža: 2.850 kg Funkcionalno Dolžina droga: 930 cm Dolžina zgornje roke: 4,3 m Gtsdpfx Aox Tq Thodxjt Dvižna zmogljivost: 3.000 kg Oznaka CE: da Stanje Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Stanje sprednjih pnevmatik: 100 Stanje zadnjih pnevmatik: 100 Največja nosilnost na koncu iztegnjene roke: 200 kg Višina kljuke pri vodoravni roki: 1370 cm Višina kljuke pri nagibni konici: 1640 cm Pogoji dobave: FCA, DAP, EXW Transportne mere (D x Š x V): 3,2x0,77x2 Zadnji pregled: 2025-09-30 Država izdelave: NL Minimalna dolžina roke: 205 cm Dodatne informacije Za več informacij kontaktirajte prodajni oddelek.

Stanje: novo, The KNWP 30 M is a high-quality manual workshop press, manufactured in Europe, making it ideal for general assembly and straightening tasks in mechanical workshops, garages, and metalworking shops. This robust press enables safe and professional work and is versatile in use, for example when pressing in and out bearings, straightening beams, shafts, axles, and profiles, or carrying out load tests. With a pressing force of 30 t and a total ram stroke of 160 mm, the KNWP 30 M offers the perfect solution for your pressing and stamping tasks. The switchable 2-stage hydraulic system allows for both rapid and working strokes, while the sturdy and ergonomically designed machine frame as well as professional workmanship ensure durability. You can also flexibly adjust the height of the support table. Invest in the KNWP 30 M workshop press for maximum efficiency and quality in your workshop. Order now! Gedeuyh Sgepfx Adxott

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. This indispensable device enables quick and cost-effective removal of contaminants. A significant advantage is the ability to use the washer indoors. The washing process is performed in a closed circuit, using a cleaning fluid heated up to 70°C. The solution is delivered through a spray gun nozzle at a pressure of up to 8 bar, thoroughly cleaning even hard-to-reach areas and heavily soiled parts from carbon deposits, grease, or oil. Both temperature and cleaning fluid significantly increase washing effectiveness. The unit features adjustable feet for leveling. The washer is highly effective for turbocharger reconditioning and for cleaning heavily soiled parts made of steel, cast iron, aluminum or other alloys. The washer lid is equipped with pneumatic cylinders, enhancing safety and ease of use. The washer features a dual-function spray gun: it can deliver only air or air mixed with cleaning fluid. Cleaned parts can be dried using compressed air. The washer is equipped with an intuitive control panel. - Adjustable water temperature - Smooth air pressure regulation - Manometer - Separate switch for detergent/water heating - Separate power switch Technical specifications: - Capacity: 160 L - Detergent heating: up to 70°C - Fluid tank capacity: 8–14 L - Working pressure: 5–8 bar - Weight: 47 kg - Dimensions: 770 × 600 × 1330 mm - Adjustable air supply Gtedpeuc Tn Aefx Adxot - Pneumatic spray gun - Illuminated cabin - Ventilation Please note: the parts washer is supplied for self-assembly. Price does not apply to machines purchased in Poland.