Cnc Weeke nakup rabljenega (76)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, rabljeni CNC-obdelovalni center Nesting stroj Proizvajalec: Weeke Tip: Optimat BHP 210 Leto izdelave: 2011 4-osni nesting stroj, O-TRIX delovna miza 3700 x 2200 mm Vakuumska črpalka 3x po 300 m³/h z ogrodjem Območje dela X: – 3700 mm Območje dela Y: – 2100 mm Območje dela Z: – 100 mm 25 navpičnih vrtalnih vreten Rezkalno vreteno 12 kW do 24000 vrt./min s C-osjo, 360° interpolacija, krožno hlajenje s tekočino Itodeymzfgjpfx Abxoh Iznosna šoba na rezkalnem orodju, integrirana v odsesovalni kapuci – 14-kratni izmenjevalnik orodij zadaj Dvignjena delovna miza (naprava) 3700*2100 mm, nosilnost 3500 kg Višina sklada 480 mm Vmesna manipulacijska miza Vakuumska roka za pozicioniranje surovih plošč, vstopni nosilec Izlagalna naprava, transportni trak 4000*2100 mm Krmiljenje POWERCONTROL PC 85 s TFT 17" WoodWop 6.0 vklj. MDE in programska oprema za proizvodne liste Woodnest Complete in Woodnest Professional Dobava izključno prikazanih orodij in HSK vpenjal!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, število osi: 3, Ta 3-osna HOMAG WEEKE OPTIMAT ABD150 je bila izdelana leta 2014. Gre za rabljeni večvretenski vrtalni stroj, zasnovan za natančno vrtanje in vstavljanje moznikov. Če iščete kakovosten vrtalni stroj, razmislite o modelu HOMAG WEEKE OPTIMAT ABD150, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. • Rabljeni vrtalni in vstavljalni stroj za moznike Itodpey Dgpaofx Abxoh

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, največja hitrost vrtenja: 2.970 obr/min, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 1.000 mm, Oprema: CE označba, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Itsdpoyzy T Tofx Abxoh Minimum panel length: 250 mm Minimum panel width: 100 mm Number of lower vertical groups: 5 Number of upper vertical groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of lateral horizontal groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Installed total power: 35 kW EQUIPMENT Lateral horizontal groups Group positioning via CNC Z-axis positioning via CNC Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual physical and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6157

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, vhodni tok: 50 A, število osi: 3, število mest v zalogovniku orodij: 12, skupna dolžina: 5.000 mm, skupna širina: 2.900 mm, skupna masa: 4.500 kg, Oprema: CE označba, dokumentacija / priročnik, CNC rezkalni stroj z magazinom za 12 orodij, drži obdelovanec s pomočjo vakuma, vključuje vakuumsko črpalko. Ijdjza U Nxepfx Abxoth

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Prodajam vertikalni pretočni CNC rezkalno in vrtalni stroj HOMAG Weeke Drillteq V-200 (prej BHX 055), letnik 2023. Konfiguracija: 1 kos rezkalna enota z avtomatsko menjavo orodja, 4 pozicije HSK63 13 + 4 + 2 kosov vrtalnih vreten 1 kos utorska žaga S povratno funkcijo, ki vrača elemente nazaj k operaterju ali zadaj kot pretočni stroj. Itjdsy Hfp Repfx Abxoh Stanje kot novo. S popolno dokumentacijo in CE. Takoj na voljo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Stroj je v odličnem stanju in trenutno v vsakodnevni proizvodnji (približno 2–3 ure na dan). Zaradi povečanih zahtev po proizvodni zmogljivosti ga bo zamenjal novejši, večji stroj. Itedpfx Absym Tc Roxeh Stroj je takoj na voljo. Tehnične specifikacije in podrobni podatki so prikazani na priloženih fotografijah. Na zahtevo kupca je mogoče urediti svetovno dostavo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HOMAG WEEKE OPTIMAT ABD 150 je visokozmogljiv CNC stroj, zasnovan za natančno vrtanje, vstavljanje moznikov in montažo okovja v proizvodnji pohištva in obdelavi plošč. Stroj je idealen za mizarje, proizvajalce pohištva in industrijske lesnopredelovalne obrate, ki potrebujejo natančno in učinkovito avtomatizirano obdelavo. Lastnosti stroja: CNC-krmiljena enota za vrtanje in vstavljanje Itodpfxsym Nvtj Abxsh Integriran sistem za lepljenje in vstavljanje moznikov Robustna industrijska konstrukcija Kompaktne dimenzije Uporabniku prijazen upravljalni panel CE certifikat Stroj je redno vzdrževan in pripravljen za uporabo.

Stanje: zelo dobro (rabljeno), 3-osni (X-Y-Z) CNC OBDELOVALNI CENTER Premična plošča (obdelovanec), premični delovni glavi Vertikalna plošča (obdelovanec) Krmiljenje POWERCONTROL + POWERTOUCH Programska oprema woodWOP Varnostna kabina delovne glave Št. 1 blokada za vpenjalne čeljusti obdelovanca na delovnem področju Pogon obdelovanca s transportno verigo Minimalne dimenzije obdelovanca (X-Y-Z) mm 200 x 70 x 12 Maksimalne dimenzije obdelovanca (X-Y-Z) mm 3050 x 850 x 60 Skupna priključna moč (kW) 11,5 (pribl.) DELOVNE SKUPINE: Št. 1 vrtalnih agregatov (moč (kW) 2,3) z vertikalnimi vreteni: Itsdpfsyywcvox Abxeh - Št. 13 neodvisnih vertikalnih vrtalnih vreten (V13 High Speed) - Št. 6 neodvisnih horizontalnih vrtalnih vreten (4 v osi X + 2 v osi Y) Št. 1 rezkalna žaga za utore (za obdelave v X-osi); premer (mm) 100 Št. 1 vertikalno glavno vreteno (rezkalni agregat) HKS63 (moč kW 5) Avtomatski sistem menjave orodij – število mest v magazinu (št. 4 mest za orodja)

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled 'FLEXIBLE' MACHINING CENTER Moving table (workpiece), static working head – horizontal table (workpiece). Control system: PowerControl PC86 powerTouch (woodWOP software). Safety enclosure for the working head. No. 2 workpiece clamps for access to the working area. WEEKE pre-positioning unit for quick positioning of workpieces in the machine with clamping jaws. Support table (workpiece support) at infeed; outfeed table (with powered belt). With automatic panel pusher. Min. workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm). Max. workpiece dimensions (X-Y-Z) mm: 3000 x 1000 (optional 1300) x 80 (2 x 40 mm). Simultaneous processing of up to 2 workpieces (on the Z-axis). Separate switch cabinet and operator console. WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW). WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. Isdpfjyyvttex Abxeth No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW).

Stanje: zelo dobro (rabljeno), Portal machine Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Chip conveyor belt Total connected load (kW): 60 WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Iedpfx Aedg Itnsbxeth Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel feeding: No. 2

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Itedpfodz Uk Tjx Abxoh Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Stanje: zelo dobro (rabljeno), CNC flexible automatic through-feed drilling machine (gantry type) with dowel insertion system. Movable panel (workpiece), movable working head (horizontal panel-workpiece). Control: Power Control, Software: WoodWOP. Integrated safety cabin for the machine. Itsdpfxjd Nvi Ds Abxeh Workpiece feed with triple transport belt. Feed speed (m/min): 1 – 90 (approx.). Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X-Y-Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS – TOP SIDE: Drilling unit with vertical spindles (Qty): 1 Independent vertical drilling spindles (Qty): 38 + 3 special Independent horizontal drilling spindles (Qty): 6 Grooving saw unit (for X-axis machining) blade diameter (mm): 100 Vertical main spindle (milling unit): 1 x SK 30 (vertical main spindle power kW 6) Automatic tool change system, carousel changer, positions: 3 WORKING UNITS – HORIZONTAL: Drilling unit with horizontal spindles (Qty): 2 Horizontal drilling spindles – right side (Qty): 13 + left side (Qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (Qty): 1

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) Iodpfxegwbbqo Abxoth No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, CNC Flexible Gantry Machine Horizontal Throughfeed Table Control System: Power Contro Open powerTouch, Software: WoodWOP (TAPIO Ready) Infeed Table (panel support) + Outfeed Table (panel support) Panel feed via 3 transport belts Min. workpiece dimensions (X-Y-Z): 250 x 100 x 12 mm Isdjx Aqi Espfx Abxeth Max. workpiece dimensions (X-Y-Z): 2500 x 1050 x 60 mm Special lateral guiding system for workpieces with "sensitive" edges 3 upper vertical pressure devices Powered conveyor belt for waste disposal Integrated electrical and control cabinet Total installed power: approx. 47 kW OPTIONAL: Wireless barcode scanner 2 WORKING UNITS (TOP) – (SERVO MOTOR for X-Y-Z axis): 4 V15 drilling heads (4 x 2.3 kW) each with 15 vertical spindles (total of 60 upper spindles) 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR for X-Y-Z axis): 6 V32 drilling heads (6 x 2.3 kW) each with 32 vertical spindles (total of 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 H21 drilling heads (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Itodpfx Aboh Ryhnsxsh Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Itodpolkdpmjfx Abxeh Moving table (workpiece), stationary operating head – Horizontal table (workpiece) Control unit: PowerControl (woodWOP software) Operator head safety enclosure 2x safety interlock workpiece clamping chucks in the working area WEEKE pre-positioning unit – for faster positioning of workpieces in machines with clamp grippers. Support table (workpiece support) at infeed – outfeed table (with conveyor belt) Includes automatic panel pusher Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1000 (option 1300) x 80 (2 x 40 mm) Two workpieces can be machined simultaneously (in the Z-axis) Separate electrical and control cabinet UPPER MACHINING UNITS: 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 kW 23 independent vertical drilling spindles (drill head output 2.3 kW) 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW) LOWER MACHINING UNITS: 23 independent vertical drilling spindles (drill head output 2.3 kW) 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW)

Stanje: generalkompletno obnovljen (rabljeno), PC control (Power Control) Software No. 2 motorised through-feed conveyor belts Iodpfx Aevhcbzobxsth No. 2 horizontal drilling supports (digital display of the position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Maximum working width (mm): 3000 Minimum working width (mm): 250 No. 6 lower vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower drilling supports No. 2 upper vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 50 / 60 (approx.)

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 Itsdpeivawpefx Abxeh No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTRE (POINT-TO-POINT) – 4 Axes Gantry-type design Power Control CNC – woodWOP software Safety enclosure for the machining head Clamping table with 6 consoles Safety tread mats LASER system on the X-axis for console positioning and on the Y-axis for vacuum pod positioning Automatic tool change system 2 disc-type tool changers – magazine/tool positions: W8 (8 rear) + (8 lateral) Maximum working area (X – Y – Z): 3130 x 1250 (1550) x 100 (150) mm 2 working zones – 1 x vacuum pump (capacity 70 m³/h) Chip conveyor Itedpfxeyxn Tio Abxjh With separate electrical cabinet and control system Total connected load: 32 A WORKING UNITS (TOP): 12 independent vertical drilling spindles (High Speed 7500) 6 independent horizontal drilling spindles (4 in X-axis + 2 in Y-axis) Drilling head motor power: 2.3 kW 1 grooving saw unit, diameter 125 mm, N1 – swivels 90° in X-Y direction 1 vertical main spindle (milling unit) HSK 63, 9 kW OPTION: Drilling and milling unit with 4 horizontal spindles (cross spindle) BARCODE READING SYSTEM PACKAGE – PROFESSIONAL

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Itsdpfxeh E Sghe Abxoh Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: zelo dobro (rabljeno), PC-krmiljenje Power Control PC85T Programska oprema WoodWOP + TOPDRILL Št. 2 prehodnih motoriziranih transportnih trakov Št. 2 horizontalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 1 vrtalna enota za vsak horizontalni vrtalni nosilec (1 x 1,5 kW) Št. 21 vreten za vsako horizontalno vrtalno enoto Največja delovna širina (mm) 2500 Najmanjša delovna širina (mm) 250 Št. 4 spodnji vertikalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 2 vrtalni enoti za vsak spodnji vertikalni vrtalni nosilec (2 x 1,5 kW) Št. 4 zgornje vertikalne vpenjalne enote za obdelovance Ijdeyv Ev Aspfx Abxeth Transportni trak za odvoz odrezkov Skupna priključna moč (kW) 35

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, številka stroja/vozila: 0-250-11-2614, Funkcionalnost: popolnoma funkcionalen, Spodnja podporna enota za obdelavo Zgornja podporna enota za obdelavo Isdey Ezgiepfx Abxoth Dolžina obdelovanca: min. 250 – maks. 3000 mm Širina obdelovanca: min. 70 – maks. 1000 mm Debelina obdelovanca: min. 8 mm – maks. 80 mm Zlaganje obdelovancev: maks. 2 kosa Oprema: POSTAJE ZA VSTAVLJANJE MOŽNIKOV x 2 VERTIKALNA VRTALNA ENOTA 2 V 38 HIGH SPEED 7500 HORIZONTALNA VRTALNA ENOTA 2H8X/2 Y REZALNA ENOTA ZA UTORJE N2 X-Y 90 REZKALNA ENOTA F2-ETP- 6 KW KRIMINALNI SISTEM: POWERCONTROL S POWERTOUCH SISTEM ZA BRANJE ČRTNIH KOD FUNKCIJA VARČEVANJA Z ENERGIJO

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) Itedslikvhopfx Abxoh X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA

Stanje: rabljeno, številka stroja/vozila: 007734, Delovno območje os X: 3050 mm Delovno območje os Y: 850 mm Moč glavnega vretena: 5 kW Število vrtalnih vreten: 19 Iodpfsw Idb Hox Abxeth

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.035 mm, pomik osi Y: 1.720 mm, pomik po osi Z: 380 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Ponujamo pripravljeno obdelovalno središče Weeke Optimat BHC 550, letnik 2003. Proizvajalec: Weeke Model: Optimat BHC 550 Letnik: 2003 Stanje: pripravljeno za uporabo Vrsta stroja: obdelovalno središče Itodox Nw Drepfx Abxjh Za vprašanja ali dodatne informacije nam pošljite sporočilo ali nas pokličite.