Biesse Rover 321 nakup rabljenega (313)

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: 1000021515, Funkcionalnost: popolnoma funkcionalen, moč: 21,5 kW (29,23 KM), skupna masa: 330 kg, The company DDG INSOLVENCY I.P.U.R.L., headquartered in Cluj-Napoca, str. Septimiu Albini, no. 115, Cluj county, VAT no. RO27987796, registration no.: 2A0522, through the insolvency practitioner Godorogea Daniel-Lucian in his capacity as judicial liquidator for ELEMENTO MOBILI S.R.L. - in bankruptcy (în faliment, in bankruptcy, en faillite), with registered office in Dej, str. Dumbrava Roșie, no. 6, ground floor, apt. 1, Cluj county, registered with the Trade Registry attached to Cluj Tribunal under no. J12/2389/2016, company registration number 36225390, appointed by Civil Judgement no. 1278 dated 03.07.2025 issued by Cluj Specialized Tribunal in file no. 442/1285/2025, is organizing a public auction with ascending bids for the sale of the assets identified in this announcement. The first auction will take place on 11.02.2026 at 15:00 at the headquarters of DDG Insolvency I.P.U.R.L., Cluj-Napoca, str. Septimiu Albini, no. 115, Cluj county. Should the asset not be awarded, the auction will be repeated on 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, 18.03.2026, under the same conditions and at the same time. For asset inspection, the liquidator will set a viewing day on 04.02.2026 between 10:00-14:00. Interested parties are invited to contact the judicial liquidator and indicate their intention to participate prior to the scheduled viewing date. Upon awarding, the judicial liquidator will issue a tax invoice for the value of the assets awarded. Conversion into RON will be carried out at the issue date of the tax invoice, using the exchange rate established by the National Bank of Romania (BNR) for that day. The bidding increment shall be 5% of the starting price. The auction documentation for participation will be prepared by the judicial liquidator in accordance with standard practices in the field, will include the regulations for participation, and will be provided by the insolvency practitioner at the price of 500 RON + VAT for assets up to 5,000 euros, and 1,000 RON + VAT for assets over 5,000 euros. The documentation may be purchased at the liquidator's office or by phone and will be sent to the participant by e-mail. The participation guarantee will be 10% of the starting price. This, along with the registration documents, must be submitted at least 24 hours prior to the auction at the judicial liquidator's office. The participation guarantee will be deducted from the price for the winning bidder and will be refunded to non-winning participants. In the case of identical final bids, the winning bidder will be the one committed to paying the full price in the shortest time. The price payment term is 5 working days from the award date. If the remainder of the price is not paid, the awarded bidder loses the advance paid as a guarantee and will no longer be able to participate in future organized auctions. Gbsdeyfgxpopfx Agysi

Stanje: rabljeno, Leto izdelave: 2014, Centre d’usinage CNC Biesse Skill 12 24 G FT Gjdewnhanepfx Agysbi Année de fabrication : 2014 Numéro de machine : 60961 Porte-outil : HSK F63 10 têtes de perçage verticales 12 positions de changement d’outil Logiciel : BiesseWorks Axe X : 2465 mm Axe Y : 1260 mm Axe Z : 324 mm Démonté pour le transport sur une remorque standard ; 4500x2200x2400 mm ; poids net 2000 kg - Année de fabrication : 2014 - Documentation disponible : Oui - Certificat CE : Non - Système de serrage d’outil : HSK-F63 - Outil de perçage fourni : Oui └ Broches de perçage verticales [Nb] : 10 - Positions de changeur d’outil [Nb] : 12 - Zone de travail X [mm] : 2465 - Zone de travail Y [mm] : 1260 - Zone de travail axe Z [mm] : 324 Informations financières TVA : Le prix indiqué s’entend TVA en sus TVA/Régime de marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Glenn Smeets

Stanje: dober (rabljeno), Leto izdelave: 2008, Single-sided Biesse edge bander STREAN B1/8.0 – Year 2008 - Code 0000015: CNC Y-axis on infeed guide - Code 0000011: Right-angle panel feeder - Code 0000517: Automatic lubrication C1 - Code 0000017: Parallelogram workpiece supports 5.5–8.5 - Code 0000439: B1 installation kit with panel return device - Code 0000136: Liquid jet application unit - Code 0000669: RT20 trimming unit, 2×3.5kW, 9000RPM - Code 0000336: Additional pair of diamond cutters H=60 - Code 0000469: SP20 gluing unit - Edging thickness: 0.3–3mm - Bswyjukh Tqjhhpkswt (unspecified code) Gbsdpfx Aoxala Tsgyji - Wood thickness: 20mm - Panel thickness: 10–60mm - Code 0000244: CNC Y-axis for pressure zone - Code 0000682: 2-position edge magazine for SP10 and SP20 - Code 0000144: Additional glue tank - Code 0000367: IT90-S end trimming unit. 2×0.3kW, 12000RPM - Code 0000704: Solid hardwood edging kit up to 20mm thick for IT90 - Code 0000711: 3-position pneumatic kit for IT90 - Code 0000151: RS10 flush/recessing unit – straight tool L=20. 2×1.3kW, 12000RPM - Code 0000901: Straight tool, length +30 (solid wood) for RS10 - Code 0000152: 2.4kW motors for RS10 flush trimming group – straight tool L=30 - Code 0000536: 2-position automatic adjustment for RS10 - Code 0000158: RF=40 angle trimming unit – 25° bevel, R=1.5/2/3mm. 2×0.65kW, 12000RPM - Code 0000651: Copying devices for RF10-RF30-RF40 units - Code 0000579: AR30 multifunction corner rounding unit R=2mm - FAST system with 2 pre-selection positions via control panel - 2×0.35kW, 12000RPM - Code 0001017: 4-position pneumatic system for AR30 - Code 0000165: RB10 edge scraper group R=2mm - Code 0000652: Copying devices for RB10-RB30-RB40 groups - Code 0001004: RC20 glue scraper group - Code 0000171: SZ30 overlapping oscillating brush unit. 2×0.18kW, 1400RPM - Code 0000989: Liquid jet application kit for SZ30, SZ60 - PH10 edge heater - WITHOUT PANEL RETURN DEVICE

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Biesse Klever 15 - 2010. CNC rezkalnik s ravno mizo in avtomatskim menjalcem orodij. Kupcem v Združenem kraljestvu: £15,000 (GBP) + DDV. Kompaktna zasnova za varčevanje s prostorom. Delovno polje: 1563mm x 3126mm x 150mm. Naprava za prednastavljanje dolžine orodij. Avtomatski menjalec orodij z 8 pozicijami. Vertikalni vrtalni blok s 5 pozicijami. Programska oprema Biesse Works, možnost povezave s CAD paketi. Velika vakuumska črpalka. Gsdsynkg Aepfx Agysbi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, MC Winkelaggregat HSK 63 F for inclined drilling at 7 degrees Excellent condition Godowmr Uyspfx Agyebi See photos Location: ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, MC Biesse angle aggregate HSK 63 F with 2 outputs Gedpfx Agowmtaqoyobi Manual Key Collet Location: ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable workpiece plate, stationary working head – Horizontal workpiece plate Control system with Biesse Works software Safety cabin for working head – Safety tread mats No. 1 Infeed table (with conveyor belt) left No. 2 Workpiece clamping block stops within the working area No. 1 Outfeed table (with conveyor belt) right Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1000 x 60 Total connected load (kW): 20 WORKING UNITS (TOP): - No. 1 Electrospindle with HSK D-50 adapter (power 4.8 HP) with static frequency converter - No. 1 Grooving saw (fixed in X direction), diameter 150 mm, power 2.3 HP, with static frequency inverter Gsdpfxodh Tf Ue Agyebi - No. 29 vertical drilling spindles - No. 10 horizontal drilling spindles (8 in X, 2 in negative Y direction) WORKING UNITS (BOTTOM): - No. 1 Electrospindle with HSK D-50 adapter (power 4.8 HP) with static frequency converter - No. 1 Grooving saw (fixed in X direction), diameter 150 mm, power 2.3 HP, with static frequency inverter - No. 29 vertical drilling spindles - No. 10 horizontal drilling spindles (8 in X, 2 in negative Y direction)

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE, including for NARROW PARTS min. 65 mm, with high-speed conveying technology, No. 3 CNC-controlled through-feed drilling machines (one for lateral drilling in longitudinal direction), and No. 1 through-feed crosscut saw (splitter) Gedstr Envopfx Agyjbi Comprising the following machines: W05024A) Loading device (gantry) "RBO (BIESSE)" model Winner C W05024B) 1st Single-sided sizing and edge-banding machine (left) "BIESSE" model Stream SB1 TWIN W05024C) 2nd Single-sided sizing and edge-banding machine (right) "BIESSE" model Stream SB1 TWIN W05024D) 1st Turning device (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" model GPK-1 W05024E) Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 / 11.0 W05024F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024H) 2nd Turning device (90° TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" model GPK-2 W05024I) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (for lateral drilling in longitudinal direction) W05024J) Through-feed crosscut saw (splitter) "TECNOLOGICA" W05024K) Dust extraction and cleaning machine "WANDRES" W05024L) Stacking device (gantry) "RBO (BIESSE)" model Winner SC

Stanje: zelo dobro (rabljeno), COMPLETE 4-SIDED EDGE PROCESSING AND EDGE BANDING LINE, max. working width 3000 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X03001A) Loading portal (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided sizing and edge banding machine "BIESSE" Stream SB 1 - 7.5 X03001C) Workpiece turning device (90° LONGITUDINAL to TRANSVERSE) "RBO" Model GPK 1 X03001D) 2nd double-sided sizing and edge banding machine "BIESSE" Stream SB 2 - 11 X03001E) Workpiece turning device (90° TRANSVERSE to LONGITUDINAL) "RBO" Model GPK 2 Gjdpfx Aei Rbg Tegysbi X03001F) Unloading portal (with 2 unloading stations) "RBO" Model Winner S 3200

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten Gsdpfjdfgg Iex Agyjbi D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Moving horizontal table (workpiece), stationary machining head Control system (BiesseWorks software), with separate electrical control cabinet Machining head safety enclosure, safety tread mats Infeed table (workpiece support) at entry side No. 2 pneumatic workpiece clamping cylinders within the working area Outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm: 90 x 70 x 8 (approx.) Gjdpfowb Allox Agyebi Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1300 x 60 (approx.) Total connected load (kW): 24 WORKING UNITS (TOP): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW)

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE (also SOFTFORMING) with through-feed drilling machines, splitter, and high-speed automatic conveyor technology. Configured as follows: A) Infeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner C (1) B) 1st Double-sided sizing and edge-banding machine "BIESSE" model Stream SB1 11.0 Softforming C) 1st Rotation station (90° LONGITUDINAL–CROSS) "RBO (BIESSE)" model GPK-1 D) 2nd Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 9.5 E) 2nd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-2 F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) Gbjdpsttgy Hefx Agyei G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) H) 3rd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" model Split 4-84 LT L) Outfeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner SC (2)

Stanje: zelo dobro (rabljeno), Double-sided working machine Can be positioned after a through-feed drilling line (for the automatic processing cycle of drilling and doweling) Electronic control unit – Programmer RT 486 Through-feed motorized conveyor belts (No.) 2 Horizontal boring supports (No.) 2 Dowelling systems (and glue injection units) No. 6 LH + 6 RH Max. working width (mm) 3200 Min. working width (mm) 205 (approx.) Lower vertical boring supports (No.) 4 Drilling units per lower vertical support (No.) 2 x 1.8 HP Upper vertical workpiece clamps (No.) 2 Gedsdi R R Rspfx Agyobi Total connected load (kW) 11.5

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 2 horizontal upper support beams (with carriage gliding on them) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal adjustable metal arms with vacuum suction pads OPTIONAL: No. 2 external roller conveyors (on the floor) for stack input of panels to the loading station No. 1 external motorized roller conveyor (for receiving panels from loading station) Gbjdpfxeflc T So Agysi Separate electrical control panel Electronic control system Perimeter safety fencing with safety mats Total connected load 17.7 kW Operating capacity (cycles/min) approx. 16-20 Panel thickness (min/max) approx. 10-50 mm Min. panel dimensions approx. 250 x 320 mm Max. panel dimensions approx. 1200 x 3000 mm

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED DESTACKING - Bridge Vacuum system (with pump) No. 2 vertical support columns of the upper carrying beam No. 1 horizontal upper carrying beam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with vacuum suction cups, adjustable No. 2 external roller conveyors for stack discharge No. 1 external motorized roller conveyor for stack discharge, also with belt for rotation of panels by 90°. Dimensions approx. 7168 mm Separate electrical control panel Electronic controller OMRON Perimeter safety fencing with safety mats Operating capacity (cycles/min): approx. 16 - 20 Panel thickness (min/max): approx. 10 - 50 mm Min. panel dimensions: approx. 250 x 320 mm Gedpfxjd Rg Dzs Agysbi Max. panel dimensions: approx. 1200 x 3200 mm Total connected load: 20.8 kW

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Gedpfod Rg Dpjx Agyebi Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 Gjdpfxscggy Ss Agyjbi - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Stanje: rabljeno, Complete factory for furniture production, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (mm 5700x2700) with stacking system "SIRIO" SZ0M25) Panel saw "GIBEN" Mod. GammaDue (mm 3800x2200) SZ0M26) Panel saw (multi-blade saw) "GABBIANI" (finished panels mm 4250 x 2120) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (film lamination/glue on paper) SZ0M29) Press line "COLOMBO REMO" (mm 1400x9600) for paper/veneer/laminated materials SZ0M30) Press line "FRIZ" (mm 1400x6200) for paper/veneer/laminated materials SZ0M41) Double-sided edge banding and sizing line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided edge banding and sizing line "IMA" Combima Softforming with a second double-sided edge banding and sizing machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with splitter "NARDELLO" Mod. Elegance SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed system and stacker "TOMASSINI" Gbsdpecr U Ursfx Agyei SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and winding machine "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cross-cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Pre-assembly line for honeycomb panels SZ0M18) No. 6 multi-opening press "COLOMBO REMO" (mm??x mm??) SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI+ELMAG+ COSTA LEVIGATRICI" Many other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, racks (wall-mounted shelving), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel-inserting line, consisting of: VZ0250A) LOADING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min. - No. 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles); - No. 4 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control unit NC 500 for both machines. VZ0250C) AUTOMATIC DRILLING AND DOWEL-INSERTING MACHINE "BIESSE" Techno SDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min - No. 2 horizontal drilling supports (each with 6 horizontal supports – gluing and dowel-inserting tools) - No. 2 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 2 upper vertical workpiece clamps - No. 2 endless screws for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) OUTFEED STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor Gbedpfxsd Nviqj Agyoi

Stanje: zelo dobro (rabljeno), CNC-controlled Throughfeed Drilling and Dowel Insertion Line (3 machines) J06031) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps + 2 (endless) screw conveyors for chip removal Godpfxsg Urn Ee Agyebi J06032) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal J06033) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 4 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 4 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal CNC Control (Tooling System software + Woodmaster) CNC controls the movement (X-axis and Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axes Y1 and Y2) of the drilling units + (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the feed conveyors

Stanje: zelo dobro (rabljeno), ONE-SIDED LOADING STATION Upper traverse shiftable 180° (horizontal) Console table with vacuum clamps Lifting platform (internal) with motorized sheet metal roller conveyor Protective grille at the front to introduce the stack of panels Godpfx Agsd Tywgjyebi Separate control cabinet and operating panel External roller conveyor (on the floor) for feeding the stack of panels into the loading station External motorized roller conveyor (receives the panels) from the loading station, also with belt drive for 90° transfer of the panels. Operating capacity (cycles / min): 12–15 Panel thickness (min/max) mm: 10 – 40 Min. panel dimensions mm: 250 x 320 Max. panel dimensions mm: 1200 x 3000 Total connected load kW: 11

Stanje: zelo dobro (rabljeno), PC control type NC 400 (software) Feed-through motorized conveyor belts (qty.) 2 Gjdpfx Ajgk T Ttsgysbi Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 – Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 No. 4 upper vertical drilling supports Spindles per unit of upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops.

Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed drilling and dowel insertion line Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading station (gantry loader, double station) "RBO" Mod. Advantage C B) Inclined roller conveyor "RBO" with workpiece turning device (longitudinal-transverse) 90° C) Gantry CNC-controlled dowel hole drilling machine "BIESSE" FTT 800 Center A: 2 electrospindles ISO 30 (each 3.7 kW) with tool magazines with 3 positions each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool holder magazines (revolver) with 56 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) D) Transfer conveyor, with turnover unit (180°—top side down) "RBO" Mod. Ribaltatore E) Gantry CNC-controlled dowel hole drilling and dowel insertion machine "BIESSE" FTT 800 R8 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 Center A: 2 electrospindles ISO 30 (each 4.5 kW) with 3 tool magazines each. Center B: 2 preinstallations for the addition of 2 more electrospindles. Gbedpfjgvdkgjx Agysi 2 tool magazines (chain type) with 60 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Unloading station (gantry double station) "RBO" Mod. Advantage SC

Stanje: zelo dobro (rabljeno), Electronic control RT 483 No. 2 motorized throughfeed conveyor belts Feed speed (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports Gbodpofz Nanjfx Agyoi No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 continuous screws for chip removal Digital display of position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DE-STACKING STATION - Upper crossbeam horizontally movable by 180° - Support table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for stack of plates from destacking - External powered roller conveyor from destacking, also with belt drive for 90° transfer of plates Gbedpfxed Tyvxs Agyei - Working capacity (cycles / min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load kW: 11