Asfalt Rezalnik nakup rabljenega (1.761)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Readout (Heidenhain TNC 114) and Infinitely Variable Feed Technical Data: - Year of manufacture: approx. 1990 - Fixed angle table, clamping area: 800 x 450 mm - Spindle speed: 50 – 2240 rpm - Infinitely variable feed in 3 axes: 1 – 750 mm/min - Rapid traverse in 3 axes: 1400 mm/min Gkodpfx Abjxu Hkco Tof - Travel X/Y/Z: 500/500/380 mm - Vertical quill, SK40, extendable - Weight: approx. 1600 kg Accessories and Equipment: - 3-axis active digital display Heidenhain TNC 114 - Central lubrication system - Operating manual, programming instructions, electrical diagrams About the machine: Offered here is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control TNC 114, which means it can traverse a programmed distance in any axis, regardless of x, y, or z, and stops automatically upon reaching the set value. Four different zero points can be set; measurements can be input as absolute values or as incremental (chain) dimensions. The feed rate is infinitely variable from 0–750 mm and can be adjusted during milling operations. Rapid traverse can be activated at the push of a button. The spindle speed can be set in steps from 50 rpm to 2240 rpm, but only when the machine is stationary. The vertical milling head is fastened with three screws and can be removed or reattached within 2 minutes; it is manually mounted using the swing arm visible on the left side of the machine and can be easily swung aside. A particular feature of this machine is its exceptionally large travel ranges relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Furthermore, the machine is equipped with electronic protection for the vertical spindle. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: zelo dobro (rabljeno), Proizvajalec: LVD Model: Electra FL3015 Serijska številka: 36445 Država porekla: Belgija Leto izdelave: 2016 Tehnični parametri: Tip laserja: vlakenski (Fiber Laser) Gjdpfx Absxvawls Tskf Moč vira: 3 kW Delovno območje: 3000 mm × 1500 mm Vir laserja: Rofin FL030 Fiber Laser Source Serijska številka vira: 987 Leto izdelave vira: 2015 Dodatna oprema: Thermotec Chiller Unit – hladilna enota za stabilizacijo temperature vira laserja Donaldson Torit DCE DFPro-4SPK – sistem za odsesavanje in filtracijo dima Infeed/Outfeed Shuttle Table – avtomatska miza za nakladanje in razkladanje Light Guards – svetlobni varnostni sistem

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 1.400 mm, širina mize: 1.200 mm, S kovinsko mizo 1400x1200 mm Godpfxexlabps Ab Tskf

Stanje: rabljeno, Leto izdelave: 2003, Maszyna używana Rok produkcji: 2003 Wyposażenie i dane techniczne: Godew I H Rqspfx Ab Tjkf - Automatyczna regulacja wysokości i kąta wrzeciona z impulsami dziesiętnymi - Mechaniczny wskaźnik wysokości wrzeciona i elektroniczny wskaźnik kąta nachylenia - Pokrywa odchylana z prowadnicami aluminiowymi - Regulowany otwór stołu za pomocą przesuwnego elementu blatu - System szybkiej wymiany narzędzi - Długie stoły z wysuwnym podparciem elementu obrabianego - Wymiary stołu: 2500 x 780 mm - Regulacja wrzeciona: od -45° do +45° - Średnica wrzeciona: 30 mm - Skok wrzeciona: 230 mm - Maks. otwarcie stołu: 300 mm - Silnik: 5,5 kW z automatycznym rozruchem gwiazda-trójkąt - Prawo-lewoskrętnie - Prędkości obrotowe: 3000/4500/6000/8000/10000 obr./min - Elektroniczne programowanie wysokości wrzeciona, kąta nachylenia wrzeciona oraz pozycji przykładnicy (przykładnica frezarska) - Odsysanie górne i dolne: 120 mm Wymiary: 2570 x 1450 mm Waga: ok. 670 kg Dostępność: od zaraz Lokalizacja: Röllbach

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Rezalo za kruh z okroglim rezilom, malo uporabljeno, kupljeno za testne namene in nato shranjeno. Gjdpfx Ajxx Skijb Tokf

Stanje: dober (rabljeno), Leto izdelave: 2010, Magurit 314 Rezalnik zamrznjenih blokov mesa Magurit STARCUTTER 314 je rotacijski industrijski rezalnik mesa z močjo 9,2 kW, namenjen srednje velikim obratom. Zmogljiv je za večino običajnih velikosti blokov, bodisi standardnih EURO-2 ali ameriških 60 funtov, in omogoča neprekinjeno obdelavo zamrznjenih izdelkov pri temperaturah do -30°C. Kosi so preko vgrajenega pnevmatskega dovajalnega bata potisnjeni v rotirajoči rezalni boben. Edinstvena rezila C-Cut omogočajo enostavno in učinkovito obdelavo do 8 ton na uro ob visoki kakovosti reza. Z enim prehodom skozi stroj nastanejo kosi debeline med 3 in 9 mm. Proizvajalec: Magurit Model: 314 Leto: 2010 Gedpfx Abox Exizo Tskf Kapaciteta: do 4.000 kg/h Moč: 9,2kW / 400V / 20A / 50Hz Mere rezalne površine: 410x250x650 mm Debelina reza: 3, 6, 9 mm Mere stroja D׊×V: 2.200×1.000×1.400 mm Teža stroja: 960 kg.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm Gkodpfxeu Nvxmo Ab Tjf >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Kilia - Vakuumski kuter s prostornino 325 litrov Gkedpfxoxyrdfe Ab Tjf Znamka: Kilia Prostornina: 325l Vakuumski kuter Kilia je napredna industrijska naprava, namenjena rezanju, mešanju in emulgiranju mas v vakuumskih pogojih. Z veliko prostornino 325 litrov je idealna rešitev za predelavo večjih količin surovin v proizvodnih obratih.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Deckel FP2 Aktiv, orodjarska rezkalna naprava s 3-osnim Heidenhain TNC 111 Aktiv digitalnim prikazom. Stroj je v zelo dobrem stanju, prihaja iz državnega izobraževalnega oddelka. Fiksna miza, vreteno SK 40. Oprema: različne vpenjalne puše in nosilci rezkarjev, kontrapodpora. Zelo dobro delujoč, pripravljen za uporabo. Možna predstavitev pod napetostjo po dogovoru. Gedpfx Abexyhmvo Tjkf

Leto izdelave: 1995, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Kompaktna žaga, odlična za rezanje kamna, marmorja in granita. Stroj je popolnoma funkcionalen. Značilnosti: Hidravlična miza, zelo praktična za uporabo Električni pomik glave Disk: Ø 600 mm Gksdpfjx A Dc Ssx Ab Tsf Z-hod: 500 mm

Stanje: dober (rabljeno), Leto izdelave: 2003, Proizvajalec: Seydelmann Model: K 60 Ultra Letnik: 2003 Kapaciteta: 60 litrov Hitrosti: 2 hitrosti posode / 2 hitrosti mešanja Gedpfsx Eiwyox Ab Tokf Moč: 20kW / 400V / 50Hz Dimenzije stroja D x Š x V: 1.200x950x1.250 mm Teža stroja: 800 kg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 Gkjdpfxst Aav Ie Ab Tof >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, CFS VSM 500 - Vakuumski Kuter Znamka: CFS Model: VSM 500 Leto proizvodnje: 1992 Prostornina: 500 l Vakuumski kuter CFS VSM 500 je napredna industrijska naprava, namenjena rezanju, mešanju in emulgiranju mas v vakuumskih pogojih. Z veliko prostornino 500 litrov je idealna rešitev za obdelavo večjih količin surovin v proizvodnih obratih. Gkjdpfxexyrc Us Ab Tjf

Leto izdelave: 2005, obratovalne ure: 900 h, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rezkalna žaga GMM - Lexta 36 (4 osi) Večnamenska žaga za marmor, granit in kamen, ki zagotavlja visoko natančnost in enostavno uporabo. Godpfx Aox A A Nwjb Tokf Značilnosti: - 4 osi - Miza: 3540x1850 mm - Disk: premer 800 mm - Zanesljiv in enostaven za uporabo stroj

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm Gjdpfxet Aarpo Ab Tekf >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, as new! Technical data: - Machine No.: 2101-51084, year 2011 - Fixed angle table - Spindle speed: 40 - 2000 rpm Gkjdpfx Abowpi Dqj Tof - Feed on 2 axes - Drive power: 1 / 1.5 kW - Travel X/Y/Z: 300/150/340 mm - Vertical quill SK40 and horizontal quill SK40 - Drawbar system: S20x2 - Weight approx. 700 kg Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Hydraulic vice - Collets - Tool holders - Milling cutters - Operating manual - Coolant system About the machine: Offered here is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. Included accessories are a hydraulic vice with swivel base, collet chucks, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 Gkjdpfx Aevb Ud Ueb Tef >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: Gkedju Racrspfx Ab Tsf >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system Gjdpfx Aju T D Nrob Tjkf >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Gjdou Nvwvspfx Ab Tskf Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout - Excellent Condition! Technical Data: >> Machine No.: 55249/08, Year: 2010 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar thread S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system Godpfx Asxu Hbhob Tokf About the Machine: Offered is a Deckel FP1 universal milling machine, professionally repowered by FPS and in like-new condition. The accessories include a hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout enables easier and more precise work. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-axis Active Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed in TOP Condition Technical data: >> Year of manufacture: 1979 Machine no.: 2202-10777 >> Rigid angle table (newly planed) >> Spindle speed: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes Gjdpfeuc Ubwex Ab Tskf >> Drive power: 2.2 kW >> Spindle brake >> Travels X/Y/Z: 400/220/400 mm >> Vertical milling head on spindle carrier, adjustable by 150 mm >> Vertical and horizontal quill – SK40 extendable >> Drawbar thread: S20x2 >> Weight approx. 1400 kg Accessories and equipment: >> 3-axis TNC 113 Active Digital Readout by Heidenhain >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from the laboratory of a government facility where it was rarely used. The machine exhibits minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this later FP2 model, the feed can be infinitely adjusted on all three axes, and rapid traverse is available on every axis. A major advantage is the active 3-axis digital readout. Using the Heidenhain path control, you can enter dimensions that the machine then approaches automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. You are welcome to inspect and test the machine under power on site.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed As-New CONDITION Technical Data: Gjdou R D I Sspfx Ab Tjkf >> Year of manufacture: 1987 Machine no. 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Automatic central lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalogue About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in an as-new, original condition. The machine has very minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be infinitely adjusted on all three axes, and the machine also features rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter dimensions which the machine then approaches automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically inspected. Thanks to the Heidenhain digital readout, working with the machine is easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed Angle Table >> Spindle Speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle mount, adjustable by 100 mm >> Vertical quill and horizontal quill – SK40 taper >> Drawbar system M16 Godexu E R Ijpfx Ab Tskf >> Weight: approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital readout >> Centralized electric lubrication >> Coolant system >> Operating manual and spare parts diagram Details about the Machine: Offered is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed in all three axes, as well as rapid traverse in these directions. A major benefit is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter target dimensions, and the machine will automatically move to them. This FP1 was used in a training workshop where it saw only occasional use. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this outstanding machine under power on site. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture approx. 1975, machine no. 0681 >> Swiveling and tilting table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extensible vertical and horizontal quill - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Accessories and Equipment: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Centralized lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swiveling and tilting table is as good as new. An oil change has been performed. The machine has been mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel FP3 under power on site. Gkedpfxjxu E I He Ab Tef The machine is immediately available!!!