Ultrazvočni generator 2,75 kVA

MS ULTRASONIC 20 ADVANCED

Stanje: dober (rabljeno), Ultrazvočni senzor, ultrazvočni generator -Proizvajalec: MS ULTRASONIC, ultrazvočni generator sonxGEN ADVANCED 20 -Tip: 20 ADVANCED Št.: 608883.1 Gksdpfx Aoxvpflshbod -Moč: 4,4 kVA -Količina: 1x generator na voljo -Mere: 360/95/V250 mm -Teža: 8,5 kg

Stanje: novo, Leto izdelave: 2026, skupna širina: 680 mm, skupna dolžina: 780 mm, skupna višina: 670 mm, največja dovoljena obremenitev: 15 kg, kapaciteta rezervoarja: 105 l, trajanje garancije: 12 meseci, notranja višina: 400 mm, notranja dolžina: 600 mm, notranja širina: 500 mm, Mere rezervoarja: (D x Š x V) 600 x 500 x 400mm Zunanje mere: (D x Š x V) 780 x 680 x 670mm Godjx E S H Tepfx Ahbokd Standardna obremenitev: košara 15kg Volumen rezervoarja: 105 litrov Ultrazvočna moč: 6kW (spodnji oddajniki) Grelnik: 6kW, 30-70°C Napetost: 400V/50Hz Iztočni ventil, prelivni ventil, električno ogrevanje, Generator z booster funkcijo, frekvenca 40kHz, Nadzor nivoja, vklj. pokrov, vklj. košara.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: div., Naprodaj: • 1x Kuris Pionier, polagalni stroj vključno z namizom za polaganje, vključno z avtomatskim servo-rezalnikom in vključno s trakom noža. Kompletna cena: 6.750 € (pri razstavljanju s strani kupca) Gkedpfowpww Esx Ahbod • 1x Kuris Pionier, polagalni stroj vključno z namizom za polaganje in vključno s trakom noža. Kompletna cena: 5.750 € (pri razstavljanju s strani kupca) 1x Bierrebi rezalni avtomat, vključno z mizo za pripravo rezil. Cena: 4.950 €

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, največja širina izdelka: 400 mm, vhodna napetost: 230 V, Minipack Pratika 80 MPS Gksdpfjyant Rjx Ahbed Minipack Pratika 80 MPS je popolnoma avtomatski pakirni stroj s stranskim varjenjem. Namenjen je izdelkom z največjo višino 360 mm in je primeren tudi za zelo dolge izdelke. – Popolnoma avtomatski stroj za pakiranje s stranskim varjenjem (neprekinjeno stransko varjenje) – Največja višina izdelka: 360 mm – Možne dolžine izdelkov nad 2 m – Uporaben dimenzija varilne letve: 700 mm – Največje dimenzije rolice folije: Ø 350 × 800 mm – Višina vstopnega traku: 915 mm – Dimenzije stroja (zaprt): 2.785 × 940 × 1.770 mm – Dimenzije stroja (odprt): 2.785 × 940 × 2.280 mm – Zmogljivost: do 3.000 paketov/h (odvisno od izdelka/folije)

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AN-No.: 88.04.017 D, 8 pieces of very clean (refurbished) Jakob Müller Frick AG NF42 looms from 1988, 1989, and 1990 from my inventory. The machines run flawlessly and are 100% operational (completely overhauled). 12 shafts, without magazine, with Mütrans, some with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Item No.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm, completely overhauled, from 1990 at €6,500 each Item No.: 90.01.704 B Item No.: 90.01.755 A Item No.: 90.01.229 A 1 unit NF 2/84mm, completely overhauled, from 1989 for €6,500 Item No.: 89.00.118 D 3 units NF 2/84mm, completely overhauled, from 1988 at €6,500 each Item No.: 88.04.244 A Item No.: 88.02.758 A Item No.: 88.02.758 B The machines come from a curtain tape production line and were originally equipped with a Z compartment. As part of the general overhaul, they have been converted to standard compartments. All tension trees and pressure rollers have been newly vulcanized by Westland. Card rollers in the chain box are new or newly vulcanized. The central lubrication system in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and are fitted with 12 shafts. All machines are fitted with Mütrans II. Individual machines with double-belt take-off (for heavy-duty fabrics) can be delivered upon request. I believe this is possible for 4-5 machines. Finely knurled tension trees can also be installed for 4-5 machines as an option. Godpfx Aor Ix Igohbekd All needle holders are suitable for double needles. Two additional Mütrans II units can be installed for this purpose upon request. The machines have been rebuilt from scratch. All bearings, shafts, and bushings have been inspected and replaced as necessary. All swing arms have been checked and replaced if required. Installed: - 1st shaft free (spacer block installed) - 2nd and 3rd shaft: swing arm 201 - 4th–6th shaft: swing arm 202 - 7th–9th shaft: swing arm 203 - 10th–12th shaft: swing arm 204 - 13th shaft: swing arm 205 All shaft springs have been checked and replaced where needed. There are no porous, cracked, or defective parts. The electrical system has been checked, the circuit board for thread monitoring has been inspected and, if required, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and undamaged. The machines are offered without Müdata. Four units are additionally equipped with crawler gears. The machines have been set up and tested. Note: Machines are supplied without oil, yarns, slats, reeds, needles, and chain links. Delivery on Euro pallet, FOB Wuppertal.

Leto izdelave: 2006, stanje: rabljeno, Submerged arc welding machine, welding accessories, forming gas welding equipment, longitudinal travel carriage, chassis, welding carriage, longitudinal welding carriage, welding automaton, welding tractor, shielding gas welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welder, Rail Runner - Submerged arc welding machine: without power source - Submerged arc welding machine type: Minisaf 02 - SUBARC 3 control box - Intermediate hose package - Accessories Gkjdpfxjd Nlf Ne Ahbod - Dimensions: 1200/800/H500 mm - Weight: 215 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna širina: 6.370 mm, skupna dolžina: 2.150 mm, skupna višina: 2.300 mm, skupna masa: 4.800 kg, 340 cm tiskalnik z lepljivim trakom, opremljen z 8 NOVIMI tiskalnimi glavami Kyocera, tiskalnik kot nov. V operativnem stanju. Gkjdpfx Ahexvb Ufebod

Stanje: rabljeno, Premer planske plošče 2500 mm Premer vrtenja 2700 mm Višina struženja 1600 mm Območje vrtljajev – rezkanje 1,18–32,5 vrt/min Območje vrtljajev – rezkanje 4,25–117 vrt/min Teža obdelovanca 10000 kg Vodoravno pomikanje bočnega suport 800 mm Vodoravno pomikanje glave suport pod 45 stopinjami – 1000 mm Vodoravno pomikanje glave suport pod 30 stopinjami – 1000 mm Skupna potrebna moč 80 kW Tehnični podatki so podatki proizvajalca oziroma upravljavca, zato niso zavezujoči za nas. Pridružujemo si pravico do vmesne prodaje; veljajo izključno naši poslovni in prodajni pogoji. Gjdpeyuqidjfx Ahbokd O nas: Več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, zmogljivost dvigal do 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaš obrat, nas kontaktirajte. Ostale ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch

Stanje: novo, Leto izdelave: 2025, Laser power: 6000 watts Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x 20 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Max. positioning accuracy U axis: 0.05/1000 mm Max. mild steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm Max. tube weight: 1200 kg Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Gedpoxgc Arefx Ahbjkd Standard equipment Working range for tube diameter Round tube: 20 mm - 350 mm Square tube: 20 - 350 mm Rectangular tube: 20 x 20 mm - 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9100 mm Z-axis travel: 4000 mm X-axis travel: 400 mm Maximum loading length: 9200 mm Maximum unloading length: 6000 mm X,Y axis positioning accuracy: +/-0.05 mm/1000 mm X,Y axis repeat positioning accuracy: +/-0.05 mm/1000 mm Maximum rotational U-axis positioning speed: 100 RPM Maximum acceleration X/Y axis: 1.0 G X-axis rapid traverse speed: ≤50 m/min Maximum loading capacity per tube: ≤133 kg/m Machine operating temperature: 20℃–40℃

Stanje: rabljeno, Leto izdelave: 1995, Stroj za ploščno brušenje Proizvajalec: Jung Tip: JA 500 CNC-C Letnik izdelave: 1995 Popravljen: 2003 Dolžina brušenja: 500 mm Širina brušenja: 200 mm Maksimalna višina obdelovanca: 250 mm Dimenzije mize X/Y: 600 mm / 200 mm Gsdpfxjwp E Rgs Ahbokd Premer brusilnega diska: 225 mm Širina brusilnega diska: 25 mm Premer luknje brusilnega diska: 51 mm Število vrtljajev: 4.200 vrt/min Masa stroja: približno 2.500 kg 121126