Motan dryair tank (art.2257)

Motan LBA 300 (art.2257)

Stanje: rabljeno, Leto izdelave: 1979, X-hod 800 mm Dodjwwwqhopfx Aa Hjwf Y-hod 300 mm Z-hod 400 mm Območje vrtljajev 25 - 2.000 min^-1 Pogonska moč 4 kW Pomik 5 - 500 mm/min Hitri pomik 1,5 m/min Delovna miza: 1.000 x 700 mm Vpenjalni stožec SK40 Teža 1,8 t Prostorske zahteve cca 2,50 x 2,40 x 2,00 m Stroj je v dobrem stanju Digitalni prikaz je pokvarjen (merilni trakovi delujejo) Izmenljiva rezkalna glava Brez dodatne opreme

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Travel X/Y/Z: 630mm/530mm/465mm, Tool holder: SK40, Spindle speed: 12,000 rpm, Tool stations: 32, Table size X/Y/Z: 920mm/540mm, Machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, Weight: approx. 6,500kg. Documentation available. On-site inspection is possible. Dwodpfx Aswm Nphsa Hof

Stanje: rabljeno, Leto izdelave: 2016, Travel distance - X: 800 mm Travel distance - Y: 450 mm Travel distance - Z: 510 mm Control: HEIDENHAIN TNC620 Table dimensions (L x W): 1,000 x 450 mm Number of tool changer positions: 30 Vertical machining center | DOOSAN DNM 4500 equipped with 30-position tool changer, through-spindle coolant system (IKZ), and chip conveyor. The machine has only 5,365 spindle hours. The machine is in well-maintained condition. A video of the machine at its current location is available upon request. Technical data of the machine will follow shortly. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dwjdpfxjwq S Ale Aa Hef #Tags: DNM4500 | DNM-4500

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stock No. 2587k 1 used pelletizing line, function-tested, Throughput up to approx. 600 kg/h depending on material, consisting of: - 1 volumetric dosing unit - Extruder Plastmachines type PME 100 Single screw Ø 100 mm – 35 L/D ratio Drive 134 kW – DC motor - 1x degassing zone Dodpfx Astvfhcsa Howf - Melt filter BKG type K-SWE 121 RS – back flushable incl. Hydraulics 3 kW - Strand die head with 20 holes x Ø 3.5 mm - Strand cooling trough 400 x 4000 mm with strand guide rollers - Strand suction unit - Strand pelletizer SG 3000 - ResoTec control / switch cabinet Inspection by appointment – short notice possible Further pelletizing lines / extruders available & ready for demonstration at our Wuppertal facility

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Travels (X, Y, Z) 742 x 435 x 510 mm Number of spindles, vertical drilling head / pcs Number of spindles, horizontal drilling head / pcs The DOOSAN DNM 400 is a vertical CNC machining center designed for precise milling operations in metalworking. It is particularly suitable for small to medium-sized workpieces and offers a robust combination of performance, accuracy, and reliability. All technical documentation for the machine is available and included. Including accessories. Control: HEIDENHAIN iTNC 530 Travel: X-axis: 742 mm Y-axis: 435 mm Dwodpfx Aajwmxfle Hsf Z-axis: 510 mm Rapid traverse: X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Maximum feed rate: 1~15,000 mm/min Ball screw (diameter × pitch): X-axis: 40 x P12 mm Y-axis: 40 x P12 mm Z-axis: 40 x P10 mm Accuracy: Positioning accuracy: ±0.005 mm over the full travel Repeatability: ±0.002 mm Table size: 920 x 435 mm Min./max. spindle nose to table: 150~660 mm Maximum table load: 600 kgf Table surface configuration: 4-125 x 15H8 Maximum workpiece height: 465 mm Machine weight: 5,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Lot de 36 grues à colonne Capacité de levage de 500 kg à 2 000 kg Dedpel R Izbofx Aa Hewf Prix : 89 000 €

Leto izdelave: 2004, Stanje: delavnici obnovljeno (rabljeno), No. 2054 1 used, partially overhauled and function-tested Alphatec Extruder, type AE-S 75.28 Dwodpfxsiyx Uze Aa Hsf Screw diameter: 75 mm, 28 L/D Drive: 75 kW AC Screw speed up to 80 rpm, adjustable 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Inspection possible at our plant in Wuppertal. Further extruders available.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: BT40 - Spindle drive power: 24/32 [kW] - Spindle speed: 12,000 [rpm] - Spindle hours: 9,122 [h] LINEAR AXES - Travel X/Y/Z axes: 650/765/520 [mm] - Rapid traverse speed (X/Y/Z): 40/40/36 [m/min] - Feed rate (X/Y/Z): 18/18/18 [m/min] SWIVEL AXIS A - Travel: 150 [degrees] (+/-) - Rapid traverse speed: 20 [rpm] - Feed rate: 7,200 [mm/min] SWIVEL AXIS B - Travel: 360 [degrees] (+/-) - Minimum resolution: 0.001 [degrees] - Rapid traverse speed: 30 [rpm] - Feed rate: 7,200 [mm/min] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 120 - Tool change time: 1 [sec] TABLE Dodpfxsuhbz Uj Aa Hewf - Table size: 500 x 500 [mm] - Max. table load: 500 [kg] - Distance from table to spindle nose: 160/680 [mm] PALLET CHANGER - Pallet size: 500 x 500 [mm] - Number of pallets: 2 - Pallet change time: 30 [sec] ELECTRICAL SUPPLY - Total power consumption: 54 [kW] MACHINE HOURS - Power-on hours: 24,226 [h] - Operating hours: 9,122 [h] EQUIPMENT - Control: Heidenhain TNC530 - Interface: RS232 / USB / PCMCIA - Electronic hand wheel - 3-color status lamp - Coolant tank * with high-pressure pump: 20 [bar] - Through spindle coolant (IKZ) - Chip conveyor - Spindle cooling - Tool measurement probe: Renishaw - Electrical transformer

Leto izdelave: 2022, obratovalne ure: 108 h, Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: SN2120, EDM312MF30-SLM (second-life machine) Technical Data: Travel distances: 450x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance table/electrode holder: 150/450mm Max. workpiece weight: 800kg Max. dielectric fluid: 700l Dimensions (W x D x H): 2700x1800x2350mm Machine weight: 2500kg Power supply: 3/N/PE 400/230V 50Hz Dwjdpfxjhtrdys Aa Hof Connected load: 6.7 KVA Equipment: Color: newly painted in light grey + tele grey New control cabinet New APC910/2 controller (Win10) MF30 V2.8 operating interface New B&R drives with Endat interface Touch screen display Exopuls+ 60A generator Rev.4 5-position tool changer (WZW) Contact protection operable via push button Linear scales on all axes X, Y, Z (Fagor) 2 cartridge filters Termogamma cooling unit Completely new machine wiring New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve terminal CO² extinguishing system C-axis Hirschmann 50 rpm, holding brake overhauled Handheld control panel with enabling switch Automatic lowering tank Clamping chucks: Erowa IST, Hirschmann, 3R 12 months warranty Transport On-site commissioning Training

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: Dodpst Hxamjfx Aa Hjwf • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice