Center CNC za struženje in rezkanje

Mori Seiki NTX 2000 SZ 1500

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 346 h, število osi: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and a rapid traverse rate of 24 m/min on the X-axis. If you are looking for high-quality turning and milling capabilities, the Hurco CNC TMX 8 MYSi turning-milling center should be considered. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max. turning diameter: 508 mm • Max. turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Max. main spindle speed: 4,500 rpm • Max. sub-spindle speed: 6,000 rpm • Synchronizing spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar pass-through: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Maximum motor current: 32 A • Full load: 58 kVA • Full load current: 83 A Tsdpfoym T Itex Aqteb • Short-circuit resistance: 5 kA RMS symmetric • Interruption capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included; swiveling holders are not included.

Stanje: rabljeno, Leto izdelave: 1994, Cutting diameter: 520 mm Bandsaw blade length: 7239 mm Cutting width: 1.3 mm Controller: POSIMOD Cutting area (square): 520 x 520 mm Feed length: 500 mm Multiple feed length: 4500 mm Minimum cut-off length: 6 mm Remnant piece length min./max.: 10 / 100 mm Cutting speed: 20 - 130 m/min Bandsaw blade dimensions: 7239 x 50 x 1.3 mm Tsdewm Rm Iepfx Aqtjb Saw motor: 5.5 kW Total power requirement: 10.0 kW Machine weight: approx. 3.8 t Machine dimensions (L x W x H): 3.42 x 2.30 x 2.40 m - 2-column guided - Accessories: 2500 mm infeed roller conveyor, chip conveyor, coolant system

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 760 mm, premer struženja nad prečnim suportom: 630 mm, premer struženja: 376 mm, moč vretenovega motorja: 18 W, hitrost vretena (min.): 40 obr/min, največja hitrost vretena: 4.000 obr/min, izvrtina vretena: 81 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 110 mm, pomik po osi Z: 830 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 10 m/min, hitri pomik na osi Z: 30 m/min, vrsta vhodnega toka: trifazni, prehod palice: 81 mm, skupna višina: 2.170 mm, skupna dolžina: 4.400 mm, skupna širina: 2.100 mm, skupna masa: 6.650 kg, premer vretena: 254 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Uporabljen CNC stružni stroj s 6 osmi, s protivretenom, motoriziranimi orodji, osjo Y in CNC krmilnikom FANUC 0i-TF PLUS. Tedpszrmiasfx Aqtsb

Stanje: dober (rabljeno), Leto izdelave: 2008, Univerzalni obdelovalni center Tip stroja: DMG DMU 60 monoblock Krmilnik: Heidenhain iTNC 530 Leto izdelave: 2008 Na voljo od: takoj / now TEHNIČNI PODATKI Pomiki X-os: 730 mm Y-os: 560 mm Z-os: 560 mm B-os: ° C-os: 0,001° Število krmiljenih osi: 5 Območje vrtljajev: 12.000 vrt/min Vpenjalo orodja: SK 40 Menjalnik orodij Število orodnih mest: 60 Tedpfxeziy Iqs Aqtsb NC rotacijska miza: Ø 600 Dimenzija mize: 1.000 x 600 mm Maks. obremenitev mize: 500 kg Oprema Transporter za ostružke Notranje hlajenje (IKZ): bar Papirni tračni filter Merilna sonda: Heidenhain TS 649 Roto Clear Merjenje orodij Pištola za spiranje ostružkov Odsesavanje oljne megle Način delovanja: 4

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 700 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 600 mm, MCOSMOS z modulom GEOPAK (CAD-podprta analiza). Programska oprema - MCOSMOS 3 CNC V4. Oprema: merilna glava PH10MQ (vključno z nosilcem za hitro menjavo FCR25). Merilni sistem za skeniranje SP25M s kompletom 5 sondnih modulov. MCOSMOS 3 CNC V4, vključno z donglom (Wibu-Box). CAT1000PS V4 (CAD-primerjava in analiza). Nadgradnja programske opreme MCOSMOS-1 z V2 na V4. Dodatni modul GEO-EDM za erodirane dele. Generator programov za dele in GEO-EDM asistent. Tedpfox H Nn Rox Aqteb

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, višina struženja: 1.400 mm, teža obdelovanca (maks.): 8.000 kg, premer struženja: 1.600 mm, premer čelne plošče: 1.250 mm, skupna višina: 5.190 mm, skupna širina: 4.875 mm, skupna dolžina: 3.885 mm, največja hitrost vrtenja: 360 obr/min, vrtilni moment: 17.880 Nm, obremenitev mize: 8.000 kg, skupna masa: 30.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Vertical carousel turning machine in flat-guided design with comprehensive full equipment: WITH MILLING FUNCTION - Milling spindle 2000 rpm, SK50, 22 kW Tsdpfx Ajvtzc Ieqtob - C-axis with 0.001° resolution - Complete enclosure - Chip conveyor - Internal coolant supply - Fanuc control system - 24 tool stations - 12 milling tools - Manual Guide I - Toolholder package - Electronic handwheel - Signal light - Manual 3-jaw chuck, 1250 mm - Tool measuring system Renishaw - Workpiece measuring system Renishaw - Glass linear scales on X and Z axes - 24 months warranty

Stanje: dober (rabljeno), Maximum bar capacity: 36 mm Maximum spindle speed: 6,300 rpm Todpfstrvzxsx Aqtsb Number of spindles: 2 Control system: Traub TX8i Tool carrier 1: Number of tools: 12 X-axis travel: 50 mm Z-axis travel: 50 mm Front tool carrier: Number of tools: 7 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Rear tool carrier: Number of tools: 5 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Commissioning: As Okuma stock machine 09.2017 Controller: OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Spindle bore Ø 112 mm Motor power 32kW Torque 955Nm ▪ Hollow clamping cylinder Ø 127mm SMW VNK 320-127 with bore Ø 127mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° Todpfxoyviigj Aqtob ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance, self-cleaning function ▪ Drum-type sump filter TMF300 with clean tank 980l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on lower turret (not possible in combination with driven tools for the lower turret) ▪ Door automation ▪ Robot interface Type E for connecting additional loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22kW / 700 Nm / 50-4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 steps Range switching at full speed ▪ Lower turret: 12 stations With cylindrical roller guide in ZB-axis With slideway in XB-axis ▪ Collision Avoidance System (CAS) in real time ▪ 19" Color LCD TFT (1280x1024) with 3D color graphics as touch screen/panel with vertical monitor and tilt-adjustable keyboard ▪ Second operating system Windows 7 for operation and open, unrestricted use for Windows 7-compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° ▪ Y-axis with stroke +150 / -150 = 300mm ▪ B-axis 240° Positioning in 0.001° ▪ Tool spindle (Okuma motor spindle): 22kW / 120Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. 20bar pressure Including bag filter, external cooling for tool spindle, pump with max. 3bar pressure ▪ Tooling system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement device (when using standard chuck) for secure setup ▪ Machine management MacMan with integrated BDE (machine data collection) ▪ Part program storage 2 GB ▪ Max. length of individual part program 2 MB ▪ 2 USB 2.0 interfaces ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation by periodic speed variation ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection function) ▪ Coordinate transformation (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Stanje: rabljeno, Leto izdelave: 2010, Technical Details: X-axis travel: 800 mm y-axis travel: 685 mm z-axis travel: 630 mm C-axis: 360° (faceplate table) Control system: Siemens 840D Power Line Spindle speed: 10,500 – 20,000 rpm Spindle torque: 180 Nm Tool holder: HSK-A63, DIN 69893 Tool magazine with: 40 positions Number of tables: 2 Table swivel range +/-: 120° each (A-axis) Table clamping surface: 280 x 275 mm Table load capacity: 320 kg Interface: RS232 Spindle operating hours: 38,700 h Total power requirement: 37 kW Todpfxoytcf Uo Aqtjb Machine dimensions approx. LxWxH: 4.0 x 4.4 x 3.0 m Chip conveyor dimensions LxWxH: 2.1 x 1.05 x 1.5 m Coolant system dimensions LxWxH: 1.3 x 1.6 x 1.95 m CNC machining center – 5-axis machining center Clamping table for 4th and 5th axis (swivel ±120° left/right, swivel speed 50 rpm, and rotary table with faceplate Ø 280 mm/200 rpm) Max. workpiece size 940 x 650 mm for/on table with Knoll chip conveyor, model 750 K-1/150; year of manufacture 2009 Coolant system Bürener with paper belt filter, belt width 700 mm; year of manufacture 2009 Both control cabinets equipped with Rittal cooling units Various accessories such as different clamping fixtures by HILMA and Chick, etc., can be offered separately. i.D. *

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Na voljo je vertikalni visokozmogljiv rezkalni in navojni obdelovalni center DMG Mori. Pomik X/Y/Z: 700mm/420mm/380mm, največje dimenzije obdelovanca X/Y: 880mm/550mm, dimenzije mize X/Y: 840mm/420mm, največja obremenitev mize: 400kg, hitrost vretena: 10000 vrt/min, moč vretena: 25kW, navor: 45Nm, število orodij: 15, vpenjalno mesto orodja: BT30, hitro pomikanje: 60m/min, podajalna sila: 5kN. Dimenzije stroja X/Y/Z: pribl. 1650mm/2350mm/2500mm, masa: pribl. 4000kg, krmiljenje: Siemens Sinumerik 840D Solutionline, delovne ure stroja: 28892h, ure vretena: 12674h. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Todjynlu Uepfx Aqtsb