Horizontalni strojni center

Mori Seiki NH4000 DCG

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 37.165 h, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 630 mm, hitro pomikanje X-os: 50 m/min, proizvajalec krmilnikov: FS-18IMB (MAPPS 2), višina obdelovanca (maks.): 800 mm, premer obdelovanca (maks.): 560 mm, teža obdelovanca (maks.): 300 kg, širina mize: 400 mm, višina mize: 400 mm, dolžina mize: 400 mm, hitrost vretena (min.): 14.000 obr/min, dolžina orodja: 400 mm, teža orodja: 8.000 g, CNC Control: FS-18IMB (MAPPS 2) Axes Travel X-axis mm: 560 Travel Y-axis mm: 560 Travel Z-axis mm: 630 Rapid traverse m/min: 50 Rotary Worktable (4th axis): FULL 4TH AXIS ROTARY TABLE Worktable Number of pallets: 3 Pallet dimensions mm: 400 Max. workpiece size (D x H) mm: 560 x 800 Max. workpiece weight kg: 300 Pallet change time sec: 6 Spindle Max. spindle speed rpm: 14,000 Spindle drive power kW: 18.5/11 kW Spindle torque Nm: 120 Nm (10% duty cycle) Tool system Tool holder: BT-40 Number of tools in magazine: 120 With empty adjacent pockets mm: 140 With full adjacent pockets mm: 70 Max. tool length mm: 400 Max. tool weight kg: 8 Tool-to-tool time s: 0.9 Chip-to-chip time sec: 2.8 Equipment Chip conveyor Signal light 4th axis Prepared for internal cooling (40/80 bar) RENISHAW OMP60 CE compliant Round pallet storage Measuring system (worktable) Cooling Tank capacity liters: 500 High-pressure cooling bar: 70 Fodpfx Aswx Itvjf Soga Machine operating hours: Power-on hours: 135,042 Total power requirement kVA: 32.8 Operating hours: 37,165 Basic machine: Dimensions / Weight Length mm: 4,004 Width mm: 2,397 Height mm: 2,711 Weight kg: 9,600

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigeration dryers, and a Beko oil-water separator, also by Atlas Copco, is available. 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. Fsdpfsxdc Uvjx Af Soga 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant amount: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control scope: 2-6 compressors. 5) Oil-water separator Beko ÖWAMAT 15, throughput capacity: 6m³-30m³/min, oil outlet: DN40, tank volume: 115.5l, operating volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. Total system hours: 8,656h, controller hours: 42,334h. Documentation available. On-site inspection possible.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 630 mm, skupna masa: 9.950 kg, največja hitrost vretena: 14.000 obr/min, število osi: 4, Ta štiri-osni MORI SEIKI NH4000 DCG je bil izdelan leta 2013. Ima impresivne hode približno 560 mm v X- in Y-osi ter 630 mm v Z-osi. Stroj doseže največjo hitrost vretena približno 14.000 min⁻¹ in tehta skupaj z vrtljivo mizo približno 10.000 kg. Če iščete visokokakovostne možnosti obdelave, razmislite o vodoravnem obdelovalnem centru MORI SEIKI NH4000 DCG, ki je na voljo za prodajo. Kontaktirajte nas za dodatne informacije. • Električni priklop: 200 V / 3 faze / 50 Hz • Krmiljenje: MORI SEIKI Dodatna oprema Fgedpfx Afeyw Rh Ts Ssa • CONSEP transportni trak za odrezke • KNOLL filtrirna naprava za hladilno tekočino, model FKA/500/KF110 (2013)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 630 mm, skupna masa: 9.950 kg, največja hitrost vretena: 14.000 obr/min, število osi: 4, Ta štiriosna MORI SEIKI NH4000 DCG je bila izdelana leta 2012. Ima impresivne pomike približno 560 mm v osi X in Y ter 630 mm v osi Z. Stroj doseže maksimalno hitrost približno 14.000 vrt/min in je opremljen z vrtljivo mizo, transportnim trakom za ostružke CONSEP in filtrom za hladilno tekočino KNOLL. Če iščete visokokakovostne možnosti obdelave, razmislite o horizontalnem obdelovalnem centru MORI SEIKI NH4000 DCG, ki ga imamo v prodaji. Za dodatne podrobnosti nas kontaktirajte. • Priključne specifikacije: 200V / 3 faze / 50Hz • Z vrtljivo mizo • Krmiljenje: MORI SEIKI Dodatna oprema Fedpoyw N R Hsfx Af Soga • Transportni trak za ostružke CONSEP • Sistem filtracije hladilne tekočine KNOLL FKA/500/KF110 (2012)

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Fodpfx Afohzbips Sjga Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 630 mm, obremenitev mize: 400 kg, skupna masa: 10.000 kg, največja hitrost vretena: 14.000 obr/min, število osi: 4, This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2011. It features impressive travel distances of approximately 560 mm on both the X and Y axes and 630 mm on the Z axis. The machine offers a maximum spindle speed of 14,000 rpm and a robust table size of 400 x 400 mm, with a maximum table load capacity of 400 kg. If you are looking for high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining center we have for sale. Contact us for further details. • Available units: 2 • CNC horizontal machining center (Mori 1) MORI SEIKI NH4000 DCG • Power connection specifications: 200V / 3-phase / 50Hz • Table dimensions (W x D): approx. 40 x 40 cm • Control: MORI SEIKI • Approx. 10,000 kg • Horizontal CNC machining center (Mori 2) MORI SEIKI NH4000 DCG • Operating hours: 22,031 • Power supply: 200V / 3-phase / 50Hz • Control: MORI SEIKI • Approx. 9,950 kg Fsdoyw N I Sepfx Af Sjga Additional equipment: • Mori 1 • CONSEP chip conveyor • KNOLL FKA/500/KF110 coolant filtration system (2011) • Mori 2 • CONSEP chip conveyor • KNOLL FKA/500/KF110 coolant filtration system (2011)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Pomik osi: 560x560x620 mm Fjdpsnyh R Tefx Af Ssga Krmilni sistem MSX-501 Stroj je na zalogi v našem skladišču v Bolgariji. V NAŠI ZALOGI IMAO: *Horizontalni obdelovalni centri *CNC stružnice z 2 osi *CNC stružnice z 2 osi + os C *CNC stružnice z 2 osi + os C + os Y *CNC rezkanje za navoje *CNC vertikalni obdelovalni centri 100% lastništvo +50 CNC strojev na zalogi! Za dodatne informacije nas kontaktirajte. CNC World Machine LTD

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, mazak j-200s technical data The Mazak INTEGREX j-200S is a compact 5-axis multitasking machine with sub-spindle (S) designed for complex turning and milling operations. Key features include an 8-inch main chuck, a maximum machining diameter of {Ø500 mm}, and a machining length of up to {910 mm}. The B-axis offers a swivel range from {-30°} to {+190°}. Main technical data (Integrex j-200S): Machining capacity: - Max. swing diameter: {530 mm} - Max. machining diameter: {Ø500 mm} - Max. machining length: {910 mm} Main spindle & sub-spindle: - Chuck size (main & sub-spindle): 8 inches Fgjdsyfgdlspfx Af Ssa - Main spindle speed: {5,000 min⁻¹} - Main spindle power (40% duty cycle): {18.5 kW} Milling spindle (B-axis): - Speed: {12,000 min⁻¹} (typical for j-series, partially optional values) - Swivel range: {-30°} to {+190°} (i.e. 220° total range) - Tool interface: KM63 or CAPTO C6 Axes & capacity: - Y-axis stroke: {200 mm} ({±100 mm}) - X/Z axes: {450 mm} / {1119 mm} - Tool magazine: 20–36 tools (depending on configuration) Control: MAZATROL SmoothG or Matrix Nexus 2 The machine features full C-axis capability for both spindles and an automatic tool changer, making it ideal for highly productive applications in a compact design.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, CNC Control: F31iA X axis travel (mm): 560 Y axis travel (mm): 560 Z axis travel (mm): 630 B axis (degrees): 360.000 Table load capacity (kg): 400 Feed rate (X/Y/Z, mm/min): 50,000 Maximum rapid traverse (X/Y/Z, m/min): 50 Fsdpfx Afeyhlqpe Ssga Spindle speed (rpm): 14,000 Spindle power (kW): 18.5 Taper type: BT-40 Torque (Nm): 120 Tool changer type: Tool magazine positions: 60 Max. tool diameter (mm): 70 Max. tool diameter with adjacent positions empty (mm): 140 Max. tool length (mm): 400 Max. tool weight (kg): 8 Coolant tank capacity (l): 500 Through-spindle coolant pressure (bar): 70 EQUIPMENT Chip conveyor Through-spindle coolant with high-pressure pump, 70 bar Tool breakage detection probe Renishaw spindle measuring system Extended tool offsets: Up to 400 offsets Additional coordinate systems: 48 Workpiece coordinate systems Tool life management Expanded program memory: Total length 1,280 m (512 KB) Up to 1,000 storable programs Preparation for NH4000 8CPP + 8 Pallets

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 17.691 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 630 mm, premer obdelovanca (maks.): 630 mm, teža obdelovanca (maks.): 400 kg, TECHNICAL DETAILS Travel Paths & Axes X-Axis travel: 560 mm Y-Axis travel: 560 mm Z-Axis travel: 630 mm B-Axis max. rotational speed: 44.4 rpm Rapid Traverse X-Axis rapid traverse: 50 m/min Y-Axis rapid traverse: 50 m/min Z-Axis rapid traverse: 50 m/min Workpiece Dimensions Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece weight: 400 kg Spindle & Tools Max. spindle speed: 14,000 rpm Distance spindle center to pallet top surface: 80-640 mm Distance spindle nose to pallet center: 100-730 mm Tool magazine: 60 positions Tool change time: 0.9 s Tool holder: BT 40 Pallets Pallet dimensions: 400 x 400 mm Number of pallets: 2 Pallet change time: 6 s Feed Rate X-Axis feed speed: 50,000 mm/min Y-Axis feed speed: 50,000 mm/min Z-Axis feed speed: 50,000 mm/min Fjdpexvzt Iofx Af Soga Work Table Table width: 400 mm Table length: 400 mm Table load capacity: 400 kg MACHINE DETAILS Control model: MSX-701IV Power consumption: 32.8 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,600 mm Total weight: 9,800 kg Operating Hours Power-on hours: 46,259 h Operating hours: 26,725 h Machining hours: 17,691 h

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed speed (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY Fgodpfx Aew Ephbef Ssa - Supply voltage: 400 [V] - Total connected load: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Through-spindle coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling - Tool measurement probe - Workpiece measurement probe: Renishaw RMP60 - Tool breakage control: SOFT AC - Number of pallets: 2 - Machine vice - Tool holder

Stanje: rabljeno, Leto izdelave: 2007, x-axis travel: 560 mm y-axis travel: 560 mm z-axis travel: 630 mm Control: MSX 701 III MAPPS Max. spindle speed: 14,000 rpm Main spindle drive power: 18.5 / 11 kW Max. torque: 120 Nm Tool holder: MAS BT 40 Distance from spindle center to table: 80 - 640 mm Distance from spindle nose to table center: 100 - 730 mm Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Pallet change time: 6.0 sec B-axis: 0.001° Number of tool stations: 60 Tool holder: MAS BT 40 Fsdpfxswbi Ade Af Soga Max. tool diameter: 70 / (140) mm Max. tool length: 400 mm Max. tool weight: 8.0 kg Rapid traverse (X / Y / Z): 50 m/min Feed rate: 0 - 50,000 mm/min Feed rate in inching mode: 0 - 1,260 mm/min Total power requirement: 35 kVA Machine weight approx.: 9.8 t Space requirement approx.: 5.5 x 3.5 x 2.8 m CNC Horizontal Machining Centre MORI SEIKI - NH 4000 DCG - Pallet changer - Control options: Program restart, cylindrical and spiral interpolation High-speed milling cycles, island and pocket milling cycles