CNC stružnica

Mori Seiki CL 253 B

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 9.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 1.000 mm, FREZALNI / VRTALNI STROJ S PREMIČNO KOLOMNO CME TEHNIČNE LASTNOSTI CME - MOŽEN OGLED V OBRATOVANJU Nodsu R Rk Hspfx Adpjwp Znamka: CME Model: MB 9000 Leto: 2007 CNC: Siemens Sinumerik 840D Os X: 9000 mm Os Y (vertikalno): 4000 mm Os Z: 1000 mm Os W (Ø 150 mm): 700 mm 2 rotacijsko-translacijski mizi (Linearna pot: 2000 mm) 2500 x 2500 mm, nosilnost 25 t Heidenhain optične letev na vseh oseh Neposredna glava Zamenjava orodja, 90 mest ZF menjalnik Notranje hlajenje Odvzemanje ostružkov

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed * Nsdpfxev A Sqho Adpewp

Stanje: dober (rabljeno), Leto izdelave: 2007, Stroj je v dobrem stanju, Nwodpfewk Nm Isx Adpep Ročno prikazani deli niso priloženi. SK 40, 24 mest za orodja v menjalcu orodij. 10.000 min⁻¹

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.230 mm, pomik osi Y: 2.700 mm, pomik po osi Z: 700 mm, hitro pomikanje X-os: 12 m/min, hitri pomik os Y: 12 m/min, hitri pomik na osi Z: 12 m/min, hitrost pomika os X: 12 m/min, hitrost podajanja osi Y: 12 m/min, hitrost podajanja os Z: 12 m/min, širina mize: 2.400 mm, dolžina mize: 4.000 mm, obremenitev mize: 14.000 kg, skupna masa: 38.500 kg, hitrost vretena (min.): 5.200 obr/min, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Travel range X-axis: 4,230 mm Travel range Y-axis: 2,700 mm Travel range Z-axis: 700 mm Feed rate X-axis: 12 m/min Feed rate Y-axis: 12 m/min Feed rate Z-axis: 12 m/min Nedpfjvt S Eajx Adpjwp Table length: 4,000 mm Table width: 2,400 mm Spindle speed (min.): 5,200 rpm Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Distance between columns: 2,800 mm Table load capacity: 14,000 kg Spindle position: Vertical Max. workpiece weight: 14,000 kg Total weight: 38,500 kg Equipment: - Infinitely variable speed adjustment - Chip conveyor - Internal coolant supply - Tool magazine for 40 tools - Tool holder SK 50 - Heidenhain TNC 530 control Subject to errors in technical data. The scope of accessories is defined exclusively and within the framework of the written item description. There is expressly no entitlement to any additionally illustrated accessories, e.g. for demonstration purposes. Machine is sold as seen, without warranty or guarantee. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Swing diameter: 420 mm, turning length: 820 mm, spindle bore: 105 mm, spindle speed: 3,000 rpm, spindle power: 22 kW, X/Z travel: 280 mm / 820 mm, tool stations: 10, driven tool speed: 6,000 rpm. Machine dimensions (X/Y/Z): approx. 4,400 mm / 2,100 mm / 2,300 mm, weight: approx. 6,000 kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10,000 h. Includes various accessories. The driven tools have never been used, only the Y-axis has been operated. The measuring arm and ball screw of the Y-axis are as new. Documentation available. On-site inspection is possible. Nwodev I U Iyspfx Adpjp

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Travel range X/Y/Z: 835mm/510mm/510mm, spindle speed: 12,000 rpm, spindle power: 14 kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800 kg, max. workpiece height: 720 mm. Tool stations: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30 m/min, feed rate: 20 m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112,962h, spindle hours: 30,702h. Includes chip conveyor, internal coolant supply, linear measuring system. Documentation available. An on-site inspection is possible. Nwodov H Dgpspfx Adpsp

Stanje: dober (rabljeno), Leto izdelave: 2002, številka stroja/vozila: 120K587, Good day, We are offering for sale a well-maintained Quaser MV204II universal CNC milling machine with HEIDENHAIN control at an unbeatable price-performance ratio. The purchase price includes: tool changer, touch probe, chip conveyor, coolant system, hydraulic system, documentation / machine manuals, etc. Machine dimensions: Height: 2,825 mm Width: 2,650 mm Length: 2,200 mm Weight: 7,500 kg Travel distances: X-axis travel: 1,020 mm (feed rate 32,000 mm/min) Y-axis travel: 600 mm (feed rate 32,000 mm/min) Nsdepfawhjpfx Adpswp Z-axis travel: 560 mm (feed rate 32,000 mm/min) Milling table data: Table size: 635 x 1,200 mm Table load capacity: 1,000 kg Table configuration: 6 x 18 mm (width), H8 T-slots Spindle data: Maximum spindle speed: 7,500 / 10,300 rpm Maximum spindle torque: 252 Nm All further data available upon request! Short-term viewing appointments possible. Best regards

Stanje: dober (rabljeno), Leto izdelave: 2003, potovalna razdalja osi X: 3.900 mm, pomik osi Y: 920 mm, pomik po osi Z: 820 mm, hitro pomikanje X-os: 100.000 m/min, hitri pomik os Y: 60.000 m/min, hitri pomik na osi Z: 60.000 m/min, teža obdelovanca (maks.): 2.200 kg, širina mize: 900 mm, dolžina mize: 4.200 mm, 5-osni obdelovalni center DECKEL MAHO - DMF 360 Linear Vreteno HSK-A63 Nihajni zaslon Proizvodni paket IKZ 40 bar Kapaciteta filtra: 23 l/min Rezervoar za hladilno tekočino: 900 l Zadnje DMG popravilo v letu 2023 za 11.000 EUR X-os: 3900 mm Y-os: 920 mm Z-os: 820 mm B-os: 108° Dolžina mize: 4200 mm Širina mize: 900 mm Obremenitev mize: 2200 kg Pomik X-osi: 100.000 mm/min Pomik Y-osi: 60.000 mm/min Pomik Z-osi: 60.000 mm/min Nwjdpfjw Rdyhox Adpep Vpenjalo orodja: 63 ISO/BT/MK Moč vretena: 35 kW Število obratov: 18.000 min⁻¹ Menjalnik orodij: 30 pozicij IKZ: 40 bar Število krmiljenih osi: 3+1 Transportni trak za odrezke: Da Hladilna naprava: Da Dolžina: 8.500 mm Širina: 3.450 mm Višina: 2.910 mm Teža: 30.700 kg

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 780 mm, premer struženja: 270 mm, moč vretenovega motorja: 15 W, potovalna razdalja osi X: 195 mm, pomik osi Y: 120 mm, pomik po osi Z: 780 mm, CNC Lathe Nakamura-Tome WT-300 Year of manufacture: 2006 CNC Control: FANUC Series 18i-TB Machine weight: 12,000 kg Machine dimensions: Length: 5,230 mm Width: 2,500 mm Height: 2,300 mm Machining capacity: Max swing diameter on upper/lower turret: Ø 310 mm (both upper and lower) Distance between spindles (min - max): 120 mm – 1,200 mm Max turning diameter main spindle / sub-spindle: Ø 270 mm Max turning length: 780 mm Bar capacity main spindle / sub-spindle: Ø 65 mm Axis travels: Axis X1 / X2: 195 mm Axis Y: 120 mm (±60 mm) Axis Z1 / Z2: 780 mm Axis B: 850 mm Axis C: 360° (continuous) Main spindle and sub-spindle: Spindle speed: 50 – 4,500 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 225 mm Minimum programmable C-axis increment: 0.001° Spindle motor power (cont./30 min): 11/15 kW (both spindles) Turret No.1 & No.2 (identical): Tool positions (static / driven): 24 positions (12 driven) Driven tool speed: 3,600 rpm Driven tool motor power: 3.7 / 5.5 kW Turning / boring tool dimensions: 25×25 mm / Ø 32 mm Rapid traverses: Axis X1 / X2 / Y: 16,000 mm/min Axis Z1 / Z2: 24,000 mm/min Axis B: 36,000 mm/min Axis C: 100 rpm Axis B: 27,000 mm/min Included accessories: LNS MOVE bar feeder (2,300 mm length capacity) Chip conveyor Coolant collection tank with wash pump High-pressure pump with external coolant tank Nwsdpfewx Hicox Adpep Various fixed and driven toolholders Tool presetting arm with dual RENISHAW probe heads Part unloading arm Manuals, electrical diagrams and CE Declaration

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.600 mm, moč vretenovega motorja: 45 W, največja hitrost vretena: 1.500 obr/min, potovalna razdalja osi X: 1.200 mm, pomik po osi Z: 900 mm, hitro pomikanje X-os: 10.000 m/min, hitri pomik na osi Z: 10.000 m/min, CNC Vertical Lathe Daewoo Doosan PUMA V-1200M, year 2002, equipped with FANUC Series 18-T control, designed for machining large and heavy workpieces, ideal for applications in heavy-duty and industrial sectors. Main technical characteristics: Maximum turning and swing diameter: Ø 1,600 mm Maximum turning height: 1,200 mm Maximum workpiece weight: 6,000 kg Chuck diameter: Ø 1,200 mm RAM axes: X (horizontal): 1,200 mm Z (vertical): 900 mm C axis: 360° rotation, minimum positioning: 0.001° Main spindle: Speed: 2 to 320 rpm (2 ranges) Power: 37/45 kW RAM driven spindle: ISO-50 taper Speed: 15 to 1,500 rpm RAM section: 240 x 240 mm Tool turret: 16 positions, for BT-50 type tools Max tool diameter: Ø 400 mm Max tool length: 450 mm Max tool weight: 50 kg Maximum total tool weight in magazine: 600 kg Feed rates: Rapid feeds X/Z axes: 10,000 mm/min Working feeds X/Z axes: 3,000 mm/min Included accessories: Chip conveyor Coolant tank with pumps Spindle line air conditioner Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Nwsdpswt S Rhefx Adpep A robust and high-performance machine for vertical machining of large and high-precision parts.