Center CNC za struženje in rezkanje

Mori Seiki NL2000Y NL200Y/500

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S4E184001, premer struženja nad prečnim suportom: 430 mm, stružna dolžina: 670 mm, premer struženja: 220 mm, izvrtina vretena: 45 mm, največja hitrost vretena: 6.300 obr/min, skupna masa: 4.300 kg, Rabljeni CNC stroj za trdo struženje s protivretenom Proizvajalec: EMCO Tip: Emcoturn 45E Leto izdelave: 2018 Hodjw Rrvwjpfx Ag Tsi Delovne ure: malo Krmiljenje: Siemens 828D Število pogonskih orodij: 12 kosov Največje število vrtljajev: 0–6000 min⁻¹

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: Hodpfx Aorz Nflog Tei - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Stanje: zelo dobro (rabljeno), Novo 2006 Hedpforfxr Usx Ag Tji Brother CNC-B00 krmiljenje Čas menjalca palet: 3,4 sekunde Velikost palete: 600 x 425 mm X-os: 550 mm Y-os: 400 mm Z-os: 415 mm Hitrost vretena: 12.000 min⁻¹ (rpm) 40-postajni avtomatski menjalec orodij (ATC) Vpenjalni stožec: BT30

Stanje: rabljeno, Leto izdelave: 2007, Turning diameter 300 mm Swing diameter over bed 430 mm Swing diameter over cross slide 300 mm Control SIEMENS, SINUMERIK 840 D Travel path - X 160 mm Travel path - Z 510 mm Maximum workpiece length 480 mm Main spindle bore 53 mm Main spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Main spindle motor 15 kW Sub-spindle bore 53 mm Sub-spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Sub-spindle motor 15 kW C-axis resolution 0.001° C-axis rapid traverse 1000 rpm Hsdpfxowx R Rko Ag Tei Tool turret 1 x 12 stations Number of driven tool stations 12 Tool holder shank (DIN 69880) VDI 25 Speed of driven tools 0 - 8000 rpm Torque 16 Nm Power 4 kW Feed force X/Z-axis 4000 / 6000 N Rapid traverse X-axis 24 m/min Rapid traverse Z-axis 30 m/min Total power requirement 38 kVA Machine weight approx. 4 t Machine dimensions L x W x H 2.65 x 1.84 x 2.32 m Accessories: Collet chuck 173 E on main spindle, Collet chuck 163 E on sub-spindle, Bar loader manufacturer FMB, type turbo 3-36/3200 A, Year 2018 for bar diameters up to 36 mm and bar lengths up to 3200 mm Various tool holders for turret (no driven holders), Coolant system

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Hsdpfxou Aa I So Ag Tji Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Alpha 1550XS - CNC cycle lathe incl. accessories Centre distance is 1500 mm, not 2000 mm 16-piece Multifix quick-change tool holder Year of manufacture: 2013 Excellent condition (truly in top condition) Various change jaws (soft jaws) Steady rest Faceplate Spindle bore: 104 mm Swing over bed: 550 mm 3-jaw chuck: 315 mm Hsdpfounruyox Ag Toi

Stanje: dober (rabljeno), Leto izdelave: 1997, premer struženja nad prečnim suportom: 60 mm, izvrtina vretena: 24 mm, moč vretenovega motorja: 7.500 W, vrtljajska hitrost (min.): 30 obr/min, največja hitrost vrtenja: 5.000 obr/min, skupna višina: 1.660 mm, skupna dolžina: 1.700 mm, skupna širina: 1.240 mm, skupna masa: 1.420 kg, CNC stružnica s vpenjalnim tulečkovim vpenjalom F38 Hsdpfxjvu Tvpo Ag Tji Največji stružni premer Ø 200 mm, pomiki X/Z 180/255 mm, revolverska glava SAUTER 8-pozicijska VDI20 (16x16 mm), vreteno 7,5 kW, vretenasti nos A2-4, hitrost vrtenja 30–5000 min⁻¹, premer prehoda palice Ø 32 mm, omejevalnik votlega vretena, krmilje FANUC Series T-20, priročniki

Leto izdelave: 2003, Stanje: dober (rabljeno), Travels 560 x 410 x 510 mm, table 900 x 410 mm, 30-tool magazine, 12,000 rpm spindle, chip conveyor Hsdpfx Ageiwkhkj Tji

Stanje: rabljeno, Manufacturer: LORENZ Model: LS 630 Condition: Used Stock Number: DCL1722 Module: 12 Max. Diameter: 630 mm Hjdpfxowr Dx Us Ag Toi Working Stroke: 220 mm Distance Table/Spindle Center: 450 mm Machine Weight: 10,000 kg Table Bore Diameter: 450 mm Table Diameter: 730 mm Spindle Diameter: 110 mm Distance Table to Spindle: 580 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 rabljeni stroj za umetanje Haeger 412 za umetanje umetaka u lim (studs i matice sa samourezivanjem) na prodaju. U kompletu s alatom i donjim alatom u obliku slova J. Hedpfswbhipox Ag Tji