Moog ventil za Battenfeld D663Z4714B

MOOG D663Z4714B

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 29.461 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, injekcijska masa: 140 g, Naprodaj: dobro vzdrževan Arburg 570C-2000-350 2K brizgalni stroj iz leta 2004 z le približno 30.000 obratovalnimi urami. Stroj je v dobrem tehničnem stanju in je takoj pripravljen za proizvodnjo. Specifikacije: Model: Arburg 570C Zapiralna sila: 2000 kN Premer polža: 35 mm (350) Leto izdelave: 2004 Obratovalne ure: približno 30.000 Krmiljenje: Arburg Selogica Izvedba: Standardna brizgalna konfiguracija, zanesljiv in vsestranski Stanje in vzdrževanje Stroj je bil vedno vzdrževan v skladu z načrtom Brez pomembne zgodovine okvar Čist in popolnoma delujoč hidravlični ter električni sistem Isdpfx Ajxyyxqsa Ujar Dodatne možnosti (opcijsko) Na voljo so tudi druge velikosti polžev.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, vpenjalna sila: 1.600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced controls for both injection units and supports multi-component processing. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine Arburg Allrounder 520 S 1600-290 / 290, which we are offering for sale. Please contact us for further details. • Injection Units and Plasticising • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Programmable and controlled nozzle contact force • aXw control ScrewPilot • 2nd injection unit: • 2nd injection aggregate 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Programmable and controlled nozzle contact force • aXw control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multicomponent processing; separation plane device on short skids for the 2nd • Injection with tool closed ("flying injection") • Drive, Hydraulics, and Cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l capacity (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; enhanced cooling performance • Controlled machine cooling circuits • Clamping System, Ejector, and Core Pulls • Clamping platen set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1, simultaneous movement (P/Q controlled, programmable) • Core pull 2, simultaneous movement (P/Q controlled, programmable) • Core pull 3, simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 including pressure reducer • Electrical core pull control 1 (requires VE 436/00) • Pneumatic/Hydraulic tool connections • Electrical connection pneumatic NVD 1 (in the tool) • Electrical connection pneumatic NVD 2 (in the tool) • Electrical and hydraulic connection NVD 3 (in the tool) Iajdpfxoyxdwde Aa Uer • Electrical and hydraulic connection NVD 4 (in the tool) • Blow-off device 1 with pressure reducer; connection for blow-off device 2 • Cooling water and tool circuit • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to the fixed platen; 3 cooling water circuits to the moving platen • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and Electrics • Selogica direct control; technology level • Circuit protection for heating circuits (1-6 with 16 A) • 15 electric heating circuits for tool heating • Boost function for heating circuits (hot runner) • Upper protective guard open, raised to safety distance • Fault display with flashing indicator • Operator authorization via chip card (EUROMAP 65) • Interfaces and Connectivity • Interface for conveyor belt (machine base) • Prepared for 6-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA