Monzesi Rossi Monza 500

Monzesi Rossi Monza 500

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, required space approx. 3.0x1.5 m. Pjdpfx Aouy Ifgoczjpl Before sale, the machine will be fitted with a new Siemens S7 control system including a new operator panel, and the dressing quill for the grinding wheel is electrically actuated via servo motor. The machine will be thoroughly checked, with defective parts repaired or replaced. Various options possible (coolant system, loading/unloading devices, workpiece rulers, etc.).

Stanje: rabljeno, Tool presetting device EZSET EZ400 Psdpfx Ajuhb Stjczspl

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Ppjdpjd Hy Elofx Aczel Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 50 h, številka stroja/vozila: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3,100 kg Overall dimensions: 230 x 155 x 170 cm Installed power: 13 kVA Customs code: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre distance: 650 mm Grinding capacity (SpW+bs): 80 Travel: 700 mm LONGITUDINAL SLIDE Max. stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Feed rate: 50–5,500 mm/min Reversal delay: 0–6 sec Max. table swiveling angles: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Ppsdpsw T Sd Tjfx Aczel Max. stroke: 300 mm Rapid traverse: 60 mm Plunge depth in diameter: 3.4 mm Feed rate 1: 0.012–6 mm/min Feed rate 2: 0.012–1.2 mm/min Feed per pulse: 0.001–0.05 mm GRINDING WHEELHEAD Left-hand wheel, external grinding: 400 x 80 x 127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Spindle speed: 1,670 / 2,110 rpm Internal grinding attachment for belt-driven spindles, incl. drive unit: 1.5 kW WORKHEAD Swivel range: 0–90° Infinitely variable spindle speed: 30–1,000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. workpiece weight between centers: 130 kg Air grinding load capacity: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Precision adjustment for cylindricity correction: ±40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of generator over 630 mm: 0.003 mm Roundness for air grinding: 0.0003 mm CONNECTION VALUES Max. absorbed power: 13 kVA Max. permissible voltage fluctuation: -15% / +10% Max. permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar Technical specifications provided without obligation and subject to change. Errors and omissions excepted.

Stanje: zelo dobro (rabljeno), Pressure: 0.5 - 20 t Workpiece diameter: max. 5 - 75 mm Thread length: 2000 mm Ppjdpfx Acovpaa Rszol Pitch: 8 mm Roll spindle mount diameter: 69.85 mm Tool diameter: 200 mm Roll spindle speed: 20 - 90 rpm Stroke: 0 - 20 mm Total power requirement: 7.5 kW Machine weight: approx. 3.1 t Space requirement: approx. 1.9 x 1.1 x 1.2 m

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, višina središča: 175 mm, vrsta vhodnega toka: trifazni, največja hitrost vretena: 1.500 obr/min, hitrost vretena (min.): 1 obr/min, dolžina podajanja os X: 285 mm, dolžina podajanja os Z: 800 mm, skupna masa: 4.000 kg, hitro pomikanje X-os: 5 m/min, hitri pomik na osi Z: 10 m/min, vhodna napetost: 400 V, CNC valjčni brusilni stroj STUDER S33 TEHNIČNE LASTNOSTI: Leto izdelave: 2008 CNC krmilje: FANUC 21i-TB Nameščena programska oprema: StuderGrind Razdalja med konicama: 650 mm Višina centrov: 175 mm Hod X osi: 285 mm Min. hitrost pomika X osi: 0,001 mm/min Maks. hitrost pomika X osi: 5000 mm/min Ločljivost X osi: 0,0001 mm Hod Z osi: 800 mm Min. hitrost pomika Z osi: 0,001 mm/min Maks. hitrost pomika Z osi: 10.000 mm/min Ločljivost Z osi: 0,0001 mm Zasuk B osi: -15° / +195° Natančnost indeksiranja B osi: Hirth 1° Vretenski nos za obdelovanec: MT5 Min. hitrost vretena obdelovanca: 1 rpm Maks. hitrost vretena obdelovanca: 1.500 rpm Največja masa obdelovanca med konicama v vpenjalni glavi: 80 kg Vpenjalo pinole zadnjega naslona: MT3 Hod pinole zadnjega naslona: 35 mm Premer pinole zadnjega naslona: 50 mm Fina nastavitev zadnjega naslona: +/- 40 mm Priključna napetost: 400 V Potrebna skupna moč: 20 kVA Teža: 4.000 kg PRILOŽENA OPREMA: x1 notranje brusilno vreteno tipa 102560B – hitrost: 60.000 rpm x1 hidravlični zglobni diamantni nož x1 fiksna brusilna enota, nameščena na mizi x1 rotirajoča brusilna enota (električna) x1 3-čeljustna vpenjalna glava Ø170 mm – MT5 x1 4-čeljustna vpenjalna glava Ø170 mm – MT5 x1 magnetna vpenjalna plošča Ø170 mm – MT5 x1 dvotočkovni podstavek x1 pnevmatsko dvigalo za zadnji naslon x1 pnevmatsko dvigalo za zgornjo mizo x1 vzdolžno vodilo z rotacijsko mizo – zasuk do 8,5° Podpfxoxywhps Aczjpl x1 samodejna B-os revolverska brusilna glava – Hirth 1° x1 C-os za brušenje navojev in oblik x1 merilna sonda za obdelovance MOVOMATIC C25 x1 naprava za kontaktno kontrolo DITTEL SENSITRON 6 x1 polavtomatska naprava za uravnoteženje brusnega kolesa MPM tipa BMT100M x1 papirni filtrirni sistem ARO TECHNOLOGIES tip 5491.246A01 x1 naprava za odsesavanje meglice AIR-FRESH SERVICE tip FMN-V12 x1 nožni pedal x1 klimatska naprava za elektro omaro x4 prirobnice za zunanja brusna kolesa x1 komplet za dvigovanje x1 nosilec osi (za transport stroja) x1 komplet navodil za uporabo (francosko, angleško in nemško) Dodatne informacije na zahtevo.

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Z dvema obdelovalnima moduloma, X-os: -50 do 725 mm, Y-os: -200 do 300/ -250 do 250 mm, hitro pomikanje X-, Y-, Z-osi: 18/12/30 m/min, krmiljenje: Siemens Sinumerik, temperaturno območje: 5-40°C, vrsta toka/frekvenca: 3 PEN/50Hz, nazivna napetost: AC 400V, krmilna napetost: DC 24V, pomožna napetost: AC 230V, priključna moč: 102 kVA, nazivni tok: 148A, nazivni tok (hiter): 148A, varovalka (počasna): 160A, dolžina: 8000 mm, širina: 3000 mm, višina: 4000 mm, teža: cca 17 t, stanje delovnih ur: cca 80.000 h. Stroj je popolnoma funkcionalen, kroglično vreteno (obtočno vreteno) Z-osi je bilo obnovljeno leta 2024, redno vzdrževan. Z dokumentacijo, razdelilno omaro, hidravličnim agregatom, filtrskimi elementi in transporterjem za ostružke. Ogled na mestu je možen. Ppodowbuyzopfx Aczsl

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. Ppodspugwispfx Aczsl A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: generalkompletno obnovljen (rabljeno), Centerless cylindrical grinding machine Psdpfx Ajmmqirjczepl MONZESI ROSSI MONZA 1500 (currently being overhauled and fully electrically/electronically retrofitted) Siemens electronics with touchscreen, brushless motor for the Z-axis (workpiece diameter) and regulating wheel (variable RPM), stepper motor for grinding wheel dressing increments, automatic size compensation after dressing the grinding wheel Grinding wheel: 350 mm diameter x 610 mm width This machine can be inspected at our warehouse in Gussago (BS), Italy. Plunge Grinding With the plunge grinding process, workpieces with stepped or profiled external surfaces—such as nozzle needles, valves, journal crosses, gearbox and electric motor shafts—are machined. Available technologies include straight or angled plunge grinding, plunge grinding for single or multiple workpieces, plunge grinding in several operations (simultaneously or sequentially), and oscillating plunge grinding. Through-feed grinding is used for machining unprofiled workpieces, such as cylindrical and tapered rollers, rings, rods, and hydraulic slide valves. This grinding process is highly productive and mainly used for series and mass production of precision components.

Stanje: dober (rabljeno), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Centre Distance: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Smallest Automatic Travel: 1.5 mm Maximum Travel: 400 / 700 / 1020 mm Maximum Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Handwheel Feed Travel: 20 mm Maximum Infeed Depth: 1.7 mm Grinding Spindle Head Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Spindle Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Spindle Head Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Mounting Taper: Morse 5 Collets: W25 Tailstock Mounting Taper: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW Ppodsvca Izspfx Aczol No guarantee is given for the correctness, completeness, or topicality of the information provided.