Avtopralnica - potapljanje

MOC DANNER U 90 RS - Tauchbecken

Stanje: novo, AGRE ALUP ALLEGRO 14+ 13 270 Speed-controlled. Space-saving. Cost-effective. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Outstanding compressed air quality. Cyclone separator and refrigerated dryer integrated. Detailed Features: Compression Concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-adjusted via frequency inverter Controller: Graphic control unit C55DD Refrigerated Dryer: Integrated, refrigerant R513A Filtration: Includes cyclone separator Tank: Horizontal, painted Ffsdpfxoixt I Hj Afljt Performance Data: Volume flow at 7.0 bar operating pressure: 0.26–2.26 m³/min Operating pressure min./max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil volume: 5.2 liters Dimensions and Weight: L x W x H: 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air tank capacity: 270 liters

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Cleaning System Type W 60 C Machine body, internal piping system, control cabinet, and washing basket made of stainless steel Combination machine – rotating table system with removable tilting device and small parts basket - Basket diameter (rotating table washing basket): 600 mm - Usable internal height: 370 mm - Basket load capacity (rotating table washing basket): 100 kg - Usable internal height: 530 mm - Small parts basket dimensions: 375 x 220 x 200 mm - Mesh size: 12 mm - Basket load capacity (small parts basket): 20 kg Full stainless steel construction Pump(s) and external piping/fittings version Suitable for operation with liquids with a density of 1.3, Ffodpfx Aoq Ewgkjflet featuring a reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO rinse (minimized rinse loss) for minimal water consumption Water supply from operator's mains with machine-side hot water supply Hot air drying 1 x 4 kW Oil skimmer Discharge device/floor flushing with pump and piping system in stainless steel

Stanje: rabljeno, Leto izdelave: 2009, Technical details: Basket dimensions: 1160 x 600 x 500 mm Heating power: 4 kW Rated power: 16 kW Rated current: 400V / 50/60 Hz Heating power: 4 kW Temperature range: 0 - 60 °C Machine weight approx.: 0.308 t Dimensions (L x W x H): 1.5 x 1.0 x 0.95 m Application: Suitable for use in workshops, manufacturing, and service operations The ultrasonic cleaning unit (bath) is equipped with an external generator for two modules. Type: MW 2000 GT with a 25 kHz frequency range Fjdpfxsu Nu Iys Afleft Sonic output: 2 x 2000 watts, adjustable in 9 steps Continuous mode/pulse mode or ultrasonic time/cleaning time adjustable (Possible output up to 11 kW) The housing, basket insert, and lid are made of stainless steel. Internal dimensions: L: 1160 x W: 600 x D: 500 mm (up to the outlet: 410 mm) Protection rating: IP23 The washer is mounted on a drip tray.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Ultrasonic Cleaning System ULTRA200 Usable platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load capacity: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Completely made of stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control: Manufacturer Fatek, HMI by Weintek Electrical connection power: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface overflow/oil separator for bath maintenance - Ultrasonic immersible transducer as 2-side sonication - Output: 2,000 watts effective / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual air blow gun Demonstration unit from the Glogar Technology Center, available immediately Fjdov U A Izjpfx Afljft

Stanje: novo, Leto izdelave: 2025, General: Fedpfx Aeddv Itjfloft - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min, max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level control - Indirect cooling system (shell-and-tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and controls: - Electronic PCB controller - Solid state relays - Safety thermostat - Sensor break monitoring - Connection cable with plug Available in approx. 4 weeks!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, Pressure: 500 t Clear width: 1100 mm Stroke: 600 mm Approx. machine weight: 22.8 t Table size: 1100 x 800 mm Ram surface: 1100 x 800 mm Installation height: 800 mm Hydraulics: 300 bar Closing speed: 60-200 mm/sec Pressing speed: 0 - 9.5 mm/sec Opening speed: 28-200 mm/sec Table height above floor: 900 mm Overall height above floor: 5100 mm Ffedpeffamvsfx Afljt Max. tool weight: 2000 kg Upper tool weight: 1000 kg Minimum hall height: 6500 mm Number of press cylinders: 1 pc. Number of traverse cylinders: 2 pcs. Pump capacity: approx. 270 l/min Oil tank: 600 l Main motor: 75 kW Siemens control system: S7 Safety control: PILZ Multi

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Manufacturer: LÖDIGE Fodpfx Asrywvdofljft Year of manufacture: 1988 Model: FKM 4200 D Electric motor: 75 kW Siemens

Leto izdelave: 2013, Stanje: dober (rabljeno), Univerzalni preizkuševalni stroj Zwick/roll Tip: 1488 Posodobljen leta 2013 s programsko opremo Največja preskusna sila: 200 kN Potreben prostor: Širina: 2.000 mm Višina: 2.100 mm Globina: 800 mm Teža pribl. 1.000 kg. Fjdpfx Afoxw N Uvsleft

Stanje: rabljeno, Leto izdelave: 2019, Technical specifications: Pressure: 1.5 / 0.15 bar / MPs Flow rate: 4,500 l/h Working diameter: 600 mm Usable height: 310 mm Housing/frame: Stainless steel Heating capacity: 4.5 kW Max. temperature: 80°C Adjustable cleaning time: 1 - 30 min Load capacity: 130 kg Connected load: 5.5 kW Tank capacity: 100 l Dimensions (LxWxH), approx.: 1080 x 1000 x 1250 mm Weight, approx.: 165 kg Features: - Fully automatic parts cleaning - Motor-driven turntable Ffsdpfxewpq Abs Aflet - 3-dimensional spray nozzle system - Operating hours counter - Retaining ring (stainless steel for turntable) - 2 lockable swivel castors - Timer for cleaning cycle - Water level control

Stanje: novo, Leto izdelave: 2025, CORMAK HR500SA is an advanced automatic band saw designed for cutting solid materials, pipes, and large-section steel profiles. Thanks to its dual-column design and reinforced frame, the machine delivers maximum stability, precision, and repeatability of cutting—even during continuous operation. Technical specifications: Automatic band saw HR500SA Cutting range: Ø500 mm or 650 x 500 mm Blade dimensions: 6600 x 41 x 1.3 mm Blade speeds: 27 / 45 / 69 m/min Total power: 6.5 kW Blade tensioning: manual Feeder stroke: 500 mm Table height: 715 mm Load capacity: 3000 kg Ffsdpfxsi Ab Dlj Aflst Dimensions (L x W x H): 3200 x 3050 x 2115 mm Weight: 3200 kg Standard equipment: Touchscreen control panel with memory settings Automatic work cycle Top bundle clamp Hydraulic material feed system Three-speed cutting gearbox Cooling system and cleaning brush Bi-metal cutting blade CE declaration of conformity, DTR manual