Koordinatni merilni stroj

Mitutoyo Crysta Apex C9206

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 700 mm, merilno območje osi Y: 700 mm, merilno območje os Z: 600 mm, Oprema: Na voljo je tipska ploščica, Mitutoyo Coordinate Measuring Machine Type Crysta Apex C776 Temperature compensation on all axes Active vibration isolation system by BILZ Measuring range X-axis = 700mm Measuring range Y-axis = 700mm Measuring range Z-axis = 600mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Renishaw probe head PH10MQ Laodpfjwhfh Asx Adrji Renishaw change rack SCR200 Renishaw sensor TP200 Renishaw TP200 modules = 6 pieces Measuring software MCosmos PC system WIN10, 27" monitor Reference sphere / calibration sphere Software upgrade optional Hardware upgrade optional Full-service available upon request

Leto izdelave: 2021, Stanje: kot nova (razstavni stroj),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Centre, manufactured in August 2000 in Germany. This milling center operates in three axes, with maximum X / Y / Z travel distances of 800, 600, and 500 mm. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN connection to an external computer. Additionally, this machining centre comes with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel probe, and an electrical cabinet cooling unit. The spindle reaches a maximum speed of 15,000 rpm. Recorded spindle hours: approximately 4,500 hours. The total weight of the machining centre is around 7 tons. Technical specifications of the Hermle C 800 V CNC machining centre – Travel (X / Y / Z axis): 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C 800 V CNC machining centre – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Tool holders: SK40 – Through-spindle coolant pump: 40 bar Laodpfx Asiva Dkedrsi – Electrical cabinet air conditioning – Swivel probe – Chip conveyor Available separately as pictured: Tool pre-setting device Various SK40 tool holders Heidenhain TS32 touch probe (as new)

Stanje: rabljeno, Tool holder interface type: HSK-A 100 Tool holder type: Wohlhaupter Tool holder type: Fine boring tools / Facing heads / Precision turning Laedpfxeg Nqlis Adrji Large selection of Wohlhaupter HSK-A 100 tool holders, boring heads, adapters, and extensions available for sale. A parts list with prices will be provided upon request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, GEBRAUCHTE Taiwan Takisawa EX-108 Hochleistungs-2-Achsen-CNC-Drehmaschine Seriennummer: CA11E80453, Baujahr 2000 HINWEIS: Dies ist das 2-Achsen-Modell EX108, nicht das 3-Achsen-Modell EX308. • Schwere Schrägbett-Gusskonstruktion • Fanuc 21iT CNC-Steuerung • 4-fach schwere Linearführungen • Hochgeschwindigkeits-Servorevolver • Werkzeug-Einstellvorrichtung • 8" 3-Backen-Hohlspannzylinder hydr. Spannfutter • Stückzähler • Werkzeughalter im Lieferumfang enthalten Max. Umlaufdurchmesser über Bett: 400 mm Max. Umlaufdurchmesser über Planschieber: 320 mm Spitzenweite: 645 mm Standard Drehdurchmesser: 216 mm Max. Drehdurchmesser: 320 mm Lajdpfxst E Hvge Adroi Max. Drehlänge: 530 mm Stangendurchlass: 52 mm X-Achse Verfahrweg: 180 mm Z-Achse Verfahrweg: 530 mm Spindeldrehzahlen: 60 – 4000 U/min Spindelnase: A2 – 6 Spindelbohrung: 63 mm Revolverkopf: 12 Stationen Reitstockverfahrweg: 435 mm Reitstockpinolenhub: 100 mm Reitstockpinolenaufnahme: MK 5 Eilgang (X & Z): 20 & 24 m/min Handvorschub (X & Z): 0 – 1260 mm/min Spindelmotor: 7,5 / 11 kW Elektrik: 415V, 3PH, 50HZ Aufstellfläche: 2240 mm x 1645 mm Maschinengewicht: 4300 kg

Stanje: novo, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m Laedpfxefg E Hye Adrei SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic band saw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile materials, with a maximum remnant piece length of 60 mm. - The cross-section max. is 230x230 mm. - Numerically controlled band saw with the new Windows “CE” based system, specifically developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for the machine's operating functions, ensuring reliable operation, simple and intuitive use, and real-time monitoring of all cutting parameters. - Safety enclosure in accordance with the latest EN 13898/2007 machinery directive requirements. - New fieldbus communication system with dual microprocessor and serial connection. - Robust cast iron (G25) construction to compensate for vibrations, improve machine stability, and prolong band saw blade life.

Stanje: rabljeno, Description: Main Spindle: Technology: Belt-driven spindle with gearbox Speed: 1,000 rpm Power: 45 kW Torque: 4,008 Nm Bar capacity: 205 mm Workpiece clamping I: 3-jaw chuck, Autogrip AP-230 ø535 mm Workpiece clamping II: Manual 3-jaw chuck, Chandox SK20 (rear of spindle head) Tool Carrier (X/Y/Z): Technology: Turret with 12 stations Lasdpowt Iwqjfx Adroi Tool holder: BMT 75 Driven tool speed: 3,000 rpm, 7 kW, 83 Nm Travel X/Y/Z: 340/160/3,250 mm Rapid traverse X/Y/Z: 20/7/12 m/min Tailstock: Technology: Programmable quill drag-type tailstock Quill stroke: 150 mm Taper: MT5 Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pump (IKZ) Tool measurement: Measuring arm, Renishaw RP3 Oil mist extraction: Mechanical separator, make AR Filtrazioni ARNO 3VF YF Shaft machining: Manual steady rest, ø150-300 mm Tool holders: Various static and driven holders Setup mode: Electronic handwheel Additional features: Automatic door (pneumatic), transformer, oil skimmer Further accessories: Various jaws and EWS quick-change inserts

Stanje: dober (rabljeno), Maks. premer: 560 mm Lsdov Dvzyepfx Adrjai Delovna dolžina: 3550 mm Maks. dolžina obdelovanca: 4000 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Available directly from toolmaking department Vertical Machining Center Make: DMG Model: DMC 104 V Linear Year of manufacture: 2003 CNC: Siemens 810 D Powerline Spindle hours: 18,200 (as of July 2024) Table size: 1250 x 600 mm Travel X-axis: 1000 mm Travel Y-axis: 600 mm Travel Z-axis: 500 mm Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Drive power: 13/19 kW at 100/40% duty cycle Tool changer: 30 stations Equipment: • Linear drive in X-axis • Bed flushing • Spiral chip conveyor • Direct position measuring system • Drill breakage control via laser • Z-axis temperature compensation via sensor incl. active cooling unit • Internal coolant supply through the spindle • External air blast via 2 pipes • Coolant system 700 liters, paper band filtration system with high-pressure unit 40 bar • Visiport viewing window on operator door • Additional machine door on left side • Bader cooling unit on control cabinet • Prepared for connection of a 4th axis with Siemens 1FT 6064.1AF71-4AG1 drive motor and indirect measuring system with seal air 0.5 bar Laedpfx Adet I Di Ajrsi

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Laodjt Hw R Depfx Adrsi Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice