Industrijski robot

Mitsubishi RV-7FL-D1-S15

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Knedpfx Ahsia Rtdj Aof Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: rabljeno, Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 250 mm Kodpfx Ahot Tqrne Asnf Workpiece height approx.: 385 mm Table clamping surface: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: Ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical feed: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross feed: 1000 mm/min Total power requirement: 6 kVA Machine dimensions (L x W x H): 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, dressing device, wet grinding system with paper band filter

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: Ksdpfx Ahorz Nfle Aonf The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Stanje: dober (rabljeno), Leto izdelave: 2011, Industrijski robot Proizvajalec: Kuka Tip: KR30-3 Leto izdelave: 2011 Doseg: 2.033 mm Teža: 665 kg Knjdpfx Ahoi Ezv Ne Ajf Nosilnost: 30 kg Kuka krmilnik KRC4 Teža: 150 kg Programska oprema V8.3.40 Kuka zaslon na dotik Kuka povezovalni kabli 101225ä

Stanje: dober (rabljeno), Leto izdelave: 2014, Industrijski robot Proizvajalec: Kuka Tip: KR60L30-3 Letnik: 2014 Približno 15.600 ur Doseg: 2429 mm Teža: 665 kg Nosilnost: 30 kg Kuka krmilnik KRC4 Teža: 150 kg Programska oprema V8.3.40 Kuka zaslonska plošča na dotik Kuka povezovalni kabli Kedpfsn Uv Disx Ah Asnf 101225ä

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F21/0023666, Oprema: dokumentacija / priročnik, Technical specifications: Maximum load: 20 kg Rated load: 7 kg Reach: 1000 mm Number of degrees of freedom: 6 Repeatability according to ISO 9283: ± 0.03 mm Pneumatic connection: 2 direct lines between base and lower arm Knedpjpd In Dofx Ah Asf 2x 5/2-way bistable solenoid valves (compressed air) Electrical connection on arm: 17 electrical I/O lines Multibus cable in arm: 13 electrical lines, 4 Multibus Cat5e lines, DIN M12 Standards and protection classes: Cleanroom standard – ISO 14644-1: Class 5 Protection class (wrist): IP65 (*IP67) Safety: Absolute encoders up to SIL3-PLe class ensure maximum safety. Control and license: CS9 control with VAL3 license Controller power supply: 3x400-480V-50/60Hz Other equipment: Control panel (with 5m cable) This robot not only offers impressive technical parameters, but also the highest safety standards thanks to SIL3-PLe class encoders. With a wide range of applications and precise repeatability, it is ideal for various industrial purposes. For further information or to schedule a tour, please contact us by email or phone (in English). We are happy to answer your questions and look forward to your interest.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, nosilnost: 5 kg, doseg roke: 704 mm, Fanuc LR Mate 200 iC Robot (E-29388) with Cell Vision System Country of origin: Japan Knsdsqgck Dspfx Ah Aef Year: 2007 Control unit: R-30iA MATE Number of axes: 6 Payload capacity: 5 kg Reach: 704 mm Repeatability: ±0.02 mm Robot weight: 27 kg Camera: Sony XC-56

Stanje: dober (rabljeno), Offered for sale is an external cylindrical grinding machine from VEB Werkzeugmaschinenbau, model SU 200/1x800. The machine is fully operational and ready for immediate use. Kedpordf Hgjfx Ah Aonf Technical specifications: - Grinding diameter: 200 mm - Grinding length: 800 mm - Swing diameter: approx. 160 mm - Workhead speed: 200–1000 rpm - Workhead taper: MK2 - Grinding wheel diameter: approx. 330 mm - Table size: 900 x 200 mm - Dimensions: 3050 x 1300 x 1430 mm - Weight: 4.6 t Upon request and at additional cost, loading and transportation (Europe-wide) can be organized. All prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or ways to contact us, please visit our website.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, obratovalne ure: 400 h, Funkcionalnost: popolnoma funkcionalen, We are offering for sale a powerful Stäubli TX200 industrial robot that has undergone a comprehensive diagnostic test by the Stäubli service team. The test results confirm that with only 400 operating hours, the robot is in a condition comparable to that of a new machine. For a more detailed review, the service report is available in PDF format. Technical Specifications: - Rated payload: 100 kg - Reach (axis 1 to 6): 2194 mm - Repeatability (ISO 9283): ± 0.06 mm - Maximum speed at center of load: 12 m/s - Cleanroom standard (ISO 14644-1): 5 - Protection rating (wrist): IP65 (*67) Equipment and Features: - Control unit: Stäubli CS8 series CS8C HP - Digital I/Os: 16/16 - Connection cable: 10 m long - WMS mode selection and SP1 control panel - Docking station Components and Interfaces: - Pneumatic system: 2 solenoid valves, 5/2 monostable configuration, and 3 direct lines between base and forearm - Electrical system: 1 socket with 19 contacts (7 twisted pairs, 2 of which are shielded, 3 power contacts) - Expansion option: Ethernet 19-pin circular connector with 5 twisted pairs and 3 power contacts Thanks to its calibration and powerful features, this robot is ideal for precision applications, including machining tasks. It is fully equipped and ready for use in industrial environments. Knsdpfx Ahonncale Aof For further information or to arrange a viewing, please do not hesitate to contact us. We look forward to working with you.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 4.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F17/5EWVB1, skupna masa: 350 kg, nosilnost: 30 kg, doseg roke: 1.700 mm, I am offering the Stäubli RX160 robot with the option to add a uniVal Drive. The robot is in almost mint condition, with only 4,500 operating hours on the motors. Photo available. Maximum payload: 30 kg Rated load: 20 kg Reach (between axis 1 and 6): 1,710 mm Number of axes: 6 Knedsr Dvd Iepfx Ah Aof Repeatability – ISO 9283: ±0.05 mm Stäubli CS8C series controller Weight: 248 kg