Robot

STÄUBLI RX60CR

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Ijdpfx Ahoia Rtde Aotr Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: rabljeno, Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx.: 385 mm Table clamping surface: 600 x 200 mm Isdpot Tqrnjfx Ah Astr Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: Ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical feed: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross feed: 1000 mm/min Total power requirement: 6 kVA Machine dimensions (L x W x H): 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, dressing device, wet grinding system with paper band filter

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: Isdpsrz Nflofx Ah Astr - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, številka stroja/vozila: MA0139_1335, Exhibition unit available immediately: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and air receiver tank Sigma Control 2 controller Year of manufacture: 2024 Operating hours: 1 h Pressure: 8 bar Rated power: 11 kW Free air delivery at 7.5 bar: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Air receiver tank volume: 350 litres Refrigeration dryer pressure dew point: +3°C Electronically controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 750 x 1335 x 1880 mm Weight: 579 kg Iodpfx Aehwwyroh Aotr Attractive lease financing for new machines available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock!

Stanje: dober (rabljeno), moč: 30 kW (40,79 KM), Leto izdelave: 2010, obratovalne ure: 51.548 h, temperatura okolja (min.): 3 °C, okoljska temperatura (maks.): 45 °C, tlak (maks.): 8 letvica, največja hitrost vrtenja: 2.945 obr/min, številka stroja/vozila: 100609.1, Oprema: Na voljo je tipska ploščica, The Kaeser ASD 57 is an energy-efficient screw compressor designed to provide reliable compressed air supply for industrial applications, characterized by its compact design and quiet operation. Featuring advanced Sigma Profile technology and intelligent control, it delivers optimal performance and durability. Ijdpfx Aot Iwyuoh Aotr Technical details: Article number: 100609.1 Serial number: 1941 Year of manufacture: 2010 Rated power: approx. 30 kW Maximum operating overpressure: 8 bar Motor speed: 2,945 rpm Condition: used (see pictures and nameplate)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F21/0023666, Oprema: dokumentacija / priročnik, Technical specifications: Maximum load: 20 kg Rated load: 7 kg Reach: 1000 mm Number of degrees of freedom: 6 Repeatability according to ISO 9283: ± 0.03 mm Pneumatic connection: 2 direct lines between base and lower arm 2x 5/2-way bistable solenoid valves (compressed air) Electrical connection on arm: 17 electrical I/O lines Multibus cable in arm: 13 electrical lines, 4 Multibus Cat5e lines, DIN M12 Iedpepd In Dsfx Ah Aetr Standards and protection classes: Cleanroom standard – ISO 14644-1: Class 5 Protection class (wrist): IP65 (*IP67) Safety: Absolute encoders up to SIL3-PLe class ensure maximum safety. Control and license: CS9 control with VAL3 license Controller power supply: 3x400-480V-50/60Hz Other equipment: Control panel (with 5m cable) This robot not only offers impressive technical parameters, but also the highest safety standards thanks to SIL3-PLe class encoders. With a wide range of applications and precise repeatability, it is ideal for various industrial purposes. For further information or to schedule a tour, please contact us by email or phone (in English). We are happy to answer your questions and look forward to your interest.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Two-axis positioner for KUKA industrial robots Itsdjlhr H Hopfx Ah Asr Maximum payload: 500 kg Position repeatability accuracy: 0.1 mm Overall height: 982 mm Tilting range: +/- 93° Rotation range: unlimited Installation position: floor-mounted Rated welding current (100% duty cycle): 500 A (60% duty cycle): 600 A

Stanje: rabljeno, Leto izdelave: 2018, Naprodaj je kolaborativni robot UR3, 6-osna roka s 3 kg nosilnosti in dosegom 500 mm. Roboti so bili uporabljeni predvsem za demonstracijske namene in imajo malo delovnih ur, zato so v odličnem stanju. Pred odpremo bo vsak robot temeljito preizkušen in varno zapakiran. Ijdpfx Ahowdl Sge Ajtr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10014487, nosilnost: 240 kg, doseg roke: 2.896 mm, We offer industrial robots manufactured by KUKA. The scope of delivery includes the robot arm, control cabinet, and the corresponding cables. The robots originate from a fully functional system and have been professionally dismantled. We conduct a functional test and inspect the robots prior to sale. If you are interested, we offer the option to demonstrate the robots’ features to ensure they meet your requirements. We provide a 14-day return policy for these units. Further warranty services are excluded. — Optional Add-On — We are pleased to offer a new feature for our robots: the Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate emergency stop functionality, a safety gate, and start-stop interfaces via Profisafe bus. The controller is fully engineered and programmed, enabling a simple turnkey solution with one robot and a safety enclosure. Additionally, we can provide further commissioning support upon request. We have an extensive inventory of these robots, and the quoted prices refer to a package deal. For larger order quantities, discounts are negotiable. Please feel free to contact us again to discuss further details. Itjdorlmunepfx Ah Ajr Sale to commercial customers only.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, nosilnost: 5 kg, doseg roke: 704 mm, Fanuc LR Mate 200 iC Robot (E-29388) with Cell Vision System Country of origin: Japan Year: 2007 Control unit: R-30iA MATE Number of axes: 6 Payload capacity: 5 kg Reach: 704 mm Repeatability: ±0.02 mm Isdpoqgck Djfx Ah Astr Robot weight: 27 kg Camera: Sony XC-56