Tračna žaga

MIOTAL S 225 G

Stanje: rabljeno, Circular Trough Vibratory Finishing Machine WALTHER TROWAL Type CLS-230 Item No. 05.833/00 Year of Manufacture: 1969 Trough Diameter: 1,100 mm Total Trough Height (external): approx. 650 mm Processing Tank / Gross Volume: max. 230 liters Usable Volume: approx. 115 liters Rotational Speed: 1,100 to 1,800 rpm, infinitely variable Motor Power: 7.5 kW Mains Connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator gearbox Lredpfxsfqpxis Abbjg - Manually adjustable eccentric imbalance weights - Tank with polyurethane lining (lining partially damaged or worn) - Soundproofed cover - Manual separation flap - Integrated screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1,800 x 1,750 x 1,700 mm Net weight: approx. 1,800 kg Good condition Function description: Workpieces and media are set in motion by the induced vibration and are tumbled very gently. The continuous relative movement between the workpieces and the media results in the deburring and surface finishing of the workpieces.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991 Model: ITPS III Serijska številka: ITPS 80C 25 P1C226 Maksimalna sila stiskanja: 800 kN Delovni hod: 115 mm Napajanje: 415 V, 50 Hz, 3 faze Nazivni tok: 119 A Vgrajena moč: 18,5 kW Teža stroja: 4940 kg Inventarna številka: 9.14 Krmiljenje: Delem DA-65R Stroj se zažene, vendar krmilje ne reagira na ukaze. Prejšnji uporabnik je originalno krmilje AMADA zamenjal z DELEM. Lrsdpfswq Dpqsx Abbog

Stanje: rabljeno, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom built MaVo Type 5t-20 Previously used for broaching keyways in through-holes. Press capacity: 5 tons (at 100 bar hydraulic pressure) Frame width: 770 mm Cylinder stroke: 220 mm Distance from piston rod thread to table traverse: max. 900 mm Ram downwards press speed: approx. 11.5 mm/sec (220 mm in 19 sec) Ram upwards press speed: approx. 24.5 mm/sec (220 mm in 9 sec) Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Two-hand operation (2 buttons for down, 1 button for up) - HAWE hydraulic pump, Type K5/3 (can deliver up to 400 bar, but the pump becomes very loud at this pressure) - Piston rod thread connection: M42 x 1.5 mm external thread - 1 piece screw-in extension approx. 290 mm for piston rod with M42 x 1.5 mm internal thread - 1 piece screw-in extension approx. 250 mm for piston rod with M42 x 1.5 mm internal thread - 2 pieces ram extensions for inserting into screw-in extension, lengths: 110 and 130 mm - 2 support plates - Very robust steel construction made of 140 mm double I-beam Ledpfx Abswki Apoborg - Estimated load-bearing capacity of the steel frame: likely 40 tons or more - Movable with pallet truck Required space (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg

Stanje: dober (rabljeno), Razpon rezanja okroglega jekla pri 45°: 250 mm, Obseg rezanja okroglega jekla pri 90°: 280 mm, največja višina reza: 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Miter angle: 0 - 60º Equipped with: - Coolant system Country of origin: Italy Motor power: 1.8 kW Ledpfxstt Nd Ro Abberg Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Stanje: novo, Machine in stock and immediately available Double mitre metal band saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor power rating S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made from stainless steel, steel, etc., for commercial use - Rugged, generously sized cast saw arm for low-vibration operation - Two blade speeds for optimal adjustment to the workpiece - Hydraulic downfeed cylinder - Quick-action vice for fast and easy clamping of workpieces - Precise, adjustable blade guides for optimum cutting results - CE/IEC compliant, with German documentation and German after-sales service Scope of delivery: - Saw blade - Material stop - Manometer (blade tension) - Carbide blade guides - Vice with quick release - Integrated coolant system - Hydraulic bow downfeed - Motor protection switch - Automatic end cut-off - Base frame Ledod R Sipopfx Abbsrg

Stanje: rabljeno, Leto izdelave: 2007, največja širina rezanja: 1.060 mm, največja višina reza: 1.060 mm, Band saw Kasto HBA 10×12, year of manufacture 2007 Cutting capacities: - Round material: 1,060 mm - Square material: 1,060 x 1,060 mm - Flat material: 1,060 x 1,260 mm Clamping range: 300 – 1,260 mm Smallest dimension to be cut approx.: Ø 300 mm Shortest cutting length: 10 mm Minimum remnant length for single cut: 20 mm Minimum remnant length in automatic mode: 100 mm Table load capacity: max. 50 t Table travel: 6,100 mm Total drive power: 20 kW Saw motor: 11 kW Cutting speed, stepless at 50 and 60 Hz: 12 – 90 m/min Ljdjwk D Efopfx Abbsrg Automatic single feed length: 2,100 mm Clamping force machine vice: 50,000 N Saw band dimensions: 11,430 x 80 x 1.6 mm Cutting feed: steplessly adjustable Material feed: hydraulic Material clamping: hydraulic Saw band guide: carbide, replaceable Saw band tension: hydraulic Saw band cleaning: easily exchangeable brush, motor-driven This offer is exclusively for commercial customers within the meaning of Section 14 of the German Civil Code. No sale to private individuals.

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 Ljdpfsnzpx Rjx Abbjrg -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Leto izdelave: 2015, Stanje: rabljeno, Dimensions (L x W x H): 700 x 655 x 1,400 mm Filter surface: / m² Lrodpfx Asgr Rkxobbeg Number of filter bags: 1 pc. Number of chip collection bags: 1 pc. Weight: 140 kg with control box and start-stop sensor

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Lrjdpfx Ajt Iklkebbog Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Stanje: novo, Saw blade diameter 315/350 mm Cutting capacity at 90°: round 125 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 160x90 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: square 90 mm Cutting capacity at 60°: flat 80x100 mm Total power requirement 1.8/2.5 kW Machine weight approx. 0.2 t Space requirement approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For miter cuts left and right up to 45°, end stop at 90° and at 45° left • For cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vise with quick-clamping lever, longitudinally adjustable jaw, adjustable guide, and double clamping arm for burr-free cuts • Cone safety clutch made of hardened steel to protect the saw blades Lrjdpfx Aod Iin Tobbog • Large base plate made of solid cast iron for maximum stability and vibration-free sawing • 2 speeds: 30 + 60 rpm • High-performance special gearbox with elastic coupling for heavy-duty applications • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in handle with restart interlock • Length stop, assembly tools ATTENTION: Price does not include saw blade!!!