Horizontalna tračna žaga

MIOTAL® S 150 G

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting area at 45°: flat 135 x 185 - 145 x 150 mm Cutting area at 45°: round 150 mm Cutting area at 45°: square 145 mm Cutting area at 60°: flat 63 x 107 - 69 x 90 mm Cutting area at 60°: round 70 mm Cutting area at 60°: square 70 mm Cutting area at 90°: flat 240 x 160 - 250 x 110 mm Cutting area at 90°: round 225 mm Cutting area at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight: approx. 200 kg Required space: approx. 1385 x 580 x 890 mm Technical features: - Hydraulic system for controlling saw head descent - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil bath gearbox - Saw bow, vice, and mitre assembly made from cast steel - Steel saw blade guide with ball bearings - Quick-release vice - Front-integrated lever for mitre angle lock - Coolant pump with aluminium body - Large handwheel for easy blade tensioning - Pressure gauge for blade tension display (600-1000 kg/cm³) - Emergency stop safety switch - Swarf brush for saw blade cleaning STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for series cuts Crodpfelb I Dajx Adiof - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment

Leto izdelave: 2026, stanje: novo, VKM – Destacking System for Milled Timber With our solution for separating milled timber, whether loosely stacked or in bundles, pre-milled timber pieces can be efficiently processed further. Using a two-stage system, the timber pieces are separated and made available for downstream processing. It is also possible to feed the separated timber pieces into a continuous process in a controlled manner. Cjdpfx Adjg Rxhgoijrf The infeed mechanism is mechanically engineered to reliably feed even warped timber. Additionally, it can be adjusted for timber diameter to ensure that only one piece is conveyed at a time, preventing bottlenecks and stoppages further down the processing line.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration / Trade Show / New Machine Robust construction for long service life Infeed height: 200 mm Infeed width: 500 mm Number of chipping knives: 2 pcs Number of counterknives: 1 pc Rotor diameter: 520 mm (solid steel rotor) Number of infeed rollers: 3 pcs Throughput capacity: up to approx. 20 stacked cubic meters/hour* Chip length: approx. 30 mm Chipper drive power: 45 kW or as agreed Infeed roller drive power: 2 x 2.2 kW Operating/control voltage: 400/220 V, 50 Hz Weight: 2,600 kg *Depending on chip length, main motor kW, number of knives, and infeed method S&F chippers and drum chippers with horizontal infeed are used in many sectors of the wood processing industry (sawmills, timber plants). The “ATH” series chippers produce high-quality, homogeneous wood chips with low fines content from wood residues, e.g., as premium chips for the pulp industry or as fuel chips for energy generation. Advantages: - Maximum throughput - Low fines content - Low maintenance Crjdpfx Adsw I R Rnsijf - Flexible application - Custom manufacturing Do you need further information? Contact us! We are happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Shredder

Leto izdelave: 2014, stanje: dober (rabljeno), For sale: Nilfisk Compact Industrial Safety Vacuum Cleaner Model CTS40 M Z22 400 V 4 kW 9 A Crodpfx Aohu Sf Hsdief 50 Hz 114 kg ATEX-certified (explosion proof) The vacuum cleaner is in good condition and ready for immediate use. Machinery buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you in need of a high-quality, yet affordable metalworking machine for your manufacturing operations? Or are you looking to sell your equipment? For more information or ways to contact us, please visit our website.

Stanje: novo, Leto izdelave: 2024, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical data for the tier trolley: Manufacturer: LPR Type: 600 01x Tier trolley, new Frame colour: blue / orange Overall height incl. castors: 2,150 mm Overall width: 1,550 mm Overall depth: 600 mm Number of levels: 3 pcs. Cedpfodb N Hmex Adiorf Consisting of: 02x Upright frames, new Frame colour: blue Frame profile dimensions: 50 x 50 mm Incl. horizontal and diagonal bracing, metal base plates, plastic end caps Uprights are pre-assembled (bolted lattice construction) 2,000 mm high 600 mm deep 06x Cross beams for workbench, new Beam colour: orange Design: stepped beam Clear span: 1,450 mm Profile dimensions: 80 x 50 mm Compartment load: 300 kg (with evenly distributed load) 12x Safety pins, new For securing the longitudinal beams against unintentional lifting 03x Inlay shelves, second choice, used Thickness: 22 mm Dimensions: 1,430 x 545 mm 02x Double-braked swivel castors, new 02x Swivel castors, new 08x Machine screws: M8 x 20 mm 08x Nuts: M8 08x Washers Images are for material clarification. Actual material colour may vary. - Workbenches are supplied unassembled; - Workbench frames are pre-assembled; - Production time is usually approx. 3 - 5 working days. Our range of services: (prices upon request) - Assembly, installation Please observe our general assembly conditions - Racking inspection Inspection carried out according to DIN EN 15635 and requirements of BGR 234 (visual inspection for all racking systems) - Delivery using our own vehicle fleet (unloading not included)

Stanje: rabljeno, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted. Credpfx Aswzzgnsdief

Stanje: novo, Cutting diameter: 355 mm Saw blade dimensions: 3770 x 34 x 1.1 mm Cutting speed: 20 - 80 m/min Cutting width: 490 x 280 mm Cutting capacity at 45° round: 290 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 60° round: 230 mm Cutting capacity at 60° square: 180 mm Crsdpfx Asmhm Aqjdief Supply voltage: 400 Volt Total power requirement: 2.2 kW Machine weight: approx. 0.7 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Semi-automatic Mitre Bandsaw - Mitre cuts up to 45° left and right - Mitre cuts up to 60° right - Vise with quick-release device - Band tension control via manometer - Electric coolant system

Stanje: novo, Leto izdelave: 2026, CORMAK HBS260 je kovinska tračna žaga, namenjena rezanju cevi, profilov in palic, ki se pogosto uporablja v delavnicah za izdelavo ključev in kovinarskih delavnicah, kjer so pomembni natančnost, kakovost in hitrost rezanja. Model ima vrtljiv ročaj od 0° do 60°. Zasnova okvirja zagotavlja natančno in tiho delovanje. Ima odstranljiv pladenj za enostavno čiščenje! Lastnosti stroja Horizontalna kovinska tračna žaga CORMAK HBS260 z vrtljivim ročajem omogoča rezanje pravokotno na os materiala in pod poljubnim kotom v območju od 0° do 60°. Material se lahko dovaja ročno ali s pomočjo katerega koli mehaničnega pripomočka, pri čemer deluje avtomatski sistem za podajanje orodja. Vodila rezila so opremljena s posebnimi ploščami iz karbida in ležaji, ki bistveno vplivajo na vodenje rezila, življenjsko dobo, ravnost, natančnost in kakovost rezanja. Sistem vodenja iz karbida bistveno zmanjšuje obrabo stroja in rezila. Stroj je opremljen z učinkovito črpalko za hladilno tekočino in zaprtim sistemom kroženja hladilne tekočine. Ročaj žage je izdelan iz enega samega litoželeznega elementa, s 27 mm širokim rezilom pa omogoča serijsko rezanje profilov in masivnih materialov. Objemka je nameščena na nastavljivi podlagi in ima sistem za hitro spenjanje. Vodila rezila so opremljena s ploščami iz trdega kovine (karbida) in sisteme valjčnih ležajev. Ta karbidna vodila zagotavljajo natančnost in ravnost rezanja. Zgornji del podlage je oblikovan kot pladenj za odvajanje hladilne tekočine in zbiranje ostankov, ki nastanejo med rezanjem. Podlaga je opremljena z litoželezno delovno mizo z vrtljivim ročajem in nadzorno ploščo, nameščeno na ločenem ročaju. Med postopkom rezanja je glavna gibanja gibanje rezila, podajanje pa se doseže s spuščanjem ročaja. Hitrost spuščanja ročaja (hitrost rezanja) se nadzoruje s hidravličnim cilindrom. Hitrost podajanja se uravnava preko nadzorne plošče žage. Na voljo sta dve hitrosti rezila: 35 in 70 m/min. Ko ročaj doseže spodnji položaj (po rezanju), se pogon na rezilu samodejno izklopi. Varnost zagotavljajo zaščitni pokrovi rezila in mikro stikala, ki izklopijo motor po ciklu rezanja ali ob odprtju katerega koli pokrova. Dodatna zaščita samodejno izklopi tračno žago v primeru zloma rezila. Velikost rezila [mm] 2520 x 27 x 0,9 Napetost rezila: mehanska (ročna) Hitrost rezila [m/min] 35, 70 Nadzor spuščanja ročaja: brezstopenjski – hidravlični cilinder Višina podlage objemke [mm] 860 Premer žaginega kolesa [mm] 300 Vrtljivost žaginega okvirja [°] 0–60 Napajalna napetost: trifazna 400 V Moč glavnega motorja [kW] 1,1 / 1,5 Moč motorja črpalke za hladilno tekočino [kW] 0,05 Dimenzije z podlago [cm] 150 x 80 x 140 Teža [kg]: bruto/neto – 210 / 180 kg Dodatno: Codjudi Uzjpfx Adiorf 2 rezili žage M42 5 l Emulsol Magnetni zbiralnik ostankov ZW580

Stanje: novo, Premer reza 235 mm Dimenzije tračne žage 2645 x 27 x 0,9 mm Širina reza 280 x 190 mm Hitrost rezanja 45/90 m/min Zmogljivost rezanja pri 60° okroglo 120 mm Crodpfx Asp Scqyedisf Zmogljivost rezanja pri 60° kvadratno 120 mm Zmogljivost rezanja pri 45° okroglo 190 mm Zmogljivost rezanja pri 45° kvadratno 170 mm Priključna napetost 400 Voltov Skupna potrebna moč 1,1 kW Teža stroja cca. 290 kg Dimenzije D x Š x V 1,2 x 0,8 x 1,2 m Dvojno poševna tračna žaga -Kosi pod kotom do 60° levo in 45° desno -Hitra vpenjalna naprava primeža -Kontrola napetosti traku -Električni avtomatski hladilni sistem

Stanje: novo, Cutting Range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° right: 230 mm square 45° right: 220 x 220 mm flat 45° right: 230 x 150 mm round 60° right: 140 mm square 60° right: 140 x 140 mm round 45° left: 200 mm square 45° left: 175 x 175 mm flat 45° left: 220 x 150 mm Cutting Speed: 40 / 80 m/min Saw Blade: 2925 x 27 x 0.9 mm Working Height: 975 mm Coolant Pump: 100 W Saw Motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double miter bandsaw with swiveling saw bow from left -45° to right +60° - Ideal for cutting pipes, profile material, and solid stock made of stainless steel, iron, etc., for industrial/commercial use - Generously sized cast saw arm for low-vibration operation - Two blade speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder Cedpfx Aeiqt Rledisrf - Quick-release vise for fast and easy clamping of the workpiece - Precise, adjustable blade guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of Delivery: - Bi-metal saw blade 2925 x 27 x 0.9 mm - Blade tension adjustable via pressure gauge - Carbide blade guides - Quick-release vise - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shutdown at end of cut - Base frame