Stroj za površinsko brušenje

Minini 2000 613A

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Nwsdpfx Adevdal Ajyob Feed rate Z-axis 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), Leto izdelave: 1992, 1 used surface grinding machine Manufacturer: ELB Model: SUPER - RUBIN 024 CNC Year of manufacture: 1992 Travel paths: Grinding length: 600 mm Grinding width: 275 mm Nsdoi Ra Tyjpfx Adyswb Grinding height: 375 mm Table clamping surface: 900 x 300 mm Table load capacity: 300 kg Vertical feed: max. 300 mm/min Cross feed: max. 2,000 mm/min Control system: UNICON Grinding wheels are included in the scope of delivery, see photos.

Leto izdelave: 2015, Stanje: rabljeno, Dimensions (L x W x H): 700 x 655 x 1,400 mm Filter surface: / m² Number of filter bags: 1 pc. Number of chip collection bags: 1 pc. Nodpjgr Rkxjfx Adyswb Weight: 140 kg with control box and start-stop sensor

Stanje: zelo dobro (rabljeno), Several 150 m³ steel storage tanks (firefighting water tanks), installed underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Nsdpfjfnh Tgex Adyjwb Weight: approx. 28,000 kg The tanks are retrofitted as underground firefighting water tanks according to DIN 14230: Each tank is equipped with a firefighting water suction connection according to DIN 14244, featuring a mounted fire brigade coupling/fixed coupling A in accordance with DIN 14319, version Form B, without a dip tube. Additionally, the tank features a vent flange connection (NW/DN 100) with cap, with an overall length of approx. 1,300 mm, suitable for 800 mm earth cover and 500 mm above ground level. - The tanks are emptied, cleaned, and factory-coated on the outside with bitumen by us. - Upon request, we can provide the tank with a full internal bitumen-based corrosion-resistant coating or epoxy resin internal coating. Cost-effective delivery is possible with our own truck. Simply let us know the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. If you require further information, please call us or send an e-mail to b.barth (at) barth-tank.de

Stanje: dober (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 13639, Krmiljenje Heidenhain Pomik X: 1.200 mm Pomik Y: 800 mm Pomik Z: 500 mm Glavno vreteno: Hitrost: 16.000 min⁻¹ (vrt/min) Pogonska moč glavnega vretena: 17 kW Vpenjalo orodja: tip HSK63 Premer vretena pri prednjem ležaju: 70 mm Nadgrajen menjalec orodja, kapaciteta: 100 orodij Rotacijska miza (Swing round table): Premer rotacijske mize: 800 mm Zasuk osi A: -15 / +97° Rotacija osi C: 360° Maks. obremenitev mize: pribl. 1.000 kg Maks. premer orodja: 80 mm Maks. premer orodja s praznim sosednjim mestom: 125 mm Nwodpfeinh Rqex Adyjb Maks. dolžina orodja: 300 mm Maks. teža orodja: 8 kg Pomiki: Hitri pomik (X / Y / Z): 30 m/min Skupna priključna moč: 31 kVA Teža stroja: 15 t Prostorske zahteve: pribl. 6,0 x 5,0 x 3,6 m Ostala oprema: - Dokumentacija - Odvajač odrezkov - Elektronska kompenzacija toplotnih raztezkov za osi Y in Z

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Nwodpfx Adjwbh Ifsysb Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.

Stanje: novo, Capacity: 300 kg Max. workpiece size: 500 x 200 x 20 mm Total workpiece weight: 200 kg Max. workpiece weight: 15 kg per piece Rotational speed: 22 rpm Filling level: 40–50% Nodpfsu Uu T Rox Adyowb Color: Blue RAL 5015 Opening: 625 x 270 mm Total power requirement: 1.5 kW Machine weight: approx. 650 kg Dimensions (L x W x H): 1 x 1.7 x 1.29 m New deburring or scouring drum (deburring machine) designed for safe and efficient deburring of workpieces. 6-sided drum lined with 36 mm wear-resistant, vulcanized rubber. Roll-up cover for protection against the rotating drum, robust construction, easy operation. Control panel with timer, hour counter, main and emergency stop switches, and signal light. The maximum fill level is 40% of the drum volume, corresponding to 300 kg (200 kg workpieces + 100 kg deburring media such as manganese steel balls or cast iron pentagons). These are available from Sideros: manganese steel balls €400 per 100 kg & cast iron pentagons €950 per 100 kg. Dust extraction unit Sideros ECO A (see photo 8) optionally available for €1,900 + VAT. The manufacturer recommends sending 100 kg of sample material for test deburring to the Italian plant before ordering. Otherwise, the manufacturer accepts no responsibility for the deburring results. Warranty: 12 months for single-shift operation. When replacement parts are supplied, defective parts must be returned. Downtime of the machine is not covered. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, Technical Data Brand: KENT Model: VK 1600MC Year: 2006 Serial No.: 2200139 CNC: FANUC 18 iMD Location: Tabaza (Asturias) Table Dimensions Table Surface: 1700 x 810 mm T-slots: 22 x 5 x 160 mm Maximum Table Load: 2,000 kg Travel Longitudinal Travel X: 1600 mm Transversal Travel Y: 815 mm Vertical Travel Z: 815 mm Spindle nose to table distance: 220 ~ 1035 mm Spindle nose to column distance: 865 mm Spindle Taper: BT50 Spindle speed: 30 – 6,000 rpm ZF gearbox (2 ranges): Yes Nsdpfxeqwyzfj Adyswb Max. Tool Weight: 15 kg Max. Tool Size (Diameter x Length): 125 x 300 mm ATC Max. Tool Size: Ø125 x L250 mm Max. Tool Weight: 15 kg Number of Tools: 32 Feed Rates Working Feed Rate: 1 – 10,000 mm/min Rapid Traverse (X / Y / Z): 18/18/18 m/min Motor Spindle Motor (Max. Power 30 min): 15/18.5 kW Axis Drives X, Y, Z: 5.5 / 5.5 / 5.5 kW Coolant Pump CTS: One air & two coolants – 4 bar + 6 bar / 20 bar Weight and Dimensions Machine Weight: 16,150 kg Machine Dimensions: 4,488 x 3,448 x 3,250 mm Footprint: 5,000 x 3,500 mm

Stanje: rabljeno, Leto izdelave: 2002, x-axis travel 3200 mm y-axis travel 800 mm z-axis travel 600 mm Spindle taper SK40 Spindle speed 50 – 12,000 rpm Number of tool positions in magazine 30 pcs Table clamping surface 3900 x 750 mm Rapid traverse rates x/y/z 12/12/12 m/min Total power requirement 29 kW Machine weight approx. 15,000 kg Space requirements approx. 7200 x 3500 x 3100 mm CNC travelling column machining center Hedelius Equipment: - Chip conveyor - 30-position automatic tool changer - Heidenhain CNC control iTNC 530i - High-pressure band filter system - Through-spindle coolant (IKZ) 15 bar - SK40 tool holders - Operating manual Nodpfjv S Irtsx Adyowb The following repairs were carried out in 07/2022: - Linear guides on X-axis - Various pneumatic hoses - Safety glass on loading doors - Several illuminated pushbuttons - Safety actuators for doors - X-axis cover (lamella type) - Through-spindle coolant filters (4 pcs) - Filter cabinet - Timing belts for Z and Y axes - Door wipers with damper - Hoses for external cooling, spindle cooling and spray guns (2 guns) - Set of nozzles for external cooling - 2x "Falkenbalg" for Y-axis - 1 set of door rollers with rail (6 meters) - 1x Klüber grease with taper extractor

Stanje: rabljeno, Leto izdelave: 2007, Leto izdelave: 2007. Stroj: Hardinge Bridgeport XR760 s krmiljem Fanuc 18iM. Vreteno z 12.000 obr/min s centralnim hlajenjem skozi vreteno, hitra avtomatska menjava 30 orodij (ATC) in transporter ostružkov. Pomiki: X-os 760 mm, Y-os 610 mm, Z-os 610 mm. Delovna površina mize: 1.000 x 600 mm, max. obremenitev mize: 900 kg. Število T-utorov: 5, dimenzija T-utora: 18 mm, razmak med T-utori: 100 mm. Razdalja med površino mize in čelom vretena: 100–710 mm. Podajalne hitrosti (X/Y): 0,0025–20 m/min, Z-os: 0,0025–20 m/min. Premer in korak krogličnih vreten (X/Y): 45 x 16 mm, Z-os 45 x 12 mm. Vreteno: 12.000 obr/min, motor Fanuc (S6 40%) 25 kW, navor (S6 40%) 159,2 Nm. Vretenasti stožec: BT 40. Kapaciteta magazina: 30 orodij. Max. premer orodja 125 mm (sosednji žep 80 mm), max. dolžina orodja: 300 mm, max. masa orodja: 7 kg. Upravljanje in odstranjevanje ostružkov: transporter, rezervoar tekočine za hlajenje 355 l, prha mize, pištola za pranje, zračni razpihovalnik rezalnika, centralno hlajenje skozi vreteno. Natančnost po ISO 230-2: pozicioniranje A 0,010 mm, ponovljivost R 0,004 mm. Dimenzije stroja (ŠxG): 2.528 x 3.000 mm. Električni priklop: trifazni tok, 50/60 Hz, moč 25 kVA, napetost po naročilu. Komprimiran zrak: tlak/pretok 4,9 cfm. Pretok hladilne tekočine pri orodju: 160 l/min. Tlak hlajenja skozi vreteno: 20 bar (standardno). Prha: 140 l/min. Krmilje: Fanuc 18iM Specifikacije: Pomik X 760 mm | Y 610 mm | Z 610 mm | 12.000 obr/min | BT40 Oprema: Hitra avtomatska menjava 30 orodij in transporter ostružkov Naziv stroja: Hardinge Bridgeport XR760 Hitrost hitrih pomikov: (auto način X/Y) 43 m/min, (auto način Z) 36 m/min. Njdpfx Aevkwk Ajdyswb