Rezkalni stroj za orodje

Mikron WF 3 DP

Stanje: zelo dobro (rabljeno), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling Spindle Drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step increment: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor Torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travel distances Longitudinal travel of the clamping table (X axis): Automatic: 400 mm Cross travel of the clamping table (Y axis): Automatic: 400 mm Kedpjlnfggjfx Agksdw Vertical travel of the clamping table (Z axis): Automatic: 385 mm No guarantee for the correctness, completeness or up-to-dateness of the information provided.

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band Ksdpfefgyicsx Agkjdw 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 956.71.80.274, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 400 mm, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 400 mm, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, The machine shown is in excellent condition and ready for immediate use. No heavy roughing operations have ever been performed with this machine. It is sold together with a vise and includes a tool cabinet with the contents as shown. Additionally, it comes with 2 sets of ground parallels as well as approximately 80 milling cutters, all in usable condition (partially lightly used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum. Kedpfxewnq Sge Agksdw

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 used tool milling machine Manufacturer: Mikron Model: WF 2/3 DP Equipped with Heidenhain Type 135 path control Travels (X/Y/Z): 400/410/400 mm Clamping table surface: 800 x 450 mm Spindle speed range: 30 – 2240 rpm Feed rates: 1 - 750 mm/min Rapid traverse: 2000 mm/min Kdjdpfxjv N Dzfj Agkow Tool holder: ISO 40 Machine weight approx.: 1.4 t Required space approx.: 2.1 x 1.6 x 2.2 m

Stanje: rabljeno, Swing over bed: 250 mm Swing over cross slide: . mm Distance between centers: approx. 400 mm Center height: approx. 125 mm Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions: approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, with drilling and turning jaws; Kdodpfx Ajwa Dz Esgksw Collet chuck with collets 1-20 mm in 1 mm increments; Multifix size A with 3 tool holders; Chuck guard with safety interlock

Stanje: rabljeno, Leto izdelave: 1980, x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Infinitely variable feeds: 1 - 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Kdsdpfecxxq Djx Agkow Equipped with Heidenhain TNC 131 control, swiveling device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping for all axes, the working axis is automatically released, and for manual operation all axes can be released.

Stanje: rabljeno, Leto izdelave: 1988, x-travel 310 mm y-travel 340 mm Kdsdjt Hxatjpfx Agksw z-travel 170 mm Total power requirement 2.5 kW Machine weight approx. 900 kg Space requirement approx. m M A C M O N Universal tool milling machine with HEIDENHAIN 3-axis digital readout, type M 100 D Year of manufacture 1988 Serial no. 1536 _____ Table travel: longitudinal motorized/manual 290 / 310 mm vertical motorized/manual 310 / 340 mm Cross traverse (manual) 170 mm Fixed angle table 215 x 600 mm Swivel vertical head 360° Vertical head quill travel 70 mm Clearance under spindle 350 mm - Projection of the vertical spindle approx. 100 - 320 mm Spindle taper SK 40 21 vertical spindle speeds 50 - 2,500 rpm horizontal 40 – 2,000 rpm Feed ranges in steps 9 – 450 mm/min. Spindle drive 2.2 kW Total power 2.5 kW - 380 V - 50 Hz Weight 900 kg Accessories / Special features • 3-axis HEIDENHAIN digital readout • Selector knobs for feed and spindle speeds in modern design (no levers) • Fixed angle table approx. 215 x 600 mounted • Machine lamp, swiveling chip guard • Equipped with a sliding vertical milling head ISO 40, quill stroke 70 mm • Control cabinet mounted on machine, built-in coolant unit, chip tray, various milling arbors, etc. Condition: good – ready for demonstration, ideal for training workshops/vocational training Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 1991, 1 rabljeni univerzalni orodni rezkalni stroj Proizvajalec: Deckel Tip: FP 1 z aktivnim digitalnim prikazovalnikom Heidenhain Leto izdelave: 1991 Tehnični podatki: X-hod: 300 mm Y-hod: 160 mm Z-hod: 340 mm Vpenjalo vretena: SK 40 Vertikalni hod pinole: 60 mm Velikost mize: 600x210 mm Hitrosti vretena: 40–2000 vrt/min Teža stroja cca: 1 t Priključna moč: 7,5 kW Prostorske potrebe cca: 1,6x1,3x1,8 m Opremljen z: fiksno mizo nagibno mizo univerzalnim delilnikom Kedpfx Asw Sdmdogkedw različnimi držali za orodje horizontalnim naslonom

Stanje: rabljeno, Leto izdelave: 1982, številka stroja/vozila: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Ksdpfx Ajiqkc Ijgkodw Year of manufacture: 1982, 2 gearbox stages 1400/2800 rpm, Table size: 860x240 mm, 3 T-slots 14 mm, spindle taper SK30, Travel distances: X/Y/Z = 450/200/430 mm, spindle speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overarm arbor supports, 1 collet chuck with key, 1 machine vice with crank handle.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 290 mm, Year of manufacture: 1986 Travel distances: X = 300 mm Y = 160 mm Z = 290 mm Equipment: - Standard accessories - Vertical milling head, ISO 40/ 20x2 - Fixed angle table 210 x 600 mm, NEW! - Retrofitted safety guard for milling spindle, electrically interlocked, NEW! - 3-axis active digital readout (TNC113) - Coolant system - Machine lamp - Machine feet Kdedpjwgafyjfx Agksw - Documentation Condition: Good, mechanics and control system workshop-tested