Rezkalni stroj

Mikron UM600

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 11.320 h, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, moč vretenovega motorja: 15.000 W, teža orodja: 13.000 g, število osi: 3, This 3-axis MIKRON UM600 TNC 410/426 was manufactured in 1998. It offers a maximum longitudinal travel of 600 mm, cross travel of 500 mm, and vertical travel of 450 mm. The machine is equipped with a robust table size of 520 x 900 mm and a maximum table load capacity of 400 kg. If you are looking for high-quality machining capabilities, consider the MIKRON UM600 TNC 410/426 vertical machining center we have for sale. Contact us for further details. • Machining spindles (vertical and horizontal) • Drive power (44% duty cycle): 15 kW • Drive power (100% duty cycle): 6 kW • Motor torque: 50 Nm • Max. spindle torque (44% duty cycle): 800 Nm • Number of gear steps: 4 • Max. tool diameter: 130 mm • Included options: in-machine measurement and high-speed spindle Blodpfx Aey D Thvecmoh • Feed drives (AC) • Programmable feedrate X/Y: 0 - 15,000 mm/min • Programmable feedrate Z: 0 - 12,000 mm/min • Rapid traverse X/Y: 15,000 mm/min • Rapid traverse Z: 12,000 mm/min • Coolant system • Tank capacity: 150 l • Flow rate: approx. 20 l/min • Clamping table • Table size: 520 × 900 mm • Number of T-slots: 4 • T-slot width: 14 H7 • Tool changer TCD 44 • Tool positions: 22 • Tool diameter: 80 / 130 mm • Max. tool length: 350 mm • Max. tool weight of the TCD 44 changer: 6 kg • Max. workpiece weight in rotary magazine: 200 kg • Chip-to-chip time: 20-25 s • Tool change time: 12-16 s • Electrical connection • Total installed power rating: 15.8 kW • Useful/connected power: 12.3 kW • Operating voltage/frequency: 3 × 400 V / 50 Hz Technical Specification Taper size SK 40

Stanje: kot nova (razstavni stroj), Various designs available, such as round, hexagonal, or square, and in smooth, cross-serrated, or both longitudinal and cross-serrated versions. A current list of available as-new and new clamping heads SK32/SK42/SK52/SK65/SK80/SK100 can be found on our homepage. Bledpjh Dmamefx Acmjh We look forward to your inquiry. STALEX Werkzeugmaschinen GmbH

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Maximum table load: 300 kg Control system: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Installation dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be arranged Europe-wide, upon request and for an additional fee. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be pleased to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? Bljdpfxjwx Naqj Acmoh For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 1997, x-hod 600 mm y-hod 500 mm z-hod 450 mm Krmiljenje Heidenhain TNC 426 PB Orodjavni menjalnik z 22 mesti Orodna pritrditev SK40 Hitrost vrtenja 5-6.300 min⁻¹ Velikost mize 900 x 530 mm Obremenitev mize 400 kg Skupna priključna moč 9 kW Teža stroja ca. 3550 kg Prostorske zahteve ca. 2,2 x 2,7 x 2,05 m 3-osni vertikalni obdelovalni center MIKRON UM 600, letnik 1997 Bedpfxsykb Hls Acmjlh Tehnično v vrhunskem stanju, vse vodila so na novo postrgana. Vreteno je bilo na novo uležajeno, od takrat le 262 ur v uporabi. Novi močnostni del za pogon vretena je nameščen. Dodatki: Merilni sistem Heidenhain TS 642 2 skoraj nova vpenjalna primeža Orodni nosilci SK40

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Speed range: 0–600 and 600–4000 rpm, stepless Feed rate: 1 – 3000 mm/min Rapid traverse: 6 m/min Clamping surface of the table: 1100 x 600 mm Table feed: 1 – 3000 mm/min, stepless Bedpfx Asu Nda Eocmslh Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH) approx.: 2.9 x 2.2 x 2.5 m Additional technical data: - Vertical table adjustment (Z-axis): 500 mm - Spindle head overhang, min./max.: 200 / 750 mm Equipment: - Coolant tank with pump - Handheld control device - Heidenhain linear measuring system

Stanje: dober (rabljeno), Leto izdelave: 1996, Travel X/Y/Z 600/500/450 mm, HEIDENHAIN TNC 410PA control, spindle power 9 kW, spindle speeds 5-6300 rpm, taper SK40, table size 530x900 mm, max. table load 400 kg, tool magazine with 22 positions, dimensions 2200x2700x2050 mm, approx. 3550 kg, accessories: Renishaw tool measurement, 4th axis TRIAG rotary table with clamping devices, wireless data transmission, software updated, flat screen, tool holders, operator manuals Bjdpfx Asqagugocmslh

Stanje: dober (rabljeno), Leto izdelave: 2014, Technische Daten sind auf den Fotos ersichtlich. Die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Bodsufp Svopfx Acmelh

Stanje: zelo dobro (rabljeno), obratovalne ure: 8.064 h, Znamka: LAGUN Model: GBM-22E Tip: CNC 5 OSI Krmilnik: HEIDENHAIN 530 Dimenzije mize: 2.200 x 1.000 mm Št. in širina T utorov: 7 x 22 mm Razdalja med utori: 140 mm Hodi osi (X, Y, Z): 2.000 x 1.200 x 1.000 mm Model glave: Avtomatska Vrtljaji glave: 4.000 rpm Bodpfx Asyg R Abscmjlh Stožec: ISO 50 DIN 2080 Moč motorja: 28 kW Neomejena nastavitev hitrosti: 50➗ 4.000 Obseg hitrosti: 2 Hitri pomiki: 10.000 mm/min Teža stroja: 15 t Elektronski volan: Da Delovne ure: Stroj v pogonu: 22.924 h Krmilje vklopljeno: 23.132 h Avtomatski cikel: 8.064 h

Stanje: dober (rabljeno), Leto izdelave: 2008, dolžina podajanja os X: 400 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 400 mm, Heidenhain TNC 124 control Quill electronic handwheel coolant system Technical data: Longitudinal travel (X-axis): 400 mm Cross travel (Y-axis): 250 mm Vertical travel (Z-axis): 400 mm Table clamping area: 600 x 320 mm Spindle taper: SK40 Spindle speed range: 30–6300 rpm Bsdorb A Tcopfx Acmolh Feed rate x, y, z: 10, 10, 8 m/min Total drive capacity: 6.5 kW Weight approx.: 1200 kg Technical data, accessories, and description of the machine are non-binding.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Bridgeport VMC 600 ECO Machining Centre Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of Manufacture: 2012, in excellent original condition The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE-compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control: HEIDENHAIN ITNC 530 Traverse paths (X/Y/Z): 600/410/520 mm Rapid traverse (X/Y/Z-axis): 40/40/20 m/min Worktable dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeatability: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the Machine: For sale is a Bridgeport VMC 600 EC machining centre equipped with a Heidenhain ITNC 530 control. This machining centre is in very good original condition. It comes from a company where it was used only lightly for training purposes. The control is very user-friendly. The linear guides are regularly lubricated by the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power at our facility. Bodpsxtxk Sofx Acmelh Further milling machines from well-known manufacturers can be found on our website.