MIKRON UM 600

MIKRON UM 600

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 11.320 h, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, moč vretenovega motorja: 15.000 W, teža orodja: 13.000 g, število osi: 3, This 3-axis MIKRON UM600 TNC 410/426 was manufactured in 1998. It offers a maximum longitudinal travel of 600 mm, cross travel of 500 mm, and vertical travel of 450 mm. The machine is equipped with a robust table size of 520 x 900 mm and a maximum table load capacity of 400 kg. If you are looking for high-quality machining capabilities, consider the MIKRON UM600 TNC 410/426 vertical machining center we have for sale. Contact us for further details. • Machining spindles (vertical and horizontal) • Drive power (44% duty cycle): 15 kW • Drive power (100% duty cycle): 6 kW • Motor torque: 50 Nm • Max. spindle torque (44% duty cycle): 800 Nm • Number of gear steps: 4 • Max. tool diameter: 130 mm • Included options: in-machine measurement and high-speed spindle • Feed drives (AC) • Programmable feedrate X/Y: 0 - 15,000 mm/min • Programmable feedrate Z: 0 - 12,000 mm/min • Rapid traverse X/Y: 15,000 mm/min • Rapid traverse Z: 12,000 mm/min • Coolant system • Tank capacity: 150 l • Flow rate: approx. 20 l/min • Clamping table • Table size: 520 × 900 mm • Number of T-slots: 4 • T-slot width: 14 H7 • Tool changer TCD 44 • Tool positions: 22 • Tool diameter: 80 / 130 mm • Max. tool length: 350 mm • Max. tool weight of the TCD 44 changer: 6 kg • Max. workpiece weight in rotary magazine: 200 kg • Chip-to-chip time: 20-25 s • Tool change time: 12-16 s Codpfxoy D Thvs Ahxogt • Electrical connection • Total installed power rating: 15.8 kW • Useful/connected power: 12.3 kW • Operating voltage/frequency: 3 × 400 V / 50 Hz Technical Specification Taper size SK 40

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Heidenhain TNC 426 control system Travel paths X/Y/Z: 600/450/450 mm Spindle speed: 10,000 rpm Cjdpfx Ahjyrirroxegt Tool magazine for 30 tools, SK 40 taper

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Maximum table load: 300 kg Control system: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Installation dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be arranged Europe-wide, upon request and for an additional fee. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be pleased to assist you. Trade-in or exchange possible! Cgjdpfxewx Naqe Ahxet Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 1996, Travel X/Y/Z 600/500/450 mm, HEIDENHAIN TNC 410PA control, spindle power 9 kW, spindle speeds 5-6300 rpm, taper SK40, table size 530x900 mm, max. table load 400 kg, tool magazine with 22 positions, dimensions 2200x2700x2050 mm, approx. 3550 kg, accessories: Renishaw tool measurement, 4th axis TRIAG rotary table with clamping devices, wireless data transmission, software updated, flat screen, tool holders, operator manuals Codpfx Aoqagugohxjgt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 12.959 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 12.000 obr/min, skupna višina: 2.450 mm, skupna širina: 2.400 mm, skupna dolžina: 3.100 mm, širina mize: 630 mm, dolžina mize: 630 mm, obremenitev mize: 350 kg, skupna masa: 6.800 kg, Kunzmann WF 650 5-Axis Machining Center, Simultaneous (2009) Manufacturer: Kunzmann Model: WF 650 5-Axis Machining Center, Simultaneous Year of Manufacture: 2007 Commissioning: 2009 Condition: Used, very good Machine ON hours: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software package 1 for iTNC 530 X-axis: 650 mm Y-axis: 500 mm Z-axis: 450 mm Swiveling range of vertical milling head: -5° to +95° NC rotary table diameter: 630 mm Table load capacity: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 tools ICU: Tool clamp with coolant supply and air blast device through the spindle, delivery rate 25 l/min at 40 bar Selectable water/air through the spindle Paper band filter CNC-controlled milling head (B-axis) Cgjdexwl T Uepfx Ahxjt Preparation kit for probe TS 640 3D probe with infrared transmission Dimensions (LxWxH) approx.: 3.1 x 2.4 x 2.45 m Weight approx.: 6,800 kg Coolant system (LxWxH) approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine levelling feet – Machine lamp

Stanje: rabljeno, Leto izdelave: 1997, x-hod 600 mm y-hod 500 mm Cedpeykb Hljfx Ahxjgt z-hod 450 mm Krmiljenje Heidenhain TNC 426 PB Orodjavni menjalnik z 22 mesti Orodna pritrditev SK40 Hitrost vrtenja 5-6.300 min⁻¹ Velikost mize 900 x 530 mm Obremenitev mize 400 kg Skupna priključna moč 9 kW Teža stroja ca. 3550 kg Prostorske zahteve ca. 2,2 x 2,7 x 2,05 m 3-osni vertikalni obdelovalni center MIKRON UM 600, letnik 1997 Tehnično v vrhunskem stanju, vse vodila so na novo postrgana. Vreteno je bilo na novo uležajeno, od takrat le 262 ur v uporabi. Novi močnostni del za pogon vretena je nameščen. Dodatki: Merilni sistem Heidenhain TS 642 2 skoraj nova vpenjalna primeža Orodni nosilci SK40

Leto izdelave: 1988, stanje: rabljeno, številka stroja/vozila: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Cutting capacity at 90° round: 130 mm Cutting capacity at 90° square: 120 x 120 mm Mitre cutting capacity at 45° round: 130 mm Mitre cutting capacity at 45° square: 110 x 110 mm Cedpfx Aez N Amohxsgt Cutting speeds: 11 and 22 m/min Feed rates: 670 mm/min Cut-off length: with automatic feed up to 1200 mm Electrical connection: 380 V, approx. 4 kVA Saw drive: 1.6/2.5 kW Space requirement: 1800 x 3800 x 2000 mm Weight: approx. 1800 kg

Stanje: rabljeno, Leto izdelave: 2006, Verigalni pomik - x 500 mm Verigalni pomik - y 450 mm Verigalni pomik - z 400 mm c-os 360° b-os 0 - 108° Cedpsyvkuqofx Ahxsgt Vpenjalna površina: 500 x 380 mm Krmiljenje HEIDENHAIN - iTNC530 Hitrost vretena 20 - 18.000 min⁻¹ Število mest v menjalniku orodij 60 Vpenjalo orodja HSK 63 5-osni simultani obdelovalni center | DMG - DMU 50 eVo linear z NC zasučno-rotacijsko mizo, 60-kratnim menjalnikom orodij, dvojnim prijemalom, SKZ (40 bar) in transporterjem ostružkov. Dodatna oprema: - Heidenhain TS 640 infrardeči merilni tipalnik - Lasersko merjenje orodja - Trakasti filtrirni sistem Stroj je v vzdrževanem stanju. Za več tehničnih podrobnosti glejte ponudbo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current standards. Technical Data: - Heidenhain TNC 320 retrofit - Travel axes: X - 500 mm, Y - 380 mm, Z - 350 mm - Spindle taper: SK 40 - Vertical quill stroke: 50 mm - Spindle speed range: 20–3,150 rpm, stepless Cgjdoxw N S Ispfx Ahxjt - Feed rate: 1–3,000 mm/min - Rapid traverse: 5 m/min - Table load capacity: 250 kg - Total power requirement: 11.3 kW - Machine weight: approx. 2 t - Handheld control unit - Safety enclosure Inspection and test run under power on-site are of course possible. We are also happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhauling - Automation of DMG machines and other renowned manufacturers. We are your partner! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us throughout the entire process.

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. Cjdpfxsv Tpxqe Ahxogt - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike - Delovanje: ročno upravljanje (brez avtomatskega načina) - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 - Pogon: mehanski - Največja delovna širina: 2020 mm - Največja debelina pločevine: 4 mm - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg