Časnikarstvo zavora vpenjalni umre

MF- tolls TRUMPF, AMADA, BYSTRONIC, LVD

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Cjdpfx Afsd Ev Uponspw Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Cpjdpfenah Taex Afnow Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Cpjdpeq D Dzlsfx Afnow Press force: 220 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation height: 600 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2555 mm Machine length: 3730 mm Machine width: 2290 mm Overall height: 3055 mm Table height: 820 mm Motor power: 22 kW Oil tank capacity: 300 l Machine weight: 11,500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Ram double-guided, stable and precise - Robust backgauge, double-guided - Manually adjustable backgauge fingers, double-guided on linear rail - Movable front support arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Manual crowning - Foot pedal with emergency stop - 380 V, 50–60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T control - Fiessler AKAS 2M laser finger guard - FPSC Safety PLC (manual) - X-R axis with servomotors - CNC crowning for high bending accuracy - 2 additional backgauge fingers Other working lengths and capacities available with the appropriate accessories!

Stanje: rabljeno, Rotary Vane Vacuum Pump - Oil-lubricated Manufacturer: Leybold Model: Sogevac SV 200 Cat. No.: 10927 Condition: Fully Refurbished Warranty: 12 Months Includes: Oil filling (mineral oil), operating manual with spare parts list Cpsdpfx Ascnyy Hsfnsw Voltage: 50/60Hz 230-400/460V Motor Power: 4 kW Nominal Pumping Speed: approx. 200 m³/h Ultimate Pressure without gas ballast: approx. 0.08 mbar Delivery time: ex stock

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2016, potovalna razdalja osi X: 6.500 mm, pomik osi Y: 1.800 mm, pomik po osi Z: 1.300 mm, dolžina podajanja os X: 10.000 mm, dolžina pomika po osi Y: 10.000 mm, dolžina podajanja os Z: 10.000 mm, hitro pomikanje X-os: 35 m/min, hitri pomik os Y: 35 m/min, hitri pomik na osi Z: 35 m/min, največja hitrost vretena: 7.000 obr/min, hitrost vretena (min.): 20 obr/min, dolžina mize: 8.000 mm, širina mize: 1.100 mm, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of Manufacture: 2016 Capabilities / Travel Range: Longitudinal (X): mm 6,500 Vertical (Y): mm 1,800 Cross (Z): mm 1,300 Table Size: Length: mm 8,000 Width: mm 1,100 Number of T-slots on the Table Surface: units: 7 Width of T-slots: mm 22 Distance between slots: mm 140 Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool Holder: ISO 50, DIN 69871 AD Pull Stud: DIN 69872 Type A Main Drive: Drive Power: 100% DC KW43 Spindle Speed Range: Spindle Speed max.: min-1 20 - 7,000 Torque: Nm 900 Feed Rates: X, Y, and Z Axis mm/min 2 – 10,000 Max. Rapid Traverse Rate: X, Y, and Z Axis mm/min 35,000 Footprint SLP8000: (without enclosure) m 13.0 x 4.5 Overall Height: m approx. 4.4 Weight: kg approx. 34,000 Heidenhain TNC 640 HSCI Automatic Milling Head, Diagonal H207 Adapter Angular Milling Head SK50 with Hirth Coupling Automatic Tool Changer, 60 magazine positions Chip Conveyor Preparation / Integration for NC Rotary Table Adaptive Control Codpfx Afoxvx Amonjpw ACCURA HEADS Coolant System 2 RepairFIT is our proven solution for an efficient entry into our product lines. The machines available in this product line are sourced by us through a rigorous selection process and subjected to comprehensive inspection (deep-dive check). After intensive cleaning, any detected obvious defects and faults are professionally repaired by our expert service team.

Stanje: rabljeno, Length: 1800 mm Width: 1200 mm Machine weight approx.: 1.6 t Space requirement approx.: 1.8 x 1.2 x 0.4 m Cedpfx Afjcxxu Dsnepw - Measuring plate with 5 special feet - Good condition

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Cpjdpfjd N H A Nsx Afnew Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Stanje: novo, Leto izdelave: 2025, - TFON Sistem zaobljenja ivica i površinske dekontaminacije. - Kompatibilnost materijala: Pogodno za nisko-ugljenični čelik, aluminijum i nerđajući čelik. - Radni spektar debljine: Obrađuje materijale debljine od 0 do 120 mm. - Zaobljenje ivica: Obezbeđuje zaobljenje ivica radijusa 2, za glatke i sigurne ivice koje unapređuju izgled i funkcionalnost izratka. - Precizna kontrola: Opremljen Siemens automatskim sistemom za preciznu i doslednu kontrolu tokom celokupnog procesa. - Nezavisne stanice: Više procesnih stanica omogućava raznovrsne operacije – različiti zahvati mogu se izvoditi istovremeno ili uzastopno. - Opcije radne površine: Dostupne dimenzije radnih stolova: 650 mm, 1000 mm ili 1300 mm, u zavisnosti od potreba proizvodnje. - Tipovi stolova: Fleksibilne konfiguracije uključuju magnetne, vakuumske ili magnetno-vakuumske stolove, što omogućava sigurno fiksiranje raznih materijala i veličina delova. - Plazma i kiseonička tehnologija: Koristi naprednu plazma i kiseoničku tehnologiju za efikasno uklanjanje debelih strugotina i šljake nakon sečenja, omogućavajući čistiju i glatkiju površinu. - Površinska dekontaminacija: Efikasno uklanja površinske nečistoće kao što su rđa, oksid ili skala, pripremajući delove za dalje procese. - Zaobljenje ivica za potrebe zaštitnog premaza: Savršeno priprema površinu za farbanje i nanošenje zaštitnih premaza, obezbeđujući ravnomernu i besprekornu završnu obradu. - Industrijske primene: Idealan za centre za obradu čelika, energetiku, rudarstvo, građevinsku i automobilsku industriju – prilagođena rešenja za zahtevne primene. - Ujednačeni rezultati: Šest lamelnih točkova radi sinhronizovano, obezbeđujući konstantne, jednako zaobljene ivice na svakom delu. Cjdpfx Aehq A T Uefnepw - Pneumatski sistem oscilovanja: Produžava vek trajanja brusnih traka minimiziranjem habanja i održavanjem stalnog kvaliteta obrade tokom vremena.

Stanje: rabljeno, Leto izdelave: 1980, Premer žaginega lista: 380 mm Pnevmatska pritrditev: da Št. stroja: 46893 Teža stroja: ca. 1,3 t +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega ni mogoče prikazati stroja pod električnim tokom niti izdelava videoposnetka. Naš oglas vsebuje najpomembnejše fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. Cjdod N Sm Dspfx Afnspw +++++

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 48.274 h, število osi: 6, stiskalna sila: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electrohydraulic upper drive, and 2D graphic control DA 69 on a 10.4" colour display. The machine is equipped with a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending operations. Regularly serviced as part of a TRUMPF maintenance contract. Contact us for further details on this machine. • Free column gap: 3680 mm • Installation height: 535 mm • Control: 2D graphic control DA 69 on window with 10.4” colour screen • Electrical equipment: for 400 V / 50 Hz three-phase current Cedex D D Hyopfx Afnspw • The machine has undergone annual maintenance • Maintenance contract in place • Rigid machine frame, welded all-steel construction • Press beam with high bending resistance • High-dynamic direct electromechanical drive (torque motor) • Electrohydraulic upper drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3 axes (X1, R1, Z1) and 6-axis options • Rack-and-pinion drive for X and R axes • Safe, front-accessible movement of backgauge fingers • Upper tool holder system Modufix, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Integrated operating system Windows XPe, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network capable, teleservice via modem • Control cabinet air conditioning • Side-mounted safety doors and rear safety cover • 2-button foot switch for standing or seated operation • LED lighting in rear work area • LED lighting in front work area • Ergonomics package: comfortable front work surface and footrest • 2 storage consoles and 2 document compartments • 24,000 operating hours, brakes renewed in 2024 • TRUMPF tools maintained, all within tolerance Additional equipment • Backgauge system with 5 axes and control cabinet cooling • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC crowning • BendGuard safety device • Foot switch • 2x front support consoles • 1x bending aid with 900 mm park position • Table extension for base table / auxiliary table Technical Specification Bending length: 1020 mm