UMENJA

Mexpol TUB 630 B

Stanje: rabljeno, various types available Kdjdpfx Aedc A Sbjf Tog

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: 01-15792, Offer 24194 Technical Specifications: - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 - 135° - Bending angle lockable with end stop - Upper beam operated by side hand crank - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending operation assisted by eccentric weight - Required space: approx. W 3250 x H 1250 x D 450 mm - Weight: approx. 1620 kg Kdedpfx Astylgusf Tsg

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Kdedpfx Afekvnumj Tjg Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: rabljeno, Leto izdelave: 1986, Sheet thickness 6.0 mm Pressure 18 t Shearing angle - upper blade 90° Blade length 225 x 225 mm Operating voltage 380 V Total power requirement 5.5 kW Machine weight approx. 650 kg Space requirement approx. 1.10 x 0.80 x 1.05 m Kodeg Ip Efspfx Af Todg - Adjustable angle stops

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Kdedpfx Afew Dvkae Teg Machine weight approx. 2500 kg Technical Data – Main Specifications: - Table surface: 605 x 300 mm - Max. table longitudinal travel (manual): 750 mm - Table cross travel: 340 mm - Grinding height between table and new grinding wheel min./max.: 22.5 / 322.5 mm - Standard size of magnetic chuck: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X axis / Longitudinal travel: - T-slots (number x width): 3 x 17 mm - Table feed, hydraulic: 0.3 – 25 m/min - Travel per handwheel revolution: 47 mm Y axis / Vertical travel: - Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm - Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Dial graduation on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes: 0 – 5 - Rapid traverse: 400 mm/min Z axis / Cross travel: - Automatic cross feed, intermittent: 0.5 – 20 mm - Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min - Travel per handwheel revolution: 5.0 mm - Dial graduation on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 min⁻¹ Accessories: Various grinding wheels Documentation

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1991, najv. debelina jeklene pločevine: 16 mm, dolžina rezanja (maks.): 6.000 mm, HIDRAVLIČNE ŠKARJE LVD MVSB 62/16 Serijska številka: 18478 Leto izdelave: 06/1991 TEHNIČNE SPECIFIKACIJE Maks. debelina pločevine St45: 16 mm Dolžina reza: 6200 mm Razdalja med stebri: 6400 mm Izmaknjenost (grlo): 60 mm Območje zadnjega odmika: 1000 mm Kdjdpfxsumhm Aj Af Tog Min. kot rezanja: 0,5 ° Maks. kot rezanja: 2,5 ° Min. število rezov/min.: 6 Maks. število rezov/min.: 25 Min. zračnost nožev: 0,05 mm Maks. zračnost nožev: 1,6 mm Moč motorja: 30 kW Približna masa: 35.000 kg Dimenzije (DxŠxV): 7100 x 2400 x 3000 mm Priložena oprema: - ELGO P85 “GO-TO” krmilnik za zadnji odmik - Električna nastavitev zadnjega odmika do 1000 mm - 1x čelna podpora 2 m, ena s 90° kotno roko, čelna podpora L2000 mm - Nožno stikalo - Kroglični ležaji na mizi - Nastavljiv zadnji odmik z ročno hidravlično črpalko

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Technical Specifications: Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical upper roll: 70 - 185 mm Diameter of lateral and central lower rolls: 105 mm Cone bending device Kdsdpfx Afew An Uhj Tog Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very lightly used, as-new condition The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: rabljeno, Leto izdelave: 1995, premer struženja nad ležiščem sani: 500 mm, Universal lathe Make: ZMM, Model 500 Year: 1995 Technical Data Ksdpfx Aowudhusf Tsdg Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed:500 mm Spindle bore: 73 mm Dimensions (LxWxH): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live centre • Coolant pump • Machine lamp All information is without guarantee. A powered demonstration is possible at any time in our showroom.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, pritisk: 13 letvica, obratovalni tlak: 13 letvica, 1 used steam boiler ----- Manufacturer : LOOS, Gunzenhausen Ksdpfsv I Rpajx Af Tedg Model : U-HD Heating surface approx. : 53 sqm Capacity : 3,200 kg/h Max. operating pressure : 13.00 bar Test pressure increased : 24.05 bar Water content at NW approx.: 2,650 l Total water content approx.: 3,770 l Year of manufacture : 1996 Equipped with Weishaupt dual-fuel burner for gas/oil, gas control line, control cabinet (mounted on the boiler body), feed water pump, and the existing coarse and fine fittings.

Stanje: rabljeno, Leto izdelave: 1961, Ram weight: 750 kg Ram stroke: 660 mm Blow rate: 100 /min Blow energy: 2040 kJ Distance under bolster / lower edge of ram guide: 6600 mm Kdedpfx Asvuullef Tsg Reach: 750 mm Steel forging – rectangular up to 240 mm Steel forging – diameter up to 270 mm Drive power: 75.0 kW Hammer weight: 16.5 t Anvil weight: 15.5 t Total weight: 32.0 t Space requirement (W x D x H): 3.2 x 1.45 x 3.45 m Forging hammer Operating principle: pneumatic Can only be offered in our warehouse without commissioning – video from the seller available before disassembly.