Obroba

Meuser Durchmesser 350 mm

Stanje: novo, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over cross slide: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore: Ø 105 mm Spindle speeds: 12 steps (36 - 1600 rpm) Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Todpfx Abehhm Edjgof Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: - Longitudinal and cross feed - Rapid traverse in both longitudinal and cross feed - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (metric/inch/module/DP threading possible) - Quick-change tool post, type Multifix - 2-axis digital readout (Brand: Sino) - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock) - 4-jaw chuck Ø 400 mm, bore 105 mm (Camlock) - Faceplate Ø 630 mm (Camlock) - Steady rest Ø 120–260 mm - Follower rest Ø 20–80 mm - Coolant system

Stanje: zelo dobro (rabljeno), Four-jaw chuck, make Roto Record Model DHK 315 x 4 Short taper size 8 Taper diameter 139.735 mm Bolt circle diameter 171.4 mm Tedpfx Abeg Rxh Ijgof Diameter 315 mm Jaws individually adjustable

Stanje: novo, Number of positions: 65 Hole diameter: 28 mm Condition: New Weight: 49 kg Basic Set 3: 69-piece, 28mm system, consisting of: Clamps: 10 x 280604 Pins: 18 x 280511 Stop: 10 x 280420.N Angle bracket: 6 x 280110.G Angle bracket: 4 x 280162.N Threaded pins: 8 x 280543 Stop: 8 x 160415 Stop: 4 x 284050 Accessory set: 1 x 163999 Todpfxsupw Sts Abgsf Price is exclusive of packaging and shipping.

Stanje: novo, Number of positions: 77 Weight: 146 kg Todpeupw Rvofx Abgof Condition: New Hole diameter: 28 mm Set 3: 77-piece, 28 mm system, consisting of: Clamps: 10 x 280610.N Clamps: 6 x 280630.N Prisms: 4 x 280648.1.N Pins: 24 x 160511 Magnetic pins: 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle brackets: 6 x 160110.N Angle brackets: 2 x 280152.N Angle brackets: 2 x 280162.N Angle bracket: 1 x 280166.N Angle bracket: 1 x 280167.N Accessory set: 1 x 283999 Price quoted exclusive of packaging and transport.

Stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 70.0961.000.253, TEHNIČNI PODATKI: Premer struženja: - Nad posteljo: 800 mm - Nad sani: 560 mm - Premer čeljustne plošče: 750 mm Tjdpfxjup A Rzj Abgsf Višina konic: - Nad ravnimi vodili: 380 mm - Nad prizmatničnimi vodili: 358 mm Odmik (gap), postelja in vstavni kos: - Premer struženja v odmiku: 980 mm - Širina odmika pred čeljustno ploščo: 380 mm - Nihaj v odmiku: 1040 mm - Širina odmika pred čeljustno ploščo znotraj nihajnega premera: 330 mm - Širina postelje: 560 mm Vreteno glave: - Premer izvrtine vretena: 90 mm - Premer vretena v sprednjem ležaju: 145 mm - Konus v vretenu: 6 Morse Obrati vretena: - Število: 18 - Območja vrtljajev vretena: 7,1 - 355 min⁻¹ 9,0 - 450 min⁻¹ 11,2 - 560 min⁻¹ Potrebna moč: 7,5 – 14 kW Pomiki: - Število: 32 - Pomiki vzdolžnega vozička na obrat: 32 vzdolžnih pomikov: 0,071 – 2,5 mm/obr. 32 prečnih pomikov: 0,04 – 1,4 mm/obr. Dodatno: dodatna oprema, navodila za stroj

Stanje: rabljeno, Leto izdelave: 1998, Tehnične podrobnosti: Notranji premer: 63 mm Zunanji premer: 800 - 320 mm Globina brušenja: 380 mm Dimenzije brusnega kolesa: Ø 65 x 25mm (posodasto kolo) Tjdpfx Asu Ngauebgsf Podajalna hitrost: 0,05 - 0,40 obr/min / 8-stopenjska obr/min Skupna potrebna moč: pribl. 1,1 kW Teža cca: 1060 kg Mere stroja cca. DxŠxV: 1,1 x 1,1 x 1,4 m Stružnica in brusilni stroj za zavorne bobne in kolute - Max./min. premer struženja in brušenja: 800 / 320 mm - Vpenjanje zavornega bobna: 63 mm, hod pinole 120 mm - Vzdolžna pomikalna miza: vzdolžna pot 380 mm; prečna pot 200 mm - Nosilec za brušenje: prečni hod 60 mm; motor = hitrost vrtenja 3410 obr/min - Upravljanje preko kontrolne plošče

Stanje: skoraj kot novo (rabljeno), premer struženja: 1.500 mm, MAXIMUM WORKING DIAMETER: 1600 mm. MAXIMUM WORKING LENGTH: 3000 mm. SPINDLE DIAMETER: 83 mm. OUR MACHINE IS FULLY OPERATIONAL AND PROBLEM-FREE. ALL SPEEDS AND AUTOMATIC FEEDS ARE IN VERY GOOD CONDITION. Tedpfx Ajr Ui R Nebgjf

Stanje: rabljeno, Tischgröße unten: 1120 x 1250 mm Tsdj Dv Nxepfx Abgjf Technische Merkmale: * Hub auf/ab: 1000 mm * Hub vor/zurück: 1200 mm * Hub links/rechts: 1000 mm

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 Tsdpfx Ajwbh Ifebgjf ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.