UMENJA

Meuser & Co M IV S

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.700 mm, pomik osi Y: 2.250 mm, pomik po osi Z: 1.300 mm, skupna širina: 3.000 mm, skupna dolžina: 8.710 mm, skupna višina: 5.250 mm, premer vretena: 130 mm, obremenitev mize: 16.000 kg, dolžina mize: 2.200 mm, širina mize: 2.200 mm, skupna masa: 40.000 kg, Accessories: 2 different heads Nwedpfsw Hr Hpox Adyeb 1 faceplate

Stanje: novo,

Stanje: pripravljen za uporabo (rabljen), Technische Daten: Geschwindigkeit – 130 m/min, Baujahr – 2006, Auslauftisch – 6 m, Drahtdurchmesserbereich: 4–12 mm. Nedpfxotndgps Adyjwb

Stanje: dober (rabljeno), premer brušenja: 1.600 mm, dolžina brušenja: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 hydrostatic steady rests Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Centre height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Dimensions (approximate): Length: 15100 mm Width: 5500 mm Njdpfxsvvvw Es Adyjwb Height: 3550 mm Weight: 120,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Stanje: rabljeno, Leto izdelave: 1985, Swing diameter over bed: 810 mm Maximum swing diameter over cross slide: 560 mm Distance between centers: 00 mm Bed width: 480 mm Cross slide travel: 400 mm Top slide travel: 180 mm Turning tool shank cross-section: 32 x 25 mm Drive power: 22 kW Spindle torque: 30 Nm Spindle nose size: 11, DIN 55027 Spindle diameter at front bearing: 152.4 mm Spindle bore: 106 mm Speed range: 9 - 1800 rpm Number of speeds: 24 Longitudinal feed: 0.092 - mm/rev Cross feed: 0.046 - mm/rev Metric threads: 0.5 - 112 mm Inch threads: 1/4 - 56 TPI (G/1") Thread module: mm Thread DP: 1 - 224 pitch Tailstock quill diameter: 115 mm Quill stroke: 225 mm Quill taper: MK 6 Workpiece weight between centers, max.: 00 kg Workpiece weight, max. (unsupported): 750 kg Röhm 3-jaw chuck, Ø ... Machine dimensions approx.: 4600 x 1900 x 1600 mm Weight approx.: 4300 kg Number of feed and thread pitches: 99 Distance between centers: 00 mm Nedoxn Ty Repfx Adyjwb Accessories: - 3-axis digital readout - Mobile chip guard along the entire length (plexiglass) - Coolant system - Rapid traverse in Z and X axes - Multifix toolholder, size C, with 6 interchangeable cartridges - Bed stop with micrometer adjustment - Fixed steady rest - 300 mm - Taper sleeve for main spindle MK 6 - Live center (cone center) MK 6 Bed guideways in very good condition!

Stanje: novo, Column Drilling Machine Brand: ALZMETALL Model: AX 3 iTRONIC-V Year of Manufacture: 2023 Condition: New machine Speed range: 80 – 1,125 rpm Standard features: - 7” TFT LCD display with touch function: Manual input of spindle speed setpoint, Display of actual spindle speed, Integrated drilling depth indicator with touch zero point adoption, Virtual drilling depth scale on the display, Machine status and warning messages shown on display, service information, Selectable user languages: DE/EN/FR/ES/IT/NL/RU. - Tapping device - Infinitely variable speed adjustment via lever - Digital speed display - Three separate buttons for clockwise – counterclockwise – stop - Clockwise and counterclockwise rotation via contactor control - Automatic drill feed with feed overload protection - Spindle guard - Operating manual Nsdpfjh I N Trjx Adyewb Other important technical data: - Drilling capacity in ST 60: 40 mm - Quill stroke: 120 mm - Spindle taper: MK 3 - Column diameter: 115 mm - Feed: 0.1 + 0.2 mm/rev - Motor power: 1.45 / 1.9 kW - Table dimensions: 515 x 360 mm With the following options: - LED machine lamp - Foot switch, supplementary to tapping device - Technology calculator in the display - Fine drill depth adjustment and fixed stop

Stanje: rabljeno, Leto izdelave: 1995, premer struženja nad ležiščem sani: 500 mm, Universal lathe Make: ZMM, Model 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed:500 mm Spindle bore: 73 mm Dimensions (LxWxH): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live centre • Coolant pump • Machine lamp All information is without guarantee. A powered demonstration is possible at any time in our showroom. Nwodpfxowudhue Adyob

Stanje: rabljeno, Leto izdelave: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over slide: 520 mm Turning length: 2500 mm Slide travel Z-axis, saddle: approx. 500 mm Slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-direction, longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-direction, cross: 0.070 - 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-position tool post Steady rest Ø 250 mm, closed Nedpfx Aju Tq U Iedyowb Accessories: Four-jaw chuck Ø 630 mm

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 330 mm, izvrtina vretena: 78 mm, premer struženja nad ležiščem sani: 520 mm, višina središča: 260 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.160 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.810 kg, nosilec puše: MK 4, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Centre height: 260 mm Centre distance: 1000 mm Spindle bore: 78 mm Spindle nose to DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Equipment includes: - Infinitely variable speed control - Hardened and precision-ground Z-axis guideways - Turcite coatings (on the counter-surface) of the carriage and cross slide - Manual central lubrication with a pump for the longitudinal and cross slides - Complete coolant system with rear splash guard and splash guard on the carriage Nwsdpfxjh Rvxhj Adyjb - Chuck guard - Control rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine mounting plates

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Weiler C30 x 750 Precision Lathe (2007) Manufacturer: Weiler Model: C30 x 750 Year of manufacture: 2007 Availability: Multiple machines available Condition: Very good, used, from training workshop, last serviced 09/2024 Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Cross slide travel: 180 mm Bed width: 240 mm Tool shank section: 20 x 20 mm Spindle nose as per DIN 55027 Gr.5 Front bearing spindle diameter: 70 mm Spindle bore: 40.5 mm Main spindle taper: 5 mm Drive power 60 %/100 % DC: 9/7 kW Total speed range: 1 - 4,500 rpm Longitudinal feed force: 6,000 N Face feed force: 3,000 N Nwodpfxexd Tiwj Adyjb Feed range: 0.001 - 10 mm/rev Rapid traverse longitudinal/cross: 6/3 m/min Metric threads: 0.1 - 400 mm Inch threads: 56 - 1/4 TPI Module threads: 0.125 - 28 mm DP threads: 224 - 1 Dp Max. number of threads: 99 Quill diameter: 50 mm Quill stroke: 130 mm Quill taper: MT3 Length: 1,750 mm Width: 1,350 mm Height: 1,670 mm Weight: 1,300 kg Scope of delivery: Rota S Plus 200-52 3-jaw chuck Multifix quick-change toolpost Machine lamp Coolant unit Machine feet Original documentation Weiler maintenance log 09/2024